... and two buttons have different function; back and search.
i am from canada and have an unlocked galaxy s gt -i9000 (sgh-i896). its originally on rogers ut i use fido on it. it was rooted and running fine on froyo. then i think i stupidly upgraded with some wrong files. two buttons don't work and the computer will only recognize it as a memory stick when i have the micro sd in. it goes in to download mode, but the computer doesn't see it, in both oden and kies. i have tried with usb debugging. nada. the reception is horrible. im new to androids and have searched many forms. i keep getting close to the answer but its not for my device.
pda i9000xwjvz
phone i9000xxjvt
csc i9000oxajvt.
i searched around and found that the "i9000xxjvt" is for the uk captivate. seeing as i live in canada and this is a rogers phone i see this as being a possible problem?
i have done a factory data reset. no good. is there any way to update or downgrade so that i can start messing around with my phone again?
i hope you can help
See the Sticky Thread in the General Forum -- "Captivate Connection Issues..."
If that helps, then u can go to the "Stock Rom One Clicks" that is Stickied in the Development Forum and choose a stock to go back to.
Sent by XDA Premium App
The i9000 and the i896 are different phones. You can't simply flash files for the other one and expect them to fully work, unless they are made for that purpose. The i897-i896 is Captivate, i9000 is the Galaxy S.
Make sure you have Odin open first, then plug in. I recommend trying a one click back to stock
Sent from my ICS Samsung Captivate
ive looked at many connection issue pages and no luck.
i've tried the 1 click a few times. im gonna try it again from another computer soon. hopefully that will help.
and im a little confused. on the back of my phone it says i896 and when i boot up it says gt-i9000? so how are they different?
**update
so im trying 1 click from a new computer and no good.
is there a way to reinstall an os from the memory stick?
U have an i896 phone that has a ported i9000 rom flashed on it.
That is all.
U may want to give Heimdall a try. It uses different drivers and so may work where Odin hasn't.
Sent by XDA Premium App
4-2ndtwin said:
U have an i896 phone that has a ported i9000 rom flashed on it.
That is all.
U may want to give Heimdall a try. It uses different drivers and so may work where Odin hasn't.
Sent by XDA Premium App
Click to expand...
Click to collapse
It actually sounds like he has an unported firmware. That's why the buttons don't work right. You also have different bootloaders. Download mode can be achieved by turning phone off (pulling the battery then replacing it is easiest way). Then hold volume down (not volume up and down) and plugging usb in. As for drivers, uninstall the drivers you have. Look in program files for a folder labeled Samsung and delete it. Restart your computer. Reinstall drivers. As said, Heimdall might be a better route to take since it uses a different driver.
bmjerome said:
and im a little confused. on the back of my phone it says i896 and when i boot up it says gt-i9000? so how are they different?
Click to expand...
Click to collapse
You have a Rogers Captivate that has i9000 bootloaders on it. If you didn't flash them, then somebody else did before you bought it. I think you are trying to run unported i9000 ROMs. i9000 roms only work if somebody reorients the kernel and modifies a few parts of the ROM.
Anyway, download mode on i9000 bootloaders (from powered off state) is Vol down + USB. Then... well what do you want to put on it? Stock i896 Gingerbread?
yeah id like stock i896 gingerbread. i have no problem going in to download mode.
ill try heimdall and get back to you guys.
usoimon this
so i tried with hiemdall and tried to find my phone is zadig but no luck.
i can go in to download mode no problem. do i possibly have to get the i9000 driver for my computer. and if yes which one in particular?
http://forum.xda-developers.com/showthread.php?t=1351224
Read through that again. The same driver package should work for i896,i897, i9000.
Try a different cable, and make sure to use the proper usb port.
ive tried all my usb ports, new usb wire, different computers. ive followed may walk troughs. uninstalled and reinstalled a bunch of different driver packs.
phone goes in to download mode no problem every time. but both odin and heimdall don't recognize.
when the phone is powered up it goes in to usb mode and says connected but on the computer the usb doesn't see anything. no pop ups in the tray or anything.
id this a lost cause? am i missing something? im usually pretty good with this kind of stuff...
*update.
ive been reading all over the internet and have found that it may be a hardware issue. maybe happening randomly after i had installed the gingerbread.
is there a way that anyone would know of to update my firmware through wifi blue tooth or micro sd?
