Database Develop

[q] no base band after flashing

Hello every body,
I have a little big problem, i flashed my samsung galaxy S with I900XWJM5 from samsung firmwares.com
And after flashing my phone loose his BASE BAND so i can not call anymore, i inserted my simcard but the phone don't detect it.
I checked phone information and discovered that BASE BAND VERSION was " unknown " !!!
I tried to flash back to original firmware the I9000JF3 but same thing. I tried to flash only the MODEM part but still samething.
I called samsung technical and they told me to check in ODIN the case " Re partition " and flash again. But in Odin when i cheked the case " repartion" the flash hangs on " don't plug off target "
I tried to flash with a new computer under win xp, but same thing i can not do " repartion " with Odin
My mobile is not simlocked when i bought it, is my phone network dead ? PLEASE CAN SOMEONE HELP ME ?

Did you try updating the firmware through Kites? Also, try flashing it again with ODIN, after selecting all the 3 files - modem, code and csc.

You need to try with "Re-partition." until it works.
Also make sure you are using a 512.pit file.

and do not forget to take ur battery off and put it back before you try to run ODIN...

vinivius said:
and do not forget to take ur battery off and put it back before you try to run ODIN...
Click to expand...
Click to collapse
You would have to do that to remove the SIM anyway.
Make sure you remove SIM and SDCARD.

sturmeh said:
You would have to do that to remove the SIM anyway.
Make sure you remove SIM and SDCARD.
Click to expand...
Click to collapse
Unrelated, but what is the reason for needing to remove the simcard (I have never done so)

Thank you every body for your help
befor this problem i use to flash with Odin 3 firmwares and had no problem.
But now i can not tick the case " Re partition " to solve the problem. I called samsung technical service and they told me to do a full " Re partition " and flash again.
The problem now is that i can't do repartition, because the flash hangs at " don't take off target" and nothing happen.
may be the phone had serious problem with memory, i had to sent back to samsung after service .
Thank you all

I have the same problem. I have flashed many times with different firmware versions, but it didn't work. My phone couldn't attach network, I couldn't see neither IMEI nor Baseband version.

try just flashing the modem file until it works
the modem file is what controls the radios

andrewluecke said:
Unrelated, but what is the reason for needing to remove the simcard (I have never done so)
Click to expand...
Click to collapse
During the flash it may take the SIM as part of the hardware and ignore it once it's done flashing.
You'll have to reflash without the SIM to get it to work again.
It's not a real issue, but if you are failing with Odin I highly recommend sticking to those recommendations.

Also remove all usb devices other then phone, mouse and keyboard. Had heaps of flashing problems due to external hhds sucking power while flashing. Now works 90% of time for me. Next thing you do is find a xp box and try again.
Sent from my Apple Newton 2100

sturmeh said:
During the flash it may take the SIM as part of the hardware and ignore it once it's done flashing.
You'll have to reflash without the SIM to get it to work again.
It's not a real issue, but if you are failing with Odin I highly recommend sticking to those recommendations.
Click to expand...
Click to collapse
I've got the same problem. I am able to get JM8/JM4 (Kernel 2.6.29 [email protected] #2), and then whenever I try to go Froyo (JPM or JP6) I always end up with baseband unknown I did remove the sdcard and sim card - still the same thing, is there any solution to that thing ?

csc unknown??

I had loads of problems installing jpu and basically had to give up on using odin . I eventualy got it installed bit by bit and its working fine. My only problem is the Csc shows as unknown, will this cause any problems or do i not need to worry .

do you still have a network signal? if yes, then csc unknow should not really be an issue and more of a nagging annoyance of you seeing it as "unknown".
you can get your CSC back though BUT this will do a factory reset of your phone meaning all the apps you have installed will be removed so please back them up first.
all the necessary details you need are in the first few pages of this thread:
http://forum.xda-developers.com/showthread.php?t=787163
The automatic method will work for you. I am on JPU as well and it worked on me

Yea I have a signal and the phone is the best its been since buying it. The more I think about the trouble I had putting jpu onto the phone I'm just going to leave it until the next MAJOR update is available.
Thanks for the reply.

