So for the past two days I've been trying to flash the new AOSP Gingerbread ROM, but although I follow everything straight from the wiki it always seems to get stuck on the HTC screen after the last reboot. Help me please!
EDIT: So I somehow got the rom to boot last night using RA recovery but after loading up a notice says Setup Wizard not being able to respond...etc, etc. Also after booting my home, call, and search buttons don't work at all. not even for other roms. PLEASE HELP!
020211 So after following instructions from this post: http://forum.xda-developers.com/showpost.php?p=11078749&postcount=4860 i was finally able to boot CM7 fully and without problems. If you're having problems with booting aosp's gingerbread rom just use this guy's instructions (at the bottom) and you should be good to go.
Make sure u install manually through clockworkmod mod first format boot system data and cache then install the rom let it boot then reboot and install gapps without wiping and reboot then you should be good I'm using the normal clockworkmod 2.5.2 and it works great
Sent from my HTC Hero CDMA using XDA App
okay thanks! ill try that and get back to you.
so no luck at booting. i'm still stuck at the HTC Boot screen.
i tried also and still no luck .. i hate this
to anybody having problems flashing GB, try these steps EXACTLY:
1) use clockwork 2.5.0.1 and follow the wipe/format process in the wiki
2) flash the rom then gapps
3) FLASH A CAPPED 691 KERNEL
This seems to be a continued issue, and I think it is because some phones can't handle high clock speeds like 768. The recovery currently posted by aosp (cwm 3.0.0.5) is overclocked and therefore will not boot, same with the kernel in the rom. Report back here if it works, I have already updated the wiki to advise people of this. Good Luck.
So i tried it again with the capped kernel and it still didn't work. also tried it without firerat's MOD but still a no go.
I'm upgrading aosp 2.3.2 rom from nightly build #188. Before flashing aosp rom plesae try to wipe everything like data, dalvik-cache, battery and rotate status. BTW, I'm using RA-Recovery not ClockworkMod.
i installed it after the standard wipes and thats it and its working just fine at 768 on my hero200. didnt have any issues and im loving the rom, but i am having one issue. this link is to my issue in q and a. if you can help feel free to hop on my thread and reply. other than that, i juast wanted to say this rom is great!
sai5o4 said:
So i tried it again with the capped kernel and it still didn't work. also tried it without firerat's MOD but still a no go.
Click to expand...
Click to collapse
Did you also flash a capped recovery?
sent from my hero, which no longer sucks ass
il Duce said:
Did you also flash a capped recovery?
sent from my hero, which no longer sucks ass
Click to expand...
Click to collapse
I agree with that. He should try a recovery that's not overclocked.
Root-Hack-Mod-Always™
Yeah I'm using clockwork 2.5.0.1.
sai5o4 said:
Yeah I'm using clockwork 2.5.0.1.
Click to expand...
Click to collapse
Well, I hate to say it but you must be missing a step somewhere. FYI in the OP for gingerbread the cwm3.0.0.5 is now capped at 691, so try that one again. Wipe both wipe options, go to mounts and format boot,system,data,cache, then gn into advanced wipe dalvik twice. Flash the rom,gapps,deca #43 capped 691 kernel, reboot. The first boot should take a while so be patient. Report back here if you can't get it, and I would recommend going into the live help room (aospbot IRC) which in the OP for GB. Good luck.
So still no luck. But I'm determined to somehow fix this no matter how many times I try!
Sent from my HERO200 using XDA App
sai5o4 said:
So still no luck. But I'm determined to somehow fix this no matter how many times I try!
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
I think you should back up your sd card and then format it in your pc. Then start all over. From the recovery on down. Skip any mods till you get booted up. Like keyboards and boot screens etc. And try the capped cwm recovery. Hope it helps good luck
Something.About.Me.You.Dont
Like.Its.Cool.I.Understand.AWAH
Still no luck on booting aospCMod. Like they say no two heroes are the same. But that doesn't mean I'm still not going to try again and again and again (xinfinity).
got it to boot but...
so i somehow got it to boot using ra-recovery but right as i loads it says the setup wizard has unexpetedly stopped processing. any help?
sai5o4 said:
020211 So after following instructions from this post: http://forum.xda-developers.com/showpost.php?p=11078749&postcount=4860 i was finally able to boot CM7 fully and without problems. If you're having problems with booting aosp's gingerbread rom just use this guy's instructions (at the bottom) and you should be good to go.