FIXXXXED!! woohoo
so i went to my brothers who sold me the phone and it worked immediately. i guess his computer remembered it. i dont know why nothing worked on my 3 computers with all the drivers and stuff that i tried. thank you for all the help.
Related
I have a samsung i9000 with stock JF3 and had rooted and lag fixed it but was having problems downloading apps, paid at first then all downloads begun to fail.. Anyway I tried to use ODIN3 to re-flash the original firmware but to no avail!! I took the battery sim card and sd card out put the phone in download mode, Then started odin3 and connected the phone. Odin3 can see the port but just stays on analysing files... Have then disconnected and tried over and over and over... so many times I don't care to remember. It never gets passed the analysing files. It did fail twice, but that was something to do with samsung kies stealing the COM port (I think!!). Anyway thought I would try and update the firmware through samsung kies. But just get the unable to upgrade this firmware. Which I'm surprised at as most seem to have the option think its to do with my firmwares but not sure.
If anyone could shed light on this also it would be much appreciated!!
Code XXJF3, Modem XXJF3, CSC XENJF3
Anyway to the point of this topic. I Now want to just flash the new Firmware myself but am wondering, If I could not connect odin3 to re-flash the original firmware... Am I going to have problems re-flashing with downloaded firmware! Am thinking there's a great chance of bricking my phone. Doing it all in the correct order so dont understand why it wont connect!!!
Also is there another way/program I could use to flash my device???
You could try using Samsung Kies to install the JM1 official firmware
lokhor said:
You could try using Samsung Kies to install the JM1 official firmware
Click to expand...
Click to collapse
I did... I also wrote that in the thread!! Where I said it cannot be upgraded through kies!
Disconnect all usb devices except mouse and kb and try again. Best to use windows xp. A powered usb Hub helped me too. I think sgs drains too much power from usb ports
Sent from my GT-I9000 using Tapatalk
ickyboo said:
Disconnect all usb devices except mouse and kb and try again. Best to use windows xp. A powered usb Hub helped me too. I think sgs drains too much power from usb ports
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Thanks I shall try that!, got lots of USB's plugged in... I am on xp... If this does not work though, is there an alternative to ODIN3??? or am I stuck on stock JF3... As that would be unbearable.. no samsung update and cant do it myself!!!! I have noticed a few of the senior members do live in Holland, so I shall put it out there that if one of you nice dutch fella's who know's what your doing wouldn't mind having a look at my sgs for me I would be very much greatfull! Holland isn't the biggest of places so I would be willing to travel.... Thats how much I wanna get this sorted!!
Subject Solved
Well I have found the answer!!... Well for me anyway!
I was following the information everywhere as to how to put my SGS into downoad mode!: Volume up + home + Power button... I was assuming this was correct as it was loading up with an android menu with the following options: Restart phone, Update via update.zip, restore to factory settings. I thought while in this I was in download mode. No I wasn't!! LOL... God knows how many times I was trying to connect odin3 and to no avail. I have now found out if i press volume down + home + power button... walaaaa A big green android man doing what appeared to be some digging (Didn't stay on screen long) also with DOWNLOADING in huge green letters... I am now assuming this maybe download mode and I will have better joy attaching my SGS to odin now... If I am wrong someone may slap me in the face with a giant swordfish and leave me for the rats!
Well to start out I have googled the drivers but still doesn't work... after bricking it pretty bad this happen and I fixed it by drivers while bricked to flash it to stock. But it has happened to me again after odin. Is it possible to just break it. Can someone link me working drivers maybe I've been trying ones that don't work or something
Sent from my SAMSUNG-SGH-I897 using XDA App
donk232 said:
Well to start out I have googled the drivers but still doesn't work... after bricking it pretty bad this happen and I fixed it by drivers while bricked to flash it to stock. But it has happened to me again after odin. Is it possible to just break it. Can someone link me working drivers maybe I've been trying ones that don't work or something
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
It's not recognized when the phone is on? Seeing as you posted this topic using your phone I assume so lol. Have you tried restarting your computer?
You can download the correct drivers here.
http://forum.xda-developers.com/showthread.php?t=731989
Make sure you are using the oem usb cable. I had the same problem, changed cables and it worked
some cheap cables are for charging ... bt headsets and other stuff the data cables dont connect, its just for power.
koreancanuck said:
It's not recognized when the phone is on? Seeing as you posted this topic using your phone I assume so lol. Have you tried restarting your computer?
