Related
Does anyone know how to test if a bootable sdcard with nookie honeycomb actually works before you test it out on the nook color? thnx
btw i used the process that was on this site http://theunlockr.com/2011/02/07/how-to-load-honeycomb-android-3-0-on-the-nook-color-usd-method/
Not sure why you need to test it before putting it in the nook. If you're worried about doing any harm to the nook it's really not possible. Just put the card in and try to boot. If it doesn't boot take the card out and boot up normally, no harm no foul.
ryspy8492 said:
Not sure why you need to test it before putting it in the nook. If you're worried about doing any harm to the nook it's really not possible. Just put the card in and try to boot. If it doesn't boot take the card out and boot up normally, no harm no foul.
Click to expand...
Click to collapse
I second this. By default, all the Main Roms for Nookie Froyo and Nookie Honeycomb have no features enabled that will touch your Nook Color. The only thing it touches on the NC is the Cache Partition in order to prevent too many writes to the SD and to also speed things up. Anything done there won't screw up your NC in a Million years and Switching back to Stock and doing a few things will wipe any evidence. Or if really paranoid you can Flash back to Factory to ensure all is wiped.
____________________________________________________
Sent from Nookie Froyo using Tapatalk
thnx u guys, But i have another problem. i succesfully installed the honeycomb and got it to work on the nook color. But when I go to my computer with the sd card plugged in, it says that i only have 115 mb of data on the card. I have an 8 gb card. It's not left on the card, it says 115 mb out of 115 mb of data, even after i deleted everything. Anybody know how to restore it back to the 8 gb data amount thnxx
NookColor Format and partition your SD card back to a usable state
Opinion
Since the OP seems to have been answered, I'd like to piggy back a bit
Been doing some reading on the forums and I have started to vision myself getting in to the nook color honeycomb idea.
But a few questions first...
How well has it worked for anyone who has tried, is it a daily driver yet or too many issues? I have a SGS captivate so I am not too worried about having to mess with it before it works and I can use my phone to access email and all that.
But is it quick and snappy or will I feel like i'm using an underpowered device after using my phone.
And battery life, is it good, acceptable, or what?
Sorry if these have been answered somewhere else i tried to find the answers, but it's getting late and I have work yet to do tonight.
I installed it to emmc..over clocked it's still sluggish. Kinda cool but not a keeper to me.my droid x blows it away on performance. I will be back on phiremod beta 2 soon. Honeycomb is fun to tinker but not primetime. Remember it is not from aosp..missing features. It is amazing how good it isconsidering.
Well...its very promising for being in the early stages of development
Sent from my ncusing XDA App
Will i still have honeycomb on my NC if i format it?
Sent from my NC using XDA App
jlt220 said:
Since the OP seems to have been answered, I'd like to piggy back a bit
Been doing some reading on the forums and I have started to vision myself getting in to the nook color honeycomb idea.
But a few questions first...
How well has it worked for anyone who has tried, is it a daily driver yet or too many issues? I have a SGS captivate so I am not too worried about having to mess with it before it works and I can use my phone to access email and all that.
But is it quick and snappy or will I feel like i'm using an underpowered device after using my phone.
And battery life, is it good, acceptable, or what?
Sorry if these have been answered somewhere else i tried to find the answers, but it's getting late and I have work yet to do tonight.
Click to expand...
Click to collapse
i use honeycomb as a daily driver and if you install V2 on the emmc from samuallhaff(not 100% sure of his username off the top of my head) it runs smooth and it is really clean
i get the stock all day battery life(mainly it just sits in my bag when im in class but i have wifi always on so i dont disconnect from my schools wifi) and web browsing is amazing(it doesnt have flash though not a deal breaker though imo)
just dont use live wall papers and set CPU because they drain battery life faster and they diminish performance big time
bratliff said:
I installed it to emmc..over clocked it's still sluggish. Kinda cool but not a keeper to me.my droid x blows it away on performance. I will be back on phiremod beta 2 soon. Honeycomb is fun to tinker but not primetime. Remember it is not from aosp..missing features. It is amazing how good it isconsidering.
Click to expand...