Click to expand...
Click to collapse
Glad I could help man! Glad to see you got it worked out!
There's a readme in the Aosp 2.3.2 OP. It's right under the files, labeled README. I think it would help if anyone having trouble actually reads through this. skipping steps causes problems.
also, Factory reset skips over the /system partition. I recommend wiping /system partition if you're coming from another rom, or if you are decided to start fresh. You have to go into the partitions menu to actually format the /system partition.
mtran2988 said:
You have to go into the partitions menu to actually format the /system partition.
Click to expand...
Click to collapse
This is true if you use CWM (which I do not ) but if you fastboot wipe all the partitions you will have no issues w/ RA as the OP discovered once he used the instructions that I posted.
touble with vvm
uh not quite sure if this is rite place to post this but looked better than the rest, so i got the rom running fine and it is wonderful improvement to my what use to be my wifes stock hero. Only problem is with the visual voice mail, i copied it from the stock hero before flashing, than after flashing copied it back, it works in the sense that i can see the voicemail in the app and even the voicemail to text works, but 2 things are wrong, 1 is i cant clear voicemail notification in the status bar without rebooting phone, and now she gets a text from a 9069 that tells her phone has recieved a voicemail, found a work around for the second one i blocked the number using blacklist so the text dont come thru nomore, but how i can i fix the fact that the only way to clear the voicemail notification is to reboot the phone? Any help, comments or suggestions would be greatly appreciated. Or is there somewhere i can dl the latest sprint vvm app?? or are they device specific. Thank you in advance for any help
Related
Hi!
Yesterday my msging app wouldn't open so I rebooted the phone, something I do at least once every 2 days, and it booted into recovery without me touching anything.
This error would also show up:
E:Can't read MISC:
(No space left on device)
I can't do ANYTHING. It ALWAYS goes to recovery mode. reboot bootloader goes into recovery. power + camera button goes into recovery. letting it boot goes into recovery.
--all with the same error in recovery, the can't read misc thing.
Did anyone have this problem? I didn't even flash anything, i was just rebooting the phone like I always do and it just appeared. Any ideas? Is this bricked? I don't want to get a new phone until I know I've tried everything. I've already scoured the net for this error with no results.
Thanks!
What recovery do u have? Do u know your phone info? Running a custom Rom? What have u done to the phone before now?
Not bricked btw if u can get into recovery it's fixable
Sent from my HTC Magic SparksMod using XDA App
Hey, thanks for replying!
I'm using RA 1.7 recovery, not sure what phone info you want, its a G1, I'm using CM 6.0 RC1 and have been using for a month now, and before that I've just been using CM, keeping my phone up to date with the stable releases (I don't flash the nightlies)
I'm glad that its not bricked. The problem is that it ONLY boots into recovery, even if I don't press anything...
Thanks!
johnson8cyl said:
What recovery do u have? Do u know your phone info? Running a custom Rom? What have u done to the phone before now?
Not bricked btw if u can get into recovery it's fixable
Sent from my HTC Magic SparksMod using XDA App
Click to expand...
Click to collapse
Ok. I'm looking for spl and radio. Do u have danger spl? Or firerat mtd patch? Sounds like u ran out of internal memory somehow and now won't boot into os is why I ask
Sent from my HTC Magic SparksMod using XDA App
Oh Gotcha - yeah I followed the guide on the CM wiki, so I have danger SPL i believe, and yes, I used firerat's MTD patch
If i remember correctly I used the "all" thing so it went through everything in that patch.
I did that maybe around the time I got CM 6 - so I've been using CM6 and firerat's patch for maybe a month before this happened.
thanks!
johnson8cyl said:
Ok. I'm looking for spl and radio. Do u have danger spl? Or firerat mtd patch? Sounds like u ran out of internal memory somehow and now won't boot into os is why I ask
Sent from my HTC Magic SparksMod using XDA App
Click to expand...
Click to collapse
Interesting. U don't need danger and mtd patch they do the same thing. I'm confused but maybe u have conflicting internal memory partitioning and that's causing it. Do u have a nandroid backup u can go back to that will boot into the os?
Sent from my HTC Magic SparksMod using XDA App
I do but it gives me the same error:
"Can't read MISC: etc etc etc"
This happens when I try to do anything, data wiping, wiping the cache, anything!