You can download the correct drivers here.
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
deleted drivers restarted, installed drivers restarted and still not working. i am using the cord that came with the phone.
donks232 said:
deleted drivers restarted, installed drivers restarted and still not working. i am using the cord that came with the phone.
Click to expand...
Click to collapse
You gotta make sure that your usb port is directly connected to your motherboard (usually back of your computer).
same usb port that has always worked. ive tried them all by now anyway
now i cant tell you how this helped but... i downloaded drivers to a different computer odin crashed while flashing reflashed and im 100% stock atm. Didnt do ANYTHING to my computer plugged it in and its working.
donks232 said:
now i cant tell you how this helped but... i downloaded drivers to a different computer odin crashed while flashing reflashed and im 100% stock atm. Didnt do ANYTHING to my computer plugged it in and its working.
Click to expand...
Click to collapse
lolol
Duno what happened but I'm glad it worked out for you
I'm having the same problem with my captivate after flashing REDROM. It won't recognize it if I have USB debugging turned on...
i have a theory... were you on a GB or other i9000 based rom/kernel???
well, im still having a problem getting my computer to recognize the phone, i have to mess with it for a a while to get it to work. i really want to flash anew 2.3.3 rom but without being able to get everything working right im stuck in 2.1
is this a problem with my cord or the connection on my phone? or something weird with my phone after flashing it a lot. its currently back to odin stock, i have been trying to master clear it with no luck
TRusselo said:
i have a theory... were you on a GB or other i9000 based rom/kernel???
Click to expand...
Click to collapse
continiuum miui and cyanogen mod are the only things ive tried to flash
well it looks like i'm done. my phone will not show up on my computer and its currently bricked, although i have no issue getting it to download mode i cant do anything with it. unless someone knows some magic, looks like im downgrading to my gf's 4 year old busted up BB
Guys, this problem while connecting to the PC body is stupidly charging .... Even in the download mode Odin does not see a body that could be? Connect other Cappy-all OK.
donks232 said:
well it looks like i'm done. my phone will not show up on my computer and its currently bricked, although i have no issue getting it to download mode i cant do anything with it. unless someone knows some magic, looks like im downgrading to my gf's 4 year old busted up BB
Click to expand...
Click to collapse
it must be a powered usb hub, on my buddies laptop only 1 out of 4 usb ports saw his phone.
if you can get into download mode you arent bricked.
try installing i9000 drivers, or try another computer.
I came up with this a while back. Could very well be the same issue.
Let me start by saying I'm flash happy, and everyone that knows me personally, tells me to just quit jacking with my phone. NOT A CHANCE! I'm on my 3rd Cappy and shouldn't have ever exchange it again. I only had to in the beginning, because I was a newbie and had not know enough, but to get me in trouble.
I presume that this should work on all Windows OS's. I personally am running Vista Enterprise x86.
My symptoms:
Plug in phone to the usb and it there was about a 15% chance off being able to mount to usb, and Windows recognizing as a mass storage device. I tried un-installing drivers and re-installing and it would work some of the time, until the point came when parts of the driver install would fail. Then to the point when it was just completely unrecognizable. I thought I had it fixed because it seemed intermittent. In the middle of flashing to stock, something interrupted communication between the pc and my phone. Restarted the phone and attempted the flash again. Got a little farther and froze again. I had to use another pc that I had never connected my phone to before and I was able to use my jig to trigger download mode, because no buttons combinations would allow it into download mode.
This got me thinking that it was specific to my pc and not my cable or my phone.
My resolution:
I went straight to the registry and went to find. I deleted every entry that came up for "i897" and "i9000" excluding what was listed in the system volume information, as I didn't have permissions to remove any keys. I didn't keep count, but I probably deleted 300-400 registry keys that pointed to my phone. It seems as if with each developers rom that I had flashed, there was an entry for a different device. Don't quote me on that, because it is just my personal consensus. I also un-installed the samsung drivers, the unknown device driver, kies software, and anything associated with samsung. I noticed that next to all of the i9000 instances, the hex key for me started with 1000ee. So I also searched for the first part of that key trying to ensure that all instances of the device. Lastly, I deleted the samsung folder from program files.