Click to collapse
if you have setCPU or a live wallpaper installed on honeycomb it diminishes performance by 100%
i noticed this performance boost after i uninstalled setCPU and removed my live wallpaper from my honeycomb install and so far it has been great
luigi90210 said:
i use honeycomb as a daily driver and if you install V2 on the emmc from samuallhaff(not 100% sure of his username off the top of my head) it runs smooth and it is really clean
i get the stock all day battery life(mainly it just sits in my bag when im in class but i have wifi always on so i dont disconnect from my schools wifi) and web browsing is amazing(it doesnt have flash though not a deal breaker though imo)
just dont use live wall papers and set CPU because they drain battery life faster and they diminish performance big time
if you have setCPU or a live wallpaper installed on honeycomb it diminishes performance by 100%
i noticed this performance boost after i uninstalled setCPU and removed my live wallpaper from my honeycomb install and so far it has been great
Click to expand...
Click to collapse
I will remove set cpu and report back. I thought it was needed for oc.
tylrdoan said:
Will i still have honeycomb on my NC if i format it?
Sent from my NC using XDA App
Click to expand...
Click to collapse
I just realized that you are running HC from your SD card.
No, if you format that SD card, you lose HC. It actually mentions that in the procedure you linked in your original post.
The reason you only see 115MB on the card when you mount it on your Windows computer is because Windows can only see the first partition, the boot partition, that was written to that SD card as part of the procedure you followed. The rest of the space is taken up by partitions Windows can't see without help.
So if you want to continue to run HC off the SD card you have to dedicate that SD card just for running HC.
SD Card Partitions
while installing the image 3 patitions will be written on your sd-card.
1) root partition
2) honeycomb
3) fat32-partition
to use the full size of the sd-card use a partition manager to extend the fat32-partition.
installed apps can than transferred to the fat32-partition
fugitoid said:
I just realized that you are running HC from your SD card.
No, if you format that SD card, you lose HC. It actually mentions that in the procedure you linked in your original post.
The reason you only see 115MB on the card when you mount it on your Windows computer is because Windows can only see the first partition, the boot partition, that was written to that SD card as part of the procedure you followed. The rest of the space is taken up by partitions Windows can't see without help.
So if you want to continue to run HC off the SD card you have to dedicate that SD card just for running HC.
Click to expand...
Click to collapse
i was wondering if i put honeycomb on my nook color, not on the sdcard, how would i do it. The instructions on that site only says how to make a bootable sd card. And i was using HC on a level 4 sd card and it said that u need a level 6. But i was still able to get it to run. The honeycomb on the sd card level 4 was pretty slow. i was wondering if i got it on my NC, would it be faster. If it would, can someone show me how?
Just follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=947071
bratliff said:
I will remove set cpu and report back. I thought it was needed for oc.
Click to expand...
Click to collapse
Nope lots of lag still. Its ok not complaining. Lots of fc in dolphin too. Back to phiremod 2.2 for awhile.
You have to remember that the Honeycomb that was Ported is the Preview Release, think Demo version. It wasn't ported from (pretty much)scratch like Froyo was. It is more of a Rom hack. For a better performing version we have to wait for Honeycomb's Official Full release. In perspective, it's amazing how much deeper-blue got done with just the Preview image.
____________________________________________________
Sent from Nookie Froyo using Tapatalk
GonzoTheNose said:
while installing the image 3 patitions will be written on your sd-card.
1) root partition
2) honeycomb
3) fat32-partition
to use the full size of the sd-card use a partition manager to extend the fat32-partition.
installed apps can than transferred to the fat32-partition
Click to expand...
Click to collapse
Not picking on you but it's actually 4 partitions.
1=Boot (Basically redirects to the Android on the SD)
2=System (Holds the main OS files of Honeycomb)
3=Data (Where all you're settings and other data are)
4=SDcard (This partition is used as a stand in for a Physical External SDcard)
Also the easiest/simplest way to access the 2, 3, and 4 partitions is to use linux. Burn a LiveCD if you don't want to Install, although Ubuntu can be Installed without Partitioning or other such normal 2nd OS needs. Just get the Windows installer from http://ubuntu.com
____________________________________________________
Sent from Nookie Froyo using Tapatalk
SD Card and Honeycomb 3.0 v4 image
I've been looking for an answer throughout the forums on this question but can't seem to find anything. The problem: I used the Honeycomb v4 image with WinImage. The SD card was originally 8 GB. The image file is 4 GB with approximately 600 MB or so of free space. Missing: 4 GB that was on the card.
