Related
Cant connect to RSDlite with my droid x
Here is the story.
I could really use some help here. I had originally rooted my droid x and then tried moving the bin to xbin to keep root. But being that i am really new to this i did not know you couldn't update to 2.2 if you had anything custom installed. so i SBF flashed my phone to stock.. left root off, then updated. Being dumb i tried using the root program for 2.1 on my 2.2. says its rooted fine.. it didn't.. no big deal i hope. i don't know if this has any affect as to why this issue is happening but i figured its worth mentioning. Anyways... so now i want to downgrade from 2.2 to 2.1 so i can root and move the bin file properly but i cant. Every time i try to connect to my computer in PC mode, it fails to load/install the driver for my X. my computer recognizes that its the MB810 but fails... so i cannot connect properly to RSDlite in order to perform the flash.. i have tried connecting in all modes media sync... charge only.. PC mode.. etc.. and yes USB debugging is enabled.. i have been trying to figure this out for a couple days now and I'm going crazy. Any help would be greatly appreciated.
BTW i am using windows 7 64bit
UPDATE:
I now have the drivers installed and the phone connects properly to my computer, not sure if i am connecting properly to RSDlite but it still will not allow me to flash the sbf. the sbf i am using is the phoxus -the gift- for the life of me i cannot figure out why it will not let me flash. i open RSD..select my sbf.. connect my phone.. and the start button will not light up.
o0gamerbear0o said:
Cant connect to RSDlite with my droid x
Here is the story.
I could really use some help here. I had originally rooted my droid x and then tried moving the bin to xbin to keep root. But being that i am really new to this i did not know you couldn't update to 2.2 if you had anything custom installed. so i SBF flashed my phone to stock.. left root off, then updated. Being dumb i tried using the root program for 2.1 on my 2.2. says its rooted fine.. it didn't.. no big deal i hope. i don't know if this has any affect as to why this issue is happening but i figured its worth mentioning. Anyways... so now i want to downgrade from 2.2 to 2.1 so i can root and move the bin file properly but i cant. Every time i try to connect to my computer in PC mode, it fails to load/install the driver for my X. my computer recognizes that its the MB810 but fails... so i cannot connect properly to RSDlite in order to perform the flash.. i have tried connecting in all modes media sync... charge only.. PC mode.. etc.. and yes USB debugging is enabled.. i have been trying to figure this out for a couple days now and I'm going crazy. Any help would be greatly appreciated.
BTW i am using windows 7 64bit
Click to expand...
Click to collapse
I would delete the drivers and install the Motorola driver that you can get at Motorola. I have 2.2 which is running great but I still had to reinstall the drivers see that my PC could See my DX.
Before you can do anything your PC has to See your DX with no issues.
Hope this helps
I'm on 7/32
o0gamerbear0o said:
Cant connect to RSDlite with my droid x
Here is the story.
I could really use some help here. I had originally rooted my droid x and then tried moving the bin to xbin to keep root. But being that i am really new to this i did not know you couldn't update to 2.2 if you had anything custom installed. so i SBF flashed my phone to stock.. left root off, then updated. Being dumb i tried using the root program for 2.1 on my 2.2. says its rooted fine.. it didn't.. no big deal i hope. i don't know if this has any affect as to why this issue is happening but i figured its worth mentioning. Anyways... so now i want to downgrade from 2.2 to 2.1 so i can root and move the bin file properly but i cant. Every time i try to connect to my computer in PC mode, it fails to load/install the driver for my X. my computer recognizes that its the MB810 but fails... so i cannot connect properly to RSDlite in order to perform the flash.. i have tried connecting in all modes media sync... charge only.. PC mode.. etc.. and yes USB debugging is enabled.. i have been trying to figure this out for a couple days now and I'm going crazy. Any help would be greatly appreciated.
BTW i am using windows 7 64bit
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=760955
Switch the mode of the device when pluggied in and the drviers should load fine. That said change it from PC mode to Windows Sync Mode and you should be good to go.
Follow this to get your computer to recognize your DX running Froyo, you need new drivers.
1. USB Mass Storage without Development Mode on.
2. MotoConnect will prompt; Install.
3. PC Mode with Development Mode on.
4. ADB activate again on leaked Froyo.
Thanks for all the quick replies. I really appreciate it. I will try all of this when I get home. Thanks again. I'll keep you posted.