I don't even know if it acutally restored the image or not or if the wipe actually happened, because the progress bar is always present for whatever I'm trying to do, its just at the end the error comes up.
In terms of wiping I've tried wiping everything and installing CM6, to no avail. I can't re-reroot the device or downgrade it because recovery always comes up instead of fastboot... I'm stuck!!
Thanks for your insight!
If u plug your phone into the computer and select USB toggle does your sdcard show up on your computer?
Sent from my HTC Magic SparksMod using XDA App
Yep! I can select that MOUNT SD thing and I can transfer files over. Thats what I did to try and flash the rom again, but like always it just gives me that error after its done.
Well i hope you have a spare phone for the time being. I will try to figure something out and keep you informed. Or someone smarter than me will come along and give you the answer. It seems several people have had this prob. but i have not found the solution. Has to be something you can do from a shell in recovery mode to create some space or something to get back into the os. Ill get back with you hopefully with some good news.
johnson8cyl said:
Well i hope you have a spare phone for the time being. I will try to figure something out and keep you informed. Or someone smarter than me will come along and give you the answer. It seems several people have had this prob. but i have not found the solution. Has to be something you can do from a shell in recovery mode to create some space or something to get back into the os. Ill get back with you hopefully with some good news.
Click to expand...
Click to collapse
yeah hopefully something like that will be a solution.. thanks!
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=669019
It would appear that you can run adb commands while in recovery using a shell. Maybe you can do that and use df to see what has low space. When you find that out you can cd to that directory and type ls and get a list of what is in that directory. Maybe delete a few things to clear some space? Can anyone confirm this?
johnson8cyl said:
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=669019
It would appear that you can run adb commands while in recovery using a shell. Maybe you can do that and use df to see what has low space. When you find that out you can cd to that directory and type ls and get a list of what is in that directory. Maybe delete a few things to clear some space? Can anyone confirm this?
Click to expand...
Click to collapse
Yeah I saw that post but I didn't try what the guy suggested - I will definitely try this when I get home. Too bad that post ended up having no resolution.
johnson8cyl said:
Well i hope you have a spare phone for the time being. I will try to figure something out and keep you informed. Or someone smarter than me will come along and give you the answer. It seems several people have had this prob. but i have not found the solution. Has to be something you can do from a shell in recovery mode to create some space or something to get back into the os. Ill get back with you hopefully with some good news.
Click to expand...
Click to collapse
If your in recovery, can't you just do a full wipe ?
crz6662 said:
If your in recovery, can't you just do a full wipe ?
Click to expand...
Click to collapse
He tried. Doesn't seem to be working. Gets same error. Need more help. Lol. Fun fun.
Sent from my HTC Magic SparksMod using XDA App
johnson8cyl said:
He tried. Doesn't seem to be working. Gets same error. Need more help. Lol. Fun fun.
Sent from my HTC Magic SparksMod using XDA App
Click to expand...
Click to collapse
Yeah, when I do a full wipe it says wipe completed and then right after I get the same error.
What could be wrong!!
Ok, looks like you are in the elite group....this issue is not that common...
See below thread...some useful information from Lbcoder and ezterry....check and see if this can help..
http://forum.xda-developers.com/showthread.php?p=7225151
harryema said:
Hi!
Yesterday my msging app wouldn't open so I rebooted the phone, something I do at least once every 2 days, and it booted into recovery without me touching anything.
This error would also show up:
E:Can't read MISC:
(No space left on device)
I can't do ANYTHING. It ALWAYS goes to recovery mode. reboot bootloader goes into recovery. power + camera button goes into recovery. letting it boot goes into recovery.
--all with the same error in recovery, the can't read misc thing.
Did anyone have this problem? I didn't even flash anything, i was just rebooting the phone like I always do and it just appeared. Any ideas? Is this bricked? I don't want to get a new phone until I know I've tried everything. I've already scoured the net for this error with no results.
Thanks!
Click to expand...
Click to collapse
Yeah I found that thread already... but like me they didn't find a solution either. Plus I do not have a backup misc image so me deleting it would be rather disasterous.
Any other ideas or things I could try?
I'm just about ready to wait for the desire Z or the galaxy S instead of trying to tinker with this old phone...
