Database Develop

Big problem about I9000 Warrantly

Today i am going to refresh my rom . After finishing, Galaxy S can not open...
Is Galaxy S or the battery problem?
Have any method to slove this problem?
I bought from Optus in Australia
Now Version is JM5 and he old version is Jm5,if i go to the custom services ,will i cease the warrant?
Thanks everyone to help.

as long as you flashed it with a samsung-made firmware and not a custom ROM, i think your warrantly should still be ok!

If you seek help from the guys here, my guess is that you need to explain a bit more in detail what's not working, besides "cannot open".
"New version is JM5 and old version is JM5" ??

dudeldei said:
If you seek help from the guys here, my guess is that you need to explain a bit more in detail what's not working, besides "cannot open".
"New version is JM5 and old version is JM5" ??
Click to expand...
Click to collapse
"cannot open" mean when i press the turn on/turn off button don't have any respond.
"New version is JM5 and old version is JM5" That is mean Before and after flashing version, the reason of flash again is i can not use Galaxy but i can enter the download mode. i think this information may help you to find mine problems..but i am not sure.

mcall_r said:
as long as you flashed it with a samsung-made firmware and not a custom ROM, i think your warrantly should still be ok!
Click to expand...
Click to collapse
But i refresh Galaxy via Odin, is it still ok?

ososos said:
But i refresh Galaxy via Odin, is it still ok?
Click to expand...
Click to collapse
Flash I9000DTJG4 if you got your phone from Optus in Australia.
Find it here.

i cannot switch on the Galaxy S even by any modes.
Simply, i think it is broken down and I dont know what to do. I am not sure if my warrant is still effective or not.
You know, generally flash the rom will cease warrant.I think people l solve my problem there... Because Xda's is professional...

Can someone move this thread :-(
I almost fell of my chair when reading "BIG PROBLEMS WITH I9000".
Big problem with flashing you mean !!

OH.. sorry .......
Admin move to correct section.
Sorry about that

Try charging the battery. and then switch on the phone..
SGS is pretty unbrickable

No problem
I hope you find a solution quick.

1. If the phone is turned off then remove the SD card, the SIM card and the battery.
2. Put the battery in only then enter Download mode. Hold in vol down and Home buttons then press the power button. Works every time.
3. OPTUS is currently using I9000DTJG4 available here
4. Set up ODIN with the correct files. PIT 512 and the code file called ADD_OPS.tar from the download.
5. Select Re-Partition.
6. Connect your phone to your computer via USB cable. Wait for com to come up in ODIN.
7. Flash the Aussie firmware.
Wish you luck my friend.

no no no... i CANNOT OPEN SGS AT ANY MODE..
It seems sgs don't have the battery... i cannot charge the phone ..

ososos, unfortunately it sounds like a full brick to me. I think there have been about 5 occurrences of this (myself being one of them), one guy managed to get his to power on my holding home + volume down + power and inserting the battery whilst these buttons were being held.
However as a general rule if your phone won't even turn on you'll need to send your phone off for repair.

Hmmm try using some friend's battery if he too has SGS... Or try charging only the battery at optus.. GL mate..

Galaxy Tab bricked.. like really bricked

Ok guys, I feel this is just the end of the games... I was flashing back the Roto JME fw with the swype keyboard issue fixed that I have just made, when I accidentally unplugged the tab while starting flashing and in downloading mode.
Now all I get is a logo with a phone an alert symbol and a computer .
Windows as well as Odin see it, but I can't do anything, as Odin hangs on waiting for connection, or something like that.
Is there anything I can do?? Or do I really have to take it to the warranty? And if I will have to take it to the warranty will they see I have previously flashed a beta rooted image on it??
Here's what I am talking about
Please I need some help..
Thanks

Is there no recovery mode by buttons like the captivate? I hate seeing all the bricks
Sent from my SPH-P100 using XDA App

Its not bricked
heimdall close-pc-screen
should restart it
then power it off
then put it into download mode again using power + volume down
-d

Technomancer said:
Its not bricked
heimdall close-pc-screen
should restart it
then power it off
then put it into download mode again using power + volume down
-d
Click to expand...
Click to collapse
damn it says Failed to access device. Error: -12 .. I am on windows with latest version of heimdall ...

