Database Develop

Using my phone's GPS with a laptop app

How can I use my phone's GPS with a program like Streets and Trips or Street Atlas?
I often use my laptop while on the road (the wife drives) and would prefer a better option than TT6 Navigator.

you might have to get a USB gps puck for the laptop

GPS
Does that mean it can not be done? I have an interest in this also.

you need...
you need to expose your GPS to an external serial BT port. I think there is a tool called BlueGPS that does this. You can then use BT on your laptop to get the NMEA output. It makes your integrated GPS phone act like a BT GPS device for your laptop.

JonnoB said:
you need to expose your GPS to an external serial BT port. I think there is a tool called BlueGPS that does this. You can then use BT on your laptop to get the NMEA output. It makes your integrated GPS phone act like a BT GPS device for your laptop.
Click to expand...
Click to collapse
I use BlueGPS with my tilt over USB and it works well, except if I try to use Internet Sharing or WMWifiRouter it disconnects the com port. I haven't been able to get BlueGPS to work with Bluetooth of Wifi yet. So it only works with programs that have the maps on the computer and not ones like GooPS that get the maps from the Internet.
Mike H

I downloaded the BlueGPS CAB, but cannot seem to get it to work.
Any specific instructions on how to get this BlueGPS work on the phone and have the laptop computer use the phones internal GPS receiver over bluetooth?
Attached is the BlueGPS installer CAB.
Thanks
Ron

Old thread...but after much investigation, I have discovered what you need is gps2blue, not BlueGPS!
gps2blue is free, and will do what is desired here.

GPS2Blue
GPS2Blue is here: http://users.skynet.be/hofinger/GPS2Blue.html
^_^
.-A-

Is this program only for PDA or is there possibility for Andoid device...

Nook Color "standalone" GPS... there's gotta be a way...

I've seen these simple USB GPS receiver antennas that hook to a laptop for GPS duties so naturally I'm thinking why can't this be done for the nook. Ideally we would have a dual/split port so power could still be supplied at the same time.
I'd rather have this config since I don't like the idea of tethering to a GPS capable cell for privacy reasons and it ties up the cell too.
Why couldn't this be possible? Is it just a matter of the Nook recognizing the GPS antenna and being able to get a software package to recognize it?
Any ideas?

With CM7, and a bluetooth GPS reciever, this is no problem. We will never be able to build a GPS into the device, but we can get close enough...

Yes, my intention would be to leave the GPS antenna in the vehicle and just hook up when I get in. Along with MP3 duties of course. It shouldn't be hard to find or make a USB gender changer with dual connections.

KDOG2020 said:
Yes, my intention would be to leave the GPS antenna in the vehicle and just hook up when I get in. Along with MP3 duties of course. It shouldn't be hard to find or make a USB gender changer with dual connections.
Click to expand...
Click to collapse
Im not following, sorry.
I just ordered a "kit" for my NC actually - a car window mount, and a stand-alone BT GPS. I plan on attaching the the GPS to the window mount via velcro, and leave it in the car. You don't need USB at all (nor would it work, since our nook does not currently support usb host). Just get a BT module, and leave it in the car; connect it to the nook when you need it. done.

Ok I see what your saying. But Im not familiar with Bluetooth recievers. Are we talking about just a regular GPS with a screen and all? Then why hook it up to the nook? Or are we talking about a little box that just sits on the dash or tucked away somewhere?

KDOG2020 said:
Ok I see what your saying. But Im not familiar with Bluetooth recievers. Are we talking about just a regular GPS with a screen and all? Then why hook it up to the nook? Or are we talking about a little box that just sits on the dash or tucked away somewhere?
Click to expand...
Click to collapse
Ah, let me fill ya in then.
What i am talking about are standalone recievers - nothing more than a GPS and BT transmitter. No screen, no frills. Most have batteries that will last for weeks, and are small enough to store anywhere in the car when not in use. YOu can see a good selection here:
http://www.amazon.com/s/ref=nb_sb_n...eiver&keywords=bluetooth+gps+receiver&ie=UTF8
Hope that may give you some new ideas.

Aaaahhhh..... yes I see now. So it would be just a matter of finding one thats compatible with our NC's and the software for it... cool. Anyway to know which one works the best for the Nook?

