I converted to EXT4 for a few day. MaDaCo Kernel r3 + Overcome 1.02 rom.
I want to convert back to RFS Rom. so I flashed ODIN 1.7 with JME.tar(it's signed)
already "wiped data/factory reset","wipe cache partition" on recovery screen.
Now i've got samsung logo boot loop and error message on Recovery
update medai, please wait
E: Can't mount /dev/block/st110 (Invalid argument)
E: copy_dbdata_media:Can't mount DBDATA:
you storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed.
issue was solved.
Solution: flash with Roto-JMEv4 FULL with P1_and_hidden.pit + Re-Patition
After done,reboot with up+power.
many thanks : bpt888,fastcx
u3819013 said:
I converted to EXT4 for a few day. MaDaCo Kernel r3 + Overcome 1.02 rom.
I want to convert back to RFS Rom. so I flashed ODIN 1.7 with JME.tar(it's signed)
already "wiped data/factory reset","wipe cache partition" on recovery screen.
Now i've got samsung logo boot loop and error message on Recovery
update medai, please wait
E: Can't mount /dev/block/st110 (Invalid argument)
E: copy_dbdata_media:Can't mount DBDATA:
you storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed.
I can't not flash with custom kernel and rom anymore coz now it's all signed.
anyone please Help.
Click to expand...
Click to collapse
Have you tried to put in pit file and checked repartition? this will wipe the phone
fastcx said:
Have you tried to put in pit file and checked repartition? this will wipe the phone
Click to expand...
Click to collapse
Yes.
ODIN 1.7 (windows 7)
Checked Re-Partition
PIT file : P1_and_Hidden.pit
PDA : JME.tar (download from fus.samsung)
does it need csc and phone file or other pda file?
u3819013 said:
Yes.
ODIN 1.7 (windows 7)
Checked Re-Partition
PIT file : P1_and_Hidden.pit
PDA : JME.tar (download from fus.samsung)
does it need csc and phone file or other pda file?
Click to expand...
Click to collapse
I would try using Roto-JMEv4 FULL. Use the P1_and_Hidden.pit and flash that together with repartition ON. That JME.tar I think is incomplete. My friend tried it before and it crapped out on him. After which, clear the cache and factory reset from Recovery mode to make sure everything is clean during boot.
bpt888 said:
I would try using Roto-JMEv4 FULL. Use the P1_and_Hidden.pit and flash that together with repartition ON. That JME.tar I think is incomplete. My friend tried it before and it crapped out on him. After which, clear the cache and factory reset from Recovery mode to make sure everything is clean during boot.
Click to expand...
Click to collapse
Most certainly works. I done it myself
Sent from my GT-P1000 using Tapatalk
Have you tried flashing Paul O'Brians rfs kernal and then flashing one of the other roms. As the kernal you have installed/flashed is ext 4 only. You need his rfs kernal to auto convert back to rfs. He links to it in his kernal post.
Hope this helps
Phil
Sent from my GT-P1000 using Tapatalk
diigibio said:
Have you tried flashing Paul O'Brians rfs kernal and then flashing one of the other roms. As the kernal you have installed/flashed is ext 4 only. You need his rfs kernal to auto convert back to rfs. He links to it in his kernal post.
Click to expand...
Click to collapse
do you have a link to that kernal
hye im new here,
just got my g-tab(malaysia)flash wit roto jme v4 using odin3 1.7 yesterday..
but i cant my 3g/hsdpa/edge..it just the bar,did check the apn stuff..tried to find other modem addon..
even tried addon modem.tar or sumthin..but still no sign of it..tab can call but cant even get a single data..help me.
Great help on MY P1000!!!!!!!!!!!!
Thanks a lot LOL~
Do you know how to go RFS stock rom from EXT4 on I9000?
Related
i used speedmod-kernel-vI1_1-250hz-CWM on my galaxy s gt-i9000 and then i tried to flash it with a different kernel once i did this phone started to hang on the galaxy s screen.after that i flashed it with xxjpo using odin and when it was finished it rebooted to recovery i get the message
update media please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions.
copy default media content failed
then when i rebooted it from recovery the boot animation appears with the sound then after a while the screen goes blank.then the thing starts vibrating.help me to get this fixed guys.
lesithdx said:
i used speedmod-kernel-vI1_1-250hz-CWM on my galaxy s gt-i9000 and then i tried to flash it with a different kernel once i did this phone started to hang on the galaxy s screen.after that i flashed it with xxjpo using odin and when it was finished it rebooted to recovery i get the message
update media please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions.
copy default media content failed
then when i rebooted it from recovery the boot animation appears with the sound then after a while the screen goes blank.then the thing starts vibrating.help me to get this fixed guys.
Click to expand...
