[Q] Tried to downgrade to recovery2e, now stuck at galaxy s logo - Galaxy S I9000 Q&A, Help & Troubleshooting

Dear All,
Have tried searching for a solution to my problem, was unable to find one - apologies if this has already been answered somewhere.
My Galaxy S has never been able to use the 3 button recovery/download, so when I wanted to install a custom ROM, thought it would be a good idea to fix that
First I went to RazvanG's thread here , and realised I needed to sort some other issues first, namely to root and downgrade my recovery file from 3e to 2e.
These are the steps i followed:
1. Rooted using z4Root
2. Installed Busybox
3. Followed steps in reschi85's thread here
4. Rebooted
All seemed fine when I rebooted, phone started fine.
However, when I then went to the next step of RazvanG's, namely to boot into recovery, the phone has hung on the Galaxy S logo screen, and will not budge.
Have tried using adb to reboot into download/recovery mode, no change. cannot get the phone to start now, and since I hadn't managed to get the fix applied, my 3 button fix will not work.
Please help!
Thanks in advance,
Sun

Petr0v has an excellent topic on getting 3 button recovery working. I used the odin method and it takes 5 minutes in all. You actally have to get download mode working first before anything as its very important. Once done you could have flashed cf root using odin and would have had 2e.
If taking out the battery for a few minutes doesn't work your only option will be to force it into download mode using the jig then flashing a fresh firmware with odin. There are topics on here on making your own homemade jig. I've also seen them selling on ebay here in Australia for $20usd. Good luck.
Edit: TheBeano has a topic on how to make you own jig.
Sent from my GT-I9000 using XDA App

Related

[Q] ROMs Not Flashing After Kernel Flash

Okay, so I have installed Speedrom kernel earlier, then tried to flash ICSSGS, and after it restarted the phone, it went to the Samsung Captivate logo. I reflashed Speedrom via Heimdall. Once it restarted I continued into reflashing ICSSGS from CWM. It continued installing, and I selected the options I wanted (I tried both kernels, to no avail). After it said it was done and restarted I was greeted by the Samsung Captivate logo. I have been stuck here ever since.
I was running I897UCKB2.
I can access download mode, recovery, I can flash new recoveries and new roms. However no roms actually flash. I have searched all over and can not seem to find anyone with exactly the same results. Maybe I am searching the wrong terms.
I have tried Kies, but can not get into the phone, so I can not use it. I have tried odin3 1.7, I have also tried several odin one click setups, all of which connect to the phone, and attempt to install, 2-3 hours later, or even 8 i come back to it still frozen. When I restart the phone I am stuck at the /!\ screen. using the UnBrickable mod, I can get it back into recovery, I can not get it to go any other way besides UnBrickable Mod.
I also can not access ADB or fastboot, it is always waiting on the device.
I am at a complete lost here. Tomorrow I plan on launching Ubuntu and seeing if I can fix the issue.
Does anyone know why the ROMs are ot flashing correctly?
edit: I should add that after attempting to install ICSSGS my phone is no longer recognized at i897 and incapable of installing CM9. After changing the build.prop I am still unable to get it to recognize. As of now attempting to install CM9 installs CWM 5.5 and reboots, and then never does anything.
Try using nexus drivers on ur pc.
Then if u can get into download mode, flash to stock of ur choice and then use TRusselo's Guide, that is stickied in the Q & A forum, to proceed further.
U can use the /!\ screen as a download screen.
Sent from my SAMSUNG-SGH-I777 using xda premium
I woke up this morning with it still stuck at Firmware upgrade. My computer went to sleep during the night.. Thought I had turned it off. Luckily it looks like when I turned it on, Odin One-Click for 2.1 started up and started flashing it. Phone restarted and actually appears to be doing something.
So I guess Flash Odin Twice?
4-2ndtwin said:
Try using nexus drivers on ur pc.
Then if u can get into download mode, flash to stock of ur choice and then use TRusselo's Guide, that is stickied in the Q & A forum, to proceed further.
U can use the /!\ screen as a download screen.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
As for Trusselo's Guide, its the one I followed
http://forum.xda-developers.com/showthread.php?t=1350266
Doesnt flash ROMs for me. I tried it again in Ubunutu. It is a no go. I am not as experienced as I'd like to be flashing, but its not a hard process, So I am very unsure as to whats going on that flashes are not working. Well ROM flashes at least, I now am running, Eclair 2.1-update1. I am going to try to flash a new bootloader, the e2 and see if I can maybe get around the issue I am having.
Not sure why things are not going good for u according to TRusselo's Guide...??
Be sure and read plenty before u flash. Know what u r doing and the risks. Newer Stickied Threads in the Captivate Forums r ur friend.
I tried flashing a few more times, and got nothing. I began to give up, but last second tried installing CM9 Nightly, it went through finally. Haven't done anything different. I checked the videos I recorded to see if I had did anything different. Only Difference is flashing the bootloader twice before running CWM to install CM9.
Glad that nightmare is over. Girlfriend should be very excited that it is working. Now if I only had a 100% Sense free and 100% working ICS for my Amaze.
Thanks for your help.
Glad u got it going. Thx for reporting back.
Sent from my SAMSUNG-SGH-I777 using xda premium