Sent from my DROIDX using XDA App
I could do everything except "mass storage" on win 7 x64. I finally had to reinstall windows to get it working again. Hope you have better luck.
Sent from my DROIDX using XDA App
ok i have ADB access which i have never used before.. but all the drivers are installed now and i still cant flash the SBF file still using RSDlite.. im so confused.
o0gamerbear0o said:
ok i have ADB access which i have never used before.. but all the drivers are installed now and i still cant flash the SBF file still using RSDlite.. im so confused.
Click to expand...
Click to collapse
which file did u dl, its the full SBF zip file which was almost 300MB.
yea i do have the full sbf. its 235 some megs or something.. i have used it before.. now i reintalled windows and the RSDlite is working and the phone is connecting and i have the option to click the start button but now i am getting this error.
Failed flashing process. Failed flashing process. Phone (0000): Phone is not compatible with multi-interface super-file. (0x703B); phone connected.
any ideas?
o0gamerbear0o said:
yea i do have the full sbf. its 235 some megs or something.. i have used it before.. now i reintalled windows and the RSDlite is working and the phone is connecting and i have the option to click the start button but now i am getting this error.
Failed flashing process. Failed flashing process. Phone (0000): Phone is not compatible with multi-interface super-file. (0x703B); phone connected.
any ideas?
Click to expand...
Click to collapse
no sorry, i just did the downgrade and had no problems.
well as it turns out.. somehow i got it working, but i dont know how.. but i did. so yea. i guess installing a new copy of windows seemed to do the trick. I hope this thead can help others also. GOOD LUCK and thank you all for helping me out.
You can also go to ubuntu and get a copy of linux for free, burn it to disc, then boot into linux from the disc. No install needed. Once in, use SFB_Flash (google it) to flash the SFB file...P3Droid and Birdman both recommed this vs the RSDlite.
Hey there, i am feeling somewhat overwhelmed with all of the advice going on out there and need someone who can give me the answer to my specific problem hardware wise without breaking a sweat...
I flashed a froyo 2.2 rom onto my phone a while ago, recently all of my apps stopped working, and i could no longer install any apps.
Couple days ago i tried openning gmail and the screen went black and gave me the bzzzzzz...............................bzzz...bzzz...
vibrating error that you usually get when an app crashes.
Now the phone continues doing that even when booted up and stuff
It starts right after the S screen and repeats until the battery is removed.
My phone can't get into download or reset mode using the 3 button method so i bought a jig off of ebay, works like a charm.
however NOW, i cannot get the computer to see the phone; both when it is on and attached and in download mode and attached. Odin can't see it, neither can Kies.
If i can get either to see it, i can look up the flashing process to make sure everything is right.... but as of yet nothing i am doing is making a difference.
Thanks for any help
Ok, I'd focus on odin so disable Kies (in task manager processes - all the kies processes).
Then I would 1) reinstall the drivers (standalone ones) 2) Have a few versions of odin to try (like 1.3, 1.7 and ez odin) 3) Clean your usb port on the phone (and computer maybe too - whats the harm?).
Usually if you are sure the drivers are Ok then you should be able to odin working with a nice clean port. They are more sensitive to dirt/moisture or whatever than they should be.
Try that and let us know...
BTW Some people think that the order is important but I've never noticed that. I always have odin open and then connect it but cant hurt to try the other way around too.
Hey thanks alot,
I am at work right now but i am optimistic about trying that out lol.
Just so i know for when the time comes and if Odin works, what files do i need to flash it? .pit, .tar and anything else specific for Bell Canada?
I only ask because you are with Bell so it is probably a very simple answer for you. Otherwise I am sure i can find it elsewhere.
Thanks,
I'll keep you updated
Josh
Download the complete jl2 rom from link I posted yesterday (search my posts) with repartition ticked, then flash the kc1 rom from stock rom link on xda or at samfirmware.com and flash without repartition if you want the latest. You could just try the kc1 step but I you need to repartition.
Sent from my GT-I9000M using XDA Premium App
Hey man,
my phone has never been sent in for repairs or replaced...
I was reading one of your other posts and you advised another member to send it in and maybe they will replace/update hardware?
I have still had my phone for less than a year so sending it in will be no problem at all...
Should i flash to the latest myself or return to stock and send it in?
I really appreciate your help.
Thanks
Well he knows his is broken as he can see that his internal memory reads 0 (which means its cooked - ask me how I know...) and he was trying to fix it in a round about way. Or there was the guy who flashed a captivate rom - that was just a big no-no.
