How do I get my dialpad INSIDE a call to have sound when I press the numbers? I'm not talking about the phone dialer; I already know how to edit those sounds. I'm talking about the dialpad you get when you INSIDE an actual call. The problem is that most ROMs that are coming out nowadays are increasingly forgoing this and are opting for silence.
It's really annoying when I don't have this feature, because when I'm in a call, and I don't have sound feedback when following an automated prompt, I don't really know if the button registered or not, or twice, or whatever.
Thanks!
Oh, I should mention, that I did do some research. No audio from dialpads and such can happen if the system volume is set to lowest. I did confirm in lots of ROMs that the system volume was not lowered; it was set highest. It just has no sound when buttons are pressed.
Related
Does anyone know how to increase the volume with voice commander? and also the ringer volume. I can hardly hear the voice commander and I cant hear the phone ring...
I have the same problem
I tried several registry settings, but the ringtone volume is very low now and can't set it back to original even if setting microsoft voice command to not to speak the incoming caller id...
Anybody out there... help !!!
I think I figured this out by accident. I'm using v2.17 and have a Cardo Scala 500 headset.
To make this simple, I'll refer to the volume controls as left and right; the left side being the pda volume and the right side being the ringer volume.
When not on a call, both volume controls are visible. When on a call, the left side disappears. This is probably by design. Unfortunately, the right side volume control appears to do nothing for me when I'm on a call. I found if I turn up the left side volume way up when I'm not on a call, the Microsoft voice is very loud and almost distorted when I listen through the BT headset. But when the call is made, volume returns to an good level and is clear.
When I first got my phone, I kept my left side volume low because I didn't like hearing all the click-click-click when using the stylus. I could barely use the phone because the volume through the headset was so low. No matter what I did, I couldn't get a good volume through the headset.
Now I keep the pda volume very high so I don't have to fumble with the phone to boost the volume right before answering a call. Calls are clear even if the Microsoft voice is a bit distorted and loud when setting up the call.
I was hoping this might be fixed in the newer ROMs.
Thanks for the quick reply 100Tbps.
But unfortunately the problem i'm facing is not exactly the one you had. My problem is that the ringtone volume on the phone has reduced after installing MS Voice Command (which I want to keep). Initially I had set it to speak out the caller name while incoming call, but that reduced the ringtone volume and the volume of the announcement of incoming caller was itself very low. Then, I tried fixing that by changing some registry values, to no avail.
Now i've disabled announcing of incoming caller name, and still ringtone volume is very low. Can't seem to increase even if all the volume sliders are up at max....
Still in a fix... don't want to hard reset and install everything again...
there is a reg edit for it. i found it in a universal forum or something
Thanks a lot grinny11.
I've installed the file. Would love to see what settings the cab file changes - just to learn a bit... i'm a noob here and a wanna be power user
Anyways, all i need to do now is to wait for someone to call me :lol: don't have a landline or alternate phone.
Will update here if problem solved.
Didn't work
maybe will have to do hard reset after all
thats wierd. it works for me. volume of voice command is just as loud as any other ring tone
quick question..
i have never used voice commander before and i could not find the current info page.
Can anyone provide a link to a page with all it can do? What else can you aside from calling contacts? does it work well? im guessing its not free
thanks
guyver2077 said:
quick question..
i have never used voice commander before and i could not find the current info page.
Can anyone provide a link to a page with all it can do? What else can you aside from calling contacts? does it work well? im guessing its not free
thanks
Click to expand...
Click to collapse
Comparison of the "Big 3 Voice Dialers"
http://forum.xda-developers.com/viewtopic.php?p=295351#295351
kyphur said:
guyver2077 said:
quick question..
i have never used voice commander before and i could not find the current info page.
Can anyone provide a link to a page with all it can do? What else can you aside from calling contacts? does it work well? im guessing its not free
thanks
Click to expand...
Click to collapse
Comparison of the "Big 3 Voice Dialers"
http://forum.xda-developers.com/viewtopic.php?p=295351#295351
Click to expand...
Click to collapse
thanks.. im trying voice command now... im installing to storage card so i hope that isnt a problem.. does this program have any user interface? i noticed it didnt add anything on my programs list
strange.. i press the button that is assigned to voice command.(its the hold mail button by default)
i hear a quick noise but the mic button does not show up on the top.. when i use file explorer and manually open voice cmd program, then the mic shows up for a few seconds..
was i supposed to install to main memory?
edit.. i reinstalled on main memory and im still getting the same problem.. i just hear a quick noise but nothing happens..
edit2.. figured it out.. by default i maps to message button. changed it to record button and it now works
hi , when i call someone i got a very silent dial tone .
any one know how to raise the volume of the dial tone?
i have on original htc tytn 2 with original rom.
(soft reset is not helping)
thanx
kekelen said:
hi , when i call someone i got a very silent dial tone .
any one know how to raise the volume of the dial tone?
i have on original htc tytn 2 with original rom.
(soft reset is not helping)
thanx
Click to expand...