My Hero Is Now Stuck AT The NOW Of The Sprint Animation.
I was trying to Put the latest 651.2 ROM On My Hero.
It Already Had NFX 651.7 And I was updating it to stock.
Now I S-OFF N FROM THAT SCREEN i was able to Load RUU .5
root it , install recovery and everything.
but when i flash a new rom it jus wont work.....
it would just stuck at Sprint ANimation @ NOW.... HTC Quietly Brillant then again NOW... only this happens n then i remove battery and switch off and ask you peole for help
I able to HBOOT Also I Can Enter Recovery but i cant Flash a ROM ,Actaully the ROM gets Flashed but never works...
I was havin so much fun with this n now.....
please some 1 help me....please.... I Want Froyo on my hero plssss
Also the nandroid is giving me errors.
You can boot into recovery, so I assume that you are wiping all of the data?
if not, do a full wipe (everything).. Next, I'd recommend backing up everything
on your SD card to your computer, and erasing the SD card.
Then flash the rom of your choice, following the instructions given for the rom.
If you used custom mtd partitions, your nandroid probably will not work unless
you restore the custom partitions that were in place when you took the
nandroid. Generally speaking, when you RUU your phone is restored to factory,
including your custom recovery. When flashing a custom rom, or running a RUU,
sometimes the phone will sit at the "NOW" screen for a long time. I had my phone
sit at the "NOW" screen for almost 15 minutes once. If the phone is boot
looping, then it probably has a bad flash, or has some configuration data that
isn't compatible with the rom you are installing, hence the full wipe before flash.
ahhh only AOSP roms are working on my Hero (
M Using DarchDroid 2.8 but i cannot disable data so my bill rose from 500 a month to 1300 last month beacuse of data usage....
erik tried helping but all in vain (
although the phone is not bricked but i can only used Either custom rom or aosp rom also on custom i cant have a2sd (
djkoolk said:
ahhh only AOSP roms are working on my Hero (
M Using DarchDroid 2.8 but i cannot disable data so my bill rose from 500 a month to 1300 last month beacuse of data usage....
erik tried helping but all in vain (
although the phone is not bricked but i can only used Either custom rom or aosp rom also on custom i cant have a2sd (
Click to expand...
Click to collapse
Wait, you have a SPRINT hero? And they didn't make you have an UNLIMITED DATA plan that is REQUIRED for this phone? Better call them for your money back and a new phone bud.
Anyway, do a full complete wipe of the phone, wipe data, system, boot, cache, dalvik, cache partition, then do a factory reset, then flash a rom ,then boot. Let me know how that works.
Twolazyg said:
Wait, you have a SPRINT hero? And they didn't make you have an UNLIMITED DATA plan that is REQUIRED for this phone? Better call them for your money back and a new phone bud.
Anyway, do a full complete wipe of the phone, wipe data, system, boot, cache, dalvik, cache partition, then do a factory reset, then flash a rom ,then boot. Let me know how that works.
Click to expand...
Click to collapse
Bro, M In India,
This was a Clean E_S_N Fone registered to use in I N D I A...
Here we dont have unlimited plans....
I will try your method with a new Memory card lets see how that goes...
djkoolk said:
Bro, M In India,
This was a Clean E_S_N Fone registered to use in I N D I A...
Here we dont have unlimited plans....
I will try your method with a new Memory card lets see how that goes...
Click to expand...
Click to collapse
Wow, I can't believe sprint can get away with that.. Good luck
djkoolk said:
My Hero Is Now Stuck AT The NOW Of The Sprint Animation.
I was trying to Put the latest 651.2 ROM On My Hero.
It Already Had NFX 651.7 And I was updating it to stock.
Now I S-OFF N FROM THAT SCREEN i was able to Load RUU .5
root it , install recovery and everything.
but when i flash a new rom it jus wont work.....
it would just stuck at Sprint ANimation @ NOW.... HTC Quietly Brillant then again NOW... only this happens n then i remove battery and switch off and ask you peole for help
I able to HBOOT Also I Can Enter Recovery but i cant Flash a ROM ,Actaully the ROM gets Flashed but never works...
I was havin so much fun with this n now.....
please some 1 help me....please.... I Want Froyo on my hero plssss
Also the nandroid is giving me errors.
Click to expand...
Click to collapse
Try To Put A Different ROM On Your SdCard or Nandroid Back To The Original!!