You might just have a corrupt partition or some other corruption in the file system. I seem to get that all the time and its a pain but very fixable .
Alright, sooo
-uninstall Kies
-install drivers only
-try to connect to Odin
-If succesful flash with Odin
-dance with joy
Got it, I will update you later when i get home.
Thanks
installed drivers on my work computer (32 bit windows xp) and nothing... I've tried phone off, phone on, phone in d/l mode... It doesn't pick up anything...
I can try it on my Windows 7 comp at home and see if that works but i'm wondering what the worst case scenario is just bringing into Bell and having them fix it... Am i looking at charges, warranty voiding, etc.. etc... to have it fixed or could i BS my way out of it?
Fuuuuuuuuuuuuuuuuuu
pretty sure i flashed the wrong firmware on my phone, when it boots up it says GT-I9000 not GT-I9000M.
It worked fine for like 6 months so i never questioned it... damn damn damn
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
I9000 firmware is completely compatible. The text you see is from the kernel which are always for i9000 unless you have one of the three bell firmwares. So that's not the issue.
Sent from my GT-I9000M using XDA Premium App
RogueCow27 said:
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
Click to expand...
Click to collapse
I would keep trying. I have gotten warranty before and I was in the same predicament as you almost except I knew that the internal memory was dead. But that was also around the time when most of the I9000M models were dying. They might be checking more now.
If you get odin to flash a stock rom then you can go for it but by then you should be able to fix it.
Sent from my GT-I9000M using XDA Premium App
Alright i will keep trying.
As far as the firmware goes, my gf and i both have the same phone, but she kept heres official and i put custom roms on mine (just the 2.2 because it wasn't available)
We are both on bell canada so i asked her to boot up her phone and the beginning message on hers says GT-I9000M so it freaked me out lol
I will try on my home computer,
keep your fingers crossed for me
Alright, so Odin can now see my phone (it was the damn cord, my Win 7 comp couldnt see it but my xp work laptop can)
Which firmware would you recomend flashing? Stock gingerbread or a slight variation?
I am at work right now so i can wait a bit for a good response. It'd really help me out if you could provide links and tips to the best firmware out right now (i have no problem flashing a custom ROM if it is good).
Thanks alot,
Josh
Succesfully Flashes Gingerbread 2.3.4
Thanks for all your help!!!
how did you manage to see it in odin?
i have te same problem with restarting just after first screen (after flashing to gingerbread) but i cant see it in odin so i cant flash it again?
when i connect it when turned off, a small icon appears with usb connected sound but its still not visible.
Is it maybe my win7?
help, anyone please
Did you start in Download mod? Did you kill the Kies processes in you Win7 task manager ?
If yes, sometimes Windows takes time to install the drivers (be sure ton be connected to the internet), you should also close and relaunch Odin.
i launched download mode with sdk, and now i cant start it.
i went to another pc with xp. it installs drivers but odin cant recognize it.
Well i did it on my work XP computer becuase WIN 7 wasn't recognizing it. But it turns out the whole time the cable i was using would connect to charge, but not act as a pc connection.
hey guys i have a captivate that i tried flashing and was successful then i tried again and the screen went black. im not sure if my battery died during the process or what but idk what to do. I cant get into recovery mode, i can only get into downloading mode but none of the odin's ive downloaded have recognized my device today. they worked fine yesterday. then i tried "hemidall one click" to try and get it back to stock but no luck. also when i try to power on I get the "Cornkernel" loading screen since that was the kernel i had loaded when it was working, but it fills the bar then shuts off. so it seems like im going to be at the mercy of a computer program since i am unable to access anything on the phone, right? I recently upgraded to gingerbread before all of the flashing of the new roms. all i want is to get back to either froyo or gingerbread, i dont really care, heck ill even take 2.1 at this point. if anyone knows whats going on and can help me thatd be great.
Thanks
Remember to use a rear usb hub for destop and run as admin. Heimdall will mess up your odin drivers.
You may also want to check out the captivate connection issues thread.
Also, to clarify further on prbassplayer's point about Heimdall, it will write its drivers over the drivers assigned to the USB port you are plugged into when it detects your phone. So if you have 4 USB ports and you use port 3 for Heimdall, it would look like this:
1 - Odin port
2 - Odin port
3 - Heimdall port
4 - Odin port
All this means is that you'll need to be aware of the port you used with Heimdall, or just reinstall the odin drivers (they'll overwrite the Heimdall setup).