Bricked captivate help please!!

i have bricked my step dads captivate. i put Cyanogenmod 9 on his phone he has been using it for a while now but he wanted to go back to the stock rom that came on the phone. i made a back up before i installed cm9 but when i was restoring it back to stock it said error restoring boot image then stopped so i tried it again the it went black. now every time i try to turn it on it gets stuck at the at&t world phone screen and wont do anything. so i made a jig to get it into download mode so i could flash it back to stock. but now on my widows 7 computer it says usb device not recognized. it gives a error code 43, and says device has malfunctioned. i have uninstalled the drivers and reinstalled them but the same message keeps popping up. i don't know what to do now im all out of ideas and i cant find anything that relates to my problem anywhere on the internet. please someone help me!!!
See the Captivate Connection Issues and Download Mode Help stickied thread in the General Forum.
Also u could try one of the Heimdall One Clicks instead of Odin.......see the stickied thread in the Dev Forum of the Master Collection of Stock Rom One Clicks.
Sent from my SAMSUNG-SGH-I897 using xda premium
No one tells you that you can't restore a factory image from CWM... but as you have seen, you can't. :thumbup:
Sent from my aokp_tenderloin using xda premium
seen this just few days back.... if you get stuck at the at&t screen, phone is soft-bricked and you dont need a jig to solve that problem.
I was under similar impression first, then read a post about a ROM installation and found out that to get to download mode, you can hold both the volume buttons and connect the phone to the usb with computer (phone initially is turned off) ... dont press the power button... this will give you download mode.... once in download mode ODIN to stock, root, flash to any ROM that you like by carefully following the instruction to "T".
i couldn't post outside link but look for captivate wikia download mode on google. it will give you a site with all options of bricked phone and solutions.

[Q] Any way to get recovery mode to work? DL mode works, Recovery does not.

