PLEASE HELP
IM A NOOB SO I BLAME MYSELF AND IT REALLY WAS MY FAULT.
I WANTED TO FACTORY RESET MY ROOTED NC.
But some clockwork android thing would let me, they it didnt let me sign into my google account, i did the 8 time reset and some orange screen popped up, i cleared everything and now my NC wont turn on, its not even 3 weeks old, please is there anything i can do? really it wont boot up at all im terrified.
Anything helps.
christianrios said:
PLEASE HELP
IM A NOOB SO I BLAME MYSELF AND IT REALLY WAS MY FAULT.
I WANTED TO FACTORY RESET MY ROOTED NC.
But some clockwork android thing would let me, they it didnt let me sign into my google account, i did the 8 time reset and some orange screen popped up, i cleared everything and now my NC wont turn on, its not even 3 weeks old, please is there anything i can do? really it wont boot up at all im terrified.
Anything helps.
Click to expand...
Click to collapse
If it won't power up, just try pluging in the usb cord or hold the power button for 20 seconds. Try it a few times.
I should be honest, there was an option that said format boot, and i pressed it, when i plug in the usb it wont even get detected by the computer and i already tried plugging it in and turning it on, it there any hope?
What orange thing did you wipe everything in? Was it clockwork recovery? What did you we wipe?
some cache that start with d
boot
sd
i tried the factory reset option and it wouldnt go through
i think it was mostly caches, the thing i believe screwed me was the boot
I agree...I had to reboot the 8 times many times and then it boot looped and after 1 hr of rebooting and trying to re-installing 1.0, 1.0.1 and 1.1.0 it finally went back to stock 1.0 after I placed the auto-nooter sdcard back into the nookcolor and did the 8 times...IT WORKED I got the going back screen and now I am back up and running.
OH, HAD to plug in the usb to the PC also! So plug in and sdcard and do the 8 times...
Oh god, why do people like you purchase something such as a NC and try to modify it?
Try following the steps below, or don't, and try to return your Nook Color for a new one, and in the future don't touch it. Ever.
http://forum.xda-developers.com/showthread.php?t=931720
christianrios said:
I should be honest, there was an option that said format boot, and i pressed it, when i plug in the usb it wont even get detected by the computer and i already tried plugging it in and turning it on, it there any hope?
Click to expand...
Click to collapse
That's why it won't boot you selected format boot. You need to go to the thread that says restore to stock. Try one of these threads.
http://forum.xda-developers.com/showthread.php?t=914690
http://forum.xda-developers.com/showthread.php?t=919353
but mine wont boot, the screen is completly off? is this what happrned to you?
nootered said:
Oh god, why do people like you purchase something such as a NC and try to modify it?
Try following the steps below, or don't, and try to return your Nook Color for a new one, and in the future don't touch it. Ever.
http://forum.xda-developers.com/showthread.php?t=931720
Click to expand...
Click to collapse
that's a bit harsh. There is no need to return it you can fix it just follow directions. In the future don't format something if you font know what will happen!
christianrios said:
but mine wont boot, the screen is completly off? is this what happrned to you?
Click to expand...
Click to collapse
If you grab the file here:
http://forum.xda-developers.com/showthread.php?t=922870
You can make a bootable recovery SD card. If you stick that in your nook, it should boot into recovery. Once you are in recovery, you can pull that SD card. Then you can put one in that has a backup. If you don't have a backup, you could probably get yourself back to stock from there. Then just start over.
Novarider said:
that's a bit harsh. There is no need to return it you can fix it just follow directions. In the future don't format something if you font know what will happen!
Click to expand...
Click to collapse
I just can't understand why someone would confirm anything, let alone a "Format", without knowing full well what it was before doing so. It makes no sense.
I don't mean to be harsh, just some friendly advice, that's all.
Novarider said:
that's a bit harsh. There is no need to return it you can fix it just follow directions. In the future don't format something if you font know what will happen!
Click to expand...
Click to collapse
Thanks I wont. Im calmer now that i see the light at the end of the tunnel. but im not able to download 1.0.1 or 1.0.0, it takes me to a blank page, my browser blocks the download and when i click on the bar on the top and select download file, nothing happens.
EDIT: Figured it Out Thanks
philburkhardt said:
If you grab the file here:
http://forum.xda-developers.com/showthread.php?t=922870
You can make a bootable recovery SD card. If you stick that in your nook, it should boot into recovery. Once you are in recovery, you can pull that SD card. Then you can put one in that has a backup. If you don't have a backup, you could probably get yourself back to stock from there. Then just start over.