[Q] Only one soft / Signal without sim card

Hi forum
I have a very unusual problem with SGS. Well, from the beginning.
My mobile operator, has given me the SGS (with Android 2.2).
So I decided to upgrade to version 2.2.1, possibly Cyanomod / draky's. I plugged the phone to the PC and step by step according to the tutorial:
- downloaded Odin3 1.7
- pitting 512
- Keis with drivers
- And of course the latest 2.2.1 I9000XWJS3
Fleshed this soft thanks odin. Telephone, everything installed, Odin wrote "PASS" and there was a reboot. There was a samsung logo and then black screen and light vibration from time to time. Zero response.
I learned about the "Recovery Mode " did reset the cache, etc. Reboot ... NOTHING. So stweirdziłem that you need to return to the previous firmware ... Now all my flash's finished in the same way: a black screen and a slight vibration.
I tried reaaaaly a lot of versions and nothing. I tried it once cyanonmod, darky's mod. And nothing. Somewhere on this forum, I found versions: Froyo (2.2) That does not bricks. Worked.
But, this is the ONLY version that can be installed and running.
But it is not so big problem. The problem arises when I put the SIM card. Phone lying on the table (in a place where I always had coverage in other phones) to lose coverage. To one or zero bars. Neither I can not get anywhere else, nor to call me you can not reach you.
But when I stretch out my SIM card, coverage remains. At least in the form of dashes. Of course, nowhere is this possible calling, but the phone displays one or sometimes four lines.
My question:
Could this be the fault of soft? What should I do if I can not change it? Return to factory settings is not possible because they get a black screen and a slight vibration. I have tried:
- changing soft to 2.2.1
- 3 button recovery
- flashed with the kernel
- w8 for over an hour! to give SGS time to install everything right
- reupdating soft for hundreds ways
- read all FAQs on forums...
I didn't "root"
althou I tried to ":update.zip" in recovery mode but it gives only new errors.
Anyone have any idea? Or I am doomed for Samsung service?
thx

And how about getting back to factory soft. I mean, the soft that come to me with the new phone?
Or these soft has been overwritten by the all flashe's I tried to install, and is unbeckupable?
maybe this will solve the signal problem?

swiechu said:
And how about getting back to factory soft. I mean, the soft that come to me with the new phone?
Not unless you saved it .
Or these soft has been overwritten by the all flashe's I tried to install, and is unbeckupable?
But off course .
http://forum.xda-developers.com/showthread.php?t=818556
Flash via Odin to Eclair then update to 2.2 via Kies and you should get original as the download .
jje
Click to expand...
Click to collapse

thx, I will try it tooday

JJEgan said:
swiechu said:
And how about getting back to factory soft. I mean, the soft that come to me with the new phone?
Not unless you saved it .
Or these soft has been overwritten by the all flashe's I tried to install, and is unbeckupable?
But off course .
http://forum.xda-developers.com/showthread.php?t=818556
Flash via Odin to Eclair then update to 2.2 via Kies and you should get original as the download .
jje
Click to expand...
Click to collapse
I downgrade to 2.1-upadate1 (I9000XXJM4). Still no signal with SIM card. But when I try to upgrade to 2.2 via Kies 2.0 and didn't have info about possible upgrade to 2.2. So I downloaded old version of Kies (1.5.1) and try to again with regedit tweek and now I get information: "This software verios you cannot update"
Tryied "Test mode ON" "Test mode OFF", still nothing....
Click to expand...
Click to collapse

You will have to continue and flash the stock rom 2,2,1 as per the posted link .
Sim card have you checked it works on another phone .
jje

Yes SIM card is working perfectly on another iphone 3gs and nokia c5-00.
Now I don't have time to do all these steps, but tomorrow I will contact my operator to service it or maybe change to new one.
And do you think the signal problem might be the soft foulty? I think it is somenthink more...
And thank you for all the help.

Samsung I9000 doesnt recognize sim card

Hi everybody.
I got this weird problem with my cellphone. I have an international I9000. after factory reset my phone doesnt recognize sim anymore. I tried it with other sims too but my efforts were not successful. I tried flashing with other roms but again nothing happened. what am I supposed to do now? have you ever had the same problem?