I have searched for the last 24 hours on this site for any mention of this problem and found nothing. I apologize if it has been covered elsewhere and would appreciate a link if I should be there instead of here. I am new to this forum.
I have an AT&T Captivate that I bought used for my wife. It was rooted and running some version of non-official Gingerbread when I got it (so it had been messed around with).
I have never been able to get into RECOVERY mode having tried every conceivable button and timing sequence at least 1 million times (3-button neutered?). I also have Android SDK installed on my PC and can send the "adb reboot recovery" command but it locks up at the AT&T screen and won't go any further so the PC is talking to the phone but the phone refuses to obey. Yes I have tried different USB ports and cables, un/reinstalling drivers, etc. The weird thing is that I can get into DL mode easily with the batt out, vol+/-,USB cable trick.
I originally took the phone all the way back to a stock Froyo ROM via Odin which appeared to work fine (but still no recovery mode) and then flashed to GB 2.3.5 with Kernel 2.6.35.7-I897UCKK4-CL614489 via "kh3_heimdall_cwm-One-Click_GB_2_3_5.jar"
Phone works OK now but I still can't get into RECOVERY mode. Unless I am mistaken, there are no ROMS available later than GB that can be flashed via Odin- all of the later ROMs need to be installed from recovery mode. The point of all this is that I want to try upgrading to ICS or JB but can't figure out how to do it without a way to get into recovery mode.
So the question is: How can I get recovery mode to work?
And: How can I update the ROM with no way to get into Recovery mode? Is it even possible?
Returning the phone is obviously out of the question as it is "obsolete" and I am not the original owner.
Thank you for any helpful insights.
captivated hippo said:
I have searched for the last 24 hours on this site for any mention of this problem and found nothing. I apologize if it has been covered elsewhere and would appreciate a link if I should be there instead of here. I am new to this forum.
I have an AT&T Captivate that I bought used for my wife. It was rooted and running some version of non-official Gingerbread when I got it (so it had been messed around with).
I have never been able to get into RECOVERY mode having tried every conceivable button and timing sequence at least 1 million times (3-button neutered?). I also have Android SDK installed on my PC and can send the "adb reboot recovery" command but it locks up at the AT&T screen and won't go any further so the PC is talking to the phone but the phone refuses to obey. Yes I have tried different USB ports and cables, un/reinstalling drivers, etc. The weird thing is that I can get into DL mode easily with the batt out, vol+/-,USB cable trick.
I originally took the phone all the way back to a stock Froyo ROM via Odin which appeared to work fine (but still no recovery mode) and then flashed to GB 2.3.5 with Kernel 2.6.35.7-I897UCKK4-CL614489 via "kh3_heimdall_cwm-One-Click_GB_2_3_5.jar"
Phone works OK now but I still can't get into RECOVERY mode. Unless I am mistaken, there are no ROMS available later than GB that can be flashed via Odin- all of the later ROMs need to be installed from recovery mode. The point of all this is that I want to try upgrading to ICS or JB but can't figure out how to do it without a way to get into recovery mode.
So the question is: How can I get recovery mode to work?
And: How can I update the ROM with no way to get into Recovery mode? Is it even possible?
Returning the phone is obviously out of the question as it is "obsolete" and I am not the original owner.
Thank you for any helpful insights.
Click to expand...
Click to collapse
Since you have no problems getting into download mode I suggest you start by going to this link... http://forum.xda-developers.com/showthread.php?t=1300843 Go to the third post and download the Odin one click of KK4 with bootloaders.
After you do the one-click back to stock go to this link... http://forum.xda-developers.com/showthread.php?t=1294477&highlight=corn+kernel and get the odin flashable version of 7.06 or 7.0A and if you don't already have Odin you'll of course need that too. Get yourself back into download mode and flash that kernel and it should give you back your recovery via the 3 button combo.
Worked! (eventually...sort of...)
m1batt1 said:
Since you have no problems getting into download mode I suggest you start by going to this link... http://forum.xda-developers.com/showthread.php?t=1300843 Go to the third post and download the Odin one click of KK4 with bootloaders.
After you do the one-click back to stock go to this link... http://forum.xda-developers.com/showthread.php?t=1294477&highlight=corn+kernel and get the odin flashable version of 7.06 or 7.0A and if you don't already have Odin you'll of course need that too. Get yourself back into download mode and flash that kernel and it should give you back your recovery via the 3 button combo.
Click to expand...
Click to collapse
m1batt1,
Thank you sooo much! It ALMOST worked!
- DL'ed Odin 1-click KK4 w/BL's as suggested, ran it, it failed and semi-bricked my phone... (phone--/!\---comp). Doh!
-Figured you were on the right track so DL'ed "I897UCKK4 Odin One Click - Stock, CONTAINS Bootloaders, Re-partition, Full Wipe" from 4-2ndtwin's post further down the same thread.
-after much anxiety and messing about to get it to connect, it successfully flashed!
-For the FIRST TIME EVER, I can get into recovery mode!
-followed up with corn kernel 7.06 as suggested with no problems
-now that the phone works as advertised, time for JB!
The funny thing is, I went back to stock ROMs several times and recovery never worked until now... go figure...
^
...then it had to be that KK4 one click in that 3rd post that fixed the prob.
Sent from my SGH-I897 using xda premium
I'm glad it got you back up and running! Now get your JB flash on! There are plenty to choose from for our "ancient" captivates.
One word of advice though. Coming from the point you're at now any JB ROM you flash will likely knock you into a boot loop on the first flashing attempt. Nothing is wrong just three button into recovery and flash again.
Sent from my SGH-I897 using xda app-developers app
And back up the efs folder, just in case.
It contains the vital IMEI info. :thumbup:
Sent from my SGH-I897 using xda premium
Thanks a million guys! Slim bean 2.9 up and running!
It Works!
Got to Slim Bean 2.9 through Cyanogen 9.1 and installed the Slim_GApps.
4-2ndtwin: Thanks for the suggestion to back up the efs folder. I hadn't done that before and now I am feeling VERY lucky that my phone still works at all! It lowered my stress level appreciably plus it was good practice using SDK.
m1batt1: Thanks for the heads up on the double flashing of JB ROM! It saved considerable unnecessary panic (although it was still somewhat unnerving)!
Consider both your thank you buttons righteously whacked! :good:

[Q] What to do when I soft brick.

I was installing the DA Statusbar mod. Before I did that I back up my phone using CWM and Titanium Backup.
installed with no problems, I then rebooted. Home screen froze for a second and then showed me that my system.ui crashed. It kept doing that for a good 5 minutes. I decided to go back into CWM and restore my last saved state. I recieved an error installing the back ups (I have made 5 so far).
Now I don't really know what to do. I know I have to basically start from the beginning via flashing stock rom on odin. But how would I go about doing that? I can't seem to find the thread that explains this. =/
Thanks in advanced
SOLUTION HERE
You need to be much more specific. What's your recovery version? How did you backup/restore? Have you done this before? What's the error?
Use the unified tool kit to flash the stock rom.
I strangely cannot find a thread for the 9305 for stock roms =\
The stock firmware can be found on sammobile
Sent from my GT-I9305 using xda premium
To shorten the question and answers... If you could still boot to Download mode.
Flash your stock original firmware trhu Odin on your pc or download an exact model for your phone in SamMobile. From there you start a new... Root then re flash the cwm and so on...
If I understand this right you can boot to cwm and you can boot into the phone but the systemui fcs.
You can do a couple things here without having to reflash anything through odin. If you have your original systemui on the phone somewhere you can try and navigate to it with a root explorer then copy it into your system/app reboot and it should be as before, this can be tricky with constant fc's.
If you have a zip which has a systemui in it you can flash that in cwm and should fix the problem.
If you have a custom rom on your phone you can boot into cwm and flash it.
The fact that you have access to cwm and the phone boots but the systemui constantly fc's making the phone unusable means you have more options and quicker ways to get your phone working then going back to scratch and flashing a rom through odin
Sent from my GT-I9305 using XDA Premium HD app
Solution.
Basically I got stuck at the samsung boot logo for ages.
I am running CWM v5.5.0.4. I have done this before, sorry I wasn't specific, I was trying to multitask. I've attached a screenshot of my phone info for everyone to see.
1. I wiped data/factory reset.
2. Wiped cache partition.
3. Wiped Dalvik Cache
4. Battery Stats
Rebooted, still no luck.
I went into Download mode.
Opened Odin.
Downloaded " Param_Bin_I9305.zip - 612.14 KB" located in this post
Followed the instructions in that post.
rebooted.
Thought it didn't work but my capacitive buttons lit up. SUCCESS!
Saw my homescreen, I thought I would have needed to root again but I managed to get into CWM after rebooting.
I downloaded root checker....I saw that I still had root access.
Installed Pandoriam v6.
Now I am back to normal.
My CWM backup didn't save me, I don't really know why. Maybe I was using it wrong? The thing is It's worked with me in the past, but not on this device.
Is there anyone that could shed light on that issue? I'll try and back it up again. Do I need to repeat the backup more than a few times to register it to the device?
Not sure if this is the right place or not but seems to be a similar situation.
I have a month old S3 LTE that came with 4.1.2 . It has not been rooted or had anything done to it at all.
I found a thread that shows you how to unlock it but was not getting the final option . This I understood was because some of these phones needed to be downgraded .
I saw a procedure using odin and looked for a similar rom on Sammobile but could not see any for Orange UK so picked a random 4.1.1 Rom and flashed it.
This left me with a glowing Samsung boot screen so I tried another ROM and another ROM and finally when giving up choose a current 4.1.2 Rom for EE but that too is stuck at the same place.
Can you help me work out where I am or have been going wrong please?
The Phone is from Orange UK ( EE ) but there was no branding on it .
i also neglected to note the Rom that was on it
if you read the guides you will find out that you need to factory reset after flashing
Unfortunately as the phone is sitting at a glowing Samsung logo, I cannot factory reset. In fact I cannot do anything except keep throwing Roms at it, unless you have any other suggestions?
Sent from my GT-I9100 using xda premium
You can't get into recovery by pressing volume up, power and home?
Sent from my GT-I9305 using xda premium
did you try pulling your battery then trying recovery mode?
Sent from my GT-I9305 using xda app-developers app
thx natthewife
Pulled the battery . held volume up and home and dropped the battery in . Straight into recovery . ! All done now . Can hand over to my son so he can scratch it up drop it down the toilet or lose it on the bus . !
thx again

[Q] HELP ME unbrick samsung galaxy S i9000 please! nothing works- kies,odin,adb,

Hi,
I am sorry to post this topic but i badly need some experts to help me out with this. It would be very grateful if anyone of you could help me.
I have bricked my friend's samsung galaxy s i9000. Now i need to buy a new phone for her incase i dont get this one working.
I have searched on this forum and googled extensively, i tried almost every method on this forum to unbrick except the USB jig, all of them failed.
I have ordered USB jig online, and it is yet to be delivered to me. So that method is yet to be tested.
Meanwhile all i want now is some guidance, so that i could be self assured if what I am doing is right and i need some questions answered.
Please read the following to comprehend the entire problem.
1) The phone has froyo and it was working very slow, and i couldnt boot into download or recovery mode via 3 button combo. (why couldnt i boot into those modes?)
2) I connected the phone to samsung kies, and it said that there is an upgrade available. But the details for the upgrade were blank.
I went ahead and tried upgrading it, and it gave me 403 error. (why did it give null details of the upgrade firmware? and why did i get 403 forbidden access error? )
3) Next i connected to the phone via ADB, and i could successfully boot into download mode.
4) After booting into download mode, i connected it to odin. Then i tried flashing semaphore kernel v2.7.
I gave an error, write operation failed, and the flashing failed. (why did it happen?)
5) Next I couldnt boot the phone at all, I am stuck at the black screen of death aka bsod or the phone-!-computer screen.
6) I tried taking out battery, reinserting and tried severl combination of button to boot as explained at several places here, but none of them works. Neither am i able to connect it to odin, or adb.
WHAT SHOULD I DO NOW? IS IT HARD BRICKED OR SOFT BRICKED?
WHAT SHOULD I DO INCASE I AM ABLE TO BOOT INTO DOWNLOAD MODE USING USB JIG?
WHAT SHOULD I DO INCASE I AM NOT ABLE TO BOOT INTO DOWNLOAD MODE USING USB JIG?
Please help me, it will save me a new phone cost. I can hardly afford it.
http://forum.xda-developers.com/showthread.php?p=30415128 follow the link it may help
Sent from my GT-i9000 using xda premium
I have already tried all this.
can you answer my questions?
http://www.youtube.com/watch?v=1RoZU5ZPMS4&list=UUawwqTCK5egDfXdJe3EH0XQ&index=13
http://www.youtube.com/watch?v=pKS6zEkIydM&list=UUawwqTCK5egDfXdJe3EH0XQ&index=14
http://www.youtube.com/watch?v=PwHVm90HO1w&list=UUawwqTCK5egDfXdJe3EH0XQ&index=18
http://www.youtube.com/watch?v=6GJUcQl3wr8&list=UUawwqTCK5egDfXdJe3EH0XQ&index=16
if your still stuck check out darkyrom.firstaid
http://forum.xda-developers.com/showthread.php?t=819551 read this
a big thanks foe all above links..
I am still trying and waiting for the jig. i hope to get it working..
Was the phone rooted? I've had problems with rooted apps deleting system files.
Sent from my GT-S5830 using xda app-developers app

Categories

Resources