Click to collapse
did you have a lagfix enabled beforehand?
no speedmod is the first one
lesithdx said:
no speedmod is the first one
Click to expand...
Click to collapse
not kernel, lagfix. did you enable a lagfix in the speedmod kernel?
yeah i had the rfs converted to ext4
lesithdx said:
yeah i had the rfs converted to ext4
Click to expand...
Click to collapse
then that's what caused it. you should have disable your lagfix before flashing the new rom. i'm not 100% sure on this but i think you need to do a factory reset and reflash and repartion. maybe some more knowledgeable could answer that one though.
Maybe Ur other kernel not support ext4 filesystem.
reflash speedmod kernel and disable lagfix then flash Ur other kernel.
I've had the same problem. The pit file I used was wrong. I was using 513 instead of 512. Try reflashing eclair. And make sure the region is the same.
i disabled the lagfix before flashing the new kernel...anyway guys i got is sorted finally...i repartitioned and flshed XXJPO using odin...thank god it worked...thank you all for caring
lesithdx said:
i used speedmod-kernel-vI1_1-250hz-CWM on my galaxy s gt-i9000 and then i tried to flash it with a different kernel once i did this phone started to hang on the galaxy s screen.after that i flashed it with xxjpo using odin and when it was finished it rebooted to recovery i get the message
update media please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions.
copy default media content failed
then when i rebooted it from recovery the boot animation appears with the sound then after a while the screen goes blank.then the thing starts vibrating.help me to get this fixed guys.
Click to expand...
Click to collapse
Wipe data/cache
lesithdx said:
i disabled the lagfix before flashing the new kernel...anyway guys i got is sorted finally...i repartitioned and flshed XXJPO using odin...thank god it worked...thank you all for caring
Click to expand...
Click to collapse
I'm in the same boat. Is there any way you can help me?
I've flashed xxjpo using odin but still have the issue.
First, I set up the PIT using 512. Repartition, auto reboot a f restart all checked, the two below, not checked. Connect the phone, run it, disconnect the phone, pull battery, start into download mode again.
Next, I flash the pda with the xxjpo firware from the stock firmwares section here. I unchecked repartition, but left the other two, and I'm back at square one. Is there any way you can walk me through how you got back to a booting OS?
hi everyone...
desperately need help about my sgs...
i had js8 froyo and speedmod kernel 13 on my sgs.
i decided to go on gingerbread and install jvh with odin 512 pit re-part. checked
after that my tel didnt respond and on recovery mode it says
update media plesa wait
cant mount /dev/block/st110
(invalid argument)
e:copy_dbdatamedia:cant mount dbdata
your storage not prepared yet.please use UI menu for format and reboot action
copy default media content failed
recovery turned 3e btw.
i completely dont know what went wrong.
Need help!
Thank you
You have a gingerbread bootloader installed?
Any active lagfixes?
I had a similar issue after moving from cm7 back to stock-rom. This worked for me:
* flash only the .pit (no pda) with repartition ticked.
* go to downloadmode again and flash the rest (without repartition ticked).
Hi all
I have the Bell Samsung Galaxy S I-9000
I think I screwed up my phone by trying to put to an update the CSC using Odin
After rebooting, it was always rebooting to the recovery mode.
when I reboot the phone, the boot animation will come up but when it will try to go into the OS my phone will shake and my screen will go black and will shake every 10 sec
I tried to restore my phone with the previous Rom that I saved but no luck.
Tried to reflash with Odin the stock firmware but no luck
I found something on the forumt to use Odin and click the re-partition and have the 512 Pit file and reflash the rom but didn't work.
And also when I flash the stock rom it will reboot in recovery mode and give me this error message:
Update media, please wait
e:Can't mount /dev/block/stl10
(Invalid argument)
e:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet. please use UI me nu for format and reboot actions
copy default media content failed
=========================
Also I have tried to format the internal memory too and wipe data/cache
is their any other suggestion that you guys can suggest to do
Thanks
Paco
AHHHH false alarm I did something else and it worked
I did a flash with rom + pit + modem + CSC and I have put the option re-partition and the other 2 option in Odin
and now no more black screen
I think I've made a fairly large mistake going from MIUI to Darkys.
I was on MIUI v3 (based on CM7) for a short while, but wanted to try something else. I chose to try Darky's v10.1.
I opened ODIN, and chose to flash a 512 pit along with Ficeto's JVH rom (in accordance to this guide). After doing this, my phone is stuck in a bootloop of showing Samsung Galaxy S GT-i9000 screen.
I can still access Download Mode, and my Recovery Menu is very limited (restart, wipe/factory reset, wipe cache partition). I've tried all of those but am not sure what to do to get my phone back on its feet again.
Any help is greatly appreciated!
Download any stock firmware or EZBase.