Click to expand...
Click to collapse
Sorry but which file do i download? there are three option, and im tired of making mistakes
Don't worry about your Nook Color. It's all recoverable. I did some tests with my Nook too because the LogicPD thing wouldn't let me register my Gmail account. I format boot, data, and system. Formatting boot will give you the black screen you are having. You don't know if it's dead, on, or off but I assured you the Nook is not dead.
Get a copy of Clockwork and burn it to a uSD and copy a flashable sideload_update.zip to it. Put the uSD in your Nook Color. Have your Nook Color plugged to the power outlet. Hold the power button like 10 seconds. If it's not on, hold another 10 seconds until the screen powered on. Then run the recovery zip file.
Now if the LogicPD thing won't register your Gmail account, just skip it. Go to your NookTool settings, and run the second Wifi settings which does the Nook setup. There is something wrong with your Nook not getting registered causing the Market to not have wifi so it couldn't connect.
By burn do you mean i have to "burn" it onto the sd card using diskimager
christianrios said:
By burn do you mean i have to "burn" it onto the sd card using diskimager
Click to expand...
Click to collapse
Yes, that is correct.
You want this either of the bottom two files. They are the same, just meant for different size SD cards. If you are using an SD that is 1gb or larger, either one will work.
christianrios, just to let you know, I did the exact same thing. I formatted Boot and system and my nook would not power on.
But doing the clockwork recovery bootable SD thing fixed it easily so don't worry. You'll fix it.
Im getting frustrated here, im on the cwr screen and i formaat system and data, i run the sd install reboot and nothing, what am i doing wrong?
Ok, here is what you do! Make the clockwork recovery SD card. But also! put the 1.1 rom zip file from this thread http://forum.xda-developers.com/showthread.php?t=932145 onto the SD card.
Now when you boot into clockwork recovery, select "install zip from sdcard" then pick "choose zip from sdcard" and then find the 1.1 rom and it will install. Reboot without the SD card in the nook and it should be fixed.
Related
I bricked my CDMA Hero. I rooted it with the super one click, and installed a early version of froyo, and had some issues with it. I wanted to get it off, so I used CWM recovery, and formatted everything. Now when I turn it on it goes to the HTC opening screen, and stays there for hours until the battery dies. It will charge, but my computer doesn't recognize it, and it will not boot. What can I do?
Bricked means it is a brick and that is it, your phone still turns on so the good news is that it is not bricked.
Need some more info before anyone can help:
1. You reformatted everything using clockwork recovery
2. Did you re-install a new ROM?
3. Did you restore a nandroid backup?
I would recommend booting into recovery and wiping everything (factory reset and dalvik-cache) in recovery, then reinstall froyo - once you are booted and running you can figure out what you want to put on it. At least your phone would work then.
stonemad said:
I bricked my CDMA Hero. I rooted it with the super one click, and installed a early version of froyo, and had some issues with it. I wanted to get it off, so I used CWM recovery, and formatted everything. Now when I turn it on it goes to the HTC opening screen, and stays there for hours until the battery dies. It will charge, but my computer doesn't recognize it, and it will not boot. What can I do?
Click to expand...
Click to collapse
Just what Heaterz16 said...
I'm also pretty sure your phone isn't bricked, as long as you can still get into Recovery, it Most Likely can be Fixed!
I also Recommend trying to Wipe Everything, then Reinstalling a New Rom, Also as a Suggestion... If it were me I'd Probably Choose a Different ROM to install! My Very First ROM I Flashed was a Cyanogen one, and I had Trouble with it Booting Also!!
Try LiquidSense... its Only 2.1, but its Stable, It Boots Fast, and just plain out Fast as Hell!
You can always Switch to Whatever you want... Once you get your phone back to a Working Condition!
Good Luck!
Sent from my HERO200 using XDA App
I cannot get it into recovery now. It will turn on, but it stops at the initial HTC screen, and stays there until the battery dies. When I connect my phone with my computer, the computer recognizes it, but I can't seem to get the 2.1 exe from HTC.com download to the phone. My guess is I wiped the thing clean. Unfortuneately, I didn't back anything up.
I can't even get into recovery, it just sits on the HTC startup screen until the battery dies. It does recognize when I connect it to my computer, but running the 2.1 exe doesn't do anything.