KDOG2020 said:
Aaaahhhh..... yes I see now. So it would be just a matter of finding one thats compatible with our NC's and the software for it... cool. Anyway to know which one works the best for the Nook?
Click to expand...
Click to collapse
Now, i guess i cannot guarantee, but in theory, ANY BT gps should work with our system, since all GPS's transmit in the same standard. All you should need for software on the nook will be:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
Assuming my GPS arrives sometime soon, i will be able to give ya some first hand advice.

You will still need a data connection if you intend to use Google Maps for your GPS software.
If you want to use it without a data connection, you will need something like this:
https://market.android.com/details?id=com.alk.copilot.market.usa&feature=search_result
"maps stored on your phone, not downloaded"
Also note, Bluetooth range is very limited on the NC. My BT GPS has to be within 2 feet of the NC to connect.

That is true, a stand alone program is the best, but google will cache the maps if you pre-plan the route.
As for distance - with a car mounted GPS< you really don't need to worry about that - the GPS should be by the windshield anyway, so keeping it close to the nook isn't an issue..

What about this Google "Navigation" program that is on the nook? (the blue arrow)

KDOG2020 said:
What about this Google "Navigation" program that is on the nook? (the blue arrow)
Click to expand...
Click to collapse
You'd still need a data connection. The best probable solution would be to tether to a smartphone that has GPS - so the Nook has a data connection for the Google Maps and Navigation, and GPS data from the phone's GPS.

I was interested in the same thing and went so far as to successfully pair my Garmin bluetooth gps unit with my CM7 nook, but I was not able to actually read any gps data. (This unit was successfully used with a linux laptop and car computer, so it works in linux.)
While looking for a way (hack or software) to read the gps data I found the TetherGPS app, which meets my needs- and yes, I have received phone calls and browsed the web on the phone while using nav on the nook without problems.
The biggest issue I have found in the past and NOW is that I do not think much of the other gps nav options available on Android (or linux!) and caching a limited tileset with Google maps is not enough for my needs. My routes often change.
I do have another bluetooth puck around, if I can find it... I will test to see if that one is easier for the Nook to read data from.

rogerdugans said:
I was interested in the same thing and went so far as to successfully pair my Garmin bluetooth gps unit with my CM7 nook, but I was not able to actually read any gps data. (This unit was successfully used with a linux laptop and car computer, so it works in linux.)
While looking for a way (hack or software) to read the gps data I found the TetherGPS app, which meets my needs- and yes, I have received phone calls and browsed the web on the phone while using nav on the nook without problems.
The biggest issue I have found in the past and NOW is that I do not think much of the other gps nav options available on Android (or linux!) and caching a limited tileset with Google maps is not enough for my needs. My routes often change.
I do have another bluetooth puck around, if I can find it... I will test to see if that one is easier for the Nook to read data from.
Click to expand...
Click to collapse
It will pair, but you need to use an intermediary program to access the GPS, like this one:
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
or this one:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or this:
https://market.android.com/details?...oid.addon.bluetooth.GPS&feature=search_result

I had trouble with some GPS apps.
I was able to use the GPS and data access on my Motorola Cliq to have GPS voice guided navigation.
http://forum.xda-developers.com/showthread.php?p=12076390
That is how I accomplished it.
If you have a hardware GPS, then you only need the 1 app, which is even easier, but I still recommend wifitether or barnicle for data access (you can download the maps for offline use if you plan ahead.)

colorado_al said:
It will pair, but you need to use an intermediary program to access the GPS, like this one:
https://market.android.com/details?id=googoo.android.btgps&feature=related_apps
or this one:
https://market.android.com/details?id=de.mobilej.btgps&feature=search_result
or this:
https://market.android.com/details?...oid.addon.bluetooth.GPS&feature=search_result
Click to expand...
Click to collapse
I actually tried those apps to no avail, which is why I started looking for the other puck (not as accurate but easier to connect) and alternative solutions.
I actually had looked at all of the other (non- Google) nav apps for Android before to use with a now unused Droid (original) but found them all to be ... less than desirable for various reasons.
Note that I am NOT trying to discourage this project- it is possible, I am certain, but much like linux navigation software... lacking a certain "polish" if not functionality.