1. Can I use a utility under Windows to get the free space allocated on the SD card that remains? If so, how?
2. Is there an option with WinImage to allocate the additional space on the SD card as free space and include it as part of the image that is being written to the SD card?
3. If I need to restore my SD card back to 8 GB, can that be done in Windows Explorer (not sure that Windows will pick up the full 8 GB as I haven't tried that yet).
Thanks.
Ohh, you have that problem. Don't know where you've been looking but that has been asked and answered many times. The problem is that when you install Froyo or Honey to the SD it makes 4 partitions like I listed above, but Windows can only see the First Partition and only Formats the First partition. The easiest way to fix is to put it in UnRooted Stock and Format it from Settings. If you don't have that you can Burn a Linux or GParted Live CD and Format it from their.
____________________________________________________
Sent from Nookie Froyo using Tapatalk
Hi all,
After reading all the great stuff about the NC recently, CM7, Phiremod and the honeycomb releases Ive convinced a mate of mine in California who's visting the UK to bring me one over to tinker with..
Now.. After doing some research Im overwhelmed with info and thought Id ask for "up to date" pointers..
1. Is there a straightforward guide to rooting and installing the NC, as I live in the UK Im not fussed about the original NC rom. I've seen Cyanogenmods wiki entry http://wiki.cyanogenmod.com/wiki/Barnes_&_Noble_Nook_Color:_Full_Update_Guide is this the best approach?
2. Which rom is best? Plain CM7, Phiremod or Honeycomb as posted by deeper blue?
3. Any other pointers?
Sorry for such basic questions, im just overloaded and not 100% sure which is the best process to take.
thanks all in advance
Angelo
Take a look in the stickies, there are comprehensive guides to root....just make sure you're using the correct version. If your mate is buying a brand new one for you, you'll most likely need the version for rooting with partitions. I have used all 3 of the roms you mentioned and my personal preference is CM. Phiremod is just a heavily themed version of CM and the honeycomb build is ok, but it lacks some features and is still a bit buggy because the source code has not been released for honeycomb
Sent from my DROIDX using XDA Premium App
If you decide on CM7 (which I personally recommend), I would look for "How to Install CynaogenMod 7 on the Nook Color" (can't post links) on YouTube. I personally found it very useful. If something seems off, make sure you look at the description and read some user comments. With the way this guy explains it it's practically idiot proof and it's unlikely you'll mess anything up.
thanks
Thanks Guys,
I've been doing more reading and yeah looks straightforward..
Considering Im not interested in the core B&N OS, I was thinking of installing CM7 to the internal memory and then perhaps installing Honeycomb (deeperblue version) on a memory stick to "play with".
From what I can tell the HC port is nice as a toy but not robust enough considering HC hasnt been released to AOSP.
Makes sense?
If you are looking to 'play with' honeycomb on a MicroSD install, check out http://forum.xda-developers.com/showthread.php?t=1045018
You get Honeycomb and Phiremod in a dual-boot image tailored for a MicroSD install.
Read through the thread and see if it's to your taste.
For the most usable ROM, go with CM7. Just follow this guide in this post. Very simple.
http://forum.xda-developers.com/showthread.php?t=1030227
The only issue is if you have a "blue dot" with the newer partition. Just read the RED text at the beginning of that post.
After you get this running, you can read up a little more and create a SD card w/ Honeycomb or Phiremod to play around with. But CM7 is the most stable out there (well, I guess Phiremod is good to, because it is a customized CM7).
Good Luck.
Use CM7, it's the best for now.
HC is beauty but still a lot of work to be done.
jasoraso said:
For the most usable ROM, go with CM7. Just follow this guide in this post. Very simple.
http://forum.xda-developers.com/showthread.php?t=1030227
The only issue is if you have a "blue dot" with the newer partition. Just read the RED text at the beginning of that post.
After you get this running, you can read up a little more and create a SD card w/ Honeycomb or Phiremod to play around with. But CM7 is the most stable out there (well, I guess Phiremod is good to, because it is a customized CM7).
Good Luck.
Click to expand...
Click to collapse
+1 for this guide!
"The only issue is if you have a "blue dot" with the newer partition. Just read the RED text at the beginning of that post."
For some reason I thought that statement was obsoleted, am I wrong?
It was valid if you have v1.2 NC and flashing with CwM Recovery prior to v3.2.xx.
