Database Develop

[REVIEWS] Screen Protectors

In an effort to clean up the old, very large review thread I have decided to start a new one.
Should this turn out to be a success, we can expand it to cover cases, etc....
Please be as descriptive and as creative as you can be, post pictures if you can.
But a few points to note before you all go wild with your reviews.
Please keep all reviews,
Factual
Helpful
Constructive
Impartial

Does the SPen scratch the Zagg Invisible Shield non HD / HD?
There's also a good option here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Protects the screen and back. Seems a good option since a case makes ur phone looks too big. (... lol ...)

So, all the old threads are deleted?

[Review] JLG Screen Protector
I LIKE
Feel:
It really is smooth. Smooth as hell. Sometimes, feels even smoother than the glass did. This is really great. It seems very hard, the stylus doesn't leave any marks on it and did I mention it is smooth? Finger beautifully glides across the screen and there is no hang ups. Felt better than the Belkin I was also installing.
Clarity
Since i still have haze, I don't want to completely comment on the final product, but i do have a few things to say:
I have installed lots of wet installs and even have my own little squeegee. Never have i had this much water stuck under the protector.
There was something on the bottom. Not sure if it was clumped glue, or what, but it was there. It wasn't dust, and it would not come off the bottom of the protector. It currently rests in the middle of a haze field so I'm not sure if it will go away, but I will update if/when it does.
NO ORANGE PEEL. On the Belkin, I could immediately see "orange peel" and with this one, none whatsoever. This is great!
As of right now, it looks like everything will be fine with the clarity, depending on the haze finally disappearing.
Fit
It fits well. A tinge smaller than i want it to be (and covers less than the Belkin i was installing) but it covers the view-able area and about another 2 millimeters on each side. It is cut to make room for the front sensors and the bottom button. Like i said, it will work but for me, I could've used maybe a LITTLE bit more screen coverage.
NO LIKE
Adhesion
The haze I can live with and understand, but the fact that it seems most of the edge has not stuck down completely is unsettling. It's really hard to show, but on most of the phone the edges aren't perfectly stuck, and in some areas it extends a millimeter or 2 into the protector.
It is SOOO hard to take a picture of this, but I am still trying.
The instructions say to keep pushing the edges for the next couple of days to make sure they stay down. I don't like this. at all.
I don't use a case, and feel like dust, dirt, loose hairs or whatever will get in there. On top of that, If I don't see the glue sticking immediately, I dont know how it will stick over the next couple of days.
Only time will tell... but that's how i feel right now.
On the topic of the edge:
The Edge
For some reason... there is a little like, lip there. It's hard to describe, but running your finger from the middle to the edge of the phone, it feels as if the protector is thicker or lifted on the edges. This is ALL THE WAY around the protector. Makes me feel it has to do with the way it is cut.
This actually is the part I dislike the most. I want my finger to not be able to notice the difference between the glass and the protector. On the Belkin I installed, it was a subtle step down from the Protector to the glass. You know its there, but your finger doesn't catch on it at all and it doesn't drag on the edge. With this one?
It absolutely does. You can feel the edge "biting" into your fingertip before dropping down to the glass. This not only makes you notice the protector more, but also makes me worry about the longevity of the protector, as if it can "snag" on my finger it can also snag on my pocket material and other things.
Now understand that I am talking about very minuscule amounts of biting and snagging, but they are there. I've never seen this on any SGP or the cheapo Belkin I was using.
EDIT: Seems I wasnt clear on my "lip" issue. I am posting from another reply I made:
On my previous [JLG] protector, the edge had a lip... maybe its better to describe it as a bead. It felt thicker than the rest of the protector... So instead of just having your finger slide off the protector to the glass, it actually got "caught" on this lip. It didnt feel very good, especially since it isnt cut very large you almost always feel it.
Other protectors do not have this lip or bead. Not one of them.
Final thoughts?
It is decent. I need to sit and wait to see how much the haze clears and the edges stick. It is clear, smooth as ****, and was priced just fine.
Personally, if knowing what i know now, was to purchase a protector... It wouldn't be this one. Id prob go back with the Ultra Crystal i normally use, and might switch to that if there are problems with this one.
That being said, I am not going to rip this off my phone and I cannot test the additional shatter protection that the film supposedly adds to the glass.
Take this how you may and feel free to ask questions or thank me. whatever.
I have since completed testing and posted a final review. It is post #9, and linked here.
Images
Here you can see the packaging. Pretty plain and not something I care much about, but some people seem to like fancy packaging that comes with other protectors.
Package includes the little wet application spray (never had an issue with wet applications), a little cloth (more on that) and a little piece of cardboard and some instructions.
I wanted to get a closer look at these, hoping you can see what I see. On the plastic itself, you can see some inconsistent lifting off the backing. This really isnt a big deal, but it can mean an issue with inconsistent glue/cutting.
Here is my GN2 clean and sitting on the bathroom counter waiting. You can see its pretty damn clean. I have installed MANY screen protectors and NEVER had an issue with dust under the protector.
So I installed the protector. No pics here because of multiple reason, but mostly because I only have 2 hands and the bathroom was REALLY steamy.
This is where I ran into a problem. The little sprayers that comes with the JLG is less than half the size of other wet install sprayers. After maybe 6 pumps, I had used it up completely. I used some to spray on my fingers, but I should have just washed them dry and then wet them with a bowl of water. I wanted to make sure that I had the same solution on my hands as the screen to minimize upsetting the glue, but no biggie. Be careful with the amount you spray and you should be fine. For me it was too little.
Ok, so now installed.
Below, you can clearly see the haze, wavyness and other odd things that appear with a typical wet install (though more than i remember others, but i wont hold JLG responsible for my bad memory).
I am hoping this goes away soon, as it should. It is almost completely impossible to see when the screen is on. Ill use the next post for my summary and how I feel about it.

I just installed a SGP Ultra Crystal and I'm in love. After using a JLG that popped up off the screen when it had an unknown pact with something in my sleep, I needed a replacement. I did have to pull the SGP up to take out 3 dust particles but now I have a 100% perfect install and it looks and feels amazing. Very clear and very slick. Not to mention the SGP comes with 2 protectors, I'm a very happy camper.
Sent from my GIANT internet thingy.

just like glass screen protector
installed the just like glass screen protector and so far i'm really liking it. the wet application really helps to reduce the bubbles as well as aiding in alignment. feels...just like glass.

I used JLG and there is smth that i didn't like about it. you'll never know whether you have dust or specks of whatever not until it is already too late to do anything about it. the biz owner do not recommend for users to peel of the screen protector to removed those specks of dust, but instead buy a new one from him at 50% off. so, i swapped to Tank Protection screen protector. as i couldn't stand the speck of dirt under the screen protector. usually i get lint under the protector but specks of squarish dust is too much. my first time trying a wet application type.
installation was a breeze with the tank protector, had it aligned right at one go. imho, i find it equally clear, equally smooth and much easy to get it right in one try. hence, it is also cheaper for somebody like me, who lives outside of the US.

Evermind10 said:
I used JLG and there is smth that i didn't like about it. you'll never know whether you have dust or specks of whatever not until it is already too late to do anything about it. the biz owner do not recommend for users to peel of the screen protector to removed those specks of dust, but instead buy a new one from him at 50% off. so, i swapped to Tank Protection screen protector. as i couldn't stand the speck of dirt under the screen protector. usually i get lint under the protector but specks of squarish dust is too much. my first time trying a wet application type.
installation was a breeze with the tank protector, had it aligned right at one go. imho, i find it equally clear, equally smooth and much easy to get it right in one try. hence, it is also cheaper for somebody like me, who lives outside of the US.
Click to expand...
Click to collapse
I was able to lift mine up to remove dust and then respray it so it would adhere again.. no problems so far... iirc, the instructions say that its not recommended but if you do, use tape to remove specks.
Sent from my Giant i317 Pocket Monster!

SGP Ultra Crystal
* Included in one box - 2 x screen protectors, 4 x anti-dust stickers (for picking up dust), 1 x microfibre cloth and 1 x serial number sticker (yes, I know).
* Application was easy, and fit is quite good, leaving around 1mm gap around the edges. Suitable for cases with lips (no overlap or lifting when using with Seidio Surface).
* Material itself is very smooth, and extremely clear. Basically looks and feels like factory. Extremely satisfied with the result, no distortion whatsoever. I've used dozens of screen protectors over the years on various phones, and this is the first time I've splurged over the no-name eBay brands (some of which had rainbow effects, scratched easily, or had terrible fitment).
* Cost around $15 off eBay for the pack of two.

rawdikrik said:
I understand why you wanted to get rid of some of the old threads...
But I posted 2 really huge, really informative objective screen protector reviews, and you just wiped those.
Is there any way you can just reinstate those threads and then maybe lock them or something?
I am here creating another one for the reallook line and dont want to spend another 2 hours writing up a review just to have the mods delete it
BTW: thank you for cleaning up what you did. I just dont think we should throw the baby out with the bathwater.
Click to expand...
Click to collapse
I thought your reviews were excellent. Do you have the text of them so you can post it up again?
Btw, I currently have a Just Like Glass on mine, but there was a dent or glob of glue or something in it (it's not a dust speck as it's not the right shape for that) right in the middle of the screen. I applied the JLG about 6 weeks ago and to be honest, that dent (and to a lesser extent, the rainbowing) have been annoying me ever since.
Just bought a pack of iSmooths this morning which I hope will be do the job. Under £10 delivered from the states to the UK. Not a bad deal for 3 protectors

The good reviews will be reinstated here. They have just been moved internally. Hopefully they will be back up today.

Cellet Screen Guard
I have been using the Cellet Screen Guard for about a week now, a brand I haven't seen anything about here before. I picked it up because it was the only one they carried at Fry's for the Note 2. It is the rigid film type. It went on very easily (I am usually no good at installing these), with no bubbles or any other problem. The packaging says "scratch resistance" and so far that has proven to be true. It is very clear, hard and smooth, and the spen does not leave any marks on it. The only problem is that it does smudge and pick up fingerprints easily, but they wipe right off with a microfiber cloth.

le_lutin said:
I thought your reviews were excellent. Do you have the text of them so you can post it up again?
Btw, I currently have a Just Like Glass on mine, but there was a dent or glob of glue or something in it (it's not a dust speck as it's not the right shape for that) right in the middle of the screen. I applied the JLG about 6 weeks ago and to be honest, that dent (and to a lesser extent, the rainbowing) have been annoying me ever since.
Just bought a pack of iSmooths this morning which I hope will be do the job. Under £10 delivered from the states to the UK. Not a bad deal for 3 protectors
Click to expand...
Click to collapse
Awww... thanks! I just really hoped my reviews helped someone choose what they wanted, even if it was something that I wasn't fond of.
I spoke to the mods and they are hoping to carry over the good reviews, so hopefully they will carry my reviews over and bring them to this thread.
I didnt save any of my review text from before (Lesson Learned) so I am really hoping the mods can bring my posts/threads back. I would at least like to copy them down somewhere else.
Ive changed the format of my reviews and should have a few more for this thread, along with 2 bumper and 2 case reviews.

You checked post #4?

I just got the iSmooth in the mail today after the nightmare known as JLG.
All I can say is Dayyyyyummmm!
It had everything I was looking for..
-great price
-swag included (excellent silk screen wipe)
-3 protectors!
-excellent cuts
-great adhesion
-ismooth is smooth... Both for fingers and Spen
-crystal clear
-easy install with directions with an offer for another free one with an Amazon review
-lifetime warranty, even if you mess up the install yourself
The install was so easy, so perfect, I felt like I was cheating
Not 1 bubble, or mark, or dust, or rainbow steaks (that will "dissappear" in 3-5 days like some companies claim... But 1/2 the time do not)
Not sure else what to say. Just an overall excellent experience.
+1 to iSmooth

andyharney said:
You checked post #4?
Click to expand...
Click to collapse
Thanks! Any chance you can add in the post I had in that thread with my final thoughts (post number 9) and also my ISmooth review?

Will do

le_lutin said:
Just bought a pack of iSmooths this morning which I hope will be do the job. Under £10 delivered from the states to the UK. Not a bad deal for 3 protectors
Click to expand...
Click to collapse
Where did you order from to get it delivered to the UK? Amazon.com won't deliver to my UK address from iSmooth

BoxWave Clear Touch Anti glare screen protector
I just got my BoxWave Clear Touch Anti glare screen protector and installed it. Note I have never installed a screen protector before but I have read the horror stories.
I decided to install one on my Note 2 because I wanted it to change the feel of writing on glass to make it more like paper.
My wife has installed several screen protectors and some were ok and some were murder to install. The BoxWave Clear Touch Anti glare screen protector was so easy to install and quite forgiving.
I cleaned the phone screen with my clear screen wipes I use for my laptop drying it with a micro fiber cloth. Then wiped it with the cloth they provided, but did not use their cleaning wipes (saved them for later). I started and had trouble getting it to stay aligned as I removed the backing (65 with shaking hands) so after getting about and inch and a half from the corner I took it off. Then got some tape and taped it in place in 2 spots. Then started removing the backing again. Real smooth.
When done I saw I had a couple pieces of dust under the screen protector so I tried to lift it with some tape. No way it was really stuck and the tape would just come off. So I tried with my fingernail and the corner came up. I just grabbed it with my thumb and finger (worried about contaminating the back) used some tape wrapped around my finger, to remove the dust. Put the corner back down used the cardboard they provided wrapped in the cloth they provided to push out the air bubbles and done.
It's not truly straight and one edge is too far to the side and may not stick well due to curve of the glass but so far it looks good and really helps with the feel of the pen. Quite pleased and because of the deal from slickdeals I have 2 more and only spent $3.00. Note it does not change the colors nor does it have any color bands at angles. I does reduce the brightness a tiny and I mean tiny bit.

FormeriPhoney said:
I just got the iSmooth in the mail today after the nightmare known as JLG.
All I can say is Dayyyyyummmm!
It had everything I was looking for..
-great price
-swag included (excellent silk screen wipe)
-3 protectors!
-excellent cuts
-great adhesion
-ismooth is smooth... Both for fingers and Spen
-crystal clear
-easy install with directions with an offer for another free one with an Amazon review
-lifetime warranty, even if you mess up the install yourself
The install was so easy, so perfect, I felt like I was cheating
Not 1 bubble, or mark, or dust, or rainbow steaks (that will "dissappear" in 3-5 days like some companies claim... But 1/2 the time do not)
Not sure else what to say. Just an overall excellent experience.
+1 to iSmooth
Click to expand...
Click to collapse
+more for iSmooth. As much as I dig their original screen protector currently being shipped from Amazon:
They are sampling a new ultra-clear anti-fingerprint one which should start shipping officially once the stock of "green" ones run out. I would like to point out the new "clear" one is:
- thicker (on par with 3H thickness of Spigen and MobC) and super strong
- ultra-clear, no color distortion, no tint
- no rainbow effect (even under fluorescent lights)
- no issues using s-pen even applying extra pressure
- an improved cut, especially around home button
- super smooth, feels like glass
- covers visible part of the screen, while living enough edge margin for any case lip
I'm attaching a few edge shots of the new protector. Keep in mind its thickness relative to the phone. The edges are rounded and very smooth. After testing half a dozen of other cheaper and brand new screen protectors, this one is a keeper for me!

The Importance of a Real (Tempered Glass) Screen Protector!

I use a tempered oleophobic glass screen protector on my Galaxy Note 2. Just yesterday, it saved my phone from a 1 m drop onto a tile floor. There is now a hairline crack in the protector, but that's much better than having a hairline crack in the Note 2's screen itself. It would've been the screen if it weren't for the protector!
If I had used a plastic film protector, it would have bee a different story. Those flimsy films only protect from scratches, which this tempered glass protector does a much better job at anyway.
These protectors only cost around $10 on eBay, so it's a worthy investment to prevent spending $300 to replace the whole screen assembly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Here's a link to the one I bought.
Disclaimer: Not actually bulletproof.
Note: You don't have to buy from this link if you don't want to - it posts from China, so it may take a very long time for most people. Try searching for a tempered glass screen protector locally first.

How is it installing this particular protector? And what effect does it have in regards to the s-pen?

+1
Just went ahead and ordered 1 from link in OP.
Installation steps/advice would be great please.
Sent from my SGH-I317M using xda app-developers app

+100 for Tempered Glass!!! Have my VITREO on and wouldn't leave a home without. We all focus on getting good cases to protect our phone, and some end up adding $0.99 thin film screen protector from ebay. Even good stuff from Spigen with 3H hardness will only protect from scratches. Impact protection is only reliable with a tempered glass. Furthermore, tempered glass usually is super clear, no light effects, not interference with s-pen, and it feels super smooth like a real glass.
@vantt1, how is it sticking to the edges? One of the biggest problems with Note 2 is display curve toward edges. Spigen didn't even bother making their signature Glass.t stuff for Note 2. MIME got it right only from a 2nd try. Other brands had issues with glass not sticking to the edges. Sedio VITREO shrunk the glass to cover only visible part of the display and not even going all the way around home button, all that to avoid with curved part of the Note 2 screen edge. So curious with the one you got if it's sticking to the edges or not? Or perhaps it's a bit thinner and thus more flexible in comparison to VITREO, so edges do stick better?

GMAN1722 said:
How is it installing this particular protector? And what effect does it have in regards to the s-pen?
Click to expand...
Click to collapse
Installation is relatively straightforward. Just make sure the screen you're applying it on is super clean and dust free, then peel the plastic film covering the silicone-based adhesive off and align the protector according to the location of the home button and the front camera. Don't worry if there's one or two specks of dust in between the protector, because it is near impossible to remove the dust again. Pushing it will make the silicone fill up pretty much all the remnant air bubbles caused by the dust, and will look nearly invisible anyway.
As to the S-Pen, it doesn't affect it at all. Hover and tapping works just fine, and because it is glass it doesn't scratch like the old matte ones I used to use.
Gucci.Nexus said:
+1
Just went ahead and ordered 1 from link in OP.
Installation steps/advice would be great please.
Sent from my SGH-I317M using xda app-developers app
Click to expand...
Click to collapse
Nice! See the above for installation tips.
vectron said:
+100 for Tempered Glass!!! Have my VITREO on and wouldn't leave a home without. We all focus on getting good cases to protect our phone, and some end up adding $0.99 thin film screen protector from ebay. Even good stuff from Spigen with 3H hardness will only protect from scratches. Impact protection is only reliable with a tempered glass. Furthermore, tempered glass usually is super clear, no light effects, not interference with s-pen, and it feels super smooth like a real glass.
@vantt1, how is it sticking to the edges? One of the biggest problems with Note 2 is display curve toward edges. Spigen didn't even bother making their signature Glass.t stuff for Note 2. MIME got it right only from a 2nd try. Other brands had issues with glass not sticking to the edges. Sedio VITREO shrunk the glass to cover only visible part of the display and not even going all the way around home button, all that to avoid with curved part of the Note 2 screen edge. So curious with the one you got if it's sticking to the edges or not? Or perhaps it's a bit thinner and thus more flexible in comparison to VITREO, so edges do stick better?
Click to expand...
Click to collapse
This 2.5D is by no means flexible, but the protector is smaller than the Note 2's screen by about 1-2 mm around the edges. It sticks reasonably well to the curved edges, but it is visibly not making complete contact. The protector clings perfectly where the actual AMOLED panel is though, and that's good enough for me. Furthermore, as you said, the glass does make seamless contact with the display, so there is no air gap at all and no extra reflections.
It's very smooth and hydro/oleophobic too!

Now this is the kinda thread I like seeing... Much better than one I've seen called " Don't use a screen protector!" which I hope dies in the depths of this forum
My tempered protector is the best 6 bucks I've ever spent on phone accessories and it's the first accessory I'll buy for all my future phones. I stop worryimg about what else is in my pocket. And because it's glass it's easy to forget that you're even using a screen protector unlike with the flimsy plastic films.
Sent from my SCH-I605 using Tapatalk

Okay, you guys sold me on this. I just purchased one from the OP's link

I bought one again myself as a replacement for my currently cracked one.

Just ditched my several week old zaggs invisishield, which proved to be a sticky, bubbly pos which ripped after just a few weeks of sitting in the pocket of my khakis (with nothing else in the pocket).
Received and installed a Seidio Vitreo which I learned about in vectron's thread. The Vitreo is outstanding but I wonder what makes it so much more expensive ($30+)...hardness maybe?
Sent from my SPH-L900 using Tapatalk

Braneless said:
Just ditched my several week old zaggs invisishield, which proved to be a sticky, bubbly pos which ripped after just a few weeks of sitting in the pocket of my khakis (with nothing else in the pocket).
Received and installed a Seidio Vitreo which I learned about in vectron's thread. The Vitreo is outstanding but I wonder what makes it so much more expensive ($30+)...hardness maybe?
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
...hardness maybe? No that's not why. I'd bet money it's no harder than the rest.
The only difference with Seidio is that it's not as wide and therefore it doesn't go as far to the edges. As you might have read in Vectron's review, if the screen protector goes too far to the edges the curved edges of the Note 2's screen will cause the protector to not stick as well.
The reason it's so much more expensive is because of the word Seidio printed on it's packaging and I guess a bit also for the fact that they solved a problem that no other protector solved at the time they released their product.
In my opinion Seidio products in general are overpriced, but hey we all live on different budgets
That being said I bought a $6 protector on eBay from a Chinese seller here and I couldn't be happier. I dont have the problem of it not sticking properly to the edges. It came in nice packaging with proper English instructions.
The edges are nicely tapered and the feel is great.
Plus the seller threw in an aluminium button sticker for free... I asked for one...haha
Sorry for all the lint..
Edges
Top
Bottom

Hälftebyte said:
...hardness maybe? No that's not why. I'd bet money it's no harder than the rest.
The only difference with Seidio is that it's not as wide and therefore it doesn't go as far to the edges. As you might have read in Vectron's review, if the screen protector goes too far to the edges the curved edges of the Note 2's screen will cause the protector to not stick as well.
The reason it's so much more expensive is because of the word Seidio printed on it's packaging and I guess a bit also for the fact that they solved a problem that no other protector solved at the time they released their product.
In my opinion Seidio products in general are overpriced, but hey we all live on different budgets
That being said I bought a $6 protector on eBay from a Chinese seller here and I couldn't be happier. I dont have the problem of it not sticking properly to the edges. It came in nice packaging with proper English instructions.
The edges are nicely tapered and the feel is great.
Plus the seller threw in an aluminium button sticker for free... I asked for one...haha
Sorry for all the lint..
Click to expand...
Click to collapse
Yours looks better on the top edge... the Seidio has an asymmetric cut around the earpiece. I'll keep that one in mind for my next phone or if the Vitreo breaks.
Sent from my SPH-L900 using Tapatalk

Hälftebyte said:
...
That being said I bought a $6 protector on eBay from a Chinese seller here and I couldn't be happier. I dont have the problem of it not sticking properly to the edges. It came in nice packaging with proper English instructions.
The edges are nicely tapered and the feel is great.
Plus the seller threw in an aluminium button sticker for free... I asked for one...haha
Click to expand...
Click to collapse
Just now ordered one from the seller you posted, hope the cut and fit is as good as yours' - will update as and when i receive the same, thanks for the heads up!

Hälftebyte said:
...hardness maybe? No that's not why. I'd bet money it's no harder than the rest.
The only difference with Seidio is that it's not as wide and therefore it doesn't go as far to the edges. As you might have read in Vectron's review, if the screen protector goes too far to the edges the curved edges of the Note 2's screen will cause the protector to not stick as well.
The reason it's so much more expensive is because of the word Seidio printed on it's packaging and I guess a bit also for the fact that they solved a problem that no other protector solved at the time they released their product.
In my opinion Seidio products in general are overpriced, but hey we all live on different budgets
That being said I bought a $6 protector on eBay from a Chinese seller here and I couldn't be happier. I dont have the problem of it not sticking properly to the edges. It came in nice packaging with proper English instructions.
The edges are nicely tapered and the feel is great.
Plus the seller threw in an aluminium button sticker for free... I asked for one...haha
Sorry for all the lint..
Edges
Top
Bottom
Click to expand...
Click to collapse
Although the curved edge problem exists on my protector, I haven't noticed any reduction in contact within the last 6 moths that I have been using it. Sure, a little bit of dust does get caught under it, but it doesn't seem to affect the protectors amount of contact at all.
Braneless said:
Yours looks better on the top edge... the Seidio has an asymmetric cut around the earpiece. I'll keep that one in mind for my next phone or if the Vitreo breaks.
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
My protector also has that extra bit of glass underneath the home button, which in my opinion goes well with my home button sticker.

puneet_si said:
Just now ordered one from the seller you posted, hope the cut and fit is as good as yours' - will update as and when i receive the same, thanks for the heads up!
Click to expand...
Click to collapse
Good stuff.. Hopefully it works well for you too
Sent from my SCH-I605 using Tapatalk

Damn, should've checked here before I got one on Amazon for twice the price. By the way if anyone's looking for some reliable instructions on applying them here's a nice guide I wrote as a review earlier:
1. I don't know about you but I'm a bit anal with my phone so that whole just "line it up as best as you can and drop it" stuff isn't good enough for me. I'm going to introduce to you the hinge method which will allow you perfect alignment. Lay your screen protector over your screen exactly where you want it to be placed. Don't remove any of the plastic coating just yet, you just want to line it up. Then, tape the bottom part of the screen protector down with two pieces of tape effectively making a hinge. When you go to apply it you will simply remove the backing and the screen will lay down perfectly where it needs to be but we'll get to that in a bit there is still a little more prep required.
2. You are going to need to clean your screen so you don't have any particles under it to cause bubbles this is probably obvious but I would be remiss not to include it. This kit includes a microfiber which for most installations should be just fine however if you feel you need a little extra cleaning help you can also try a little bit of isopropyl alcohol.
2. Your enemy is dust so you want an environment that is less conducive to that. Let the shower run for a while until the steam builds up to ground the dust. Humid=Less dusty. If you haven't guessed by now you will be applying the screen protector in your bathroom.Set up a little station so you can have the phone/screen protector as close to eye level and and as visible as possible to spot any dust particles.
3. The moment of truth! Take another quick swipe with your microfiber cloth and check for any dust particles. You can now peel off the backing. There should be no guesswork here due to your hinge method so this part should be a piece of cake. Slowly lower it starting with the side closest to the screen and it should hinge close. Run your finger down the middle of the screen. You should see it adhere to the rest of the screen on it's own for the most part. Remove the front protective layer. Wrap the little card (or a credit card) with the microfiber and push out any remaining bubbles. You're done! If you did everything correctly not only will your screen protector be perfectly aligned but you will have no bubbles.

This tread should be a salesman good god. After reading through this thread I overed one from ebay right away.
Sent from my SPH-L900 using xda app-developers app

Lmao
Sent from my SCH-I605 using Tapatalk

How thin is this?

keysikasuy said:
How thin is this?
Click to expand...
Click to collapse
0.4 mm thick.

Best PET Film Screen Protector for N5...

Yup - not tempered glass, but PET film. It seems that everyone is interested in glass, and in turn, endless amounts of discussion on issues with glass protectors for the N5. I've used PET film a couple of times in the past few weeks of N5 ownership, in between installations of glass protectors. Each time, the PET film was a joy to go back to, for me. I was wondering which brands of film members have tried and what their results were.
For those who are wondering why the hell would anyone even consider using old-school film, here are the Pros/Cons of film protectors as I see them:
Pros:
- Little/no halo: If we were all installing only film protectors on the N5, we would have, by now, settled on a bunch of brands that get really good results for just about everyone. I've seen this evolution happen with a number of new phones. There's no such consensus on glass protectors for the N5.
- Easier install: if you have at least average skills, you are going to get a good, easy and quick install. Don't need to dedicate time to rubbing out edges that are standing up off the screen, and no need to break out the hair dryer.
- Less visible: really hard to tell that there is a protector on the N5.
- Cost: Film is less expensive, but glass has really come down in price as well.
Cons:
- Less protection: Hey, glass is stronger and harder than film, I get that.
- Not as smooth as glass: although film can be very good, glass is just smoother.
In my experience, it's not until I put a film protector on that I say "Damn, that looks great!" Often I can see a glass protector on a phone at a distance. If it's not the halo it's the edges top and bottom just looking like a protector stuck on the display.
So, I am not starting a case for glass vs film, I just would like to know what film you folks have used on the N5. I use Spigen film and the first install had the tiniest amount of halo above the earpiece (I don't think there should be protector in that area), but everything else was spot-on perfect. The second film is spot-on perfect all around. I have another brand in-bound as we speak.

I bought this 3 and will be able to provide some feedback in ~2 weeks ))
http://www.amazon.com/gp/product/B014R5DMIU?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
http://www.amazon.com/gp/product/B010DB2ROC?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
http://www.amazon.com/gp/product/B010MWD59I?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00

Cool.
I recall someone here saying that they use that brand with good results.

Over at Android Central, a number of N5 owners are now discovering the advantages of PET film.
Hey, it all depends on what you want.
I am still rocking the Spigen film. I'd say it looks perfect, but you really have to look closely to see any evidence of a protector.

billykxda said:
Over at Android Central, a number of N5 owners are now discovering the advantages of PET film.
Hey, it all depends on what you want.
I am still rocking the Spigen film. I'd say it looks perfect, but you really have to look closely to see any evidence of a protector.
Click to expand...
Click to collapse
No halo on that one?
Sent from my SAMSUNG-SM-N920A

I have the ones from iCarez and they don't cover past the light sensors on top which leaves an exposed area, same goes to the bottom where the home key is, but not as much.
I would also like feedback on the Pleson ones especially if they play well with a TPU Hybrid case.

Spigen and it's pretty awesome. Can't even tell it's on both by looks and feel.
Sent from my SAMSUNG-SM-N920A using Tapatalk

ambervals6 said:
No halo on that one?
Sent from my SAMSUNG-SM-N920A
Click to expand...
Click to collapse
No halo on my second install. PET film is far more forgivable b/c it can easily follow the curve on the display edges. That's a major advantage for those of us who want their N5 to look great - as it was designed to do. For me, glass protectors always appear to be less-than-great looking layers of glass stuck on the front of an elegantly-designed N5. So, for now, I am happily rocking a film protector.
I purchased another brand of film protectors, but I am going to hold-off on trying them out. The Spigen is just too perfect to pull-off.
I use a Ringke Slim case that does not interfere with the film at all. I had a more robust Spigen Hybrid case on with the first Spigen film I had installed, and the case would flex inwards occasionally when pressing the power button, lifting it up momentarily, but then it would just lay back down. The Ringke case is particularly good for use with full-size protectors.

billykxda said:
Yup - not tempered glass, but PET film. It seems that everyone is interested in glass, and in turn, endless amounts of discussion on issues with glass protectors for the N5. I've used PET film a couple of times in the past few weeks of N5 ownership, in between installations of glass protectors. Each time, the PET film was a joy to go back to, for me. I was wondering which brands of film members have tried and what their results were.
For those who are wondering why the hell would anyone even consider using old-school film, here are the Pros/Cons of film protectors as I see them:
Pros:
- Little/no halo: If we were all installing only film protectors on the N5, we would have, by now, settled on a bunch of brands that get really good results for just about everyone. I've seen this evolution happen with a number of new phones. There's no such consensus on glass protectors for the N5.
- Easier install: if you have at least average skills, you are going to get a good, easy and quick install. Don't need to dedicate time to rubbing out edges that are standing up off the screen, and no need to break out the hair dryer.
- Less visible: really hard to tell that there is a protector on the N5.
- Cost: Film is less expensive, but glass has really come down in price as well.
Cons:
- Less protection: Hey, glass is stronger and harder than film, I get that.
- Not as smooth as glass: although film can be very good, glass is just smoother.
In my experience, it's not until I put a film protector on that I say "Damn, that looks great!" Often I can see a glass protector on a phone at a distance. If it's not the halo it's the edges top and bottom just looking like a protector stuck on the display.
So, I am not starting a case for glass vs film, I just would like to know what film you folks have used on the N5. I use Spigen film and the first install had the tiniest amount of halo above the earpiece (I don't think there should be protector in that area), but everything else was spot-on perfect. The second film is spot-on perfect all around. I have another brand in-bound as we speak.
Click to expand...
Click to collapse
Can you please post some photos of your Note with the spigen film? Right now I'm using the Nillkin glass and I'm terribly disappointed! I may consider got back to pet films after many years with glass protector!
Thanks in advance!
Tapatalked with my Note 5

dsmpampis said:
Can you please post some photos of your Note with the spigen film? Right now I'm using the Nillkin glass and I'm terribly disappointed! I may consider got back to pet films after many years with glass protector!
Thanks in advance!
Tapatalked with my Note 5
Click to expand...
Click to collapse
I don't have a second phone/camera around to do so. Just tried using my webcam - you don't want to see what that looked like.
Just imagine not seeing a protector. And there you have it.
-bk

billykxda said:
No halo on my second install. PET film is far more forgivable b/c it can easily follow the curve on the display edges. That's a major advantage for those of us who want their N5 to look great - as it was designed to do. For me, glass protectors always appear to be less-than-great looking layers of glass stuck on the front of an elegantly-designed N5. So, for now, I am happily rocking a film protector.
I purchased another brand of film protectors, but I am going to hold-off on trying them out. The Spigen is just too perfect to pull-off.
I use a Ringke Slim case that does not interfere with the film at all. I had a more robust Spigen Hybrid case on with the first Spigen film I had installed, and the case would flex inwards occasionally when pressing the power button, lifting it up momentarily, but then it would just lay back down. The Ringke case is particularly good for use with full-size protectors.
Click to expand...
Click to collapse
Have you noticed the fingerprint scanner being any slower to unlock the device since installing the Spigen screen protector? I just installed mine last night and maybe I'm crazy.. But it just seems a lite bit slower than when I had no screen protector. Maybe I'm crazy! Lol.

skadude66 said:
Have you noticed the fingerprint scanner being any slower to unlock the device since installing the Spigen screen protector? I just installed mine last night and maybe I'm crazy.. But it just seems a lite bit slower than when I had no screen protector. Maybe I'm crazy! Lol.
Click to expand...
Click to collapse
Nope - haven't noticed that at all. Since the protector doesn't go near where the fingerprint detection is going on, I can't imagine how it could interfere.
There's lots of voodoo that's happening with the fingerprint reader that sometimes makes it perfectly accurate, other times less so. Plus, there are the variables involved when you ask a user to configure/set-up complex hardware. I'd look elsewhere.

billykxda said:
Nope - haven't noticed that at all. Since the protector doesn't go near where the fingerprint detection is going on, I can't imagine how it could interfere.
There's lots of voodoo that's happening with the fingerprint reader that sometimes makes it perfectly accurate, other times less so. Plus, there are the variables involved when you ask a user to configure/set-up complex hardware. I'd look elsewhere.
Click to expand...
Click to collapse
I might have installed mine just a little bit crooked... It EVER so slightly touches the silver ring of the home button, but maybe I'm just crazy and it's not actually affecting anything haha.

No b.s spigen, no b.s expensive brand name. 5pack for $1 best screen protector I have got so far. Bestoffer4yu ebay seller from china.
Sent from my SAMSUNG-SM-N920A

I got the iCarez and it was perfect on my note4 but on the note5 it has about 1mm of halo on both sides. Not as visible as a tempered glass halo but at right angle you can see it. Its sized to exactly the LCD part so can't be cut any smaller.
Sent from my SAMSUNG-SM-N920A using Tapatalk

billykxda said:
No halo on my second install. PET film is far more forgivable b/c it can easily follow the curve on the display edges. That's a major advantage for those of us who want their N5 to look great - as it was designed to do. For me, glass protectors always appear to be less-than-great looking layers of glass stuck on the front of an elegantly-designed N5. So, for now, I am happily rocking a film protector.
I purchased another brand of film protectors, but I am going to hold-off on trying them out. The Spigen is just too perfect to pull-off.
I use a Ringke Slim case that does not interfere with the film at all. I had a more robust Spigen Hybrid case on with the first Spigen film I had installed, and the case would flex inwards occasionally when pressing the power button, lifting it up momentarily, but then it would just lay back down. The Ringke case is particularly good for use with full-size protectors.
Click to expand...
Click to collapse
Did you do anything special when you put it on the second time ? Just installed the Spigen Crystal for the first time on my N5 and there's a halo at the top, continuing a little bit down the sides

Spigen Crystal
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tapatalked with my Note 5

http://www.amazon.com/gp/product/B011PYL8C8?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s01
$6 for six screen protectors - done deal.
I got these first and didn't use them. I was provided a few glass protectors to test. Halo after Halo on the glass, finally I broke these out and opened them. Easy install, no real complaints. I didn't miss the feel of these, but it works with the pen well. Currently have mine, my wife and my moms phone protected with these - and three to spare :highfive:

dsmpampis said:
Spigen Crystal
View attachment 3508573View attachment 3508574View attachment 3508579View attachment 3508580View attachment 3508581
Tapatalked with my Note 5
Click to expand...
Click to collapse
That looks amazing. My first install did not come out that well unfortunately any tips ?

vincel892 said:
That looks amazing. My first install did not come out that well unfortunately any tips ?
Click to expand...
Click to collapse
Have you tried the hinge method? Always works for me.
I like the appearance of PET screen protectors, but compared to glass, they scratch pretty easily. On the first day, I had 2 deep scratches just by cleaning the screen with a microfiber. Also, the oleophobic coating can't hold a candle to glass, constantly wiping my screen. I'm using the Spigen Crystal btw. I like how on regular screen protectors, you can reinstall and get rid of dust if it gets stuck under though.
Sent from my SM-N9208 using Tapatalk

OnePlus 3: Orzly Accessories Review!

Hey there guys! Some of you may remember me from my OnePlus 3 Peer Reviews! I hope you liked them if you did read them . Recently I ordered an Orzly FlexiCase and I approached Orzly asking if they would be willing to give me some more accessories for review for you guys! Recently, a package of OnePlus 3 cases, screen protectors etc arrived and here I am to give you my truthful review! (For the screen protector, I also have another brand of one from CaseBase to give you guys an even better comparison) Links to all the products will be in the title of the product name! (It will be red anyway.. All links are to Amazon. Replace the prefix with your countries amazon site.. ie change .co.uk to .com)
1. Tempered Glass Screen Protector
Well, let me start by saying this.. I hate plastic screen protectors. If I have to be honest, this is the first ever tempered glass screen protector I have used, and I am impressed. As you may have seen in my first impressions for my Peer Review, I didn't like the pre-installed screen protector and it wasn't aligned correctly which really bothered me. It also made the screen feel cheap and it collected every single fingerprint.
This screen protector however feels exactly like the actual screen of the OnePlus 3 and it has oleophobic coating on it as well, helping stop all the finger prints. This screen protector was the easiest one I ever installed and the instructions on how to install it were very clear and straight forward. Some pictures? Sure!
(These are some pictures of the packaging and what is included in the package)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The glass itself is 2.5d, just like the actual glass on the phone making it a lot more comfortable to use in the hand. It also works perfectly with cases, and I have used the Orzly Grip-Pro case, Flexi-Case and wallet case with the screen protector installed. As you can see in the upcoming image, it looks great!
As I said at the start of the review, I also installed a CaseBase screen protector on to my OnePlus 3 before I put on the Orzly protector. First thing I liked about the CaseBase protector, they provide you with two of them, which I think is a very good idea. However, the presentation is in no way as good as the Orzly One. They put the cleaning clothes, tempered glass etc all in one packet where as the Orzly glass had everything in its own separate compartments which in my opinion shows that everything was thought through. The actual CaseBase glass is just as good as the Orzly Screen protector. It is also 2.5d, however I found that it didn't go around the edges as much as the Orzly one did. It also was a small bit more of a fingerprint magnet, but it still worked ok, it just wasn't my preference.
(Here are some pictures of the CaseBase screen protector)
(In that packaging for the screen protector, there are two Tempered Glass screens)
2.Orzly Grip-Pro Case
This case has to be one of the best cases I have used to date. It does as the name suggests, it is really grippy. The back of the case has these type of ridges that just stick to your hand. I had my hand nearly vertical before it even started to slide. It is a two-part case meaning you have to separate the case to put it on. There is a soft, rubber inner shell to protect the phone and then there is the hard, grippy shell. The case looks like a bulky case, but it doesn't feel it surprisingly. I really am not a fan of bulky cases so when I first saw this case I wasn't very impressed, but now it is my go-to case.. it just doesn't feel bulky. For those of you wondering, yes this case does protect the camera bump. It actually goes over the bump by a couple of MM which means you shouldn't have to worry about your brand new phones camera glass cracking . The front of the case has a really good lip around the device, and if you place it down on any surface (with the exception of sand and rocks) nothing would be able to touch the screen of the device. I have (with a lot of fear and worry) drop tested the OnePlus 3 in the Grip-Pro case to see the durability, and it survived without a scratch. Only once did the hard outer shell of the Grip-Pro case pop off!
The buttons are a big part of any case, and yes, the buttons on this case are covered by rubber. However, there are little plus and minus marks etc to indicate where the buttons are and there are diagonal lines on either side of the buttons to indicate where they are, however I would still recommend learning where the buttons are positioned before you use this case.
This case comes in a range of colours such as the grey in the pictures, red, pink, blue and silver!
(Some pictures of the grip case)
[​IMG]
Overall, I really do like this case. The ports are exactly where they should be, its grippy, its not as bulky as I thought, the build is similar if not better to that of an Otterbox case.. what isn't there to love?
3. Orzly FlexiCase
If you may remember from the start of this post, this is the case which I purchased for myself when it was on pre-order meaning I have been using it for around 2 weeks. The quality of this case is what you would expect for a gel TPU case, but what surprised me so much was the fact that the ports were just so exact for a device that I purchased on pre order. You often see stories of people getting pre-ordered accessories for their newly released phones and the ports aren't exact or there is a port hole missing etc.
I was using this case in pretty rough Irish country side conditions. I went onto the beach during a storm with the case, and my god the amount of scratches it saved me from getting on the back of the OnePlus 3 was amazing. It saved my phone from getting it's screen smashed after falling out of my pants pocket while cycling down a hill. It really is one of the best, cheap TPU cases out there. This case also does protect the camera which is a really good thing!
The buttons are again, covered, but they do stick out from the rest of the case making them easy to find when its a dark room etc. These cases also come in a range of colours which are Clear (The one I personally purchased), green, black, pink and purple!
(Here are some pictures of the FlexiCase)
4. Orzly Wallet Case
I personally am not a fan of wallet cases, but I know that some of you OnePlus 3 owners/potential buyers are so lets review one!
Firstly, let me start off by saying that this case also comes in a range of colours which are Black, Blue and Red. At the moment I have the blue case.
It is a leather case, and it feels really good in your hand. There is a magnet strap to open and close the case and an opening for the power button to turn it on/off if the case is still closed. There are also openings for the volume buttons when the case is open.
The case is very bulky for my liking, but then again most wallet cases are. On the inside of the case there are two slots for credit cards, money, business cards etc... hence the name wallet case! The case does protect the camera for those of you wondering, which is always a good thing!
(Here are some pictures of the wallet case)
[​IMG]
5. Orzly Fusion Bumper Case
I received this case a few days ago, and I must say I am impressed. I've purchased multiple orzly fusion bumper cases for different devices ranging from the Nexus 6p to the Nextbit Robin and now, the OnePlus 3. I can really see the evolution in the quality of the cases. The Nexus 6p was very plasticy with shiny sides. The Robin was a harder plastic with matte sides allowing better grip. The OnePlus 3 is all hard plastic, with rubber on the insides and it definitely is the best one so far. The rubber allows there to be a lot more protection available to the device which is a good sign! The case does add quite a bit of grip. I love the fact that in the four corners of the device are little stands which allow the phone to stay raised on the back, which you are able to see in the pictures I have attached! There is quite a good bit of a lip around the screen which helps keep it off a surface if the phone is face down and if will allow you to protect it from drops a lot better!
Overall I really love this case. Ports are exact, it's grippy, not bulky and it's cheap for the amount of protection it adds. I 100% recommend this case!
Update:
Here is a picture of the Orzly Grip-Pro case in red ( I really love this colour!!)
And thats all I have for you guys at the moment! I have to say kudos to Orzly for getting this cases out so soon after the launch of the OnePlus 3, and also thanks to them for allowing me to review them for you guys! I really enjoyed testing them out! Hopefully I have helped you guys who are debating if you should get an accessory or not and maybe even have gotten a few of you to purchase one! I 100% recommend the accessories!!
If you have any questions please feel free to PM me or comment below!
Darragh

Do you think Orzly 2.5D Pro Fit Glass protector will fit well with Cruzerlite Bugdroid case?

nice work [and slippers]

yourmate said:
nice work [and slippers]
Click to expand...
Click to collapse
I was just gonna say that...nice slippers! Lol
I'm currently using the cruzerlite bugdroid (clear), which is very nice. However, it doesn't wrap around the sides well, especially with the TGSP. I have ordered the grip pro. Should get it next week.

Update: red grip pro case in hand now and it really is a great colour! But it's personal preference ha.
Also fusion bumper case ordered and on the way! Expected a review soon!

I read from another thread that the Orzly tempered glass protector interfered with the Orzly Flexicase at the sides, do you also find this to be true?

I'll put it out there now, the Orzly 'Pro-Fit' tempered glass pictured here is absolute [email protected]!
Seriously, I don't usually feel bitter about wasting the best part of £10 but on this occasion I need to speak out about it...
For a start they have it completely wrong, they've made the top and bottom parts black (why? is my question....) Then they've put horrible little sticky tape under the frame and those black parts which is the only part that sticks to the screen...
Now if you've ever used tempered glass before (like I did with Ultimate Shield on my OnePlus One) you basically position the tempered glass and press in the middle of the screen, then watch it spread out and self adhere to the screen... This isn't the case with this sh1t... The problem being is that the actual glass part of it is actually always hovering ever so slightly above the screen because of the tape on the borders and black parts being of a certain thickness obviously...
So I stuck it out for a few days as I felt like it offered some sort of protection even though it looked absolute crap and like a back in the day phone because the glass is easily a different colour to the black parts (obviously) only to find a few days later I had collected dust on both edges because the tape hadn't stuck down onto the screen properly or whatever...
Seriously I could easily go on for ages, take pictures etc etc, but at the end of the day, all I want to do is warn people off it, I have Ultimate Shields version of this at home ready to be fitted, I'll give it a try but out of the box it looks like the exact same product so they're both probably made in the same sh1tty way...
Also, I used it with the official Sandstone back cover just so you know I did use a case...
It all fit quite well, but I really don't like the idea of the actual tempered glass having the black top and bottom part, I feel like I might be missing a row of pixels if I position it slightly wrong...
So why can't they just make a big piece of tempered glass (completely transparent) that adheres the old fashioned way by pressing down in the center and watching it spread..?

For the Indians here, wondering about Orzly
I have ordered a bunch of Orzly accessories directly from their site, and will be tracking the progress on this thread.
Head over if you guys wish to know about the shipping time, any issue with customs and whatnot.
Also, this review as pretty dope, I would have loved to see the Fusion Bumper case, but I guess since I bought it, I might as well wait and check it out when it arrives. I'll do a short review if you guys want. I also got the transparent case, and their USB 3.0 cables, purely because I was curious, since we have USB 2.0 on our OnePlus 3.
---------- Post added at 09:20 PM ---------- Previous post was at 09:16 PM ----------
API182 said:
I'll put it out there now, the Orzly 'Pro-Fit' tempered glass pictured here is absolute [email protected]!
Seriously, I don't usually feel bitter about wasting the best part of £10 but on this occasion I need to speak out about it...
For a start they have it completely wrong, they've made the top and bottom parts black (why? is my question....) Then they've put horrible little sticky tape under the frame and those black parts which is the only part that sticks to the screen...
Now if you've ever used tempered glass before (like I did with Ultimate Shield on my OnePlus One) you basically position the tempered glass and press in the middle of the screen, then watch it spread out and self adhere to the screen... This isn't the case with this sh1t... The problem being is that the actual glass part of it is actually always hovering ever so slightly above the screen because of the tape on the borders and black parts being of a certain thickness obviously...
So I stuck it out for a few days as I felt like it offered some sort of protection even though it looked absolute crap and like a back in the day phone because the glass is easily a different colour to the black parts (obviously) only to find a few days later I had collected dust on both edges because the tape hadn't stuck down onto the screen properly or whatever...
Seriously I could easily go on for ages, take pictures etc etc, but at the end of the day, all I want to do is warn people off it, I have Ultimate Shields version of this at home ready to be fitted, I'll give it a try but out of the box it looks like the exact same product so they're both probably made in the same sh1tty way...
Also, I used it with the official Sandstone back cover just so you know I did use a case...
It all fit quite well, but I really don't like the idea of the actual tempered glass having the black top and bottom part, I feel like I might be missing a row of pixels if I position it slightly wrong...
So why can't they just make a big piece of tempered glass (completely transparent) that adheres the old fashioned way by pressing down in the center and watching it spread..?
Click to expand...
Click to collapse
Bro, I am scared about the same things, and you have disheartened me. Since I am getting the Accessories Bundle, I can't really cancel my order now, but once I receive the package, I'll see if your concerns are well founded, and maybe give my second opinion. But I really hope that's not the case.

gro0vr said:
I have ordered a bunch of Orzly accessories directly from their site, and will be tracking the progress on this thread.
Head over if you guys wish to know about the shipping time, any issue with customs and whatnot.
Also, this review as pretty dope, I would have loved to see the Fusion Bumper case, but I guess since I bought it, I might as well wait and check it out when it arrives. I'll do a short review if you guys want. I also got the transparent case, and their USB 3.0 cables, purely because I was curious, since we have USB 2.0 on our OnePlus 3.
---------- Post added at 09:20 PM ---------- Previous post was at 09:16 PM ----------
Bro, I am scared about the same things, and you have disheartened me. Since I am getting the Accessories Bundle, I can't really cancel my order now, but once I receive the package, I'll see if your concerns are well founded, and maybe give my second opinion. But I really hope that's not the case.
Click to expand...
Click to collapse
Here are some pics of the fusion bumper case if you need them

Does the transparent flexi case turn yellowish aftsr a few days?

EpicPlayer said:
Here are some pics of the fusion bumper case if you need them
Click to expand...
Click to collapse
Thanks.
My bundle arrived today. The back of the Fusion Bumper is not as I extracted. There is a rectangular line that runs across.

Update : Added fusion bumper and red grip-pro cases

API182 said:
I'll put it out there now, the Orzly 'Pro-Fit' tempered glass pictured here is absolute [email protected]!
Seriously, I don't usually feel bitter about wasting the best part of £10 but on this occasion I need to speak out about it...
For a start they have it completely wrong, they've made the top and bottom parts black (why? is my question....) Then they've put horrible little sticky tape under the frame and those black parts which is the only part that sticks to the screen...
Now if you've ever used tempered glass before (like I did with Ultimate Shield on my OnePlus One) you basically position the tempered glass and press in the middle of the screen, then watch it spread out and self adhere to the screen... This isn't the case with this sh1t... The problem being is that the actual glass part of it is actually always hovering ever so slightly above the screen because of the tape on the borders and black parts being of a certain thickness obviously...
So I stuck it out for a few days as I felt like it offered some sort of protection even though it looked absolute crap and like a back in the day phone because the glass is easily a different colour to the black parts (obviously) only to find a few days later I had collected dust on both edges because the tape hadn't stuck down onto the screen properly or whatever...
Seriously I could easily go on for ages, take pictures etc etc, but at the end of the day, all I want to do is warn people off it, I have Ultimate Shields version of this at home ready to be fitted, I'll give it a try but out of the box it looks like the exact same product so they're both probably made in the same sh1tty way...
Also, I used it with the official Sandstone back cover just so you know I did use a case...
It all fit quite well, but I really don't like the idea of the actual tempered glass having the black top and bottom part, I feel like I might be missing a row of pixels if I position it slightly wrong...
So why can't they just make a big piece of tempered glass (completely transparent) that adheres the old fashioned way by pressing down in the center and watching it spread..?
Click to expand...
Click to collapse
so far, the entire thing has worked out good for me and the fact there is only adhesive around the sides doesn't bother me very much, but its a personal preference I suppose. As for the black top and bottom thing, I think it is the way it has to be made or something because the other tempered glass I got, the casebase one, has the same thing, a black top and bottom.

shalom06 said:
Does the transparent flexi case turn yellowish aftsr a few days?
Click to expand...
Click to collapse
Nope I have had mine for a couple weeks now and is still as clear as it was on day one

So I got a Pelosi Sandstone case instead and I love it. It has a texture similar to the official Sandstone case but completely covers all four edges rather than just the left and right edge

Screen protectors

Righteo, our phones will be arriving in a week, which screen protectors should we be buying? Thoughts?
I'm tempted by a tempered glass (pun not intended, but I chuckled), but haven't had one before. They seem like they can be pretty thin these days and keep the nice feeling of glass instead of plastic. My Z3C came with protectors for front and back in the box, but looking at the "whats included" things, I can't see any mention of that for the XZ1c.
I guess the requirements are: can't be crap; gotta be reasonably easy to apply bubble free; nice to touch; not going to peel or flake after a few months; not a finger-print magnet; doesn't interfere with the touchscreen function; doesn't alter the colours.
Get your suggestions in! Mobilefun have a couple available to preorder, but I've got no reason to think these are any better than ones on Amazon etc.