Bluetooth Tethering v Wifi Hotspot

Currently been using my Nexus with my GSII and bluetooth tethering for internet access, thinking that bluetooth being lower powered, short range, its probly less demanding on the phones battery.
Does this still apply to modern devices with combined radios?
Also has anyone found a widget to connect/reconnect to a paired bluetooth device?
I think the nexus is going to deep sleep, and closes the connection to the phone. But it doesn't bring it back when it wakes...which means its Settings>Bluetooth>Click on Phone...which is 2 clicks too many!

cjb110 said:
Currently been using my Nexus with my GSII and bluetooth tethering for internet access, thinking that bluetooth being lower powered, short range, its probly less demanding on the phones battery.
Does this still apply to modern devices with combined radios?
Also has anyone found a widget to connect/reconnect to a paired bluetooth device?
I think the nexus is going to deep sleep, and closes the connection to the phone. But it doesn't bring it back when it wakes...which means its Settings>Bluetooth>Click on Phone...which is 2 clicks too many!
Click to expand...
Click to collapse
just got it set up, it works great! Thanks for this, I was using Wi-fi tether the other day, killed all 3 of my batteries

I've been using WiFi tether at work; are you guys saying that using Bluetooth tether is less cumbersome on the battery?

I've been trying bluetooth tether all day today.
I have GSM Galaxy Nexus running official 4.1.1
Nexus 7, on 4.1.1 also.
I get them bluetooth paired up and bluetooth tethered via the Galaxy Nexus' cell data.
It works for like a minute then after that, they would disconnect (unpair from bluetooth).
Been doing this all day long every time I try.
Also the 2 are only 3ft away.
Any Ideas?
EDIT: Just saw this URL from another post.. guess it's a bug: http://code.google.com/p/android/issues/detail?id=22369

nxt said:
I've been trying bluetooth tether all day today.
I have GSM Galaxy Nexus running official 4.1.1
Nexus 7, on 4.1.1 also.
I get them bluetooth paired up and bluetooth tethered via the Galaxy Nexus' cell data.
It works for like a minute then after that, they would disconnect (unpair from bluetooth).
Been doing this all day long every time I try.
Also the 2 are only 3ft away.
Any Ideas?
EDIT: Just saw this URL from another post.. guess it's a bug: http://code.google.com/p/android/issues/detail?id=22369
Click to expand...
Click to collapse
Same setup, and same issue.
On a side note is there a way to use NFC to automatically pair the two devices via Bluetooth? I'd like to just touch them together and voila they are paired?

doctahjeph said:
Same setup, and same issue.
On a side note is there a way to use NFC to automatically pair the two devices via Bluetooth? I'd like to just touch them together and voila they are paired?
Click to expand...
Click to collapse
Just to pair normally? No.
But if you beam a picture, it auto turns on the bt, pairs, sends the picture, then turns off bt. The two devices does not have to be paired up beforehand either.
Google did show off new feature of NFC/BT at Google I/O during the sessions.
They showed off headphones and speakers that when you touch your JB device to the headphone/speaker, it auto pairs and audio starts playing.
So yes it's possible to auto pair devices, but those other devices need to support it.

This is a known bug with the galaxy nexus phone. It will kill BT tether when the phone goes into sleep.
Download an app called wake lock from the play store and set a partial wake lock and the problem will go away.
Your battery drain will be slightly higher though.
Sent from my Nexus 7 using xda premium

ManMythLegend said:
I've been using WiFi tether at work; are you guys saying that using Bluetooth tether is less cumbersome on the battery?
Click to expand...
Click to collapse
So far it seems to be, which it should as Bluetooth is a short range low powered protocol.
I wasn't sure that with the modern design in phones, when the radio's are all one chip, if the power saving would still apply.

nxt said:
I've been trying bluetooth tether all day today.
I have GSM Galaxy Nexus running official 4.1.1
Nexus 7, on 4.1.1 also.
I get them bluetooth paired up and bluetooth tethered via the Galaxy Nexus' cell data.
It works for like a minute then after that, they would disconnect (unpair from bluetooth).
Been doing this all day long every time I try.
Also the 2 are only 3ft away.
Any Ideas?
EDIT: Just saw this URL from another post.. guess it's a bug: http://code.google.com/p/android/issues/detail?id=22369
Click to expand...
Click to collapse
Try turning off your WiFi before pairing....I think that worked for me

Are you guys using that PDAnet and FoxFi setup in order to pair the devices? Thats the only way I can bt pair my galaxy nexus and nexus 7 together.

mmm, nope its native feature in the Resurection Remix rom I'm using on my GSII

Not having any luck installing PDANet 3.5 on the Nexus 7, any ideas?
Got FoxFi installed on my HTC Desire and ticked Bluetooth DUN. Can pair it to tablet but tablet doesn't get any Internet access, so need PDANet installed for that I think.
Edit: PDANet 2.20 on the market was installable, bluetooth tethering working ok now. Really old version though...
Further edit: Looks like it is "PDANet Tablet" version I'm using, hence the confusion. 2.20 appears to be the latest one.