Can you adb into the phone and flash a recovery?
I think that would be a helpful start.
stonemad said:
I can't even get into recovery, it just sits on the HTC startup screen until the battery dies. It does recognize when I connect it to my computer, but running the 2.1 exe doesn't do anything.
Click to expand...
Click to collapse
Pull the battery, hold volume down and power and you should boot into bootloader. I believe it is *home* to get you back into recovery. Then reinstall a new rom and you should be good to go.
kwahomba said:
Pull the battery, hold volume down and power and you should boot into bootloader. I believe it is *home* to get you back into recovery. Then reinstall a new rom and you should be good to go.
Click to expand...
Click to collapse
kwhomba,
he can't get into the recovery.
mtran2988 said:
kwhomba,
he can't get into the recovery.
Click to expand...
Click to collapse
t-y, got it. Yeah, then adb a new recovery image may be the only thing. But he may not even be able to get in then.
Just a matter of waiting right now.
He did say his computer was recognizing his device, so he might be ok.
If he can flash a new recovery, or even just adb.. then he can start rebuilding it.
stonemad:
You'll want to grab a recovery, and try to connect to your phone via ADB when it's on.
Then do adb shell
then : flash_image recover [name of recovery].img
let us know
Ok, I can get to the CWM recovery, there is no backup files, no recovery files, and no files on my sd card. I cannot seem to get an opperating system on. I mounted my phone to my computer and downloaded .zip files, but it still says no files available.
How do I flash a recovery, I can't find any files anywhere.
i have .zip files on my sd card to flash, but when I try to apply them it says no files found.
Ok, I have been working on this all day. Thank you to every body who answered. This is the situation as best as I see it. I can use the power and the down volume buttons to go to recovery mode. I have ClockworkMod 2.5 and can mount my computer to my sd card. It appears that I don't have an opperating system at all, or anything else on the phone. I have downloaded several .zip files and tried to install them, I can mount them, but when I try to apply them it states that there are no update.zip files on the sd card. I have deduced that I need an opperating system for an update to work, but I could be wrong. I am having a hard time finding the right files to use to get my phone to go. It seems salvageable, but I'm not sure how. People have sugested a couple of Mods to instal, but I don't know how to do that with what I have. CWM is asking for a update.zip, or a recovery.zip, but I don't know wich one at which time, or even how to get it to flash. That is what I think I know, but that is subject to change depening on what you all know.(showing just how foolish I really am) Thanks again people for you time and advice, I really do appreciate it.
Don't select "install update.zip", select "install zip from SD card" or whatever the option is called.
I've tried that too, it seems like all the software is gone. HTC, Sprint, Google, and Android. Does anybody have a download they think will work. I'm at the point to try anything.
stonemad said:
I've tried that too, it seems like all the software is gone. HTC, Sprint, Google, and Android. Does anybody have a download they think will work. I'm at the point to try anything.
Click to expand...
Click to collapse
What software are you talking about? Sprint, Google, and Android what, specifically? A download for what?
Mount usb storage in recovery, put rom of your choice on there, and flash?
what about kernals, how do I know that I have everything I need?
ROMs generally have kernels in the zip builds already. From the sounds of it, you're kind of lost at what you're doing.
Do you have a SD card reader? if so, plug in the SD card to your computer and pull over a ROM zip, like Cyanogenmod or whatever is to your liking.
Then in recovery, go to "install zip from sdcard"
go to "Choose zip from sdcard"
then search for the ROM zip you put on the sd card.
State exactly STEP BY STEP, what you are doing. Your phone is perfectly fine, you just dont have a ROM on your phone, which is why you cant boot. You're not missing kernels, or anything, you simply dont have the baseline of a ROM on your phone yet.
Post back
I don't know where or how to find a rom, I have heard good things about cyanogen, but can't seem to find where to download it. Is ClockworkMod a rom, and if so how do I use it. You're right, I got way in over my head, and now I just want my phone back the way I bought it. What is your favorite rom, and can you give me a link. Thanks again everyone.
Well I don't know what I did but this morning when my nookie froyo emmc was at 20 percent it decided to turn off and not turn on and won't turn on when charged and will not boot any sd cards. I feel stupid but after my nook working on emmc froyo for a week and now its not even turning on I feel very stupid. All help is appreciated, thanks!