I installed the samsung drivers package commonly listed in all of the other threads for x86 operating systems. I plugged in my phone and watched as each and every driver installed successfully. Keep in mind different drivers are installed depending on if you have usb debugging on/off, and the options for if the preferences on you phone are set to media, storage, or kies. I have multiple usb ports, however testing has shown me that, for me and my setup, I can plug into the port that I used when installing the drivers the final time, I am able to connect consistently. Earlier today, I tried to plug into a different usb port and it was an unknown device. I am led to believe, this is because I didn't un-install the unknown device on this particular port.
If you intend to work in the registry, please remember to always back it up first. You can always restore.
Hopefully my findings can help you as they did me. Happy flashing and I would like to thank the community for the dedication to assisting each other and the developers, for making flashing, better than crack cocaine. Flashing rom's doesn't make you twitch near as much as a crackhead.
Well since you can't use your phone you should sell it to me
Sent from my GT-I9000 using XDA Premium App
I didn't even install drivers, ubuntu got them for me
Sent from my SGH-I897 using XDA Premium App
Hey there, i am feeling somewhat overwhelmed with all of the advice going on out there and need someone who can give me the answer to my specific problem hardware wise without breaking a sweat...
I flashed a froyo 2.2 rom onto my phone a while ago, recently all of my apps stopped working, and i could no longer install any apps.
Couple days ago i tried openning gmail and the screen went black and gave me the bzzzzzz...............................bzzz...bzzz...
vibrating error that you usually get when an app crashes.
Now the phone continues doing that even when booted up and stuff
It starts right after the S screen and repeats until the battery is removed.
My phone can't get into download or reset mode using the 3 button method so i bought a jig off of ebay, works like a charm.
however NOW, i cannot get the computer to see the phone; both when it is on and attached and in download mode and attached. Odin can't see it, neither can Kies.
If i can get either to see it, i can look up the flashing process to make sure everything is right.... but as of yet nothing i am doing is making a difference.
Thanks for any help
Ok, I'd focus on odin so disable Kies (in task manager processes - all the kies processes).
Then I would 1) reinstall the drivers (standalone ones) 2) Have a few versions of odin to try (like 1.3, 1.7 and ez odin) 3) Clean your usb port on the phone (and computer maybe too - whats the harm?).
Usually if you are sure the drivers are Ok then you should be able to odin working with a nice clean port. They are more sensitive to dirt/moisture or whatever than they should be.
Try that and let us know...
BTW Some people think that the order is important but I've never noticed that. I always have odin open and then connect it but cant hurt to try the other way around too.
Hey thanks alot,
I am at work right now but i am optimistic about trying that out lol.
Just so i know for when the time comes and if Odin works, what files do i need to flash it? .pit, .tar and anything else specific for Bell Canada?
I only ask because you are with Bell so it is probably a very simple answer for you. Otherwise I am sure i can find it elsewhere.
Thanks,
I'll keep you updated
Josh
Download the complete jl2 rom from link I posted yesterday (search my posts) with repartition ticked, then flash the kc1 rom from stock rom link on xda or at samfirmware.com and flash without repartition if you want the latest. You could just try the kc1 step but I you need to repartition.
Sent from my GT-I9000M using XDA Premium App
Hey man,
my phone has never been sent in for repairs or replaced...
I was reading one of your other posts and you advised another member to send it in and maybe they will replace/update hardware?
I have still had my phone for less than a year so sending it in will be no problem at all...
Should i flash to the latest myself or return to stock and send it in?
I really appreciate your help.
Thanks
Well he knows his is broken as he can see that his internal memory reads 0 (which means its cooked - ask me how I know...) and he was trying to fix it in a round about way. Or there was the guy who flashed a captivate rom - that was just a big no-no.
You might just have a corrupt partition or some other corruption in the file system. I seem to get that all the time and its a pain but very fixable .
Alright, sooo
-uninstall Kies
-install drivers only
-try to connect to Odin
-If succesful flash with Odin
-dance with joy
Got it, I will update you later when i get home.
Thanks
installed drivers on my work computer (32 bit windows xp) and nothing... I've tried phone off, phone on, phone in d/l mode... It doesn't pick up anything...
I can try it on my Windows 7 comp at home and see if that works but i'm wondering what the worst case scenario is just bringing into Bell and having them fix it... Am i looking at charges, warranty voiding, etc.. etc... to have it fixed or could i BS my way out of it?
Fuuuuuuuuuuuuuuuuuu
pretty sure i flashed the wrong firmware on my phone, when it boots up it says GT-I9000 not GT-I9000M.
