hi, just need the 3g file for the canadian telus milestone. i had the file it was like 3g_somethingsomething.zip but accidentally deleted it. i need it for 3G in the US. can anyone link me too it? ithanks in advance
http://dext3r.komodin.org/
Edit: basebands are also in open recovery 3.3 baseband foder.
Sent from my Milestone using Tapatalk
Related
H guys need some help. Just update my Galaxy S with both JM7 and then with JM8. I updated from my original Norwegian firmware I9000XWJFB/I9000SWCI9000XEEJG1/I9000XXJF5/I9000XWJFB. Problem is after the update I have only wifi connections. I am unable to get any 3G or Edge or any sort of mobile internet connection. I can still phone out etc. Just no mobile internet. I have tried flashing back to JF5, but I get some russian language and still no 3g. Any help would be appreciated.
I have also added Tayutama_Edition_Voodoo_Full_v1.1. But even without it still no 3G.
Currently : PDA:XWJM8 Phone: I9000XXJM4 CSC: OXAJM1 Not sure what that means.
I am in Norway if anyone knows of a firmware I can downgrade to or use in this region. Did not backup my original firmware.
Sounds like you need to set up your apn.
Sent from my GT-I9000 using XDA App
Google for your network providers APN codes, and then set them in settings.
Thanks guys got it working...reflashed the csc file with xee jm1. It worked. Man was I getting worried.
Sent from my GT-I9000 using XDA App
no 3g connection after upgrading to gingerbread for galaxy tab
Dont have 3g connection when i updated my tab from froyo to ginger
My network is singtel from singapore
please help me
email me asap thank you very much
Hello,
I recently had upgraded my GT-i9000T that came with JG7 2.1 to leaked version of 2.2 froyo but I've noticed it was not using 3G for data but instead only used EDGE which made my connection really slow.
I am trying revert back to original firmware but unable to locate the LATIN AMERICA version of the firmware GT-I9000HKTTTT [JG7]...
Does anyone know where to download the right firmware for my version or does anyone know how to enable 3G data to be utilize not just EDGE for data connection?
Thanks in advance!!!
I neede it too
please, pm me if u get the original GT-I9000HKTTTT. i need it too.
thank u
plucky1975 said:
Hello,
I recently had upgraded my GT-i9000T that came with JG7 2.1 to leaked version of 2.2 froyo but I've noticed it was not using 3G for data but instead only used EDGE which made my connection really slow.
I am trying revert back to original firmware but unable to locate the LATIN AMERICA version of the firmware GT-I9000HKTTTT [JG7]...
Does anyone know where to download the right firmware for my version or does anyone know how to enable 3G data to be utilize not just EDGE for data connection?
Thanks in advance!!!
Click to expand...
Click to collapse
[MOD] Radio SBFs N_01.95.00R (Retail SouthEast Asia) & CWM N_01.100.00R (Orange FR)
Here are some radios users recently requested:
N_01.95.00R
(from retail southeast asia .sbf here)
AT&T .sbf
International .sbf
N_01.100.00R
CWM file
can i flash 1.100 cmw on gb 4.5.91?
aleve1983 said:
can i flash 1.100 cmw on gb 4.5.91?
Click to expand...
Click to collapse
Untested, but think it should be fine.
work for me on att cherry 5d
eval- said:
Here are some radios users recently requested:
N_01.95.00R
(from retail southeast asia .sbf here)
AT&T .sbf
International .sbf
N_01.100.00R
CWM file
Click to expand...
Click to collapse
Thanks a ton for this!
You sir are awesome!
Can convert all to CWM?
This is what I'm looking for
Sent from my MB860 using XDA App
SEA users, does this improve the speed?
Great information, that's I need
Sent from my MB860 using XDA App
Hi,
Don't use the N_01.100.00R radio on the Bell GB firmware, it works but the speed is rather bad and sporadic. Think 300 baud modem for wifi and original ATT radio for uploads divided by 2.