Sent from my ADR6300 using Tapatalk
Have you tried booting to the CWR card yet? And using Samuelhalff's zip that restores the stock partitions? This seems to have worked for many people experiencing the fatal Froyo crash. Take a look at the 'Easily Restore to Stock" thread found here in the Nook forums. And in the end if your device truly won't turn on, then chances are the guys down at B&N won't be able to either. *Warranty*
Well I have tried monster root pack as a card but I haven't tried stock partitioning,i dont know where the thread is. But will this let me even boot an sd card ?
Sent from my ADR6300 using Tapatalk
RileyGrant said:
Were you running froyo off emmc? If so:
http://forum.xda-developers.com/showthread.php?t=931720
I recommend flashing this ROM instead though (pre-rooted 1.1):
http://forum.xda-developers.com/showthread.php?t=932145
And yes if you insert the CWR sdcard into the nook and hold the power button, it will power on. The reason it isnt powering on currently is because your froyo boot partition is corrupted, not because of the nook itself. The CWR sdcard has a different boot partition that your nook will see and boot to when you hold the power button down with the CWR sdcard in.
Click to expand...
Click to collapse
Thats my post from an earlier thread with someone having the same issues. It worked for him, it should work for you. Just make sure you follow the steps right and especially make sure your burning the Clockwork image to your SDcard correctly that way it will boot into Clockwork instead of staying black.
I'm gonna have to give these steps a whirl. The downloads are taking foreeeever.
Also had Froyo installed with CWM and just got finished installing gapps. I went to format an SD card, had no luck, and tried to reboot. Ol' Nookie decided not to come back to life after that.
edit: wait, instead of flashing the stock rom can I flash the pre-rooted 1.1 rom?
Just read this over on android central (in a thread about flashing honeycomb). I believe it is what I did and why my nook won't boot:
****While running Honeycomb from Internal Memory NEVER choose the option to format your SD Card from within Honeycomb. The files that were altered to let HC run internally will lead the OS to actually format your boot partition instead of your SD. If you need to format an SD, do it on your computer or in an Android phone, etc.*****
Click to expand...
Click to collapse
Drat. Just got my CWM image on my sd card. Here goes nothin! Will report back
OK, I have CWM booting off the SD card, i'm formatting system and data under mounts and storage, and then i'm installing the 1.0.1 complete restore. It goes through and then I got to reboot system. Then...nothing. Back to black screen. Help please!
I can pop the SD card back in and boot back to CWM. I've tried several times now with no luck
samuelhalff has a flashable zip that restores the boot partition for situations like this. Go look for it in the development forum. you should be able to flash it using CWR and your NC ought to boot.
eyecrispy, thank you! samuelhalff's boot zip followed by his 1.0.1 complete restore zip did the trick.
RileyGrant, thank you for your post as well. Much obliged!!
Mine just shows a blank screen. All I did was boot into ClockwordMod Recovery, make a backup, then reboot. I was going to flash the Honeycomb Rom, but decided to give it some more thought first. Now All I get is the blank screen, it won't power all the way off, and it won't power on or anything
EDIT: Managed to get it to turn off, but when I turn it back on it boots into recovery. I select Reboot System now, and it reboots back into recovery. Forgive me, I'm so new to this Nook Color thing lol
EDIT AGAIN: Tried using the Monster Pack or whatever, flashed the removeclockwork.zip, followed by the installclockwork.zip, then removed the SD card, rebooted, and went right back into Clockwork Recovery. What gives?
YUP Same thing happened to me. I have read all the posts in this thread and i did try to format the card i had in my nook in the brand new phiremod froyo rom. Now it wont boot at all. I have a CRW card on hand and it wont even boot that. Idk right now, nothing is working.
Try reading through the Dummies Guide to Fixing 'My Nook Won't Boot'.
I did it last night and I'm back up and running again. Here's my post for an abridged version of what I did last night: http://forum.xda-developers.com/showpost.php?p=11374824&postcount=29
I had the same problem until I flashed the repartition fix.
Give that a try
I've got the exact same problem as the OP. Running Froyo on EMMC with no problems for a few days, then I left it for a while and now it wont turn back on or boot from uSD.
I've tried long presses on the power key, usb cable power up, but nothing works. I've tried the v4 HC image and the clockwork recovery image and neither are booting.
I verified the CWR image on my android phone and it does boot on my phone, so the image is definitely okay.