Just got my XZ1 Compact from Sony HK. They gave me a third party "nano protector" which is crap; covers the screen but not the wall glass area, the texture is nice but it's a dust magnet. Looking for a full screen tempered glass protector now..
Sent from my G8441 using Tapatalk

Definitely go tempered glass, just dropped my nexus 5x today (a week before upgrade to XZ1 compact) and the screen protector cracked but the screen is fine. I also know a guy at work who has dropped his iphone at least 6 times and broken the screen protector only.
Im tempted to get the sony Xperia™ XZ1 Compact Style Cover Stand SCSG60 for a bit more protection but not sure how ill get on with a cover case like that.
Screen protector wise i've only seen these in the UK
Not sure whats curved about it but its official ish by the looks of it. Not sure i like the black boxes though.
http://www.mobilefun.co.uk/roxfit-mfx-sony-xperia-xz1-compact-curved-glass-screen-protector-64844
Not heard of Olixar but this one has clear glass all over.
http://www.mobilefun.co.uk/olixar-s...t-tempered-glass-screen-protector-black-65018

I found a cheap tempered glass protector, the only one I could find after couple of hours checking shops in Hong Kong.
It went to the trash bin after a day...
It covered the screen area only and its edges wouldn't stick to the phone glass...
Yes, I just found out that the XZ1 glass is 2.5D so it is slightly curved, very very slightly but still.
I guess it will be hard to find a full screen one then. The best option I've found on Internet is a curved plastic protector, similar to what I had on my S7 edge; it should cover nicely the whole area without bubbles or the issues all the curved tempered glass had, but this kind of material is fingerprint, smudges and grease magnet...
Sent from my G8441 using Tapatalk

koziakauzu said:
Just got my XZ1 Compact from Sony HK. They gave me a third party "nano protector" which is crap; covers the screen but not the wall glass area, the texture is nice but it's a dust magnet. Looking for a full screen tempered glass protector now..
Click to expand...
Click to collapse
Try this one - Sony Xperia XZ1 Compact Screen Protector,SMTR® [Edge Full Coverage Screen Protector][Easy-Install][Scratch resistant][Ultra Clear] 2.5D Pro Fit 9H Tempered Glass 0.33mm for Sony Xperia XZ1 Compact - Black https://www.amazon.co.uk/dp/B075686NYQ/ref=cm_sw_r_cp_apa_TQGYzb8Q5M2SG

Oblox said:
http://www.mobilefun.co.uk/roxfit-mfx-sony-xperia-xz1-compact-curved-glass-screen-protector-64844
Click to expand...
Click to collapse
Purchased the full glass screen protector mentioned here as well as the Roxfit book case. Will let you guys know how it goes when I receive them.

Looks like the tempered glass ones don't reach to the edges due to curving of the screen. Might be a bit tricky to find one that covers the entire front properly, and even then, I guess glass is out of the question.
Gonna try one of these: https://www.amazon.co.uk/dp/B0755DYRYQ

Dashers said:
Looks like the tempered glass ones don't reach to the edges due to curving of the screen. Might be a bit tricky to find one that covers the entire front properly, and even then, I guess glass is out of the question.
Gonna try one of these: https://www.amazon.co.uk/dp/B0755DYRYQ
Click to expand...
Click to collapse
This is the Roxfit one, they do the cases under the 'made for xperia' partnership so id hope the glass would be good too (even if not made for xperia)
https://www.roxfit.mobi/products/sony-xperia-xz1-compact-full-cover-tempered-glass

Roxfit one looks the same, I think these ones with the coloured surrounds might be edge-to-edge. If you look at the clear options on Amazon a number of them mention they'll only cover the screen and not go to the edge due to curves. There are a couple of reviews on the XZ1 protectors that mention they don't go to the edge.
Should get mine tomorrow and just received notification of dispatch of my phone too, so hopefully they'll all rock up some time tomorrow.

I bought this screen protector and I'm a little disapointed. Although it was easy to put on and has a good finish. It doesn't wrap round the edges of the curved display and thb, I can't imagine there are any protectors that will.
Part of a screen protectors design is to be hard and ridgid to resist scratches, now get that hard material to wrap round a 90 degree corner.
I'll be interested in feedback of the other protectors listed here.

Dashers said:
Gonna try one of these: https://www.amazon.co.uk/dp/B0755DYRYQ
Click to expand...
Click to collapse
Easy to put on, I did it straight away, so I pulled off the shipping cover and slapped this one down in one movement. No dust, no bubbles.
The black frame is a little weird, the most noticeable bit is the cut out for the Sony logo. But be warned with these glass frames - you cannot use the official DK60 dock! It is just slightly too big to slot in to the correct sized bracket. I've had to use a bigger bracket and shove a bit of card down the back.

Anyone have a suggestion of a normal nonglass screen protector? I just love the one that originally came with my z3c - it's oleophobic so I honestly never see any fingerprint smudges on the screen.

Dashers said:
Easy to put on, I did it straight away, so I pulled off the shipping cover and slapped this one down in one movement. No dust, no bubbles.
The black frame is a little weird, the most noticeable bit is the cut out for the Sony logo. But be warned with these glass frames - you cannot use the official DK60 dock! It is just slightly too big to slot in to the correct sized bracket. I've had to use a bigger bracket and shove a bit of card down the back.
Click to expand...
Click to collapse
So is it ok in use with the phone? Id rather have full coverage but ive seen some not full coverage ones that are completely clear and so wont look as odd with the black sections.

Alas, the only camera I have on me at the moment is my phone. But it doesn't look too bad, I can't see a clear one looking any better in reality as the thickness is the most distracting thing. A film one will get a snugger fit, but the clarity and feel isn't anywhere as nice as glass.

This one from Protectionfilms24.com is more up my street, old school film with cutouts only where they need to be but need to get more info on just how much "smaller than the display" it actually is.

(all screen protectors listed in this thread don't ship to my country and I'm not a big fan of colored frame either)
Last try until I give up and just use my phone without a screen protector.
Installed an " Imak Hydrogel " protector (installation requires water)... Good thing is it came with 2 pieces.
I have lot of experience with regular plastic ones and tempered glass but this is my first protector requiring water..
I've installed the first one and I had an horrible texture, when I decided to remove it I also tried to reposition it just to see if it could be better. Indeed it was but it was also already ruined by my fingerprints underneath. (it doesn't adhere to transparent tape, hard to find a way to peel it off or just reposition it)
I've then installed the spare one and is definitely better this time. Not perfect but definitely usable. I have to see how scratch prone it is and if it doesn't retain oil or fingerprints too much.
Oh yes and it is covering the whole glass edge to edge..
Sent from my G8441 using Tapatalk

I went with the Omaton (https://www.amazon.co.uk/dp/B0755DYRYQ) as previously listed. Really not a fan of the black frame bits i just dont see the need and it stops one product being used by all coloured models which seems a bit unsound in a business sense too.
Still the application and packaging and all the stickers screen wipes and so on made the process really easy and i got a dust and bubble free application and pleased with the end result and i can live with the oddly boxed Sony logo.

Omaton with the black frame fitted:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can see it goes past the edge of the screen, but doesn't quite meet the edge of the phone (due to curving). So unless somebody makes a shaped front piece, I think this probably going to be as good as it gets for glass.

duplicate

Dashers said:
Omaton with the black frame fitted:
-snip-
You can see it goes past the edge of the screen, but doesn't quite meet the edge of the phone (due to curving). So unless somebody makes a shaped front piece, I think this probably going to be as good as it gets for glass.
Click to expand...
Click to collapse
That looks pretty damn good.