It worked fine for like 6 months so i never questioned it... damn damn damn
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
I9000 firmware is completely compatible. The text you see is from the kernel which are always for i9000 unless you have one of the three bell firmwares. So that's not the issue.
Sent from my GT-I9000M using XDA Premium App
RogueCow27 said:
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
Click to expand...
Click to collapse
I would keep trying. I have gotten warranty before and I was in the same predicament as you almost except I knew that the internal memory was dead. But that was also around the time when most of the I9000M models were dying. They might be checking more now.
If you get odin to flash a stock rom then you can go for it but by then you should be able to fix it.
Sent from my GT-I9000M using XDA Premium App
Alright i will keep trying.
As far as the firmware goes, my gf and i both have the same phone, but she kept heres official and i put custom roms on mine (just the 2.2 because it wasn't available)
We are both on bell canada so i asked her to boot up her phone and the beginning message on hers says GT-I9000M so it freaked me out lol
I will try on my home computer,
keep your fingers crossed for me
Alright, so Odin can now see my phone (it was the damn cord, my Win 7 comp couldnt see it but my xp work laptop can)
Which firmware would you recomend flashing? Stock gingerbread or a slight variation?
I am at work right now so i can wait a bit for a good response. It'd really help me out if you could provide links and tips to the best firmware out right now (i have no problem flashing a custom ROM if it is good).
Thanks alot,
Josh
Succesfully Flashes Gingerbread 2.3.4
Thanks for all your help!!!
how did you manage to see it in odin?
i have te same problem with restarting just after first screen (after flashing to gingerbread) but i cant see it in odin so i cant flash it again?
when i connect it when turned off, a small icon appears with usb connected sound but its still not visible.
Is it maybe my win7?
help, anyone please
Did you start in Download mod? Did you kill the Kies processes in you Win7 task manager ?
If yes, sometimes Windows takes time to install the drivers (be sure ton be connected to the internet), you should also close and relaunch Odin.
i launched download mode with sdk, and now i cant start it.
i went to another pc with xp. it installs drivers but odin cant recognize it.
Well i did it on my work XP computer becuase WIN 7 wasn't recognizing it. But it turns out the whole time the cable i was using would connect to charge, but not act as a pc connection.
Ok I have a stock KB2 Cappy. I used Odin to flash back to 2.1 KB1 JF6
Then I used Odin 3 to flash a kernel so I can put on CM7. I am now stuck in the Boot screen.
I have no 3 button, I cannot get into download mode (my jig is homemade should i order one?)
I tried to change usb and remove the sim card to try odin again to get back into stock.
Nothing seems to work the only thing is my jig is not good either for DL Mode. I want to get back to stock so any suggestions. I tried heimandall did not work either.
I am really stuck on this galaxy s I897 screen.
Is the jig soldered? If its not make sure you are connecting the correct pins and use some black tape or something to isolate your fingers from the resistors (might screw up the actual ohms making it to boot up normally and not in to dl mode.
The bootloop was expected, you are supposed to check that you have a working button combo both before you flash the kernel (because it will bootloop and you boot into recovery and flash whatever) and before you ever flash cm7 because that is the only way to get into download mode besides a jig on aosp roms.
so, fiddle around with your jig some more and if you get it in download mode just flash the captivate gingerbread bootloaders, that will fix your button combo and allow you to proceed flashing cm7.
Hi Guys,
I have a similar problem. I am a total noob-I've had my I896 cappy (Canadian Rogers based) for about a year now; i fiddled with it on Saturday and also got the bootloop. I freaked out, and managed to further flash (out of frustration and confusion) the cappy with another wrong ROM, the I900. I managed to get it back into DL mode and tried flashing stock eclair or 2.2 froyo via ODIN. For some reason, whenever I start the flash (press start on Odin with the froyo 2.2 file on PDA), the progress fails at the factory section. I don't know much about jigs yet, but any tips would be greatly appreciated.
thanks
Chord in the back of the PC directly attached to the motherboard NO EXTERNAL HUBS, right click on Odin run as admin.
Once you have it working READ AND UNDERSTAND WHAT YOU'RE DOING, BEFORE DOING ANYTHING ELSE TO YOUR PHONE
This is probably the easiest guide on how to make one. Layman Jig First one I did I butchered a pare car charger to make it. You can just grab one from MobileTechVideos.com for about $8.