Manual setting of network details or a new sim .
jje

Hi I had the same problem with my I9000 might be a different cause but its worth a try. Iv had it in tje past with other phones so I apolagise if I start abit basic but I dont know how tech savy you are not to nention we all sometimes overlook the basics.
first the basics. if you havnt already done any of there.
clean your sim, wipe the contacts clean then use a dry cloth or tissue and ensire it is dry. while the sim is out take a look at the sim slot check the pins are in the correct position so they are streght and not too far inside the housins to contact the sim properly.
if all is clean and good and it still dosnt work i would reccomend testing your sim in anothere phone even if locked most phones will at least say 'sim rejected' , 'wrong sim' or something along the lines also if possible test another sim in your I9000.
Now the gritty bit if your sim workes it is most likely 1 of 2 things soft wear or hardwear which is why I asked to check the pins above if it is hardwear and the pins look ok I cant help but bellow it a solution to softwear caused problems. in my case the cause was a corrupt modem file it can also be caused by a mismatch between the modem,csc and PDA files you can check your file versions *#1234# i cant tell you which pda goes with which modem but im sure it can bd found.
solutions to softwear issues. the easy way is to use kies if you rom is can be updated or if you can trick kies into updating. the other more risky way is to use ODIN I down loaded a stock XXJPO with seperat csc modem and pit then used kies to update to XXJPY but it wotked again as soon as ODIN flashed the XXJPO.
In short use ODIN to reflash a rom ensure you use the full 3/4 file method there are only 2 differand pit files but use correct MODEM, CSC and PDA i found myne in the genral section

shazk21 said:
Hi I had the same problem with my I9000 might be a different cause but its worth a try. Iv had it in tje past with other phones so I apolagise if I start abit basic but I dont know how tech savy you are not to nention we all sometimes overlook the basics.
first the basics. if you havnt already done any of there.
clean your sim, wipe the contacts clean then use a dry cloth or tissue and ensire it is dry. while the sim is out take a look at the sim slot check the pins are in the correct position so they are streght and not too far inside the housins to contact the sim properly.
if all is clean and good and it still dosnt work i would reccomend testing your sim in anothere phone even if locked most phones will at least say 'sim rejected' , 'wrong sim' or something along the lines also if possible test another sim in your I9000.
Now the gritty bit if your sim workes it is most likely 1 of 2 things soft wear or hardwear which is why I asked to check the pins above if it is hardwear and the pins look ok I cant help but bellow it a solution to softwear caused problems. in my case the cause was a corrupt modem file it can also be caused by a mismatch between the modem,csc and PDA files you can check your file versions *#1234# i cant tell you which pda goes with which modem but im sure it can bd found.
solutions to softwear issues. the easy way is to use kies if you rom is can be updated or if you can trick kies into updating. the other more risky way is to use ODIN I down loaded a stock XXJPO with seperat csc modem and pit then used kies to update to XXJPY but it wotked again as soon as ODIN flashed the XXJPO.
In short use ODIN to reflash a rom ensure you use the full 3/4 file method there are only 2 differand pit files but use correct MODEM, CSC and PDA i found myne in the genral section
Click to expand...
Click to collapse
thanks for ur explanations dude. I did everything like flashing cleaning the sim .... but it isnt working. someone told me to falsh it with an original rom! I dont know what he meant by original rom but I flashed it wit stock xxjpu but still I cant get a network or signal. I am so desperate

hoomanm said:
thanks for ur explanations dude. I did everything like flashing cleaning the sim .... but it isnt working. someone told me to falsh it with an original rom! I dont know what he meant by original rom but I flashed it wit stock xxjpu but still I cant get a network or signal. I am so desperate
Click to expand...
Click to collapse
What about your emei?
Sent from my GT-I9000 using Tapatalk

it is not shown

hoomanm said:
it is not shown
Click to expand...
Click to collapse
Do you have a backup of your efs folder? If yes so place in the right folder and restart your phone. If not you're lost. Sorry.

tingen said:
Do you have a backup of your efs folder? If yes so place in the right folder and restart your phone. If not you're lost. Sorry.
Click to expand...
Click to collapse
you mean that there's not a way to fix it without backup?

hoomanm said:
you mean that there's not a way to fix it without backup?
Click to expand...
Click to collapse
The efs folder is containing your emei and there is no way to reconstruct it. But there is a thread about here on xda. Try to find it, because i know some has been lucky.
Sent from my GT-I9000 using Tapatalk

DID YOU TRY manual network settings thats always the first step .
Failing that kill it go back to basics .
Block 2 Odin method to Eclair and test before upgrading .
http://forum.xda-developers.com/showthread.php?t=818556
jje

JJEgan said:
DID YOU TRY manual network settings thats always the first step .
Failing that kill it go back to basics .
Block 2 Odin method to Eclair and test before upgrading .
http://forum.xda-developers.com/showthread.php?t=818556
jje
Click to expand...
Click to collapse
Hey mate
what do u mean by block 2 odin eclair? do u mean that I should flash eclair on it?