OK so i tried what you mentioned in that thread on the connection issue and unfortunately it didn't work. is there a way i could start fresh? like delete all the drivers from my computer and then try it again, or do u not think that would work? im open to any ideas/suggestions right now because i hate having an extra paperweight and the thought of buying a new phone.
Don't know if this'll help or even why it worked for me but, when I had problems with odin recognizing my phone, I reinstalled/repaired samsung kies and odin would work for at least one flash.
Note: used full odin (not oneclick)
Good luck
hey guys thanks a bunch i finally got it to work. i had to use a different computer like you said. What a great feeling to have a functional phone again..
Thanks Again!!
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
blackjack54 said:
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
Click to expand...
Click to collapse
Kies sucks lol
look at my sig the first "go to" has the One Click Odin file to get you to stock and rooted 2.3 ...should take no more then 5 mins to do it
the link on that page for the 1 click odin doesnt work.
Try looking >>HERE<<. There are more one clicks there than you will ever need (hopefully)
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
blackjack54 said:
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
Click to expand...
Click to collapse
if you have never flashed GB bootloaders, you need to. Just oonce will work from that time forward. After you flash bootloaders, it's best to avoid them. A bad bootloader flash is one of the few things that will turn a Captivate into a paperwight. About which GB to use, I would say KK4. Its the same as the Official KK4 that was released. So to recap, flash bootloaders only once, then use no bootloader packages after that.
Im not sure if I unlocked them or not honestly. I know i had the phone rooted at one point and was running Cerberus rom. is there any way for me to check?
If you don't know, flash them.
ok i apologize in advance if this is a stupid obvious question..i got the odin one click and i was looking at the page u referred to me to and im wondering what the kernel is for? you cant place it in the odin one click obviously so is that just to keep things together or do i actually need it?
The kernel links are just to use if you want to root the stock rom. You have to use full Odin for those. Stick with the one click until you feel more comfortable in flashing AND do a lot research before your next flash.
so i got the KK1 gingerbread working and everything seems to work fine but now my data doesnt work. So I cant get ATT 3g or edge or anything the only internet i recieve is wifi. anyone know why this is? or how to fix it. ive tried a reboot and nothing ive tried changing the settings under network settings.
... and two buttons have different function; back and search.
i am from canada and have an unlocked galaxy s gt -i9000 (sgh-i896). its originally on rogers ut i use fido on it. it was rooted and running fine on froyo. then i think i stupidly upgraded with some wrong files. two buttons don't work and the computer will only recognize it as a memory stick when i have the micro sd in. it goes in to download mode, but the computer doesn't see it, in both oden and kies. i have tried with usb debugging. nada. the reception is horrible. im new to androids and have searched many forms. i keep getting close to the answer but its not for my device.
pda i9000xwjvz
phone i9000xxjvt
csc i9000oxajvt.
i searched around and found that the "i9000xxjvt" is for the uk captivate. seeing as i live in canada and this is a rogers phone i see this as being a possible problem?
i have done a factory data reset. no good. is there any way to update or downgrade so that i can start messing around with my phone again?
i hope you can help
See the Sticky Thread in the General Forum -- "Captivate Connection Issues..."
If that helps, then u can go to the "Stock Rom One Clicks" that is Stickied in the Development Forum and choose a stock to go back to.
Sent by XDA Premium App
The i9000 and the i896 are different phones. You can't simply flash files for the other one and expect them to fully work, unless they are made for that purpose. The i897-i896 is Captivate, i9000 is the Galaxy S.
Make sure you have Odin open first, then plug in. I recommend trying a one click back to stock
Sent from my ICS Samsung Captivate
ive looked at many connection issue pages and no luck.
i've tried the 1 click a few times. im gonna try it again from another computer soon. hopefully that will help.
and im a little confused. on the back of my phone it says i896 and when i boot up it says gt-i9000? so how are they different?
**update
so im trying 1 click from a new computer and no good.
is there a way to reinstall an os from the memory stick?
U have an i896 phone that has a ported i9000 rom flashed on it.
That is all.
U may want to give Heimdall a try. It uses different drivers and so may work where Odin hasn't.
Sent by XDA Premium App
4-2ndtwin said:
U have an i896 phone that has a ported i9000 rom flashed on it.
That is all.