AlphaJ1 said:
Hi Guys,
I have a similar problem. I am a total noob-I've had my I896 cappy (Canadian Rogers based) for about a year now; i fiddled with it on Saturday and also got the bootloop. I freaked out, and managed to further flash (out of frustration and confusion) the cappy with another wrong ROM, the I900. I managed to get it back into DL mode and tried flashing stock eclair or 2.2 froyo via ODIN. For some reason, whenever I start the flash (press start on Odin with the froyo 2.2 file on PDA), the progress fails at the factory section. I don't know much about jigs yet, but any tips would be greatly appreciated.
thanks
Click to expand...
Click to collapse
Hi guys,
Thanks for the link.
From what I understand, a jig is an improvised connection that allows your phone to go into DL mode. What if my phone is still capable of going into DL mode? My apologies, as I am at work.
Im not sure what you mean with your question. What the jig does is give the signal for it to go to download mode as was intended by samsung. Same theory on how your phone knows its connected to your computer, or the wall or the car charger. Its by manipulating the current between 2 pins. Keep in mind your phone should always be capable of going in to download mode assuming the hardware is working and your bootloaders are in working order.
I believe I read it on a different website that as long as your phone can go into download mode, then it is only "soft-bricked," meaning it can still be recovered using ODIN. I don't know If I was misinformed or not. I guess my question is, since my phone is still able to go into download mode, but the flash is still failing, did I DL the wrong ROM, or was the copy of Froyo 2.2 I DL'd corrupt? If so, is there a reliable source/site where I can download Froyo or Eclair?
I hope that makes more sense.
Read my post after yours...
studacris said:
Chord in the back of the PC directly attached to the motherboard NO EXTERNAL HUBS, right click on Odin run as admin.
Once you have it working READ AND UNDERSTAND WHAT YOU'RE DOING, BEFORE DOING ANYTHING ELSE TO YOUR PHONE
Click to expand...
Click to collapse
^What he said. If that fails could be a faulty cable.
AlphaJ1 said:
I believe I read it on a different website that as long as your phone can go into download mode, then it is only "soft-bricked," meaning it can still be recovered using ODIN. I don't know If I was misinformed or not. I guess my question is, since my phone is still able to go into download mode, but the flash is still failing, did I DL the wrong ROM, or was the copy of Froyo 2.2 I DL'd corrupt? If so, is there a reliable source/site where I can download Froyo or Eclair?
I hope that makes more sense.
Click to expand...
Click to collapse
You are correct, if you can get into download mode you are not bricked. Make sure you are using the usb cord that came with your phone, plugged directly into the back of your computer. Make sure your SIM card is out, you're logged in as an administrator, and that you start odin before you plug your phone in.
If it still doesn't work, try another computer and/or another cord.
Why do people say take sim out? Ive never taken it out and had no issues. Just curious.
That is a practice from way back in the winmo days, sometimes the flash would corrupt the Sim itself. Not the case anymore for the most part. I'm with you never take mine out either.
Thanks guys, I will try this at home; hopefully it works.
prbassplayer said:
Why do people say take sim out? Ive never taken it out and had no issues. Just curious.
Click to expand...
Click to collapse
I say it because, while I've never had it screw up the SIM itself, I had a situation where I forgot to remove it and then couldn't get odin to complete a flash on several attempts, resulting in a soft brick that I couldn't flash out of. As soon as I removed the sim, Odin flashed without an issue.
Coincidence? Maybe, although I didn't change anything else. If it possibly keeps me from repeating this terrifying event, though, I'll just keep doing it
apbthe3 said:
I say it because, while I've never had it screw up the SIM itself, I had a situation where I forgot to remove it and then couldn't get odin to complete a flash on several attempts, resulting in a soft brick that I couldn't flash out of. As soon as I removed the sim, Odin flashed without an issue.
Coincidence? Maybe, although I didn't change anything else. If it possibly keeps me from repeating this terrifying event, though, I'll just keep doing it
Click to expand...
Click to collapse
Did you get a red "FAIL" message on ODIN? Because thats what I got several times. My buddy also tried and he got the same thing. The green progress bar completes up till about 80 percent and gives up on me. I'll try taking out the SD and SIM cards when I get home, hopefully it works.