Segnale007 said:
damn it says Failed to access device. Error: -12 .. I am on windows with latest version of heimdall ...
Click to expand...
Click to collapse
Ops, it was the driver... damn windows ...
Solved btw.. I just realized I have lots of things to learn ... I have almost died of heart attack when I saw my tab stucked on that logo.. and now its back again..
Thank u falks

You need to make sure samsung kies are not running for sure unistall it and try it again

use odin. that is still download mode. might take you a couple of tries but works. i was in your shoes the other day

Everything is fixed thanks to Tecnomancer. Thank u guys
Sent from my GT-P1000 using XDA App

Could you please list the steps you went through in order to fix this - for everyone else's sake? Thx!
Segnale007 said:
Everything is fixed thanks to Tecnomancer. Thank u guys
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse

I've heard plenty of goofy stories about bricking devices over the years. You must conclude the following:
1.Flash your device in a locked room to avoid your wife/ child pulling cables or pressing buttons.
2.Don't touch anything while you're flashing. This is why many people that could help you will ignore you after reading about 'accidentally disconnected' wires - they just assume you're a moron not worth helping.
3.Read instructions carefully and write the procedure out in your own words if its your first time.
I've been flashing for years and haven't had a brick yet. Not crossing my fingers either because it has little to do with luck and much to do with care. In this way its a lot like making babies...

ftgg99 said:
2.Don't touch anything while you're flashing. This is why many people that could help you will ignore you after reading about 'accidentally disconnected' wires - they just assume you're a moron not worth helping.
Click to expand...
Click to collapse
Good advice.
My only semi-bricks (that involved an hour or two of trial and error to unbrick) resulted from some manner of overzealous cable unplugging.

zyborg said:
Could you please list the steps you went through in order to fix this - for everyone else's sake? Thx!
Click to expand...
Click to collapse
This is what I have done
Technomancer said:
Its not bricked
heimdall close-pc-screen
should restart it
then power it off
then put it into download mode again using power + volume down
-d
Click to expand...
Click to collapse

ftgg99 said:
2.Don't touch anything while you're flashing. This is why many people that could help you will ignore you after reading about 'accidentally disconnected' wires - they just assume you're a moron not worth helping.
Click to expand...
Click to collapse
Well, first of all thanks for ur nice words. Let me just say that I was about to disconnect another device from the hub where the GTAB was attached and flashing at that time, and yea, I accidentally unplugged the GTAB instead of the other device. I may be a moron, thanks, and thankfully not everyone believes themselves as god, which is a good reason to not help other people who are in troubles, even if for stupid things sometimes... If everyone were thinking like u we were probably still at the age of 1400 ...

Mate it wasn't a barb directed at you personally, but you weren't exactly careful were you?
I'm no god... but I've never bricked a device either, and I've been flashing for over five years now. To top it off I've almost never owned a device which could be taken back to the shop (90% of them come from other countries, not my local retailers). Perhaps this has taught me to be careful.
In any case, what I said holds true, and if you ask around I'm certain you find most will agree.

Dude, you have the best avatar! I can't keep my eyes away! Good luck, and don't worry about mistakes - that is one reason this forum exists.

Cannot start my Gtab after trying update JMC
...Hello everybody,
I am really worry about the fact my Gtab doesn't want to switch on after trying to flash it. I tried all process to put it on download mode or recovery but nothing work.
Do you have any idea about it ? Is there a specific procedure to switch on (eg : press power for 1 minutes + blablabla).
My provider doesn't want to take my Gtab in warenty before my contract is activated (the 4th of february).
Thank you for your answer

HELP, I have same problem, please explain how Hemidall can fix it?
Thanks
[email protected]

zyborg said:
Could you please list the steps you went through in order to fix this - for everyone else's sake? Thx!
Click to expand...
Click to collapse
I also had a semi-bricked VZW Tab, with the phone-triangle-computer warning graphic at start up. (I flashed a new boot loader, and failed to read the instructions closely enough. Either the file was incorrect for my device, or the drivers were not loaded correctly, but my tablet was borked.)
Using heimdall 1.3.2 (with the correct drivers, on a 32-bit windows system), I clicked the "close pc screen" option to clear the warning.
I then held the power button until it turned off, then held vol+ and power to re-enter download mode. Once in download mode, I used heimdall 1.1.1 to flash the zImage from SCH-I800-Stock-Rooted-2.3.5. My tablet (still unrooted, and still stock?) booted, but sat at the SAMSUNG logo for ten minutes or more. (It announced its progress, telling me periodically "five minutes remaining", etc.)
Once it finished, my tablet was revived. I will now follow the above advice and read all instructions very carefully, re-writing them in my own words to ensure I understand what I'm doing, before I try this again.

One year old thread......do you guys ever watch posting dates???
Sent from my GT-P1000 using Tapatalk 2

...like REALLY bricked
bumping this old thread in hopes that someone can point me in the right direction...
Got my p7510 (10.1" wifi retail) stuck pretty badly when trying to restore stock ROM coming from Overcome (it came rooted from ebay). From what I gather from the forums, seems like my bootloader is still locked.
whenever I attempt to flash a BOOTLOADER, PIT, or PDA using ODIN it connects, initializes, and gets stuck on "Flashing boot.img"
I think the recovery partition is damaged. When I boot using Power + Volume Down, I can get to the screen where you select recovery mode or download mode but recovery mode will not load. The screen flickers when I select recovery, but goes nowhere. Download mode works.
I tried using nvflash to force the right software onto it but I get error 0x4 (usb write failed).
There has to be a way to restore the stock bootloader and get this thing running again. Tablet will not boot android at this point. I have been searching the forums for about a week now, anyone have any ideas?

Keeps rebooting after Darky 8.1 update

Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.

Zink6 said:
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Click to expand...
Click to collapse
try a re flash of another ROM preferably a stock ROM then start all over again, similar thing happened to me earlier, i am quite new to all this but i dont know if its the kernel or lagfix i had what caused this...
i re flashed back to froyo and then installed darkys ROM then re installed my kernel last.. all is good (for now)

worked for me first time but when i went to sgs tools to upgrade your apps ie gallery, camera, it said no busybox installed but went ahead and done fine in v8.0 and i see that cwm changed from red to green too went to market for busybox to download it but when it goes to install phone just reboots all the time mmmm...

Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.

stepsch said:
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
Click to expand...
Click to collapse
YES !!! i agree, it is a pain.. but we love our phones and we would do anything for them its always best to flash back to standard FW if you ever get a problem...

I myself experienced this. Whenever I installed a new software, it would just boot. I got fed up because darky's forums are also down and there is no discussion. flashed doc's rom. Now everything is fine.

...mh... but it's not caused by Darkys ROM. This cycling boot feature may appear at all ROM, at all lag fix actions and so on. It depends how proper you interact with phone- and ROM-features while configuring. A lil disturbance during your session (by you or battery issue or whatelse) or a not so well prepared basic from where you start and your unlimited-feature-wishlist-and-paint-it-golden-one-click-action is enough to interrupt the whole thing and run into trouble.
It was and is all the same - since DOS or C64. And it will be the same, even when iPhone is on level 12.x or Android will be able to beam you elsewhere thru the barcode scanner.
It's a game. Nothing more. And game means lot of fun - and in the beginning a certain thrill when your phone stuck first time and you are thinking: "... f*ck... bricked..."

yup same for me
cycle boot thing
didnt enable download mode before that....
can get into debug screen thou but wiping it doesnt help
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise

anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
Just tell the warranty guy darky screwed it .
OR
http://forum.xda-developers.com/showthread.php?t=853950
jje

cant even boot the phone mate
so ehm i dont get it....how can odin help me ?
is there any way of getting it into download mode still when it doesnt boot up? i heard about that JIG thing they made themself...isnt that just like the microusb cable that comes with it to the pc? i dont get it sorry if im trippin but im maddd at myself for even trying this lockscreen thing

http://forum.xda-developers.com/showthread.php?t=819551
jje

Thanks guys for all the replies. Now I did try flashing a stock rom but with no results. Was still having the same thing happening to me. If you guys can give me the link to the files you used to solve this problem, that would be great. Also just for your information I have a Bell i9000m unlocked running on fido. And NO its not an sd card failure lol.
As for DarelSteilz85, I did make one of those JIG usb for myself. It easy, just get the micro usb and strip it bare to the point you can see the pins on the usb which usually are connected to the wires and get a resister to connect one pin to another. Now for which pins, I remember it was 4 and 5 that you had to connect through the resistor but double check as I am not sure. Also the resistor has to be a certain level which I forgot so double check that also. Good luck.

http://forum.xda-developers.com/showthread.php?t=853950
What i use for problems .
jje

[Q] Can't boot without Charger/Usb

Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance

First i would liik to charge phone for 24 hours and also check with another battery .
jje

JJEgan said:
First i would liik to charge phone for 24 hours and also check with another battery .
jje
Click to expand...
Click to collapse
The battery don't seem to be defected. Once the phone is booted with a cable connected, it goes without problems. It just will not boot without a charging signal.

Bump - Still actual

Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje

JJEgan said:
Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje
Click to expand...
Click to collapse
That happened to me a while back and I couldn't find a fix for it. Ended up doing the above and it resolved it.