Sent from my HERO200 using XDA App
djkoolk said:
My Hero Is Now Stuck AT The NOW Of The Sprint Animation.
I was trying to Put the latest 651.2 ROM On My Hero.
It Already Had NFX 651.7 And I was updating it to stock.
Now I S-OFF N FROM THAT SCREEN i was able to Load RUU .5
root it , install recovery and everything.
but when i flash a new rom it jus wont work.....
it would just stuck at Sprint ANimation @ NOW.... HTC Quietly Brillant then again NOW... only this happens n then i remove battery and switch off and ask you peole for help
I able to HBOOT Also I Can Enter Recovery but i cant Flash a ROM ,Actaully the ROM gets Flashed but never works...
I was havin so much fun with this n now.....
please some 1 help me....please.... I Want Froyo on my hero plssss
Also the nandroid is giving me errors.
Click to expand...
Click to collapse
It's Not Bricked!!
That Happens To Me All The Time,
Try Wiping Cache, & Dalvik Cache
About 3-4 Times!!
If That Doesn't Work This Definitely Will.... Flash A Different Kernel, I'm Not Sure What Network Your On But Try One Of Deca's Kernels....
Maybe #16, #43, or DecaFuct #589!!
Hope This Helps, If Not Pm Me!!
Sent from my HERO200 using XDA App
OK I will try this and get back to you
djkoolk said:
OK I will try this and get back to you
Click to expand...
Click to collapse
Ok, Just Hit Me Up If You Need More Help.... But You Should Be Good!! Either Way Lemme Know!!
Sent from my HERO200 using XDA App
Had the same problem a long long time ago. Might wanna try to go into settings and format your sd card threw your phone. Then format threw recovery. Don't forget to back up all your data, because it will erase it. Hope it helps good luck.
Root-Hack-Mod-Always™
laie1472 said:
Had the same problem a long long time ago. Might wanna try to go into settings and format your sd card threw your phone. Then format threw recovery. Don't forget to back up all your data, because it will erase it. Hope it helps good luck.
Root-Hack-Mod-Always™
Click to expand...
Click to collapse
this is the only thing that is left...
will try dis tomorrow help me god
djkoolk said:
My Hero Is Now Stuck AT The NOW Of The Sprint Animation.
I was trying to Put the latest 651.2 ROM On My Hero.
It Already Had NFX 651.7 And I was updating it to stock.
Now I S-OFF N FROM THAT SCREEN i was able to Load RUU .5
root it , install recovery and everything.
but when i flash a new rom it jus wont work.....
it would just stuck at Sprint ANimation @ NOW.... HTC Quietly Brillant then again NOW... only this happens n then i remove battery and switch off and ask you peole for help
I able to HBOOT Also I Can Enter Recovery but i cant Flash a ROM ,Actaully the ROM gets Flashed but never works...
I was havin so much fun with this n now.....
please some 1 help me....please.... I Want Froyo on my hero plssss
Also the nandroid is giving me errors.
Click to expand...
Click to collapse
Try This: Download one of Deca's kernels either #589, or #43!
Try to install either one, my phone was doing the Same Exact thing, then I Wiped Both....
Cache/DalvikCache/Reboot-Recovery/
Then Flash Kernel, wait & hopefully
You'll be Good!
Sent from my HERO200 using XDA App
PMGRANDS said:
Try This: Download one of Deca's kernels either #589, or #43!
Try to install either one, my phone was doing the Same Exact thing, then I Wiped Both....
Cache/DalvikCache/Reboot-Recovery/
Then Flash Kernel, wait & hopefully
You'll be Good!
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
I will try this n revert currently busy in my sisters marriage..will try on 27th
Hi,
I am running FroyoMod, and i installed ROM manager. Through there i clicked 'flash ClockworkMod Recovery' and now i cannot enter into recovery at all.... the worst thing is that my phone cannot connect to wifi connection and i cannot go into recovery to clean Dalvik cache in order to test it if this sloves my problem.
Any suggestions?
Sent from my NOOKcolor using Tapatalk
Fekish said:
Hi,
I am running FroyoMod, and i installed ROM manager. Through there i clicked 'flash ClockworkMod Recovery' and now i cannot enter into recovery at all.... the worst thing is that my phone cannot connect to wifi connection and i cannot go into recovery to clean Dalvik cache in order to test it if this sloves my problem.