Click to collapse
Mobile phones don't have dial tones, unless you have a Jitterbug phone. You are hearing some other tone, or maybe the sound you are hearing is a byproduct of some part of the phone. For example, on the older model Motorola V3's the EL keypad backlight would emit a low volume tone when lit. Does your "dial tone" stop when the backlight dims or shuts off when in a call? If so then you are hearing the backlight. Most people can't hear it because it is above the range of normal human hearing.
If it is the backlight you are hearing you cannot increase the sound. It is what it is.
-Jay
props for knowledge of the jitterbug.
ChumleyEX said:
props for knowledge of the jitterbug.
Click to expand...
Click to collapse
Yeah, we really ragged on Jitterbug for that (and other things) in another forum I'm in when they first came out.
-Jay
i think i expressed my self wrong.
when i want to call someone and i press his number and then press the call button u should here a sound that the phone is ringing (on the other side).
and that ringing sound is very silent.
is there a way to increase the volume on the ringing sound.
kekelen said:
i think i expressed my self wrong.
when i want to call someone and i press his number and then press the call button u should here a sound that the phone is ringing (on the other side).
and that ringing sound is very silent.
is there a way to increase the volume on the ringing sound.
Click to expand...
Click to collapse
If turning the volume wheel does not do it then there is no way I know of.
-Jay
not just 'a bit silent' then?
no it is realy silent .jou can hear it but if you hold your phone 20-30cm from you ,you cant hear it .
also when putting it on speaker you cant hear it.(because then you are more than 30 cm from your phone.)
when the pickup the sound is fine and loud.
I have the same probleme with my blackstone and its very annoying. if there is some noise you cant heard dial tone when you call someone.
or any on screen buttons in the HTC dialer. anyone know how to get rid of it? its supppper annoying
A little more information would be helpful -
1. does this tone happen when you press a button while on a call?
2. if it does - does your other party hear it or only you?
3. what buttons does it happen on touch screen buttons or only the buttons on the front of the phone?
4. is this when you have speaker phone on or a headset or simply using the phone?
5. is it only when you hang up or any button at any time while on a call?
6. do the buttons make normal sounds when you are NOT on a call?
7. have you turned off sound on your buttons - have you at least tried this to see if it kills the problem?
Bill
when in the dialer go Menu->Options then Keypad: Off
ahh keypad tones off got rid of the annoying beep lol thanks! wish there was a way i keep the beep for the numeric keypad without the obnoxious beep that came out of the speakerphone part rather than the ear piece when backspace/ call history/ speed dial is pressed
jut realized it still makes the annoying noise when it connects to a call
i found that someone had my exact problem on a wings smartphone. they edited the registires in order to turn it off. i played arround with mine all day but no luck. here is the thread if anyone can apply it to a kaiser id be very greatful!
http://forum.xda-developers.com/showthread.php?t=356416
HI guys! I have a little problem on my wings: when I'm already on a call and someone calls me, I don't recevive any acoustic alert; I mean, the screen shows me that there is another incoming call but if I have the phone at my ear I can't see the screen. Is there a way to make the phone ring or vibrate or anything else that tells me that there is another call??
THX
Settings=>Phone=>Call Waiting. Make sure "Provide call waiting notifications" is checked and then go into Settings=>Accessibility and change your In-call alert volume to increase the tone.
Thanks. I found out that I had changed too many keys in the registry
Hi,
I have been having this problem for the last couple of days, for some reason the volume of my ringer has dramatically decreased to the point where i can't hear the phone ring when it's in my pocket (wasn't the case before). When i try to play the ring tone (it's a wave file by the way) using the media player the volume is normal and very loud, the same applies to when i play it from the settings->sounds¬ifications the volume on the ring tone is perfect, but when i receive a phone call the ringer volume is cut down by more than half, i checked the ringer volume and it's set to the max, I also did a hard reset then restored my files using the sprint backup but the problem didn't get fixed, I tried using a different ring tones and the same happens. any help would be greatly appreciated.
There are three volume controls: System, Ring and In call Volume.
Have you checked the System Volume?
If you press up on the hard volume key, you'll see arrow on the top right to switch to the next vol control. Check there.
HTH
ringtone problem
yea all 3 volumes are set to the max level
ringtone volume problem
the phone has the original stock rom from rogers (canada) hope this helps in any way
Have you got any profile managers installed (G-profile, Phoneweaver etc)?
ringtone volume problem
no i dont have a profile managers installed... so i just noticed that when the phone start ringing and i dont pick up, a second before the phone stops ringing the volume of the ringtone increases to the normal level (then stops ringing), the increase of the ringtone volume happens for like a split second after the caller hangs up and the phone stops ringing. hope this helps in any way. Thank you
Sounds like you have a Ringtone delay problem, there are a couple of solutions.
1. Disable HTC dialer (and use the Winmo one instead), can be done using Advanced Configurator 3.3.
2. Try the CAB I've attached, remember to only use WAV as ringtone though.
I would also recommend adjusting Call Forwarding timing to 30seconds. Settings/Phone/Services/Call Forwarding and get settings.
Disabling the HTC dialer is probably going to be the best solution as the HTC dialer is a hungry resource eating monster but I would just try the CAB and adjusting Call Forwarding time. There are some other REG setting as well but I never found them useful.