U may want to give Heimdall a try. It uses different drivers and so may work where Odin hasn't.
Sent by XDA Premium App
Click to expand...
Click to collapse
It actually sounds like he has an unported firmware. That's why the buttons don't work right. You also have different bootloaders. Download mode can be achieved by turning phone off (pulling the battery then replacing it is easiest way). Then hold volume down (not volume up and down) and plugging usb in. As for drivers, uninstall the drivers you have. Look in program files for a folder labeled Samsung and delete it. Restart your computer. Reinstall drivers. As said, Heimdall might be a better route to take since it uses a different driver.
bmjerome said:
and im a little confused. on the back of my phone it says i896 and when i boot up it says gt-i9000? so how are they different?
Click to expand...
Click to collapse
You have a Rogers Captivate that has i9000 bootloaders on it. If you didn't flash them, then somebody else did before you bought it. I think you are trying to run unported i9000 ROMs. i9000 roms only work if somebody reorients the kernel and modifies a few parts of the ROM.
Anyway, download mode on i9000 bootloaders (from powered off state) is Vol down + USB. Then... well what do you want to put on it? Stock i896 Gingerbread?
yeah id like stock i896 gingerbread. i have no problem going in to download mode.
ill try heimdall and get back to you guys.
usoimon this
so i tried with hiemdall and tried to find my phone is zadig but no luck.
i can go in to download mode no problem. do i possibly have to get the i9000 driver for my computer. and if yes which one in particular?
http://forum.xda-developers.com/showthread.php?t=1351224
Read through that again. The same driver package should work for i896,i897, i9000.
Try a different cable, and make sure to use the proper usb port.
ive tried all my usb ports, new usb wire, different computers. ive followed may walk troughs. uninstalled and reinstalled a bunch of different driver packs.
phone goes in to download mode no problem every time. but both odin and heimdall don't recognize.
when the phone is powered up it goes in to usb mode and says connected but on the computer the usb doesn't see anything. no pop ups in the tray or anything.
id this a lost cause? am i missing something? im usually pretty good with this kind of stuff...
*update.
ive been reading all over the internet and have found that it may be a hardware issue. maybe happening randomly after i had installed the gingerbread.
is there a way that anyone would know of to update my firmware through wifi blue tooth or micro sd?
FIXXXXED!! woohoo
so i went to my brothers who sold me the phone and it worked immediately. i guess his computer remembered it. i dont know why nothing worked on my 3 computers with all the drivers and stuff that i tried. thank you for all the help.
Before ppl start asking me, this is what happened. I gave my Cappy to my daughter and after months of running Dlev Rom, I decided to upgrade to ICS. She was not happy with the rom and wanted to go back to gingerbread. I tried downgrading via recovery but had issues with the downgrade. Long story short....ignorant me, I used Odin and end it up with eclair.
Now here is where the problem started. The phone was succesfully flashed with eclair but button combo wasnt working at all. So, I rooted first and then with adb, I adb reboot download, then once in download, I flashed ginger bootloaders and thats how i end it up with the infamous phone /!\ comp. soft brick. Since originally i had no button combo working, I cant get into download mode. My comp just wont recognize the Cappy.
I have searched for hours and tried all ways possible to get into DL mode but "nada"! Even with Odin opened or heimdall, batt out, batt in, all combinations of buttons...nada (nothing), no luck. Also tried the program by Adam to unbrick the Cappy (that I've found searching) but still nada! I have windows 7 with java and that program by Adam just wont work on my comp.
Can someone try to help me on what can I do without sending my daughter's Cappy to a shop...lol?
Edit: In this post I explain what got "me" out of the softbrick after 2 days of trying! It might not work for who ever falls in a similar situation and even mayb is not a proper way of doing things, but it worked on my end!!! http://forum.xda-developers.com/showpost.php?p=26305016&postcount=23
You can use that screen as a download mode.
Remove Java. And then go download Java JRE.
Java JRE 32 bit
Java JRE 64 bit
Try going and grabbing the Heimdall KK4 1 click. Or you could try any of the Gingerbread Heimdall packages in the OneClick Master Collection
I think you'll be fine to run Heimdall after the Java reinstall.
Red_81 said:
Try this:
Take out battery
Plug in usb cable
Hold volume+ and volume-
Pop in battery
This should take you straight into download mode. Just have to flash a new ROM/Stock Image
This came from another post about 10 down from yours.
Click to expand...
Click to collapse
Lol....Trust me, I've done that and all ways possible. At least the phone isnt hard bricked. All i need is DL mode and I should be good! Thx sweety!
Baby Liz Sandra said:
Before ppl start asking me, this is what happened. I gave my Cappy to my daughter and after months of running Dlev Rom, I decided to upgrade to ICS. She was not happy with the rom and wanted to go back to gingerbread. I tried downgrading via recovery but had issues with the downgrade. Long story short....ignorant me, I used Odin and end it up with eclair.
Now here is where the problem started. The phone was succesfully flashed with eclair but button combo wasnt working at all. So, I rooted first and then with adb, I adb reboot download, then once in download, I flashed ginger bootloaders and thats how i end it up with the infamous phone /!\ comp. soft brick. Since originally i had no button combo working, I cant get into download mode. My comp just wont recognize the Cappy.
I have searched for hours and tried all ways possible to get into DL mode but "nada"! Even with Odin opened or heimdall, batt out, batt in, all combinations of buttons...nada (nothing), no luck. Also tried the program by Adam to unbrick the Cappy (that I've found searching) but still nada! I have windows 7 with java and that program by Adam just wont work on my comp.
Can someone try to help me on what can I do without sending my daughter's Cappy to a shop...lol?
Click to expand...
Click to collapse
The [Phone /!\ Computer] screen is another method of Download Mode. You should still get Odin to recognize the phone. If Odin recognizes the phone, you should flash KI2 from This thread, since it has CWM injected. Once you have CWM, you have a clean slate to install any ROM you desire.
If Odin does NOT recognize you phone no matter which USB port you connect the phone to (as it happened to me once), you could try what I did. I downloaded Windows installer for Ubuntu Desktop, and that got me Linux. Once I had Linux, flashed KB2 from the ROM thread linked above. Why Linux? Because I never got Heimdall to work on Windows, but I did on Linux. After my phone was completely stock, I followed the instructions on TRusello's Guide to Flashing ANY ROM to get my phone set up the way I wanted.
I'm sure there are faster ways than the one I just gave you, but I can vouch that my method works, and you might get your phone sorted out while you wait for a better response. Good luck!
That will teach me to edit my post without refreshing first!
kafepuya said:
The [Phone /!\ Computer] screen is another method of Download Mode. You should still get Odin to recognize the phone. If Odin recognizes the phone, you should flash KI2 from This thread, since it has CWM injected. Once you have CWM, you have a clean slate to install any ROM you desire.
If Odin does NOT recognize you phone no matter which USB port you connect the phone to (as it happened to me once), you could try what I did. I downloaded Windows installer for Ubuntu Desktop, and that got me Linux. Once I had Linux, flashed KB2 from the ROM thread linked above. Why Linux? Because I never got Heimdall to work on Windows, but I did on Linux. After my phone was completely stock, I followed the instructions on TRusello's Guide to Flashing ANY ROM to get my phone set up the way I wanted.
I'm sure there are faster ways than the one I just gave you, but I can vouch that my method works, and you might get your phone sorted out while you wait for a better response. Good luck!
Click to expand...
Click to collapse
Yeeee....finally someone with a good heart and willing to share knowledge!!! And BTW, yes I tried all usb ports. The difference between your comp and mine is that I can run heimdall but like I said, way i plug the usb, my comp nor heimdall and/or Odin recognize the phone after the brick.
I'm not home at the moment but thank you from the bottom of my heart for your info. I'll get home kind of late tonight but I will follow your info to the tee and keep u post it...if u dont mind!
Thx and a kiss for you sweety!
Sent from my SGS II 4G using XDA Premium App
Heimdall and odin use different drivers, Once you install Heimdal and use your phone on a USB port, that USB port will only work with Heimdall. Odin will no longer work on that USB port, Until you uninstall the heimdall drivers
TRusselo said:
Heimdall and odin use different drivers, Once you install Heimdal and use your phone on a USB port, that USB port will only work with Heimdall. Odin will no longer work on that USB port, Until you uninstall the heimdall drivers
Click to expand...
Click to collapse
Short and sweet...i installed ubuntu last night on my pc and I thought i lost windows. Did some search and I can choose when my pc start up either W7 or ubuntu. Went to bed at 4am trying to install java to ubuntu with no luck. To b honest, i'm about to quit trying to get this phone in DL mode. My daughter hates me and my husband told me, u messed it up...u fix it! Agh!!!!! I'm trying again but if I cant get it to work I rather just buy my kid a new phone....and thats a shame because that Cappy has been a warrior!