Any suggestions?
Sent from my NOOKcolor using Tapatalk
Click to expand...
Click to collapse
ROM Manager and CWM do NOT work on Milestone.. Even though it does say it works, it doesn't. OpenRecovery and any mod of it is the only thing that works.
Right now, you have a semi-brick. You need to reflash a stock SBF for your country (to get 3G/data) and then restart the rooting process with the VR, installing OR, etc.
http://and-developers.com/sbf:milestone221
There should really be a sticky for this. It wouldn't be too hard, and should be read by all before they flash a new ROM or ask this question
Oh god! Thanks...
So after 1,5 years i would have to start from scratch! :-(
At least i am not using 3g and at least i can use it as a phone...
Sent from my NOOKcolor using Tapatalk
Regardless, any custom ROM is better than stock 2.2.1, so I would say it's worth the effort to re-root and flash another custom ROM.
skadude66 said:
Regardless, any custom ROM is better than stock 2.2.1, so I would say it's worth the effort to re-root and flash another custom ROM.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1237473
Can someone help me?
i run my country's SBF through RSD, but i am stuck on the "android" logo at the start of the phone.
Anyway i can go past this?
The phone might be 100% bricked now?
OK Solved - had to find a non service SBF....
By the way almost all the links for the sbf's are not valid anymore! It would be a nightmare for someone trying to find old SBF's now...
Fekish said:
OK Solved - had to find a non service SBF....
By the way almost all the links for the sbf's are not valid anymore! It would be a nightmare for someone trying to find old SBF's now...
Click to expand...
Click to collapse
Gotta make sure you download them now I guess Thanks for reminding me, I might do that now
I'm having a problem installing CM 7.1 and all the speed/memory tweaks. Ive used MANY different roms with alot of tweaks but this one i driving me crazy. Im trying to install CM 7.1 in CWR 2.5.0.7 with the following tweaks...Firerats 1.5.9 auto patcher and KERN 2.6.35.14-10sept-v1 .....the problem is that i can not get it to boot!!!! if i dont install firerats the rom doesnt boot and goes back to CWR...if i do install firerats the screen just hangs on the htc logo...but without the tweaks CM7.1 boots fine
Please help!!
I did the following with success (this is from memory, hopefully I don't miss anything), I'm using firerats 1.5.8. I did not use a single fr patcher.
First, I flashed the firerats REMOVE zip, just to make sure I was really starting over. then flashed the latest CWM unofficial recovery...5.0.2.6.
rebooted to recovery after each step above though, and repeated wipe data/factory reset, wipe cache.
for firerats, had the mdpartmap settings at 125, 20 (just being extra cautious there, I'm seeing some lower numbers bandied about).
Anyway, from the pretty blue recovery screen, I then flashed fr-recovery, (I think it tells you to reboot to recovery again when done, possibly wiping again, anyway, it tells you) then flashed cm 7.1, gapps, kernal, and finally, fr-boot.
Seems I've heard of folks having some difficulty if they don't use a newer recovery, perhaps others can chime in on this.
After some initial settling in and reboots (it was a little hot at first, a few things were a little flakey), everything seems to be running great. I've only had it on here a few days, and I have not tweaked any performance settings, but so far, gps has been rock solid (isn't this ALWAYS a sticky point for some?) and runkeeper has stopped being so crash happy. Need to see how these things behave with age. A clean installation fixes a lot of things for awhile.
Okay, fired up gps status app, and boom, reboot. But like I said, haven't tweaked any performance settings, left everything at defaults. Will tinker eventually.
wow!!! thank you so much for the very fast reply. I am at work at the minute but i am going to try this ASAP!! Thanks again.
I will keep you informed as to how this worked out. Looks like it should work though
Ok thats awesome!! i got it all to work but i can not get android market to work. I just get FC everytime.
Is there a fix for this?
verybigleen said:
Ok thats awesome!! i got it all to work but i can not get android market to work. I just get FC everytime.
Is there a fix for this?
Click to expand...
Click to collapse
Hmm, not sure, did you use the gapps from the OP for CM7.1? Could try redownloading that and flashing it again.
also, what were your firerat settings in the partmap file? Just checking, in case you didn't use mine, which were generous, as I said.