Z3icon said:
Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance
Click to expand...
Click to collapse
i agree wiv the suggetions frnds given.galaxy is hard to brick.i did all sort of unusual things an even uptodate lol.don worri m8 jus flash to older stock and hard reset.check the connectivity pins,to b clean even the battri pins.somtimes its best u format ur eternal xd on pc an format.and giving another hard rest makes things better.i had once formated my int sd on pc and the phone had emptied,then i flashed and things worked fine.personally sticking to stock rom is better if u dont wan troubles,cause every custom rom has som drawback an needs a lil knownledge to tweak it up.check kies if ur on it,i recomend download the recovery driver in it.hope u get some help.cheeeerzzzz

Same here...
Hello everyone,
I too have the same issue as stated in the first post.
I even had issue sometimes that when boot up.
The USB notification icon wouldnt turn off even if i wasn't connected.
Some threads suggested that I clean the USB port, which i did and nothing changed, even if it looked a little bit dirty in there (Hard to say since it is really small).
Now the USB port looks just as new but same issue: I cant power on the unit witout having it connected with a power cord.
Also, when offline in download mode, Odin detect the unit and I can flash my device (Which I did yesterday by flashing UGJH2 re-partition and UGJL2 not re-partition) but when boot up, I can't make it to sync up with the computer. No sync possible (Also now I'm not rooted anymore).
The unit is under warranty but since it is unlocked with a tool that needed rooting to lock back, abviously I would need to be rooted again but to do it, I need to be able to sync it with my PC (No cant do here).
I have some engineer at work that offered me to check it out for me, they think it is related with the USB port, but I'm worried about the warranty seal. I found how to disasemble it but does anybody knows where it could be located on the I9000M from bell (Vibrant)? Does it have one?
Anybody have any better suggestion or a second opinion, please?
Its my 3rd Galaxy S from Bell and Samsung is now the last company I would think when buying a new mobile.
EDIT: Did the Block 2 Method and now it doesnt even want to boot at all (Did the JPY_JPY_JPY.tar part), now it shows the loading sign even faster and the battery doesnt even show it self at all.

Hello again people!
Got my friend engineers to open the phone and they didnt find anything that would cause my issue (Also no warranty label...).
Does anybody knows how to root a Galaxy S with Froyo without a PC?
I want to return my phone to Bell Canada under warranty but my phone is unlocked and I want to lock it back before sending it back and I need to be rooted to do so...
Thanks for your help!

I got the same problem here. Could someone tell me more on this. What is this Block 2 ODIN method?

this problem can be caused by water or sweat that got inside the case of your sgs.
the biggest hole in the case is micro-usb port) i think condensation accumulated there and locked some contacts.
try to disassemble the phone and carefully clean and dry it.
this helped me.

[Q] screen gone black!

hi guys im wondering if any of yous can give me some idea as to what happened to my galaxy note.first of all i will start by saying i am a noob at this?ok so i tried to update my note to ics using odin v1.83.i put in download mode and the box came up yellow and i clicked on pda and then i hit start.now i didnt do a backup because 1 im stupid and too i didnt think i needed to as there wasnt really anything on the fone that i needed or so i tought.anyways everything went fine until it didnt reboot.so i unpluged it and took out the battery and reinserted it.to find that that fone was starting up but with no visual on sccreen or nothing.please tell me im not screwed.iv left it back with vodafone as this is my network.just want to know whats gonna happen really.cheers guys any advice would be great?

fonepimp said:
hi guys im wondering if any of yous can give me some idea as to what happened to my galaxy note.first of all i will start by saying i am a noob at this?ok so i tried to update my note to ics using odin v1.83.i put in download mode and the box came up yellow and i clicked on pda and then i hit start.now i didnt do a backup because 1 im stupid and too i didnt think i needed to as there wasnt really anything on the fone that i needed or so i tought.anyways everything went fine until it didnt reboot.so i unpluged it and took out the battery and reinserted it.to find that that fone was starting up but with no visual on sccreen or nothing.please tell me im not screwed.iv left it back with vodafone as this is my network.just want to know whats gonna happen really.cheers guys any advice would be great?
Click to expand...
Click to collapse
Lets hope you haven't hard bricked it like I did. Are you not able to get anything on the screen at all? Does PC Odin show a cable connection when you connect your phone to your PC via data cable?

Not sure what exactly do you mean by phone starting with no visuals. How do you know it's starting up if you can't see anything ?
Anyway, check if you can enter download mode again - power+home+vol.down. Even without screen, after that press volume up to continue - if it works, Odin should detect your phone. If it does, just flash it again. Probably just a bad/unfinished flash.

Akiainavas said:
Check if you can enter download mode again - power+home+vol.down. If yes, just flash it again. Probably just a bad/unfinished flash.
Click to expand...
Click to collapse
Or you could try a USB JIG if that doesn't work.

Moved To Q&A​
Please post questions in the Q&A section​

Ahem. Read guys. He said he gave it to vodafone for service.
OP just wants a hint at what might be wrong with it.

screen gone black
cheers guys.to answer some of the questions.first it still detects in odin and i have tried or roms or updates.still not working.2.you can hear the start music when i power on.then the screen is just black.