Any other method to get DL mode??? PLEASE...SOMEONE????
Once you're at that screen, it is download mode. You could try a jig. You can build one or buy one.
Did you reinstall java on Windows 7 and then try Heimdall?
Red_81 said:
Once you're at that screen, it is download mode. You could try a jig. You can build one or buy one.
Did you reinstall java on Windows 7 and then try Heimdall?
Click to expand...
Click to collapse
Yes I did and pc still not recognize device. Tried all ports and different usb cable...still no go!
Did device manager not recognize it or Odin/Heimdall not recognize it? I know my system wouldn't show it was connected but Odin/Heimdall still would.
Red_81 said:
Did device manager not recognize it or Odin/Heimdall not recognize it? I know my system wouldn't show it was connected but Odin/Heimdall still would.
Click to expand...
Click to collapse
Neither one recognize the device. With Odin you're supposse to see the yellow light meaning its connected...but nothing, and with heimdall clearly says disconected. I am sooo exausted looking for an answer as to what to do to get this phone on DL mode! I've used both programs in the past but the phone just dont want to come alive!
I understand how frustrating it can be to get a phone to respond.
I went back to your first post to make sure I didn't miss anything and I realized what the issue might be. Since the phone was upgraded to ICS it wouldn't be using the standard captivate drivers any more.
Let's try this:
Download and install the Android SDK
Add the Google USB Driver
Try ODIN/Heimdall again.
I think I had a similar issue when I was reverting a phone from CM7 back to Stock captivate.
Red_81 said:
I understand how frustrating it can be to get a phone to respond.
I went back to your first post to make sure I didn't miss anything and I realized what the issue might be. Since the phone was upgraded to ICS it wouldn't be using the standard captivate drivers any more.
Let's try this:
Download and install the Android SDK
Add the Google USB Driver
Try ODIN/Heimdall again.
I think I had a similar issue when I was reverting a phone from CM7 back to Stock captivate.
Click to expand...
Click to collapse
Oookkkk...will give this a try! Thank you.
Baby Liz Sandra said:
Oookkkk...will give this a try! Thank you.
Click to expand...
Click to collapse
I think it will work. Sorry it took so long for me to realize it. I actually had to do the same procedure within the last week but less sleep + work + cold is making me a little foggy.
Red_81 said:
I think it will work. Sorry it took so long for me to realize it. I actually had to do the same procedure within the last week but less sleep + work + cold is making me a little foggy.
Click to expand...
Click to collapse
Just finished installing both...restarting pc now and will report back. Thank you yet again!
Baby Liz Sandra said:
Just finished installing both...restarting pc now and will report back. Thank you yet again!
Click to expand...
Click to collapse
Ok...thats it! That did not work either. I connected my SGS II just to see if my pc would recognize the phone, and indeed my pc picked up the device as well as my husband's Sensation. So thats it! Just called Radio Shack for a jig and the guy never heard of that...lmao! You guys should see my daughter's look at me....awh!
Anyway...I'm subscribed to this thread so if anyone has another bright idea I'll give it a shot. Thanks again!
Sorry that didn't work either. Here's another thread about connection issues to the computer. I hope this helps
http://forum.xda-developers.com/showthread.php?t=1351224
Red_81 said:
Sorry that didn't work either. Here's another thread about connection issues to the computer. I hope this helps
http://forum.xda-developers.com/showthread.php?t=1351224
Click to expand...
Click to collapse
Well...thank you! Don't know if i should keep DLing stuff to my pc. Now I have ubuntu, sdk manager, hemidall, dont know how many odins, etc. My husband just ask me for a new pc because he tried to uninstall ubuntu and he was unsuccesfull at it. Now this softbrick is gonna cause me some major issues family wise. This really sucks! But hey, me been a female, I just learned that nothing is impossible for us. If my hubbie dont wanna help me...I'll get it done one way or another. I will see my daughter smile....believe that!!!!!
Thank you!
I have a 2.5 year old daughter and would do anything to see her smile.
Here is a guy here on XDA who makes the jigs. However, I still believe you just have a driver issue. At this point I can only say to take off all the drivers, odin, and heimdall and start fresh.
http://forum.xda-developers.com/member.php?u=500006
I used his kindle fire cable and it was great.