Hi guys, little update:
I found this on the forums and used it:
http://forum.xda-developers.com/showthread.php?t=731989
Anyways, this worked after my second try. Interestingly enough, it worked once i removed the Sim card, which is what apbthe3 suggested..great! I'm just glad my phone is no longer bricked. Minor issue though, my phone is now an AT&T phone, but unfortunately, I am a Canadian Samsung user. New problem now. My phone is no longer rooted (never was actually, but was bricked in the process), I'm happy it works, but i need to know if there are any Canadians out there that know how to revert my device back to Rogers.
Any help would be great. Anyways, the link I provided works great, so its a great resource for our American friends.
Why don't you look at Cognition 4.x.x? Froyo stock ish looking rom tweaked out the ass very fast. Good rom.
Look in development. There are a couple of threads there just for Rogers users.
hey guys i have a captivate that i tried flashing and was successful then i tried again and the screen went black. im not sure if my battery died during the process or what but idk what to do. I cant get into recovery mode, i can only get into downloading mode but none of the odin's ive downloaded have recognized my device today. they worked fine yesterday. then i tried "hemidall one click" to try and get it back to stock but no luck. also when i try to power on I get the "Cornkernel" loading screen since that was the kernel i had loaded when it was working, but it fills the bar then shuts off. so it seems like im going to be at the mercy of a computer program since i am unable to access anything on the phone, right? I recently upgraded to gingerbread before all of the flashing of the new roms. all i want is to get back to either froyo or gingerbread, i dont really care, heck ill even take 2.1 at this point. if anyone knows whats going on and can help me thatd be great.
Thanks
Remember to use a rear usb hub for destop and run as admin. Heimdall will mess up your odin drivers.
You may also want to check out the captivate connection issues thread.
Also, to clarify further on prbassplayer's point about Heimdall, it will write its drivers over the drivers assigned to the USB port you are plugged into when it detects your phone. So if you have 4 USB ports and you use port 3 for Heimdall, it would look like this:
1 - Odin port
2 - Odin port
3 - Heimdall port
4 - Odin port
All this means is that you'll need to be aware of the port you used with Heimdall, or just reinstall the odin drivers (they'll overwrite the Heimdall setup).
OK so i tried what you mentioned in that thread on the connection issue and unfortunately it didn't work. is there a way i could start fresh? like delete all the drivers from my computer and then try it again, or do u not think that would work? im open to any ideas/suggestions right now because i hate having an extra paperweight and the thought of buying a new phone.
Don't know if this'll help or even why it worked for me but, when I had problems with odin recognizing my phone, I reinstalled/repaired samsung kies and odin would work for at least one flash.
Note: used full odin (not oneclick)
Good luck
hey guys thanks a bunch i finally got it to work. i had to use a different computer like you said. What a great feeling to have a functional phone again..
Thanks Again!!
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
blackjack54 said:
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
Click to expand...
Click to collapse
Kies sucks lol
look at my sig the first "go to" has the One Click Odin file to get you to stock and rooted 2.3 ...should take no more then 5 mins to do it
the link on that page for the 1 click odin doesnt work.
Try looking >>HERE<<. There are more one clicks there than you will ever need (hopefully)
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
blackjack54 said:
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
Click to expand...
Click to collapse
if you have never flashed GB bootloaders, you need to. Just oonce will work from that time forward. After you flash bootloaders, it's best to avoid them. A bad bootloader flash is one of the few things that will turn a Captivate into a paperwight. About which GB to use, I would say KK4. Its the same as the Official KK4 that was released. So to recap, flash bootloaders only once, then use no bootloader packages after that.
Im not sure if I unlocked them or not honestly. I know i had the phone rooted at one point and was running Cerberus rom. is there any way for me to check?
If you don't know, flash them.
ok i apologize in advance if this is a stupid obvious question..i got the odin one click and i was looking at the page u referred to me to and im wondering what the kernel is for? you cant place it in the odin one click obviously so is that just to keep things together or do i actually need it?
The kernel links are just to use if you want to root the stock rom. You have to use full Odin for those. Stick with the one click until you feel more comfortable in flashing AND do a lot research before your next flash.
so i got the KK1 gingerbread working and everything seems to work fine but now my data doesnt work. So I cant get ATT 3g or edge or anything the only internet i recieve is wifi. anyone know why this is? or how to fix it. ive tried a reboot and nothing ive tried changing the settings under network settings.