Hate to think it, but could this be a battery management issue in the 0.6.7 image and the battery is now screwed? Doesn't seem like boot partition corruption to me.
Any comments or suggestions are welcomed
ChrisAC84 said:
Mine just shows a blank screen. All I did was boot into ClockwordMod Recovery, make a backup, then reboot. I was going to flash the Honeycomb Rom, but decided to give it some more thought first. Now All I get is the blank screen, it won't power all the way off, and it won't power on or anything
EDIT: Managed to get it to turn off, but when I turn it back on it boots into recovery. I select Reboot System now, and it reboots back into recovery. Forgive me, I'm so new to this Nook Color thing lol
EDIT AGAIN: Tried using the Monster Pack or whatever, flashed the removeclockwork.zip, followed by the installclockwork.zip, then removed the SD card, rebooted, and went right back into Clockwork Recovery. What gives?
Click to expand...
Click to collapse
how did you get yours to turn off, my screen says loading... and is stuck there. any help in getting mine to shut off would be helpful
Does holding power button for a few seconds turn it off?
Same thing happened to me, this fixed my problem: http://forum.xda-developers.com/showthread.php?t=986977
Sorry for asking what's probably a silly question, but I haven't seen an answer. Is this known to the Nookie dev(s) and being addressed? Just had it happen running Nookie 0.6.8 off the SD card. I was really enjoying it and just telling the wife how I think I'll flash it to the eMMC, but I might have to reconsider if this might occur. Battery was ~80%, no goof-ups reformatting anything. Locked the screen around 1:10 this afternoon & hadn't touched it since. Got home about an hour ago to turn it on, nothing. Disappointing, Nookie is pretty good!
nook color wont turn on
so what to do if i dont have a sd card with cwr or honeycomb (what i was trying to run)ive already called for the replacement, but i would still like to know what to do.
I found this thread after suffering the same or similar problem to everyone else. I turned off the screen and set my nc aside for a few minutes, then it would no longer boot. Screen just stayed black and was completely unresponsive to any input. Working my way through some troubleshooting, I plugged the nc into my computer via USB and it booted into CM7 instantly. I have no idea why this happened, but it's working fine now.
Hi all,
I was hoping someone would be able to help me out as I am seemingly in a bad situation. I received my Nook 2 days ago and rooted and tried out a few different ROMS to get a feel for the choices. In any case, for some reason my Nook no longer appears to be booting anything from internal memory. Any ROM I have tried (stock included) has failed to boot, but I can get the Nook to load CWR with the memory card in. When I say failed to boot, I mean a black screen. Like no response from the device at all.
Please if anyone can help it would be greatly appreciated, I really dont know what else to do or what the problem is.
Thanks,
Michaelangelo
mad1100 said:
Hi all,
I was hoping someone would be able to help me out as I am seemingly in a bad situation. I received my Nook 2 days ago and rooted and tried out a few different ROMS to get a feel for the choices. In any case, for some reason my Nook no longer appears to be booting anything from internal memory. Any ROM I have tried (stock included) has failed to boot, but I can get the Nook to load CWR with the memory card in. When I say failed to boot, I mean a black screen. Like no response from the device at all.
Please if anyone can help it would be greatly appreciated, I really dont know what else to do or what the problem is.
Thanks,
Michaelangelo
Click to expand...
Click to collapse
Get the nook restore to stock zip and the boot restore zip. Flash those both back to it. Also, make sure you are wiping, System, then Data, then Boot beforehand. And wipe both Dalvik and cache. Nook Color is nearly impossible to hard-brick (in the sense of being unable to recover from it).
mad1100 said:
Hi all,
I was hoping someone would be able to help me out as I am seemingly in a bad situation. I received my Nook 2 days ago and rooted and tried out a few different ROMS to get a feel for the choices. In any case, for some reason my Nook no longer appears to be booting anything from internal memory. Any ROM I have tried (stock included) has failed to boot, but I can get the Nook to load CWR with the memory card in. When I say failed to boot, I mean a black screen. Like no response from the device at all.
Please if anyone can help it would be greatly appreciated, I really dont know what else to do or what the problem is.
Thanks,
Michaelangelo
Click to expand...