You have to read the post .
Its not hard its on page one .
jje

Sim not reconigzed i9000 kitkat 4.4 cyanogenmod 11
shazk21 said:
Hi I had the same problem with my I9000 might be a different cause but its worth a try. Iv had it in tje past with other phones so I apolagise if I start abit basic but I dont know how tech savy you are not to nention we all sometimes overlook the basics.
first the basics. if you havnt already done any of there.
clean your sim, wipe the contacts clean then use a dry cloth or tissue and ensire it is dry. while the sim is out take a look at the sim slot check the pins are in the correct position so they are streght and not too far inside the housins to contact the sim properly.
if all is clean and good and it still dosnt work i would reccomend testing your sim in anothere phone even if locked most phones will at least say 'sim rejected' , 'wrong sim' or something along the lines also if possible test another sim in your I9000.
Now the gritty bit if your sim workes it is most likely 1 of 2 things soft wear or hardwear which is why I asked to check the pins above if it is hardwear and the pins look ok I cant help but bellow it a solution to softwear caused problems. in my case the cause was a corrupt modem file it can also be caused by a mismatch between the modem,csc and PDA files you can check your file versions *#1234# i cant tell you which pda goes with which modem but im sure it can bd found.
solutions to softwear issues. the easy way is to use kies if you rom is can be updated or if you can trick kies into updating. the other more risky way is to use ODIN I down loaded a stock XXJPO with seperat csc modem and pit then used kies to update to XXJPY but it wotked again as soon as ODIN flashed the XXJPO.
In short use ODIN to reflash a rom ensure you use the full 3/4 file method there are only 2 differand pit files but use correct MODEM, CSC and PDA i found myne in the genral section
Click to expand...
Click to collapse
==============================
Hi I got a i9000 and went from Froyo to Kitkat and now SIM NOT RECONGIZED have tried two different sim cards.
I have put all my phone details on photobucket
scince i am a newbie and cant post links please visit my album http :// s1227.photobucket.com/user/giibboo/library/I9000
.....im just guessing theres no pda modem info so if someone could direct me to the correct fix and files etc to use would be greatly appreciated. Thankyou

[Q] 3g not woriking after installing a cutom rom.

So, I recently installed CM9 and on top of that SlimBean 2.6. Both worked otherwise perfectly, but I couldn't get my 3g connetion to work on either one, unless I turned "National Roaming" on. I checked the Acces Point Name settings, and they seem to be fine. I can't find my service provider on the Network operators list though. I read that a new modem migth do the trick, but I have no idea if that will help or which modem to choose.

I had a similar problem after going to CM9. I even had my APN (access point names) settings disappear randomly also.
Solution for me was to turn 'airplane mode' on....wait 30 seconds then turn off.
Strange as it sounds but it actually worked for me. But in the end, (after 1 day) I changed to samsungized 12.1 JB rom because I found that I had to use that airplane mode on/off alot and was too much of a pain.
Hope this helps.
If not, I'd revert back to a stock rom then upgrade to a stable JB rom

Tried just that, but no luck so far. Any other suggestions?

Taatero said:
Tried just that, but no luck so far. Any other suggestions?
Click to expand...
Click to collapse
Id recommend trying a good stable stock rom with a 512_pit repartition via Odin, just to see it it improves the modem or not.
The rom im going to suggest has a replacement Modem file within.
Might sort the problem.
Ive used this stock rom to fix my many problems ive had after custom roms.( Mainly format errors i had )
Its from 'HotFile' site and took me around 20 mins to download it.
But it might be worth the wait in your case.
Rom File:
http://hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html
Here Is the Pit File and Odin version I used. ( 3rd box down the page )
http://forum.xda-developers.com/showthread.php?t=1102881
And heres the Root file. Get " CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS " :
http://forum.xda-developers.com/showpost.php?p=15188469
s1_odin_20100512.pit Goes in PIT ( repartition checked )
CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 Goes in PDA
GT-I9000-CSC-MULTI-OXAJVU.tar.md5 Goes in CSC
MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 Goes in phone
Sorry if im telling you what you already know with how to use Odin, just making sure.
After rom install pop this root on with Odin via download mode.
CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS goes in PDA
I reckon its worth a shot.
Must make sure the 3 wipes are done before the rom install. I learned this the hard way and messed my
phone up for a while.

Problem solved! I did some googling around, and found a solution. Apparently my carrier, Saunalahti, is known for having problems with 3g on custom roms. I found out that a nexus s modem by the name of i9020AUCKF1 might work. And sure enough, it did the trick! No more roaming! Anyway, thanks for taking the time to help me!