That rather larger second number in the partmap file resolves a lot of market issues, I never have to apply any "market fixes"
My fault. I used 125 2 in the mtd instead of 125 20....worked great!!! now i can use the market...thank you so much!!! just have ooooooonnnneeeeee other small problem.
Now by busybox wont work. Keep saying no root access when obviously i do...and also i can not fix permissions in rom manager..theres always a problem eh.
Hope you can help...you've been great so far!!! got loads more internal space now
Hrm...I have to admit to never using busybox, at least not directly, I usually just install it if asked when I install/update Titanium Backup (after checking the allow unknown sources in applications settings). Are you trying to execute busybox from terminal or something? Apologies if you tried this but if you have Titanium (you should if you don't), then do this:
Go to titanium backup, go to problems then it will install busybox
I just cut and pasted that from ... somewhere.
verybigleen said:
My fault. I used 125 2 in the mtd instead of 125 20....worked great!!! now i can use the market...thank you so much!!! just have ooooooonnnneeeeee other small problem.
Now by busybox wont work. Keep saying no root access when obviously i do...and also i can not fix permissions in rom manager..theres always a problem eh.
Hope you can help...you've been great so far!!! got loads more internal space now
Click to expand...
Click to collapse
So I finally figured it out. I downloaded the cm nightly instead of stable and everything worked great.
Thank you so much for your help!!!
Sent from my HERO200 using XDA App
Just wanted to say. Just installed the new cm nightly and the new jaybobs kernal ....amazing...the new kernal is super fast and every body should use it! Its the Oct 22 build..I'm flying now
Sent from my HERO200 using XDA App
I've been using TWRP ever since I have rooted mt ONE. Over the last few days its been crashing while trying to install any zips at all.I can do a nandroid restore but nothing else. When I try to install any file it just goes to a black screen and reboots the phone.
Any ideas of what could be causing this and how to repair it also.
Thanks
I've also just replaced TWRP with clockwork mod touch and that is doing the same thing. I am now at a stage where I cannot install anything via the recovery method.
What is my bet options for starting afresh as my phone is unlocked with HTC dev and rooted also.
I'd like to go back to the beginning and start again.
Thanks
potsykate said:
I've also just replaced TWRP with clockwork mod touch and that is doing the same thing. I am now at a stage where I cannot install anything via the recovery method.
What is my bet options for starting afresh as my phone is unlocked with HTC dev and rooted also.
I'd like to go back to the beginning and start again.
Thanks
Click to expand...
Click to collapse
This seems to becoming a more and more recurrent event, though I cannot say for what the correct solution is, check these two threads:
http://forum.xda-developers.com/showthread.php?t=2435499
http://forum.xda-developers.com/showthread.php?t=2423817
one of them had to fix a corrupt partition, the other just reflashed and wiped again and again, and it worked.
If something works out for you do share!!
Thanks for that,I'll redownload my favourite Rom and try again without trying to update the Kernel,everything was fine as I remember before I tried the kernel update.
I'll let you know how I get on in a while.
potsykate said:
Thanks for that,I'll redownload my favourite Rom and try again without trying to update the Kernel,everything was fine as I remember before I tried the kernel update.
I'll let you know how I get on in a while.
Click to expand...
Click to collapse
Though the reasons are still unclear (at least to me ), it seems that flashing a custom kernel while still in recovery immediately after the ROM does work. Of course, make sure you're flashing a compatible kernel to the ROM; the version numbers of the custom kernels do not correspond to the ROM versions, and I've seen some that flashed an incompatible kernel, just because the version numbers looked similar.
Good luck & keep us posted
PS: If you do solve it, please update the main thread title to include [SOLVED]. thanks
Thanks for the two links,after reading them and doing a fresh install off my rom. Wiping cache,delvick and data I seem to be able to install zips again from recovery without the black screen and reboots.
Yep, so far all the zips that failed earlier are now installing.
A BIG THANK YOU :good::good:
potsykate said:
Thanks for the two links,after reading them and doing a fresh install off my rom. Wiping cache,delvick and data I seem to be able to install zips again from recovery without the black screen and reboots.
Yep, so far all the zips that failed earlier are now installing.
A BIG THANK YOU :good::good:
Click to expand...
Click to collapse
Excellent
Edit the main thread title to include [SOLVED] so that others can refer to it :victory: