I've decided to make my ClockWidget skins available to all HTC sense users thus making them available here in the Android Themes section since these are not ROM dependent
These only will work on Sense ROMs that have been deodexed.
Before installing anything be sure to backup your current ROM in case you don't like the clock or just want to switch back.
Now that the important stuff is taken care of, here's the clocks:
as far as i can tell, this is the biggest collection of clocks available on XDA for HTC Sense devices, not only are they not monochrome, they are of the highest quality and bring some color to your home screen. I was tired of having the same boring clock so i started making my own, especially after finding not that many clocks i actually liked.
I hope you enjoy them as much as I do.
=============================================================
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See attachments below for download
==============================================================================
Tron clock collection here
Choose which update.zip you want to use by unzipping the downloaded file to a folder of your choice, select which color you want to use and voila, use that file to install via ClockModRecovery.
==================================================================================
Thread currently under development, *currently being edited*
Please bear with me until its finished.
All of these clocks have been made with the Droid Incredible in mind but work on other devices as long as they have the HTC clock widget for Sense 1.5.
Tron Collection Here
Choose which update.zip you want to use by unzipping the downloaded file to a folder of your choice, select which color you want to use and voila, use that file to install via ClockModRecovery.
post reserved, (might need two more)
and one more, just incase
thanks for sharing, great job man
Very Nice...
How do i install?
let me say i like the look you have created but i wouldn't have a clue how to install these clocks at all if you could give me a step by step tutorial would be awesome and i'll donate to your cause
griffo2010 said:
let me say i like the look you have created but i wouldn't have a clue how to install these clocks at all if you could give me a step by step tutorial would be awesome and i'll donate to your cause
Click to expand...
Click to collapse
If your Rooted, you should have ClockMod Recovery installed
move the .zip's you want to install to your sd card's root before proceeding further!
there are 3 ways to get to Recovery: (this is the method for using .zip files to install themes that are set up as an update.zip)
1. ROM Manager - "Reboot into Recovery"
2. ADB command in SDK - "adb reboot recovery"
3. holding down the volume down and power button on the phone, then it will load the H-Boot screen, once there use the volume down button to move to "Recovery" hit the power button to select the option, once there you should see a black screen with green text that shows recovery options you have.
After you make it to recovery, choose:
"Install Zip from SD-Card"
(you can either use the Optical Trackball to select the options or the volume keys (up and down)
to select the option, press the Optical Trackball's button once you highlight the correct option.
Then choose: "Choose zip from sdcard"
it will load all the contents of your SD Card on the screen
again, use the trackball or volume keys to select the file you want to install, once highlighted, hit the trackball button.
As a precaution, the devs that made ClockMod Recovery also implemented a security incase you selected the wrong option, so you will see only one option in the next screen that says "YES" and a ton of "NO"
once selected you should see it install, after its done installing, it will take you back to the main recovery menu, once there, choose "Reboot System Now"
-------------------------------------------------------------------------------------
Easiest method: ROM Manager
1. Open ROM manager, choose "Install ROM from SD card"
2. Choose the file you want to install (if it gives you an error, its because the file name has spaces in it, to fix this, rename the file so its either "filename_here" instead of "filename here" (**filename here is only an example, do not rename it to this**)
3. Once ROM manager lets you select the file to install, it will load a popup, do NOT check any of these options unless you want to make a backup, do NOT choose WIPE DATA and CACHE, this will format the ROM causing all your saved passwords, settings, apps to be all erased.
4. Click Ok, and the phone will reboot into recovery, auto install that file, then reboot automatically back to the OS.
Note: Some of my files (before i started to use ROM manager) weren't named with this app in mind as an installation method, so file names like "NCX StockSilver Blue" would have to be renamed to NCX_StockSilver_Blue, the simplest method is to replace spaces with _ or -
if this helps anyone, please be sure to give your thanks and don't forget, i gladly accept donations to keep my work moving forward, especially when the Thunderbolt comes out and is rooted.
Awesome. Thx
Sent from my ADR6300 using XDA App
Can these be used on a 2.2 rom?
Thanks
Man, I am loving the tron blue style as well as many of the other styles. I use a stock HTC Evo. Can these only be used with a rooted Evo? I would love to be able to use these with mine without rooting. If that is so, is there anything out there like this for non rooted phones?
Than you.
Phienyx said:
Man, I am loving the tron blue style as well as many of the other styles. I use a stock HTC Evo. Can these only be used with a rooted Evo? I would love to be able to use these with mine without rooting. If that is so, is there anything out there like this for non rooted phones?
Than you.
Click to expand...
Click to collapse
To answer your question, the framework on the Droid Incredible and EVO 4G are not compatible with each other as far as mods goes.
But Its not entirely hard to port it over to be used on the EVO 4G, its a matter of when I have the time to do it.
NCX Designs said:
To answer your question, the framework on the Droid Incredible and EVO 4G are not compatible with each other as far as mods goes.
But Its not entirely hard to port it over to be used on the EVO 4G, its a matter of when I have the time to do it.
Click to expand...
Click to collapse
I guess that is not entirely bad news. Ill be looking forward to something like that.
How do you expect me to choose!?!?! Great job man!
having trouble with the install on the clocks
hey dude, I've been following the steps on how to install the tron clocks. I install from recovery and it says installation complete but when I reboot my phone the clock didn't work! any suggestions? I'm running Eternity Rom by Virus
Related
[THEME] Vanilla Lockscreen NON-Transparent Background
This has been discussed on other threads. It's simple to remove or delete the HtcLockScreen.apk to revert to the stock lock screen. The problem with most ROMs is that the stock lock screen has a transparent background and a clock. Most people do not like this because it clashes with the home screen clock. In addition, the HTC alarms do not work with the stock lockscreen.
I found a glitch in EE 2.0.1 that allowed a background and allowed you to set it with MetaMorph. I discovered after loading EE 3.0, it too had a transparent background when reverting to the stock lock screen. I did not like this at all so I set off on a mission to try and duplicate the glitch. I am happy to say I have found a solution!
EDIT: I have uploaded the new MM patch for this mod. This easy to use theme works on all ROMs (except Cyanogen based ROMs where this is not needed). The previous issue with Ivan's Official has been resolved. Fuzzy letters have been reported with the Aloysius ROMs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions:
1. Do a NAND backup first!!! I am not responsible for anything that may happen to your phone.
2. Download LockWallpaper.zip
3. If you like, change the wallpaper in the zip to your own
----- LockWallpaper.zip\framework-res\res\drawable-mdpi\create_contact.png
----- Must be a 320x480 PNG file named "create_contact.png" (all lowercase)
4. Push the zip file to your sdcard
5. Open MetaMorph and apply the theme.
Changing the wallpaper via MetaMorph:
1. Update the background in the theme by pushing a new create_contact.png file into the zip. (The file name MUST remain the same)
2. If you unzip and then re-zip make sure you do not use compression
3. Copy it back to your sd card
4. Install the theme from within MetaMorph
----- Use the 'Unzip/Extract new theme' option and tell MM to replace all the files
----- Apply the theme
5. It will more than likely reboot your phone when it is finished
6. Rinse and repeat
Thanks to jcase for the idea of removing the HTC lock screen apk file
Thanks to csstikman89 for the original lockscreen script
Thanks to everyone who tested this
Reserved for future ....
first try unsucessful
It Works!!! I almost was going to say it didn't but just had to be patient about 1 minute longer
I ran the batch file.. it went into reboot.. comes up on skateboard guys.. and then black screen.. i waited about 2 minutes and figured something was wrong. Pulled battery, powered on and skateboard guys again to black screen.. figured something was still wrong and i'd have to restore backup.. then all the sudden the phone woke up and bam! background on the lockscreen.
Just be a lil patient when it reboots.
Thanks again!
Yes, I was watching the logcat and noticed it seems to rebuild the cache on reboot. It only happens with the first script though. That does not happen when you use Metamorph to change the wallpaper.
Just tried this on XTRRom 2.0 and it worked perfectly. Thank you so much for this.
Semi-n00b here. Can't get this to work...what am I doing wrong? I am following the instructions in the op and decided I liked the wallpaper that's already included so I didn't add any additional files to the wallpaper folder. When I double-click on the START-SCRIPT.bat file I get a windows pop-up that says "Windows cannot find './Tools/adb'. Make sure you typed the file name correctly, and then try again. To search for a file, click the Start button, and then click Search."
What am I doing wrong? The phone is not currently active on Verizon's network as I'm testing a LG Ally...could that have anything to do with it? I really want a new lockscreen!!!
Any help appreciated.
NVM: not sure what I did but I redownloaded/extracted the zip folder and now it's working.
Well...I'm still doing something wrong because the wallpaper didn't change. After I executed the file and it rebooted the phone it came up with the correct lockscreen but the background is like, buttons or something. Not the "dots" from the photo. I tried adding my own .jpg to the wallpaper folders and executing it again. No luck. Tried deleting the .jpg that was there in case it was causing a conflict and still no luck. So...I've got the lockscreen but an ugly wallpaper.
KacieB said:
Well...I'm still doing something wrong because the wallpaper didn't change. After I executed the file and it rebooted the phone it came up with the correct lockscreen but the background is like, buttons or something. Not the "dots" from the photo. I tried adding my own .jpg to the wallpaper folders and executing it again. No luck. Tried deleting the .jpg that was there in case it was causing a conflict and still no luck. So...I've got the lockscreen but an ugly wallpaper.
Click to expand...
Click to collapse
It sounds like your wallpaper did not get loaded. Try the Metamorph theme. It should fix your problem.
ihtfp69 said:
It sounds like your wallpaper did not get loaded. Try the Metamorph theme. It should fix your problem.
Click to expand...
Click to collapse
Tried the Metamorph theme, first it made me download AndExplorer - a separate program...when I click on the EE.zip folder using AndExplorer thru MetaMorph I get an error that says: "theme control file missing."
If I don't add a wallpaper to the extracted files the lockscreen should show up with the "dot" theme like the screenshot above, correct? When I browse out to the wallpaper folder that is the file that's already there. Not sure why I would be getting the "button" theme. So confused...
KacieB said:
Tried the Metamorph theme, first it made me download AndExplorer - a separate program...when I click on the EE.zip folder using AndExplorer thru MetaMorph I get an error that says: "theme control file missing."
Click to expand...
Click to collapse
Download Metamorph 1.9.8.6 from the Market. You are using an old version. Also, do not rename the zip file.
ihtfp69 said:
Download Metamorph 1.9.8.6 from the Market. You are using an old version. Also, do not rename the zip file.
Click to expand...
Click to collapse
Beautiful! That worked. Thanks for your help - much appreciated.
Great, I'm glad.
I am trying to apply the metamorph theme on my phone and it seems like it is taking forever. How long should it take?
Re: [THEME] Vanilla Lockscreen NON-Transparent Background [06/04/2010]
Not that long. It should reboot or ask you to reboot itself. Try tapping the home key to see if your phone is responding. If your phone is locked, send it a rebootcommand.
-------------------------------------
Sent from my Evil Eris
2 questions...
1. Does this show a preview of text messages on the lock screen itself? i like that feature on the default lock screen but i like the look of this new one.
2. Would i be able to do this with a macbook? thats the only computer i have...
Will this work by simply flashing the zip file?
I'm not very good with the commands
Running lastest Sense-able w/ADW Launcher. Ran the script, phone rebooted and came back up into FC loop. Didn't read them all but at least one of them had to do w/ADW. Does this not work w/ADW? Restored from NAND.
Re: [THEME] Vanilla Lockscreen NON-Transparent Background [06/04/2010]
This is not a flashable zip. It's pretty simple, though. Just unzip the first script, keep the included background or replace with your own and execute the included .bat file. No need to understand or type commands.
Then to change the background in the future, use the metamorph theme.
Sorry, I have no way of making this for a Mac. There is a Linux version of the script if that would help.
-------------------------------------
Sent from my Evil Eris
Re: [THEME] Vanilla Lockscreen NON-Transparent Background [06/04/2010]
Running lastest Sense-able w/ADW Launcher. Ran the script, phone rebooted and came back up into FC loop. Didn't read them all but at least one of them had to do w/ADW. Does this not work w/ADW? Restored from NAND.
Click to expand...
Click to collapse
I am running ADW as well. The problem is with your ROM. This won't work on everyone's ROM. Can you pull your framework-res.apk file and send it to me?
I will try and modify the xml to work for you.
-------------------------------------
Sent from my Evil Eris
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After asking around, I determined there was some interest in a simple, mostly-stock ROM based on the official HTC Sense/Froyo v3.26.605.1 release with only essential changes made; so I decided to go ahead and create one.
ROM Details:
Based entirely off the off the the official HTC Sense/Froyo v3.26.605.1 release (pulled from signed RUU); which is being rolled out by Verizon via OTA as the final build.
Moved some stock applications to /data/app, so they can easily be removed. To be clear, these apps remain enabled but can now be optionally removed using any Android uninstaller, rather than having to do it manually. This includes: App Sharing, Adobe Flashplayer, Car Panel, Flashlight, GenieWidget, PDFViewer, Quickoffice, Teeter, My Verizon, 3G Hotspot and YouTube.
All apps placed in /data/app by the ROM will be automatically restored after a date wipe or factory reset (a special feature of this ROM). These apps can be freely uninstalled via Settings->Applications or the uninstaller of your choice. Note: They will return when the ROM is re-installed or upgraded.
Disabled applications which the majority seems to agree are bloat, unneeded or can installed from the Market. This includes: Amazon MP3, City ID, HTC Footprints/Widget, VZ Navigator, Skype. If you decide you would like to use any of these apps, the APKs are available in the "system/virtuous" directory.
Numerous customization options via ROM Manager, such as Virtuous' EZ-Customizer which allows removal of more stock apps without the use of adb or shell, status bar mods provided by pmf, Incredible Revolution theme and more.
Automatic Virtuous OTA upgrade notification and installation via ROM Manager.
Minor theme modifications to remove GPS locator icon in the status bar and add transparency to the notification pull down menu. Thanks to pardonmyfreedom (aka pmf) and aiccucs for doing the work.
Added the Busybox installer application to allow upgrades as they become available. When running the installer, make sure to select /system/xbin as the destination.
Updated Adobe Flash to the official release provided to N1 users via the Market.
Updated Google Search and Google Voice Search to the latest Market versions.
Updated Gmail 2.2.1. The default ROM includes 2.2, so this is a minor upgrade to the latest version available.
Audio fixes to correct slow playback ("devil voices") of Flash videos on certain sites.
Removed startup "Drooooooid" sound. It was annoying.
Added the bash shell for those who work in adb or ssh into their phones. Just run "bash" to use it (it is not the default shell for compatibility reasons).
Removed cdrom.iso to avoid being prompted to install Verzion/HTC hardware when the device is connected via USB.
Installation:
You must be rooted, have nand unlocked and be running a 2.x radio. Follow dadicus' guide for details on how to perform these steps.
Perform a nandroid backup of your current ROM, in case you change your mind or encounter issues.
If you are coming from another completely stock ROM (i.e. Sense 2.1 or 2.2), you may not have to wipe data. I obviously recommend wiping data (since it will eliminate any possibly bad/stale configuration), but the update script will not do so automatically during installation. Use your best judgement to determine what works best for you.
Wipes are NOT required for any upgrade to/from any 2.x version of the ROM; downgrades are a different story.
Apply the zip via Clockwork Recovery. It has not been tested with any other recovery.
Expect the first boot to take anywhere from 6-10 minutes. Subsequent reboots should be significantly quicker.
Disclaimer
As with any modification (ROM, patch, etc), you run the risk of damaging your device. While unlikely, it is important to consider this possibility before proceeding. I take no responsibility for any such damage, data loss or otherwise.
Download ROM Here
(Changelog)
Hboot Upgrade Instructions
As of Virtuous 3.2.0, hboot 0.92 is now required. This hboot shipped with the original Froyo OTA for the Incredible.
Download this file and place it at root of your sdcard.
Boot into the bootloader. There are several ways to do this. If you are already booted into Android, use Quickboot and select the Bootloader option. You can also use adb by typing "adb reboot bootloader". Or, simply power down the device. Once it is off, hold the volume down button and then press power.
Once in the bootloader, select the first option from the menu "bootloader". You should see a progress bar on the right side of the screen. If you do not, you did not perform step #1 correctly or your sdcard is not formatted FAT32.
You will then be prompted to confirm flashing boot, bootloader and recovery. Hit volume up to confirm and then reboot.
At this point hboot is upgraded. I recommend reinstalling Virtuous (either via ROM Manager or manually) just to be safe.
Frequently Asked Questions
Visit the FAQ section of our website.
Recommended Extras
[Theme] INCredble REVOlution (SoCalMiles)
[MOD] Rotary Lock Screen w/ Music Controls for Sense (ihtfp69)
[MOD] Remove Status Bar Icons (Loc/Battery/Clock/Alarm) (pmf)
[MOD] Sexy Rosie (brucekey)
Special Thanks
Several folks have been helping with the ROM and I would like to acknowledge them all here in no particular order.
Unrevoked Team - For enabling customization to begin with.
ihtfp69 - Numerous tips on how to fix bugs. Check out his SkyRaider ROMs (Sense / Vanilla)
Adrynalyne -Custom Kernel, ROM collaboration and testing.
pardonmyfreedom - Location icon modification.
brucekey - Suggestions and testing.
Berzerker - Suggestions, testing and comedic relief.
Donations
Truth is I do this work because I enjoy it and it is a hobby. I am just pleased that people find what I am providing to be of value.
That being said, several folks have asked me about how to donate. If you would like to buy me a beer and help with hosting hosts, I've put up a link. No obligations whatsoever; you can also contribute by sticking around on this this thread and helping others work through any issues they encounter.
Thanks for trying my ROM!
Sweet thx man
Pics of rom please ?
Sent from my ADR6300 using XDA App
IIDIncII said:
Pics of rom please ?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Lol its the stock leak.
Add Footprints?
Thanks for this rom! I want to install footprints. I've tried with root explorer r/w on and off as well as astro. I've put the files in sytem/app, tried from disabled folder and even the sd card. It always goes through the install process correctley but always ends with
"application not installed". Any suggestions? Thanks
s-off
Thank you very much for this rom!
This looks great. I'm mildly sure this is sort of what jdkeclipse was trying to accomplish. This is how the OP is done well and done right. Thanks rmk40
You should just throw some screenshots in there regardless of the fact that it's a stock rom.
kentoe said:
This looks great. I'm mildly sure this is sort of what jdkeclipse was trying to accomplish. This is how the OP is done well and done right. Thanks rmk40
You should just throw some screenshots in there regardless of the fact that it's a stock rom.
Click to expand...
Click to collapse
you will be surprised what my next release will bring.....
and good to rmk for this rom!
Sent from my ADR6300 using XDA App
Thanks for writing a proper write-up/install guide; I am going to actually make the leap I've been avoiding for so long and try this one out =).
thom2k said:
Thanks for this rom! I want to install footprints. I've tried with root explorer r/w on and off as well as astro. I've put the files in sytem/app, tried from disabled folder and even the sd card. It always goes through the install process correctley but always ends with
"application not installed". Any suggestions? Thanks
s-off
Click to expand...
Click to collapse
you will probably have to push it through recovery with adb. I have noticed that if I use root explorer to add things to system/app they usually will not work for some reason, and the only way it will is through recovery or if I make a small flashable zip file.
Thank you! The app works but the widget does not?
Rmk, you just released it and a newer leak showed up today. Are you by chance going to mod the new one as well with your touches?
Haha, this awesome. Right after u get done with the work A new leak is released. Regardless this is very much appreciated.
Sent from my ADR6300 using XDA App
thom2k said:
Thanks for this rom! I want to install footprints. I've tried with root explorer r/w on and off as well as astro. I've put the files in sytem/app, tried from disabled folder and even the sd card. It always goes through the install process correctley but always ends with
"application not installed". Any suggestions? Thanks
s-off
Click to expand...
Click to collapse
Since that's an HTC app, you'll need to do that via recovery. Boot into recovery, adb shell, mount /system and go ahead and copy/move the files.
tats_06 said:
Rmk, you just released it and a newer leak showed up today. Are you by chance going to mod the new one as well with your touches?
Click to expand...
Click to collapse
I just saw it. Yes, that's definitely the plan.
We need to get it deodexed, figure out which bugs are present in the new leak, etc. As soon as I have something I feel confident works well, I'll go ahead and put it up.
thom2k said:
Thank you! The app works but the widget does not?
Click to expand...
Click to collapse
you will need to do the same thing with the footprintswidget apk.
Updated to base on today's 3.21.605.1 OTA.
Got home to a pleasant surprise! Got 2.0 flashed, and got a quadrant score of ~1300. Flashed KiNgxKernel BFS #1 and jumped my quadrant up to ~1600 running at 1113mhz. Also got solid 36s in linpack.
Ty for throwing this together. Was exactly what I was looking for! Even down to the boot animation sound. Gotta figure out how to change the boot animation still... kinda new to this.
Anyway, solid work. Keep us posted if anything new shows up.
Is bump charging still needed or does the phone finally charge properly?
Pulled this straight out of the motorola xoom system dump (that is now gone from xda it seems) and sized for our screens. Works great on my screen. Drop the bootanimation.zip into /system/media or /data/local and it should work on any 800x480 screen. Use the honeycomb-boot.zip to flash with CWM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Updated: I've also added a themed Pandora designed to be a bit darker (will try and figure out the now playing screen to make it fully black) and fit in with a honeycomb theme if you have one. Be sure to uninstall the old one before attempting to install this one.
+1
Quite nice.
Kaik541 said:
Pulled this straight out of the motorola xoom system dump (that is now gone from xda it seems) and sized for our screens. Works great on my screen. Drop it into /system/media or /data/local and it should work on any 800x480 screen.
http://dl.dropbox.com/u/10640272/bootanimation.zip
edit: added a CWM flashable zip... *should* work, haven't test
Click to expand...
Click to collapse
DAMN!!!! that is HOT!!
going to try the CWM zip now & will let ya know how it works out.
thanks!
& i'm also an organ donor! rock on!
Just flashed the zip. Works.
RobertInCypress said:
going to try the CWM zip now & will let ya know how it works out.
thanks!
& i'm also an organ donor! rock on!
Click to expand...
Click to collapse
let me know if it works. I don't see why it shouldn't, but sometimes things are just finnicky
Seems like the images need to be rotated 90 degrees, or is it just me?
I rotated the images, looks better now.
peachpuff said:
Seems like the images need to be rotated 90 degrees, or is it just me?
I rotated the images, looks better now.
Click to expand...
Click to collapse
I actually specifically chose not to do this even though the images are in "portrait" orientation because it more matches how it would look on the xoom (since you're more likely to hold that in portrait mode, I feel).
With yours it looks like it's falling from right to left, mine/xoom is top to bottom. Thanks for the alternative but all it does is make me want to turn my phone into portrait mode when booting
The image just seemed squished on my end, anyhoo choice is always good.
CWM zip works great, thanks!
I suddenly find myself rebooting my phone for no reason... o.0
That is one cool ass boot ani...
peachpuff said:
Seems like the images need to be rotated 90 degrees, or is it just me?
I rotated the images, looks better now.
Click to expand...
Click to collapse
Your .zip file does not work. It freezes up for me as soon as I click Yes-Install ....
RaptorOne3 said:
Your .zip file does not work. It freezes up for me as soon as I click Yes-Install ....
Click to expand...
Click to collapse
His isn't an update.zip, it's the bootanimation.zip that you copy into /system/media.
Sent from my Captivate.
"Homer Simpson Doh!" lol
Hmm... After adding it in there and flashing it to the phone... I actually prefer the alternative with the image rotated.
It does appear to be going at an angle from left to right but I still think it's just as pimp as the original and it looks a bit more uniform and not so stretched...
Either way, me likey! Thanks brotha!
Could you advise a rookie? Do I need a custom ROM for this, or can I change it on the STOCK ROM?
I Am rooted and through Linda Manager can see System/Media and bootsamsung.qmg and bootsamsungloop.qmg
advice?
Thanks
You'll want to use an application called ROM Manager. (tis the easiest way)
It can be downloaded from the Market. Search for it, download it...
Since you're device is rooted you will not have to do that part but ROM Manager requires root access so you're good to go there.
Next step is to open up the ROM Manager app.
Tap "FLASH CLOCKWORK MOD RECOVERY"...
Tap "Allow" when superuser prompts...
Next you will want to make sure you have placed the Honeycomb-Boot.zip on your device via USB Mass Media mode. Copy/Paste it right into the device drive.
Release/Eject the device from Windows.
Turn off USB Storage access on your device.
Disconnect the USB cable.
Now open up ROM Manager again.
Tap on "Reboot into Recovery"...
Once the device reboots, if you find yourself at a screen that is in BLUE text (Recovery), you must use the Volume Down key to navigate to "Reinstall Packages", click the power button to select. You may have to do this once or twice. But once it works your device will reboot into a screen with GREEN text (ClockWorkMod).
Once you are in CWM, use the Volume keys to navigate to "Install .zip from SD card"... You will have to kind of navigate around and find where you placed the Honeycomb-Boot.zip file.
Navigate past the crazy amount of No's and click Yes - Install...
Navigate with the volume buttons to "Go Back"...
Navigate to "Reboot" the device...
That should do it.
dozyaustin said:
Could you advise a rookie? Do I need a custom ROM for this, or can I change it on the STOCK ROM?
I Am rooted and through Linda Manager can see System/Media and bootsamsung.qmg and bootsamsungloop.qmg
advice?
Thanks
Click to expand...
Click to collapse
you will need a custom ROM (or at least kernel) that supports AOSP bootanimation.zip format. by default, the samsung kernels play the above bootsamsung.qmg and bootsamsungloop.qmg, but almost any available custom kernel will support the bootanimation.zip support.
All it needs is sound. Something to do with pulsating energy.
So I tried this and it didnt work. I get an error saying:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
Any suggestions?
That's what I get when I flash from CW sometimes, but it still takes for me. Did you try rebooting and seeing if it was actually there?
Now included in my unity theme, available here: http://forum.xda-developers.com/showthread.php?p=12057423
Hey guys, just starting some to theme some system apps for an upcoming project of mine (unityMOD, basically trying to bring some unity, in this case dark blacks, to the OS to match the hardware etc) and I thought some people might like to see my Camera.apk theme.
I always found the weird grey and black speckled background weird, so I changed it to black and changed a few buttons, outlines etc. I think it looks quite nice personally, so I thought I'd just share it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation has been tried, and works perfectly, via adb push:
Code:
adb push Camera.apk /system/app/Camera.apk
OK, here's the update.zip's. I have tested the CM7Camera.zip (I use CM7 obviously) but haven't had time to test the other one, so if anyone could just let me know how it goes, that would be appreciated.
Place the required .zip file (CM7 or Stock/Axura) on your SD Card storage
Boot into CWM Recovery
Use volume buttons to select 'install zip from sdcard' and power to select
Use volume and power to select 'choose zip from sdcard'
Find the .zip file you placed earlier
Using volume and power, select 'Yes - Install xxx.zip'
Reboot, and you're done!
Downloads
[CM7]
Camera.apk
CM7Camera.zip
[Stock/Axura/MoDaCo - thanks Master]
CameraGoogle.apk
StockAxuraCameraGoogle.zip
Master™ has made a white version of this, available here
Notes
[CM7 Based ROMs] If you are having troubles actually seeing the changes after successfully applying Camera.apk, make sure you are using the System theme in Theme Chooser.
[General] If you are having issues, check and see if you are using the correct download version. Stock ROMs and Axura use CameraGoogle.apk and CM7 (possibly others?) use Camera.apk. I will try and make this irrelevant in my update.zip, but for now just take note.
I'm using Axura 1.1.2.0 and the camera app just FC's.
Probably because of the ROM.
I'll try tomorrow sometime when I load up CM7 or something.
Looks fantastic, though!
I love simple black on this phone. It is absolutely gorgeous.
Xandlinger said:
I'm using Axura 1.1.2.0 and the camera app just FC's.
Probably because of the ROM.
I'll try tomorrow sometime when I load up CM7 or something.
Looks fantastic, though!
I love simple black on this phone. It is absolutely gorgeous.
Click to expand...
Click to collapse
Thanks for the Axura mention, I haven't personally used it, so I don't know what Master has changed for it. Has he themed Camera.apk at all?
Thanks for that though, I also love the blacks on it! I just absolutely hated that grey speckled stuff!
Hope you get to use it soon somehow
Jonathon Grigg said:
Thanks for the Axura mention, I haven't personally used it, so I don't know what Master has changed for it. Has he themed Camera.apk at all?
Thanks for that though, I also love the blacks on it! I just absolutely hated that grey speckled stuff!
Hope you get to use it soon somehow
Click to expand...
Click to collapse
I do not believe that he has skinned it, but I could be wrong. I hate the stock camera app so I have only ever opened it once since launch, haha.
Much prefer Camera 360 or Vignette.
THANKS! looks very nice, CM should theme the camera.apk like this
Xandlinger said:
I do not believe that he has skinned it, but I could be wrong. I hate the stock camera app so I have only ever opened it once since launch, haha.
Much prefer Camera 360 or Vignette.
Click to expand...
Click to collapse
Yes, I did
P.s OP.. Looks great.
The attached one works on Axura
Thank you. It looks great!
Can I just delete the camera.apk and move this into it's place with root explorer?
SubyWill said:
Can I just delete the camera.apk and move this into it's place with root explorer?
Click to expand...
Click to collapse
I've never tried it personally, but you could test it for me if you want
If that doesn't work though don't worry, I have a copy of stock camera to restore if you need.
I can't see why not though, ill see if it works with root enabled ES in a minute.
Edit: ES doesn't seem to like performing operations from /system even with the root option, so just as a test, copy your current Camera.apk to somewhere safe, then delete the one in /system/app. If it lets you, then you should be right to just move my themed Camera.apk in its place.
Sent from my Nexus S
Jonathon Grigg said:
I've never tried it personally, but you could test it for me if you want
If that doesn't work though don't worry, I have a copy of stock camera to restore if you need.
I can't see why not though, ill see if it works with root enabled ES in a minute.
Edit: ES doesn't seem to like performing operations from /system even with the root option, so just as a test, copy your current Camera.apk to somewhere safe, then delete the one in /system/app. If it lets you, then you should be right to just move my themed Camera.apk in its place.
Sent from my Nexus S
Click to expand...
Click to collapse
No, it didn't work for me
I copied the stock camera app and moved it into my SD card. Then I deleted it and moved the themed camera app into it's place and rebooted. It wasn't appearing anywhere so I went back into it and tried to install it but it kept saying "application not installed" so idk what I can do now
I really want this modded camera app too! I can't adb push it either, I'm having a lot of problems installing the sdk and drivers
SubyWill said:
No, it didn't work for me
I copied the stock camera app and moved it into my SD card. Then I deleted it and moved the themed camera app into it's place and rebooted. It wasn't appearing anywhere so I went back into it and tried to install it but it kept saying "application not installed" so idk what I can do now
I really want this modded camera app too! I can't adb push it either, I'm having a lot of problems installing the sdk and drivers
Click to expand...
Click to collapse
If you have CWM recovery, I will try to make an update.zip which you can use. I'm just having a few issues with creating them right now, but I should have one by the end of today (my time it's only 7:30am for me).
That said, if anyone else wants to help by creating an update.zip, PM me and I'll add it to the OP.
Jonathon Grigg said:
If you have CWM recovery, I will try to make an update.zip which you can use. I'm just having a few issues with creating them right now, but I should have one by the end of today (my time it's only 7:30am for me).
That said, if anyone else wants to help by creating an update.zip, PM me and I'll add it to the OP.
Click to expand...
Click to collapse
A zip that I could flash would be awesome! If I could help, I would haha
use root explorer to install apk
1. get the XXX.apk to sdcard
2. open root explorer
3. find the XXX.apk you are wanting to install
4. long press the XXX.apk file and choose copy options (you will see the paste and cancel boxes at bottom of screen)
5. back out to system/app/XXX.apk and paste file
6. long press XXX.apk and change permissions.
These should be checked: (1)User/read, (2)Group/read, (3)Others/read and (4)User/Write
If you get this WARNING. You cannot paste here because the file is read-only. this is ok. Look to the top of screen and you will see line like this. 124.24 used, 379.70mb free r/o [Mount R/W]. Tap the [Mount R/W] colored box so it shows [Mount R/O]. Now try the the paste and the change permission process. When done reboot.
jerrycycle said:
1. get the XXX.apk to sdcard
2. open root explorer
3. find the XXX.apk you are wanting to install
4. long press the XXX.apk file and choose copy options (you will see the paste and cancel boxes at bottom of screen)
5. back out to system/app/XXX.apk and paste file
6. long press XXX.apk and change permissions.
These should be checked: (1)User, (2)Group, (3)Others and (4)Write
If you get this WARNING. You cannot paste here because the file is read-only. this is ok. Look to the top of screen and you will see line like this. 124.24 used, 379.70mb free r/o [Mount R/W]. Tap the [Mount R/W] colored box so it shows [Mount R/O]. Now try the the paste and the change permission process. When done reboot.
Click to expand...
Click to collapse
Which ones should be checked off?
To keep it simple. Check the permission of another app in the system/app files. The permissions are all the same.
jerrycycle said:
To keep it simple. Check the permission of another app in the system/app files. The permissions are all the same.
Click to expand...
Click to collapse
That didn't work for me either unfortunately
I used root explorer daily when I was flashing nightly builds and this is the way I install boot animations and framework.apk etc. It may be missing one step in the install precess.
I edited my post earlier for in hope the permissions checks are clearer to the readers.
I don't flash gapps anymore when on cm rom. I install the themed market, I like this, and go from there. I am confident in the process.
jerrycycle said:
I used root explorer daily when I was flashing nightly builds and this is the way I install boot animations and framework.apk etc. It may be missing one step in the install precess.
I edited my post earlier for in hope the permissions checks are clearer to the readers.
I don't flash gapps anymore when on cm rom. I install the themed market, I like this, and go from there. I am confident in the process.
Click to expand...
Click to collapse
I followed every step and the camera remains the same as before
@SubyWill
I use a camera apk that is totally blacked out. I just installed the op's camera apk. It installed. This one and the camera button, picture viewer and video images all have a greyed ring around them.
Can u please make it to where we can flash it?
Hello everyone. I just bought my phone 3 months ago, and i'm little tired of stock rom, because of some lag and bugs it have. So i decided to flash some CM7. Really don't know anything about flashing and rooting. Was reading some threads on this forum, but there's so many information that at the end decided to create my own thread. Hope someone will have a little bit of time and reply it.
My phone info: (it's not rooted, just stock version out of the box)
Model: LG-P990
Android version: 2.3.4
Baseband version: 1035.21_20110725 (what is that?)
Kernel version: 2.6.32.9
Build number: GRJ22
LGE Version: LGP990-V20a
1. So first of all i would like to make a backup, so if something went wrong i could recovery my phone. Maybe you could suggest some not very difficult tool for that.
2. What should i do next, wipe, root, flash, kernel rewrite? Maybe someone could link me or write how to do it step by step.
3. Which rom and kernel to use? What are difference between them (kernels and roms)? I prefer battery life > bugs > speed > customization.
P.s. I really don't know much about doing what i just wrote, please don't be mad Thank you for your help.
First of all you should root your device, this is generally the first thing to do. I believe I used super one click for this, here is a guide for doing so: http://androidadvices.com/how-to-root-lg-optimus-2x-p990-tutorial/ also there are some guides here around on xda where you will be able to follow a step by step tutorial for rooting
For easy backup I would recommend Titanium backup. Search for it on the market it will show up there furthermore you should always backup your phone through clockwork mod recovery. Clockwork mod is an app you install after rooting and you access recovery by flashing recovery and then booting into it. It is also from here you will be "flashing" your custom rom of choice
So in a step by step tutorial here's what to do:
1. Rooting
plenty of guides are found on this lg optimus 2x forum with links and guides as for how to root your phone. Afterwards you should check if it was done properly, you can do this with root checker simply download it from the market and check it
2. Downloading your custom rom:
Next step is to download your custom rom and throw it onto your phones SD-card.
You can choose anything you like but I would recommend the build in my sig link is here
now for kernels, you don't really need any :b you will be perfectly fine with whatever you already have here But if you do want to flash a custom kernel aswell it is virtually the same as flashing a custom rom
3. Make a backup of your phones apps and contacts:
Making backups is really easy, just download titanium backup from the market to backup your apps and backup your contacts through the phones built in adress book.
4. Boot your phone into recovery:
This is how it looks:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First of all, install rom manager this is an app found in the market just search for it and it will be there. Next use the app to flash clockworkmod recovery (yes thats the top button in the app :b). Then when this is done reboot into recovery. When here your phones screen will not be used to navigate, instead use your volume rockers to navigate and the power button to select.
When here you should make a nand-backup of your phone, this is basically a backup of everything on your phone and it can be used to restore your phone should anything go wrong here
This is somewhat like what your recovery would look like:
From here choose "backup/restore" and here choose backup. Now your phone will make a backup
Also before flashin you will have to choose both of the following options:
1. Wipe data/factory reset
2. Wipe cache
5. Flash your rom (and custom kernel):
Now, finally, you will see some improvements :b Still navigating ClockworkMod recovery choose install zip from sd card, then find your rom and choose it. Now the flashing begins and your phone will do this for some time, once done reboot your phone and you're done!
GL and HF, i hope this helped you
1. First you need to root your phone. Rooting your phone won't erase your data. Use this guide to root your phone: http://forum.xda-developers.com/showthread.php?t=953182
This method works flawlessly and is really easy!
After rooting, you can check if it worked, by looking for the Superuser app in your app drawer, or download the root checker app and check for yourself.
Also, after you rooted your phone, you need to install the following apps: Rom Manager and Titanium Backup. With Titanium Backup, you can backup all your apps and restore them. Consider buying this app, because it's really worth the extra money. Use any SMS/Contacts backup app to backup your contacts. (Don't forget to grant Titanium Backup Superuser access)
Afterwards, you open Rom Manager (again give this app also superuser access) and select the option flash recovery. Clockworkmod recovery mode is just a system which allows you to flash custom roms and kernels. Make sure you flash the O2X recovery and not the G2X, because you have a P990. Clockworkmod Recovery version 5.0.2.0 is good enough. You can enter recovery mode with ROM Manager or reboot into it. When your phone is off, you can boot into recovery manually by holding the power and volume down button until you see the second LG bootscreen with the blueish background.
2. First you need to download the following things and put them on your SD card:
- Any ROM (Cyanogenmod 7 or 9)
- Any kernel (Cyanogenmod Kernel for CM7 or CM9)
- Google Apps (for Gingerbread or Ice cream sandwich)
Afterwards, boot into recovery mode. You can navigate through the menus with the volume buttons and the power button. Also I would recommend you to make a backup of your current LG rom in recovery mode. (Backup/Restore - Backup - Yes) Keep this backup if you ever need to return your phone to stock in order to send it to LG.
In recovery mode choose the option:
- wipe data/factory reset
This option won't erase your root, only your current ROM and apps (but you should have made a backup by then)
After this is done, choose the option:
- wipe cache
This option is necessary in order to flash a rom
Then select the following option:
- install zip from sdcard
Browse through your sdcard and first install the rom. After this is done, install another zip and install the Google Apps package. This package includes the Android Market. Afterwards, you could install another zip, which is the kernel, but this is optional. Obviously you need to find the kernel zip and install it.
After installing all this you should be done and you should select reboot system. This will reboot your phone normally into the rom. Note that the first boot in a new rom always takes some time.
3 I would advise the combination in my signature. This combination is very smooth and fast.
Hope this helped!
Gosh this community is so helpful
Thank you so much!
No problem
I went ahead and pressed the thanks button for you, redh4t, but you can try it too
LarsPT said:
I went ahead and pressed the thanks button for you, redh4t, but you can try it too
Click to expand...
Click to collapse
You're a great guy, you know that?
Thanks
Thanks Guys!
...
Can I install a custom ROM without an SD card?
BuTuCuTz said:
Can I install a custom ROM without an SD card?
Click to expand...
Click to collapse
You can put the rom zip file on your internal SD card. (the one of 5.5 GB) And then access it with CWM. So, yeah it's possible.
SP1996AC said:
You're a great guy, you know that?
Click to expand...
Click to collapse
The thanks meter is a great motivator for people who like to help, so I like encouraging its use
Also... I'll probably be visiting Amsterdam (again) this summer, we should smoke one together if you're around
Adding files ICS
How can I add files to my phone while on ICS 4.0.4 (Nova HD)???
On stock gingerbread it worked but now i can't add any files. It shows internal storage and then no folders or files.
LarsPT said:
The thanks meter is a great motivator for people who like to help, so I like encouraging its use
Also... I'll probably be visiting Amsterdam (again) this summer, we should smoke one together if you're around
Click to expand...
Click to collapse
Haha sounds great!
One problem though, I'm kinda under age... and I don't think my parents, nor the Dutch government would allow me smoking...
Anyway, Amsterdam is a great place to visit, so smoke some, and have fun over there!
BuTuCuTz said:
How can I add files to my phone while on ICS 4.0.4 (Nova HD)???
On stock gingerbread it worked but now i can't add any files. It shows internal storage and then no folders or files.
Click to expand...
Click to collapse
Nope I don't think so, many people are having the same problem. What you can do is to put your sd-card in a card reader and add files through there. That's what I do anyways :b
EDIT::
Have you checked if you have the correct drivers installed? go check in the device manager and if it says that no drivers are installed (or no correct drivers, anyways) try and install them automatically. This worked for me
Umm, I'm quite new here, so I don't exactly know how it works, but shouldn't this thread (post #3 especially) be "Sticky"?
Cause when I started to root/flash my O2x this all-in-1 post could save me a lot of time.. There is quite everything you need when you know nothing about changing a rom. And if there is something missing, you know what you need to search for, right?
gasduster said:
Umm, I'm quite new here, so I don't exactly know how it works, but shouldn't this thread (post #3 especially) be "Sticky"?
Cause when I started to root/flash my O2x this all-in-1 post could save me a lot of time.. There is quite everything you need when you know nothing about changing a rom. And if there is something missing, you know what you need to search for, right?
Click to expand...
Click to collapse
Yes it should, but the truth is, this process is basically the same for every android phone out there, the only difference is the rom you choose really. I'm pretty sure there is an even more detailed guide somewhere out there
Thank you for help everyone, u helped me alot.
I just installed custom kernel/rom.
Rom: temasek's UNOFFICIAL BUILD RC1-85
Kernel: [CM7/MIUI Kernel][KANG][APR02] ETaNa with Spica (c) OTF ToolKit
When i installed all this, i missed Google Play and account sync, so i downloaded some "gapps-gb-20110828-signed.zip" and installed with Rom Manager. I don't know why, but google play crashes very very often. Maybe i did something wrong?
And how the hell should i select ringtone from my SDcard? Because when i click Phone Ring tone theres only some main ringtones and no "select from" options.
Oh and the last one, why the hell drawer is so lagy? Because of inscripted ADW? It's very anoying.
Thanks again.
SP1996AC said:
One problem though, I'm kinda under age... and I don't think my parents, nor the Dutch government would allow me smoking...
Click to expand...
Click to collapse
Heh, being kinda under age kinda sucks, but yeah, in fact it seems that there is a 4 day weekend coming up in May, I think I might take the opportunity to spend a day or two there
---------- Post added at 12:46 PM ---------- Previous post was at 12:43 PM ----------
redh4t said:
Thank you for help everyone, u helped me alot.
I just installed custom kernel/rom.
Rom: temasek's UNOFFICIAL BUILD RC1-85
Kernel: [CM7/MIUI Kernel][KANG][APR02] ETaNa with Spica (c) OTF ToolKit
When i installed all this, i missed Google Play and account sync, so i downloaded some "gapps-gb-20110828-signed.zip" and installed with Rom Manager. I don't know why, but google play crashes very very often. Maybe i did something wrong?
And how the hell should i select ringtone from my SDcard? Because when i click Phone Ring tone theres only some main ringtones and no "select from" options.
Oh and the last one, why the hell drawer is so lagy? Because of inscripted ADW? It's very anoying.
Thanks again.
Click to expand...
Click to collapse
You've done something wrong when flashing temasek's kang, I get google play immediately, don't need to flash gapps and it doesn't crash, I would do a full wipe and reflash if I were you.
To select ringtones you will have a folder in your sdcard media -> audio -> ringtones. You have to put the desired ringtones in that folder.
My drawer is also laggy. Just put the apps you use in your home screens and don't use it
Hope I helped! Cheers!
LarsPT said:
Heh, being kinda under age kinda sucks, but yeah, in fact it seems that there is a 4 day weekend coming up in May, I think I might take the opportunity to spend a day or two there
---------- Post added at 12:46 PM ---------- Previous post was at 12:43 PM ----------
You've done something wrong when flashing temasek's kang, I get google play immediately, don't need to flash gapps and it doesn't crash, I would do a full wipe and reflash if I were you.
To select ringtones you will have a folder in your sdcard media -> audio -> ringtones. You have to put the desired ringtones in that folder.
My drawer is also laggy. Just put the apps you use in your home screens and don't use it
Hope I helped! Cheers!
Click to expand...
Click to collapse
Hmmm theres no such a folder called media in my sdcard. And when i create it and move mp3 file to it it doesnt appear in ringtone selection. Do i need to restart my phone when i move ringtones to that folder?
When i was flashing new rom i did that. First i made a recovery, then wiped my phone, then clicked install zip from SD card and clicked my rom file. It said that flashing was successful. Then did the same for kernel. And finally rebooted my phone. Everything went well, phone turned on, no errors .. nothing. I installed latest version of that rom, i linked it before.
It seems google play not crashing anymore, i dont know why, but it works. I didnt do anything. Other problem appeared. When i installed GAPPS, Car Home app was installed. I removed it with Titanium Backup successfully. But sometimes in my bottom bar (where clock, battery and other stuff are), it appears. When i slide that bar down it says click to close Car Home. Its very anoying. I tried to look with root explorer for that app in my phone, no clue. How the hell should i remove it? Because i cant find it anywhere. Thanks