Cheers!
use N_01.100.00R radio but in 3g always have 1 bar signal.
rom 4.5.91 att. how to fix this problem?
How do install the sbf? RSD? I know it's a noob question but I'm used to flashing img's and usg zips through CWM.
edit: Used RSDlite, and the AT&T radio only showed 1 bar. Speed was slower than the .30 radio in case anyone was curious.
I install through CWM.
sergey1977 said:
I install through CWM.
Click to expand...
Click to collapse
You installed the ATT SBF through CWM? How did you do that?
so im on a bell atrix running 4.5.91 and have downloaded both N_01.100.00R and the International and both are giving me only 1 bar? any ideas?
CWM file
I use the CWM file in the head of topic
Ya i tried that and still one bar...weird huh?
Try this.... http://forum.xda-developers.com/showthread.php?t=1159505&highlight=radio
Or here for international: http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1185171&v=1&libid=1312097780208&out=http%3A%2F%2Fwww.4shared.com%2Ffile%2Fod3GDWX8%2FCWM_INT_Recovery.html&ref=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1192340%26highlight%3Dbell%2Bradio&title=%5BMOD%5D%5BCWM%5D%5BBell%5D%5BGobstopper%5D%20Stock%202.2.2%20for%20Bell%20Updated%207%2F30%2F2011%20-%20xda-developers&txt=CWM_INT_Recovery.zip
From this thread - http://forum.xda-developers.com/showthread.php?t=1185171
Phoneguy589 said:
Try this.... http://forum.xda-developers.com/showthread.php?t=1159505&highlight=radio
Or here for international: http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1185171&v=1&libid=1312097780208&out=http%3A%2F%2Fwww.4shared.com%2Ffile%2Fod3GDWX8%2FCWM_INT_Recovery.html&ref=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1192340%26highlight%3Dbell%2Bradio&title=%5BMOD%5D%5BCWM%5D%5BBell%5D%5BGobstopper%5D%20Stock%202.2.2%20for%20Bell%20Updated%207%2F30%2F2011%20-%20xda-developers&txt=CWM_INT_Recovery.zip
From this thread - http://forum.xda-developers.com/showthread.php?t=1185171
Click to expand...
Click to collapse
cheers for the help!!! but i have actually tried the 4.5.91 radio from kenneth and i got errors on both fasboot and sbf method, as for the other thread i am happy with my gingerbread and that thread wants me to revert back to stock 2.2.2 froyo...lol
but again cheers for the response =)
i tried all radio only in 1.77.30 and 1.87.00 correctly shows signal strength in 1.95
1.97 1.100 1 bar
Friends,
Am Recently purchased a Captivate S i897. I am from India and using BSNL Network (900).Now my captivate Unable to connect to network. During network search only 1900 band networks are shown. I am tried severel modems . In some modem Signal bar rise to 2 bars and bsnl logo appears. But my samsung spica shows -81 db and captivate shows -103 db in same place.:crying: My Captivate is now running with slimbean .(In my motorola defy i am using a small application Named baseband switcher for switching basebands simply). I am noob to Captivate. Please help me friends.......
pradeeppk said:
Friends,
Am Recently purchased a Captivate S i897. I am from India and using BSNL Network (900).Now my captivate Unable to connect to network. During network search only 1900 band networks are shown. I am tried severel modems . In some modem Signal bar rise to 2 bars and bsnl logo appears. But my samsung spica shows -81 db and captivate shows -103 db in same place.:crying: My Captivate is now running with slimbean .(In my motorola defy i am using a small application Named baseband switcher for switching basebands simply). I am noob to Captivate. Please help me friends.......
Click to expand...
Click to collapse
You'll have to find a modem that supports 900 band (I think JK4 does but dunno how it works in India).
modem sticky in cap dev forum may be helpful - lots of replies in thread about what works and where.
http://forum.xda-developers.com/showthread.php?t=1227717
After some searches through the forum I found a modem suitable for India is DDJV5. But it is for i1900. So I need a i1900 kernel for DDJV5 modem. So my question is can I flash any i1900 over my i897 ? Or is there any suitable i1900 kernel for i897?