Just tested BT tethering on my N7 with my SGS2 (which was using wifi at the time). Worked perfectly. I did a quick speedtest and got 750kbps down and 1500kbps up (weird wifi...). I was shocked I would get such good speeds over BT. Anyway, I like this option better then a wifi hotspot. First, it's easier to setup. Second, it (apparently) uses less power. And third, it will allow me to access some special hotspots I might not get on my tablet. For example, with AT&T, they give you free hotspot access at some locations with their devices. I wouldn't be able to use my tablet there directly, but could daisy chain through the phone. Coolbeans.

Bluetoothkeepalive works to keep the bluetooth connection for bluetooth tethering. Just trying it out and hasn't dropped yet over about 15 minutes.

OK a little help please. First off nothing is rooted.
I have installed pdanet and fifox on my HTC sensation. I can connect the Bluetooth from my nexus 7 to the sensation but I can't get internet access. I checked the setting in the Nexus "Use for internet access" but still nothing.
What else should I try?
Thanks for your help
Sent from my Nexus 7 using xda app-developers app

bigbeerdrinker said:
OK a little help please. First off nothing is rooted.
I have installed pdanet and fifox on my HTC sensation. I can connect the Bluetooth from my nexus 7 to the sensation but I can't get internet access. I checked the setting in the Nexus "Use for internet access" but still nothing.
What else should I try?
Thanks for your help
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Go on the tablet, into Bluetooth, and you should see your phone in there, click on it. It'll then say connected. You'll get internet access.

I have now noticed that the bluetooth connection does drop after a minute or so, which can be a little annoying.
I'll try bluetoothkeepalive.
Another good app to get is Bluetooth Auto Tethering, it keeps tethering as an option on every time your phone boots, no extra interaction on the phone to enable tethering every time. Just enable/disable the connection from the tablet to automatically turn tethering on/off on your phone!

bigbeerdrinker said:
OK a little help please. First off nothing is rooted.
I have installed pdanet and fifox on my HTC sensation. I can connect the Bluetooth from my nexus 7 to the sensation but I can't get internet access. I checked the setting in the Nexus "Use for internet access" but still nothing.
What else should I try?
Thanks for your help
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
You might try going to Settings - More - Tethering & portable hotspot - check wi-fi hotspot and configure

barbo said:
You might try going to Settings - More - Tethering & portable hotspot - check wi-fi hotspot and configure
Click to expand...
Click to collapse
You are right about that, I got stuck on doing that yesterday. As for the general discussion about bluetooth tethering vs. wifi tether. I tried it out today and I can say its much better on the battery life, but the speed is pretty low. I keep doing a speed test on my phone and couldn't get over 1.48 Mbps, then tried wifi tether and was easily getting over 5Mbps.

[Nook HD] Bluetooth Connections?

Hi there....
Picked up a Nook HD the other night. Got ADB going and sideloading but haven't rooted as yet.
One of the Apps I'm using connects to a Bluetooth GPS puck (Nokia LD-3W). I can pair the device (shows as paired but not connected after pairing/pin is completed).
The problem is that the connection can be established to the puck about 1 in 35 attempts. Once the connection is up and running the data transfer (position) is OK so that proves that the connection can work.
I've got ADB up and running and examined the logcats for the pairing and connection process. I can't really tell anything meaningfully different between a failed and good connection aside from a bluetooth message that the device state is connected on a successful connection.
Can anybody give me some pointers on further steps to diagnose the problem? Happy to post logcats as needed......
Thanks,
John.

matthewsjl said:
Hi there....
Picked up a Nook HD the other night. Got ADB going and sideloading but haven't rooted as yet.
One of the Apps I'm using connects to a Bluetooth GPS puck (Nokia LD-3W). I can pair the device (shows as paired but not connected after pairing/pin is completed).
The problem is that the connection can be established to the puck about 1 in 35 attempts. Once the connection is up and running the data transfer (position) is OK so that proves that the connection can work.
I've got ADB up and running and examined the logcats for the pairing and connection process. I can't really tell anything meaningfully different between a failed and good connection aside from a bluetooth message that the device state is connected on a successful connection.
Can anybody give me some pointers on further steps to diagnose the problem? Happy to post logcats as needed......
Thanks,
John.
Click to expand...
Click to collapse
Try using the BluetoothGPS app from the Play store. Also enable mock locations.

hwong96 said:
Try using the BluetoothGPS app from the Play store. Also enable mock locations.
Click to expand...
Click to collapse
BluetoothGPS won't install as it states that it's missing a shared library. I've installed one of the other BT-GPS tools and that hasn't rendered any success.
I've had mock locations on/off and it hasn't made the magic difference either.
John.

matthewsjl said:
BluetoothGPS won't install as it states that it's missing a shared library. I've installed one of the other BT-GPS tools and that hasn't rendered any success.
I've had mock locations on/off and it hasn't made the magic difference either.
John.
Click to expand...
Click to collapse
Have you tried Copilot app?

hwong96 said:
Have you tried Copilot app?
Click to expand...
Click to collapse
I'm not after car navigation.
The connection sometimes works from a BT GPS puck but most times the Nook just doesn't connect.
John.

matthewsjl said:
I'm not after car navigation.
The connection sometimes works from a BT GPS puck but most times the Nook just doesn't connect.
John.
Click to expand...
Click to collapse
Hmmn. Maybe it's my GPS puck that isn't behaving correctly. I had another device and that connected and was rock steady.
More investigation required!
John.

Try it using the sdcardCM10 ROM instead of the stock/sideloaded/rooted nook OS.

r1c47 said:
Try it using the sdcardCM10 ROM instead of the stock/sideloaded/rooted nook OS.
Click to expand...
Click to collapse
I'd love to - but I haven't seen a CM10 SD release for the Nook HD - only the HD+.
John.

Connect hotspot when connect to car bluetooth

Googling shows mixed results over whether this will be possible.
When my phone connects to the car Bluetooth, can mobile hotspot also turn on so my car sat nav can use the phone data?
Currently I have to turn it on manually each time.
Thanks

candell77 said:
Googling shows mixed results over whether this will be possible.
When my phone connects to the car Bluetooth, can mobile hotspot also turn on so my car sat nav can use the phone data?
Currently I have to turn it on manually each time.
Thanks
Click to expand...
Click to collapse
I do it with secure setting plugin... but you need to be rooted.
Regards,

Sorry for a possibly dumb question, I am new to android. Does Tasker provide additional functionality when rooted?

candell77 said:
Googling shows mixed results over whether this will be possible.
When my phone connects to the car Bluetooth, can mobile hotspot also turn on so my car sat nav can use the phone data?
Currently I have to turn it on manually each time.
Thanks
Click to expand...
Click to collapse
Can be done:
State: BT near (select BT from Nav device) -> task wifi set off, wait 2 seconds, wifi tether set on.
On android 6 I used secure settings for also switching bluetooth tether on. This doesn't work for me in android 7.0.
I now use the app Blue Car tethering. This checks for a bluetooth network and then forces bluetooth tethering.
This is unrooted for both phones.

From what I gather, YMMV depending on the phone, head unit, or even carrier. This works to turn on the hotspot and re-enable wifi/turn off hotspot when the bluetooth connection drops for my current setup (rooted Honor 6X/Android 6, Cricket Wireless, Android 4.4 head unit):
Profile state=BT Connected CAR KIT,*
Action=WiFi Tether Set On
Exit=WiFi Set On
I don't need secure settings for that to work on my Honor 6X, but I have two other phones that profile doesn't work on, so you might have to play around to get something that works for your particular setup

I've got it working, thanks for the help folks

candell77 said:
I've got it working, thanks for the help folks
Click to expand...
Click to collapse
Would you mind sharing how? It would be very useful to me. Thanks :good:

Sure, create a new profile based on State
In the filter type 'BT'
Then click BT Connected
Then select or type the exact name of the bluetooth connection of your car
Then create a new task for Tether On (instead of trying to find the options, I find it much easier to search)
Job done, works every time for me. As tether automatically turns off itself after xx minutes of not being used, I didn't bother setting an exit task to turn it back off.

Is this related to Bluetooth tether or wifi mobile hotspot?
I'm looking for an automated solution for my car android 2din device.