Click to collapse
This happens because the boot partition is corrupt. This is usually the result of you formatting the SD card with CM7. Due to a bug, when you try to format the SD card, it will wipe out the boot partion as well. Just restore the boot partion and you will be OK.
neozen21 said:
This happens because the boot partition is corrupt. This is usually the result of you formatting the SD card with CM7. Due to a bug, when you try to format the SD card, it will wipe out the boot partion as well. Just restore the boot partion and you will be OK.
Click to expand...
Click to collapse
Is there a way to do that when the screen is not working?
An automated install or do we just push buttons as per the same task on another nook and hope
Okay, so I understand that the problem is that CM7 changed around the boot partition files, that makes sense as that was the last thing I could get running on internal memory. When I was flashing HC v4 to EMMC I also flashed a boot repair, and that still did not work. I cannot seem to find a boot repair file for stock, where do I get that.
Sorry for the noob questions, and I am definitely trying to use search the forums for answers before i ask these questions!
We have life!!! I found a stock boot restore file and it turned out to work, I am back to stock again. Man this is sure a learning experience. I have been flashing my Evo for a while now, but the nook is a different beast all together.
Thanks for your help all, I think I am good from here on out!
chrysilis said:
Is there a way to do that when the screen is not working?
An automated install or do we just push buttons as per the same task on another nook and hope
Click to expand...
Click to collapse
You get a microSD card with CWR and the both .zip files for the stock 1.1 and the boot partion, then pick install .zip from SD card and flash both files. When done, take out the microSD card and your NC should be able to boot normally...
neozen21 said:
You get a microSD card with CWR and the both .zip files for the stock 1.1 and the boot partion, then pick install .zip from SD card and flash both files. When done, take out the microSD card and your NC should be able to boot normally...
Click to expand...
Click to collapse
And if the screen isn't turning on but SD cards seem to boot?
chrysilis said:
Is there a way to do that when the screen is not working?
Click to expand...
Click to collapse
The solution I am trying now is to leave it for a few days so tonight/tomorrow we'll see if it comes back!
chrysilis said:
And if the screen isn't turning on but SD cards seem to boot?
The solution I am trying now is to leave it for a few days so tonight/tomorrow we'll see if it comes back!
Click to expand...
Click to collapse
How do you know it's booting into CWR on the SD if the screen is not working?
If your screen is not working when booting from a SD card, then.. maybe there is something wrong with your nook???
neozen21 said:
How do you know it's booting into CWR on the SD if the screen is not working?
If your screen is not working when booting from a SD card, then.. maybe there is something wrong with your nook???
Click to expand...
Click to collapse
If I boot nooter 0.2 then the USB plug goes green which apparently indicates booting. Oh and OMAP3630 shows up for a second on booting too.
Thing is I didn't do anything to break the screen and there is no physical damage to the unit. so it's just weird
chrysilis said:
If I boot nooter 0.2 then the USB plug goes green which apparently indicates booting. Oh and OMAP3630 shows up for a second on booting too.
Thing is I didn't do anything to break the screen and there is no physical damage to the unit. so it's just weird
Click to expand...
Click to collapse
I thought I had the same issue because of the screen being blank. That said it is highly unlikely your hardware ( ie screen ) is bad. I was able to get mine working correctly last night doing what is mentioned above. However to get it to work right booting into CWR via a bootable sdcard I had to make a new bootable sdcard from the one I had. Not sure if something was corrupted on the card I was trying to use or what. But as soon as I made a new bootable sdcard and put it in the device and powered on it boot right up to CWR off the sdcard like I needed so I could fix it. So my suggestion if you can is take a totally different sdard fro the one you have been using and make a new bootable sdcard and give it a shot.
BTW with no card in the device hold the power key down for about 20 secs to make sure it is fully powered off. Even tho your screen is blank does NOT mean it is fully powered off as I learned real fast last night when I tried working on mine. I thought it was off from the night before but it must not have been because I put a bootable HC sdcard in it and when I plugged it in I got a msg saying battery to low to power on plz try again in 15 mins. About 10 mins later I came back and it was finally powering itself on and booting into HC off the sdcard. So I let it fully charge and then start playing with it to finally get it back up and running again.
Not sure what I did while in recovery, but it was looping after trying to update Phiremod with a auto update. Screen went black and ever since my pc with not recognize the nook being plugged in nor will it boot into recovery with the appropriate zip and image on my sd card.
Any clues would be much appreciated
PapaMag said:
Not sure what I did while in recovery, but it was looping after trying to update Phiremod with a auto update. Screen went black and ever since my pc with not recognize the nook being plugged in nor will it boot into recovery with the appropriate zip and image on my sd card.
Any clues would be much appreciated
Click to expand...
Click to collapse
There's no way you bricked an "unbrickable" device. You may just have to create a CWM SD and restore your previous Phiremod ROM.
P.S. SD boot priority ROCKS!!
natoe33 said:
There's no way you bricked an "unbrickable" device...
Click to expand...
Click to collapse
Challenge Accepted!
The first thing to try if you're getting no response is to hold down 'n' while powering on and see what happens. Otherwise, hit the pinned "My Nook won't boot" thread in General.
Try booting with no SD card in. If that works some Androids I have played with don't like to boot with the ROM zip on the root. The nook especially gets stuck trying to boot from the SD when there is nothing to boot on it.
Sent from a CM7 DInc2
I am just saying I have tried all of the above and there is no response from my nook. I have the CMW SD and nothing, I have tried holding down the n while powering on, nothing I have tried booting with no SD, nothing. I have been all though the Pinned thread my nook won't boot, tried it all, even bought a new sd card just in case, nothing
PapaMag said:
I am just saying I have tried all of the above and there is no response from my nook. I have the CMW SD and nothing, I have tried holding down the n while powering on, nothing I have tried booting with no SD, nothing. I have been all though the Pinned thread my nook won't boot, tried it all, even bought a new sd card just in case, nothing
Click to expand...
Click to collapse
What program are you using to burn the clockwork card?
Sent from my LG Optimus V using Tapatalk
Win32Diskimager, I think I'm stuck until my pc with recognize the device. The light on the Nook Power Cord changes from yellow to green like it's supposed to. Can't imagine the port on the nook just going bad at the same time but maybe that's the case.
just got back from Barnes and Noble, they could not get the Nook to be recognized on their computer with a new cord either
PapaMag said:
Win32Diskimager, I think I'm stuck until my pc with recognize the device. The light on the Nook Power Cord changes from yellow to green like it's supposed to. Can't imagine the port on the nook just going bad at the same time but maybe that's the case.
Click to expand...
Click to collapse
Did you make sure to run as admin and check the MD5?
Sent from my LG Optimus V using Tapatalk
yes everything has been done over and over, the nook is not recognized by the pc which in turn won't allow me to boot to anything.
wonder if the screen went bad
but then again, if it is powering on and the screen is bad, you should see it via adb
if the port and the screen went bad, then you didnt brick it per say, but its just hardware failure.
if its under warranty and registered, id say try to get it rma'd
if it is truely dead, they cant say that you voided the warranty
The sdcard adapter being used to burn the cwm or cyanogenmod install can influence whether or not the nook will boot from it.
Try burning the sdcard using a different adapter. I ended up using both the nook itself as well as my phone plugged into my PC as any attempt to boot from an sdcard burnt from the adapter that came with it will not even power on when inserted into the nook.
Hope this helps.
Sent from my NookColor using XDA Premium App
After several attempts and a few SD Cards I am back up and running. Thanks for all the advice and help. I believe it was a bad image, finally got it restored, rooted and running cynogenmod once again
I saw in the other forum. Glad you got it working.....
While I was DE-registering my NOOK HD+ I pull the SD card. It pop up a dialogue box saying something has crashed. I dismissed it and proceeded the process again. Now my NOOK stuck at the NOOK logo. When I put in a SD card with CWM it does not get pass cyanoboot logo. How have a CWM backup for my nook but since it can't load CWM I can't do any restore. Please help.
Zxa329 said:
While I was DE-registering my NOOK HD+ I pull the SD card. It pop up a dialogue box saying something has crashed. I dismissed it and proceeded the process again. Now my NOOK stuck at the NOOK logo. When I put in a SD card with CWM it does not get pass cyanoboot logo. How have a CWM backup for my nook but since it can't load CWM I can't do any restore. Please help.
Click to expand...
Click to collapse
Try doing a 8 failed boot reset. Interrupt the boot without the SD in 8 times in a row. Just hold the power button for a few seconds after each boot try. It will format everything and install the factory rom. Then maybe you can boot the CWM SD and restore.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Try doing a 8 failed boot reset. Interrupt the boot without the SD in 8 times in a row. Just hold the power button for a few seconds after each boot try. It will format everything and install the factory rom. Then maybe you can boot the CWM SD and restore.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Dear Leapinlar,
Thank you very much for your advise. Have already done many power down and up etc. Just tried it again, see the Nook logo, press the power button until it disappear, press the button until it appear etc. Done more than 8, no luck. Is there some timing requirement? How does the home button come into play concerning some low level signal to which code? Tech support guy from BnN asked me to hold the two buttons for 30-40s, no luck there.
The fact that cyanoboot logo appear with the CWM does that mean code introduced by the SD card is gaining control but was stuck looking for something that was not there? Is there a version that can just boot up and let me do some restoring?
Zxa329 said:
Dear Leapinlar,
Thank you very much for your advise. Have already done many power down and up etc. Just tried it again, see the Nook logo, press the power button until it disappear, press the button until it appear etc. Done more than 8, no luck. Is there some timing requirement? How does the home button come into play concerning some low level signal to which code? Tech support guy from BnN asked me to hold the two buttons for 30-40s, no luck there.
The fact that cyanoboot logo appear with the CWM does that mean code introduced by the SD card is gaining control but was stuck looking for something that was not there? Is there a version that can just boot up and let me do some restoring?
Click to expand...
Click to collapse
Without the SD in, the booting to n logo and powering off many times should kick in the reset. Maybe you are powering off when it is trying to reset. Let it go with booting for a few seconds before you power off, to make sure it is not in the reset mode.
EDIT: Wait till the n dims (or even a little longer) each time before you power off. That way you are sure it is not in the reset mode.
Sent from my Nook HD+ running CM10 on Hybrid SD
Try pressing N (or it could've been N + power button) without the SD card in, right after switching on the device. You should have a menu appear to hard reset the device.
EDIT: Actually, you might need to press N before turning on the device. I definitely seen this menu while playing around with the buttons.
leapinlar said:
Without the SD in, the booting to n logo and powering off many times should kick in the reset. Maybe you are powering off when it is trying to reset. Let it go with booting for a few seconds before you power off, to make sure it is not in the reset mode.
EDIT: Wait till the n dims (or even a little longer) each time before you power off. That way you are sure it is not in the reset mode.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Tried, still no luck. Notice that dimming does not happen any more. Nook logo stay at the same brightness forever.
Zxa329 said:
Tried, still no luck. Notice that dimming does not happen any more. Nook logo stay at the same brightness forever.
Click to expand...
Click to collapse
Sounds like a hardware failure. I suggest a warranty exchange.
Sent from my Nook HD+ running CM10 on Hybrid SD
I say you can try put CWM on diff card and try booting off diff card. At least that's one last thing you haven't try. Still, that's not gonna fix your stock nook, unless you made a backup.
Zxa329 said:
When I put in a SD card with CWM it does not get pass cyanoboot logo. How have a CWM backup for my nook but since it can't load CWM I can't do any restore. Please help.
Click to expand...
Click to collapse
I was a bit hasty posting that, but now that I can see that you can see 'cyanoboot' logo, it appear that it does boot from sd card, just not a successful one. So, at least it seem the bootloader partition on the nook isn't corrupt. So, I'm pretty sure trying a diff card should work. We have at least a few people confirming to have similar problem after running CM10.1 on the HD+.
someone0 said:
I say you can try put CWM on diff card and try booting off diff card. At least that's one last thing you haven't try. Still, that's not gonna fix your stock nook, unless you made a backup.
I was a bit hasty posting that, but now that I can see that you can see 'cyanoboot' logo, it appear that it does boot from sd card, just not a successful one. So, at least it seem the bootloader partition on the nook isn't corrupt. So, I'm pretty sure trying a diff card should work. We have at least a few people confirming to have similar problem after running CM10.1 on the HD+.
Click to expand...
Click to collapse
He said he had a backup. But even if he did not, and he got a new CWM SD to work, he could flash my plain 2.0.0 stock zip linked in my HD/HD+ CWM thread.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
He said he had a backup. But even if he did not, and he got a new CWM SD to work, he could flash my plain 2.0.0 stock zip linked in my HD/HD+ CWM thread.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
I tried making another SD from the image that was proven to work before. The result is the same. See the logo and it stops there.
Zxa329 said:
I tried making another SD from the image that was proven to work before. The result is the same. See the logo and it stops there.
Click to expand...
Click to collapse
Still sounds like a hardware failure to me.
Sent from my Nook HD+ running CM10 on Hybrid SD
Have you tried booting while the USB power plug in?