But since the instructions do indicate using v3.2.0.1 CwM, then why care about blue-dot or not since it has been taken care off unless v3.2.x.x not properly does the job.
Maybe because you have a choice in partition schemes?
You really will want to repartition the new nook. 1 gb is a very small partition for your programs. 5gb works much better and the change is fairly painless.
Sent from my NexusOne using Tapatalk
IFLATLINEI said:
Maybe because you have a choice in partition schemes?
Click to expand...
Click to collapse
That's a reasonable reason but again, it shouldn't be highlighted in RED, ORANGE at best
In fact, since it's a choice of good, it should be in GREEN.
thanks guys
Thanks guys, Im in awe with all the feedback and comments this thread is getting..
yes, Ive received the NC today and its charging Also doing loads and loads of reading
My nook does have a bluedot so my partitions are 5gb Data/1Gb Media.
I'll probably leave it like so, considering CWM supports this now its ok, and put most of my media on an external 16gb microsd card..
If Im right I can still install apps into the 5gb partition right?
Also , if I understand it correctly I can actually install CM7 onto a microSD and simply boot from this right ,without rooting/installing CWM... ?
Angelo
asantaga said:
If Im right I can still install apps into the 5gb partition right?
Also , if I understand it correctly I can actually install CM7 onto a microSD and simply boot from this right ,without rooting/installing CWM... ?
Angelo
Click to expand...
Click to collapse
You can still install apps into the /data partition but pls note: if your NC isn't rooted, you can only install apps that offered by B&N. You do not have full access of Android Market.
About CM7, yes, you can run CM7 off uSD and not touching the eMMC (aka internal memory) at all. Be considered getting a Sandisk (class 2 or class 4)
B-i-g thanks
All,
BIG Thanks to everyone,
I've successfully (actually flawlessly), repartitioned my nook to the old standard and installed CM7 into the internal memory..
All flawlessly. Also ordered a sandisk 16gb memory card from amazon.co.uk, so that will hold most of the media..
I was considering making the main partition >1Gb (1.9Gb) but decided to leave it as it is for now.. It was so easy yo tweak I thought Id try it vanilla and then grow if I need to..
Awesome-ness
ok wheres my 5gb?
ok got one question now..
/media is supposed to have 5gb available..
CM7 doesnt appear to allow me to use it as a SD card.. but ive found it mounted as /mnt/emmc
How does one use it ??? I tried downloading pdfs and I was told that an SD card was required for this... :-( when i get home I was going to try mounting it via usb to a computer but is that the only way?
There are 2 things you need to know
1. If you're running CM7, you MUST have a uSD. "MUST" does seem to be a strong word but for some reason, that I still try to figure out, an external uSD is required. W/o it, you can still using it but there's some apps won't run if no uSD plugged. It means the NC works 99.9% w/o uSD. I guess I should take the "MUST" back, ehhh
2. If you're running the recently nightly-build CM7, the USB storage utitlity should already be implemented within the ROM. All you need to do is
1. Connect NC and PC via USB cable
2. by this time, the usb indicator should be appeared on the NC, tab on it
3. Tab on Connect USB to transfer .......
4. Turn USB Mass Storage on
5. by this time, PC should recognize the /media on the NOOK
6. do what you want to do
votinh said:
There are 2 things you need to know
1. If you're running CM7, you MUST have a uSD. "MUST" does seem to be a strong word but for some reason, that I still try to figure out, an external uSD is required. W/o it, you can still using it but there's some apps won't run if no uSD plugged. It means the NC works 99.9% w/o uSD. I guess I should take the "MUST" back, ehhh
2. If you're running the recently nightly-build CM7, the USB storage utitlity should already be implemented within the ROM. All you need to do is
1. Connect NC and PC via USB cable
2. by this time, the usb indicator should be appeared on the NC, tab on it
3. Tab on Connect USB to transfer .......
4. Turn USB Mass Storage on
5. by this time, PC should recognize the /media on the NOOK
6. do what you want to do
Click to expand...
Click to collapse
Wicked, yeah didnt see the little icon down below
thanks
Hey Angelo, I just wanted to share my experience.
I love gadgets, and tinkering with gadgets. I am an IT manager/minor programmer/webmaster, etc. etc... so no surprise that I feel right at home here BUT, I also love to read and I think that the Nook app for Android is bunk (e.g. "poor") compared to the stock NC experience.
I decided pretty early on that I wanted to keep the NC stock (partially due to warranty) and have a dual boot option for CM7. I had initially installed CM7 on my NC, replacing the stock rom all together. I ended up putting the stock ROM back on.
Here is a post from another thread where I outline that experience...and the guides that I use.
I talk about partitions in that post, since you have a new NC, don't even bother yourself with that...just note the guides there that will get you where you want to go, either way....
asantaga said:
ok got one question now..
/media is supposed to have 5gb available..
CM7 doesnt appear to allow me to use it as a SD card.. but ive found it mounted as /mnt/emmc
How does one use it ??? I tried downloading pdfs and I was told that an SD card was required for this... :-( when i get home I was going to try mounting it via usb to a computer but is that the only way?
Click to expand...
Click to collapse
Many (older) apps in on Android are designed to ONLY look for storage called "sdcard". So your 5gb of internal (emmc) called "Media" will not be able to be utilized by those Apps.
Apps that are better programmed and designed can access the memory called "Media".
As an original Nook Color owner from its first day availability, I am now ready to make the leap to the HD+. My primary reason for this is the 8.9 inch screen which emulates "trade paperback" size which has always been my reading goal along with enhanced video.
I have put my NC through numerous iterations over the last two years plus and finally did a full conversion to Android 4.1 a few months ago bidding a permanent farewell to any remaining vestige of the BN software. As the final remaining issue for me was "reading in store" which I no longer need, it was not a difficult decision.
In perusing this forum, I appear to have run afoul of trying to determine if there is a currently viable track for complete conversion of the HD+ eMMc as I simply do not need or want the BN interface. I know full well there are rooted, sdcard, and "hybrid" variations well explained in this forum but simply cannot find or continue to overlook any mention/instruction for full internal conversion as an option.
Am I simply overlooking that info or are we not yet there? If that goal has not yet been obtained, what would be my closest non sdcard option?
I have nothing but accolades and praise for those providing us with the fruits of their efforts. My multiple and varied experiences with my NC provided a truly fascinating experinece and learning curve starting with basic rooting up through several dual boot variations and now in eMMc Jelly Bean and all of its remarkably functional glory! It is clearly continuing with the HD and the "+" and I wish to express my deepest thanks for those continuing efforts in advance.
Any reasoned advice, suggestions, and/or direction would be appreciated.
As yet there is no full replacement of the emmc. The boot loader lock that even checks system makes it very hard.
Sent from Droid 4 Running Codename Android
Verygreenhas said he believes it is possible but not on his priority list, see his CM10 thread. We don't have many developers working it yet. And being CM working properly, kernels, etc are priorities now.
Sent from my BNTV600 using xda app-developers app
I too came from the Nook Color and have enjoyed the versatility of that device. Unfortunately B&N has locked down this device to make it more difficult to modify it. Your only two choices now is to modify stock with my CWM zips or opt for running CM10/CM10.1 from SD. You can get my CWM zips from my HD/HD+ CWM thread linked in my signature.
Sent from my HD+ running CM10 on SD with XDA Premium
Get the HD+ and put cm10 via sdcard on it. If you use the right sdcsard (class 4? someone will correct me if I'm wrong) and dont look back. I came from the nook color 10.1 emmc myself. I know how soul crushing it was on there. Lag, reboots, lag, poor display, lag. Did I mention lag? I'd like an emmc too, but seriously you won't notice any difference. Its an amazing tablet with cm10 on it.
Sent from my Barnes & Noble Nook HD+ using Tapatalk HD
I have also had the Nook Color and the Nook Tablet.. the Nook HD/HD+ are awesome. I have always choose to ditch the stock B&N expereince. Currently booting CM10.1 from mircoSD on my NookHD, thanks to some awesome work by others, and its honestly great! maybe a few tiny little lags every now and then, but nothing close to a deal breaker. And its still early... so it can only get better from here. Going HD or HD+, you won't be dissapointed.
Actually this is strange that we dont have still bootloader lock hack. All tech things that i seen on xda forum are ulocked. And now some BN can lock it
I want help but i dont have knowledge for this stage. And with other words i need it too (run custom rom from emmc)..
datas0ft said:
Actually this is strange that we dont have still bootloader lock hack. All tech things that i seen on xda forum are ulocked. And now some BN can lock it
I want help but i dont have knowledge for this stage. And with other words i need it too (run custom rom from emmc)..
Click to expand...
Click to collapse
Verygreen says he thinks it can eventually be done, but his priority is perfecting CM on SD. He says no real need to run it internally when running on SD works so well.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Thanks and Update
leapinlar said:
Verygreen says he thinks it can eventually be done, but his priority is perfecting CM on SD. He says no real need to run it internally when running on SD works so well.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
Thanks to all for your comments, updates, and suggestions. I opted to take the "easy way out" this time around and d/l n2a's $19.99 version for the HD+ and installed it on a 32 GB card. Oddly enough, could not get it to run on a new Sandisk Class 10 but it ran on an older class 4 or 6 card that I had used for converted film storage with my NC. Any idea why that happened?
BTW, when formatting a card for the HD+ should we use FAT32 or NTSC?
It is great to have a full JB interface back!
Not at all enamored of the current BN interface which I hope now to leave alone and eventually replace when full eMMc access is achieved. If JB could be made "ready for prime time" on the NC, then I am sure that it is just a matter of time until one of you has a full blown "Eureka" moment and shows the way to a full and total conversion of the HD+.
Will keep you all up-to-date regarding my experiences with the N2A setup.
Rooted Galaxy Nexus Android 4.2.1
Nook Color Android 4.1.2
Nook HD+ N2A SD Card Android 4.1.2
harryzee said:
BTW, when formatting a card for the HD+ should we use FAT32 or NTSC?
Click to expand...
Click to collapse
You must to look to this thread. There you find all what you need and step by step.
leapinlar said:
Verygreen says he thinks it can eventually be done, but his priority is perfecting CM on SD. He says no real need to run it internally when running on SD works so well.
Click to expand...
Click to collapse
Actually i need run it internally because i have 12 Nook HD+ and clients who use these just may pull out SD (maybe steal SD too). All restrictions which one i made on ROm for user side is not working anymore.
Seems i need directly constact with Verygreen.
Thanks about sharing information.
datas0ft said:
You must to look to this thread. There you find all what you need and step by step.
Not sure what the above direction has to do with which format (FAT32/NTSC) is best for SDcard use in the HD+ for either simple storage or alternate OS.
Did I miss something or was I unclear?
Click to expand...
Click to collapse
This quote at this thread is about SD card formating:
For first time install only (you will need 4G or bigger sdcard, smaller ones are not supported and not tested):
gunzip cwm image and write it to your sdcard (entire sdcard not just one partition of it), use either dd on Linux/MacOS or Win32 Image Writer for those impaired by Windows.
Click to expand...
Click to collapse
And when you follow this guide step by step, you dont need worry about formating your SD to wrong format.
harryzee said:
Oddly enough, could not get it to run on a new Sandisk Class 10 but it ran on an older class 4 or 6 card that I had used for converted film storage with my NC. Any idea why that happened?
BTW, when formatting a card for the HD+ should we use FAT32 or NTSC?
Click to expand...
Click to collapse
Not all cards are created equal. The recommended card for running a ROM is SanDisk class 4. Others may or may not work well.
And it does not matter what format you had on the card originally before you burned the image to the card. It gets overwritten.
But for using an SD with stock, the card should be formatted Fat32 or ExFat. NTSC does not work.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Aha!
datas0ft said:
This quote at this thread is about SD card formating:
And when you follow this guide step by step, you dont need worry about formating your SD to wrong format.
Click to expand...
Click to collapse
Aha! Now I understand!!
leapinlar said:
Not all cards are created equal. The recommended card for running a ROM is SanDisk class 4. Others may or may not work well.
And it does not matter what format you had on the card originally before you burned the image to the card. It gets overwritten.
But for using an SD with stock, the card should be formatted Fat32 or ExFat. NTSC does not work.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
Many thanks for that clear explanation.
BTW, the N2A card (so far) is working well.
Anyone else experiencing an issue with the micro sd slot after rooting? it wont read the cards, but it does notice when you remove an sd card. Is there a fix for that issue and has anyone else encountered it?
dcoke said:
Anyone else experiencing an issue with the micro sd slot after rooting? it wont read the cards, but it does notice when you remove an sd card. Is there a fix for that issue and has anyone else encountered it?
Click to expand...
Click to collapse
How do you know it is not reading the card? Have you looked at ext_sdcard to see of it is there?
And how did you root 2.0.4? Most folks get automatically updated to 2.0.5.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
leapinlar said:
How do you know it is not reading the card? Have you looked at ext_sdcard to see of it is there?
And how did you root 2.0.4? Most folks get automatically updated to 2.0.5.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
feel free to steal this little tip from me:
When starting from scratch after purposefully activating the 8 Boot Fail Safe, when it gets to the part where it's looking for an update, while its looking hold down "Power" and select OK to turn the device off interrupting the update process. When you turn it back on, you'll have to start the whole thing over again, but when it gets to the Update step it bypasses it thus cancelling out the 2.0.5 mandatory update. Now that you have 2.0.4 you can run your all-in-one and update cancel program before it has a chance to try updating again.
-Another helpful hint after reverting to stock firmware, turn off your internet until you run all the rooting software.
No I didn't check to see if it showed up in a root explorer.I'll check that out.
.....
Just checked and no it doesn't come up. I even removed and reinserted the microSD in question and still nothing. The little SD logo pops up on the screen (the big blue vector image one) but it never gets read in the device in system or root explorer.
Is there a way to fix it on test disk for windows?
dcoke said:
feel free to steal this little tip from me:
When starting from scratch after purposefully activating the 8 Boot Fail Safe, when it gets to the part where it's looking for an update, while its looking hold down "Power" and select OK to turn the device off interrupting the update process. When you turn it back on, you'll have to start the whole thing over again, but when it gets to the Update step it bypasses it thus cancelling out the 2.0.5 mandatory update. Now that you have 2.0.4 you can run your all-in-one and update cancel program before it has a chance to try updating again.
-Another helpful hint after reverting to stock firmware, turn off your internet until you run all the rooting software.
No I didn't check to see if it showed up in a root explorer.I'll check that out.
.....
Just checked and no it doesn't come up. I even removed and reinserted the microSD in question and still nothing. The little SD logo pops up on the screen (the big blue vector image one) but it never gets read in the device in system or root explorer.
Is there a way to fix it on test disk for windows?
Click to expand...
Click to collapse
Your system after an 8 failed boot reset and before an update is 2.0.4? If it is, PM me as I would like to get a copy of your factory zip.
And you looked for ext_sdcard in /mnt?
Sent from my Galaxy Tab running Tapatalk
Mnt, but of Course
leapinlar said:
Your system after an 8 failed boot reset and before an update is 2.0.4? If it is, PM me as I would like to get a copy of your factory zip.
And you looked for ext_sdcard in /mnt?
Sent from my Galaxy Tab running Tapatalk
Click to expand...
Click to collapse
I found it in mnt, man they really do everything strange on Nooks, haven't had one since the original Color. I see the problem. It's lacking any sort of permissions (read, write or anything). How do I get those to stick? since I've noticed things in Root tend to not stay permanent. and as for the PM, I'll get right on that. Thanks for all of your help.
dcoke said:
I found it in mnt, man they really do everything strange on Nooks, haven't had one since the original Color. I see the problem. It's lacking any sort of permissions (read, write or anything). How do I get those to stick? since I've noticed things in Root tend to not stay permanent. and as for the PM, I'll get right on that. Thanks for all of your help.
Click to expand...
Click to collapse
SD cards do not let you make permission changes. I'm not sure why. Are you sure it does not have read write permissions? Can you create a file there?
Read my section on data structures in my HD/HD+ tips thread linked in my signature. It explains why the HD's are structured the way they are.
And thanks for working on the PM.
Fixed?
leapinlar said:
SD cards do not let you make permission changes. I'm not sure why. Are you sure it does not have read write permissions? Can you create a file there?
Read my section on data structures in my HD/HD+ tips thread linked in my signature. It explains why the HD's are structured the way they are.
And thanks for working on the PM.
Click to expand...
Click to collapse
I think I figured it out. It seems that the cwmearly builds damage the sd cards, but once reflashed with the ones on your post it gets read just fine. I wanted it fixed since I couldn't find my other SD cards and had to resort into turning a 32gb into a 4gb card to install some zips (lame) and I wanted to get it back to its 32gb glory. So by rewriting my card with your 4gb image and putting it in my nook it got read and then I just formatted it on the nook and it was back to normal, though I had another card with the cwmearly img on it and it was going back to its old ways and repeated the previous steps and it was fine. so CWMearly was the problem.