I have a stock Froyo ROM (Full UGJH2 including SBL) that I tried flashing with a 512 pit but it is still stuck in a boot loop. Actually, now it is showing the Galaxy S GT-i9000 white lettering, then turning off completely.
I fear that I have forgotten to disable the lagfix before flashing with ODIN, however, I never applied one...unless it is applied by default, and has to be specifically removed.
After flashing Ficeto's JVH I get this info in Recovery 3E...
Reboot system now
Apple Update from SD card
wipe data/factory reset
wipe cache partition
-- Copying media files...
E:failed to mount /sdcard (file exists)
E:copy_dbdata_media: Can't mount /sdcard
your storage not prepared yet, please use UI menu
for format and reboot actions
--Wiping data...
Formatting /data...
E:format_volume:rfs format failed on /dev/block/mmcblk0p2
Formatting /dbdata...
Formatting /cache...
Deleting Meta Data
Data wipe failed
Click to expand...
Click to collapse
Your probably best to go to the Ezbase thread(just search it), download the 3 files for either 2.0(Froyo) or 3.0(GB) depending on what you want, the Ezodin and Ezpit, flash using the guide there and start fresh. Let me know if it works!
Thanks for the recommendation! I've made some progress in Flashing EZbase 2.2.
When I try to reboot the phone however, I am still stuck in a boot loop of white Galaxy S GT-i9000 letters.
I now have access to an advanced recover menu ClockworkMod Recovery v2.5.1.0 SOK ULFK. I've checked my lagfix options, all of them say ENABLE LAGFIX: Convert to xxxxxxxxxx. I'm assuming this at least means that none are currently ENABLED, as I don't have the option to disable any of them. I'm looking at an option called CONVERT, where I can choose to convert my filesystem....Should I select one of the following?
Convert to EXT4
Convert to JFS
Convert to EXT2
Convert to RFS
When I try to access Install ZIP from SD Card it tells me E:Can't mount /dev/block/mmcblk0p1 and E:Can't mount /mnt/sdcard . Is this the source of my problems?
Well, I've been flashing various combinations of pits and roms for the past 3 or 4 hours. I'm not exactly sure what did the trick, I was not able to mount or format my internal SD at all. But, after several attempts at the EZBase ROM, followed by trying to flash to 2.1, finally worked. I got into my UI in 2.1, poked around for a second, and then flashed to Ficeto's JVH which worked.
I've now wiped the device and installed Darky's 10.1 JVH successfully. I wish I had a more detailed answer to how I did it exactly, it was quite a crap-shoot
Nice to see you got it going, don't know why EZbase didn't work straight away.
I have rooted froyo 2.2 now. had ics( long story). cannot access download mode and recovery. installed app to get into recovery. cannot install zip files. having :
"E:Can't mount /dev/block/mmcblk0 (or /dev/block/mmcblk0p1)
(Device or resource busy)".
all this on internal sd card.
what can i do to fix this?
thanks.
reflash with pit file and repartition.
Make sure that you use a complete rom
there is no download mode. three button combo is not working.
how can i get into download mode in any other way ???
when i flashed i did it with 512pit and with repartition.
iParadiz said:
there is no download mode. three button combo is not working.
how can i get into download mode in any other way ???
when i flashed i did it with 512pit and with repartition.
Click to expand...
Click to collapse
USB Jig will get the phone into download mode
Does your phone turn on? If so you could try mobile odin from the play store. I've never used it but it might work for you.
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Still has a problem
used jig. flashed stock firmware. after reboot i'm getting:
--Deleting files...
E:failed to mount /dbdata (File exists)
E:deleye_data_files:Cant mount /dbdata
your storage not prepared yet. please use UI menu for format and reboot actions.
--Updating filesystem...
E:failed to mount /dbdata (File exists)
E:deleye_data_files:Cant mount /dbdata
--Wiping cache...
Formatting /cache...
Cache wipe failed.
--Appliing Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/KOR/system/'.
Successfully applied milti-CSC.
---------------------------------------------------
and the phone is bootlooping. what's wrong?????
is the internal sd card has a problem ???
iParadiz said:
used jig. flashed stock firmware. after reboot i'm getting:
and the phone is bootlooping. what's wrong?????
is the internal sd card has a problem ???
Click to expand...
Click to collapse
Try a different stock ROM any will do maybe even Darky's 10.2 That helped me when i had a similar issue.
If that fails the internal memory could have failed....
Nice!!!
finally installed Extraordinary 9.1. very smuth. amazing !!!
thanks for the help.
P.S. when trying to use the jig on sg i9000 it should be exactly 301k!!!!!!!!!!!!
i bought resistors for 300k. one was 309.1k and another 303.5k. it didnt worked!!!
i used 6 resistors in parallel to get 301.1k only then i got into download mod.
Try this... http://forum.xda-developers.com/showthread.php?t=984140