I don't know how to make a clean back up without my data on it so this one will have my personal info (no credit card info, obviously) but maybe with your skills you can scrub it out of it. I'm not that well versed in this kind of stuff. I have an above average knowledge of android, but not any real knowledge of developing or ADB.
dcoke said:
I think I figured it out. It seems that the cwmearly builds damage the sd cards, but once reflashed with the ones on your post it gets read just fine. I wanted it fixed since I couldn't find my other SD cards and had to resort into turning a 32gb into a 4gb card to install some zips (lame) and I wanted to get it back to its 32gb glory. So by rewriting my card with your 4gb image and putting it in my nook it got read and then I just formatted it on the nook and it was back to normal, though I had another card with the cwmearly img on it and it was going back to its old ways and repeated the previous steps and it was fine. so CWMearly was the problem.
I don't know how to make a clean back up without my data on it so this one will have my personal info (no credit card info, obviously) but maybe with your skills you can scrub it out of it. I'm not that well versed in this kind of stuff. I have an above average knowledge of android, but not any real knowledge of developing or ADB.
Click to expand...
Click to collapse
No I don't want your backup, I want your factory.zip from partition 7. It won't have any of your stuff on it, it is just what comes from the factory. If you don't know how to get that, I can give you instructions.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Are you sure it's 2.0.4? Any particular reason you don't want to update to 2.0.5?
leapinlar said:
No I don't want your backup, I want your factory.zip from partition 7. It won't have any of your stuff on it, it is just what comes from the factory. If you don't know how to get that, I can give you instructions.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
Any progress on getting that factory.zip? BTW, you did not say which device you have.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
I have used the information provided by leapinjar to put a CWM on an SD card and install Play store to stock.
My card is 32gb. My question is, is there anyway to bypass the Nook booting into Cyanogen and get it to go straight into the home screen when the SD card is in the NOOK.
The reason I want to do this is because I also want to use the rest of my 32Gb card for storage and I frequently shut down the Nook at the end of the day. I am finding that I have to constantly take out the SD card, let it boot up and then put it back in. Is there anyway around this?
Also unrelated: I am new to Nook. I have noticed sometimes that my Nook glitches and it is like the screen is being pressed randomly but I am no where near it. I have to sometimes reboot it to get it to work again. Is this common? Or do I probably have a faulty device?
Thanks in advance.
There is not an easy way to have it reboot to stock. The best thing is to get a smaller cheap card for the CWM and use it only for that. Then you can reuse your 32GB card for SD storage.
And the problem with the glitches is fingerprints. Just use a cloth or tissue to wipe down the screen when it does that.
Sent from my Nook HD running CM10.1 on SD
Ok thank you very much for the reply. I was also looking at installing CM10 but I am a bit overwelmed by the discussions on this and cannot seem to find an easy install of it.
Do I need to be running linux for a proper install of CM10 + GAPPs? Is there anywhere I can find a tutorial with what to install and how to do it?
Thanks in advance
arnoldsback said:
Ok thank you very much for the reply. I was also looking at installing CM10 but I am a bit overwelmed by the discussions on this and cannot seem to find an easy install of it.
Do I need to be running linux for a proper install of CM10 + GAPPs? Is there anywhere I can find a tutorial with what to install and how to do it?
Thanks in advance
Click to expand...
Click to collapse
Unfortunately on the HD+ there currently is no easy way to do it if you have windows. It is simple with a Mac or Linux. If you have some patience I am about to publish a new system of installing CM10 that will be easier for Windows users.
Sent from my Nook HD+ running CM10 on SD
leapinlar said:
Unfortunately on the HD+ there currently is no easy way to do it if you have windows. It is simple with a Mac or Linux. If you have some patience I am about to publish a new system of installing CM10 that will be easier for Windows users.
Sent from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
That's great. I don't mind installing it using a VM Ubuntu. I have this installed on my laptop. If you can point me in the right direction that would be great, otherwise I will wait until you publish your update.
Thanks
arnoldsback said:
That's great. I don't mind installing it using a VM Ubuntu. I have this installed on my laptop. If you can point me in the right direction that would be great, otherwise I will wait until you publish your update.
Thanks
Click to expand...
Click to collapse
Follow the instructions in the HD+ CM10 SD thread. The only hard part is getting the CM10 rom on the sdcard partition the first time you install. And that is easy with Linux. Just copy it to the partition.
Sent from my Nook HD+ running CM10 on SD