Thanks
Sent from my SGH-I897 using Tapatalk 2
Since you are runnin Slim Bean, you need to get your modem from here...http://soggycashew.weebly.com/cm7miui--ics-modems.html. The modems in that link are compatible for jellybean also.
That is all you need to do. No need to flash a kernel, etc.
Sent from my SAMSUNG-SGH-I747 using xda premium
Tried it. But no luck. The modems are for i1900. I heard that i1900 modem only work with i1900 kernel. So i am looking for a i1900 rom which suitable for i897. Only kk4 is give signal and it is less 15 to 20 db compared to other samsung phones.
Sent from my MB525 using Tapatalk 2
di you read the whole thread? after gb, with ics, cappys ran 9000 modems okay, not just Cappy modems.
Now i got some signals with kv2 and kk4 basebands. But during call voice quality is low and caller in opposite side hear eco of his own voice. Also flashed ddjv5 baseband but no network . During network search only airtel and docomo (both 1900 band) is shown
Sent from my MB525 using Tapatalk 2
pradeeppk said:
Now i got some signals with kv2 and kk4 basebands. But during call voice quality is low and caller in opposite side hear eco of his own voice. Also flashed ddjv5 baseband but no network . During network search only airtel and docomo (both 1900 band) is shown
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
There isn't much else you can do other than keep trying. Also, did you test your signal outside?
pradeeppk said:
Now i got some signals with kv2 and kk4 basebands. But during call voice quality is low and caller in opposite side hear eco of his own voice. Also flashed ddjv5 baseband but no network . During network search only airtel and docomo (both 1900 band) is shown
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
U gotta use the modems from the link i posted in my previous post, because u r runnin a jb rom or u will have call issues.
Sent from my SAMSUNG-SGH-I747 using xda premium
Is it do any harm during overwrite modem.bin from the zip to radio folder . if it is possible I only need to extract each modem zip to separate folders and overwrite the modem.bin in radio folder and a single reboot.
Sent from my SGH-I897 using Tapatalk 2
pradeeppk said:
Is it do any harm during overwrite modem.bin from the zip to radio folder . if it is possible I only need to extract each modem zip to separate folders and overwrite the modem.bin in radio folder and a single reboot.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Pradeep it's BSNL, now just leave it and port your number to any other network be it Airtel or Vodafone. As simple as that.
Sent from my SGH-I897 using xda premium
Many thanks dear friends. Finely i am settled with jk4 modem. Its working pretty good compared with other modem.
Sent from my SGH-I897 using Tapatalk 2
hi..i have installed cm10.1 in my cappy..im getting a signal with the modem that was included in the rom zip...but with this rom im not able to recieve calls..i can call msg and recieve msgs..but i cant recive calls....can anyone tell me whats the problem??
l2azoredge said:
hi..i have installed cm10.1 in my cappy..im getting a signal with the modem that was included in the rom zip...but with this rom im not able to recieve calls..i can call msg and recieve msgs..but i cant recive calls....can anyone tell me whats the problem??
Click to expand...
Click to collapse
three ideas-
check call settings for reject or forward all calls setting. also, check with at&t or your carrier.
are you using bluetooth headset? I've noticed that the dialer in 0327 build doesn't always recognize when the bluetooth headset is available. I have to change the setting to Bluetooth after dialing.
clear caches, then reflash the rom.
Hi all,
I have the Canadian model (Bell Mobility GT-P1000M) with rooted Froyo 2.2, and I would like to upgrade to JB CM10. I've been looking at some of the posts, so I'm informed, but I still have a few questions:
- If I'm doing a full install, do I need to patch the protected bootloader first (Page 3)?
- Which modem should I use, T-Mobile or AT&T? (or can I just pick one and then use the proper modem from the modem list sticky after?)
If you’re a North American T-MOBILE Tab user, look for the “T-Mobile Modem” folder and select the “modem.bin” file.
If you’re an AT&T (USA), TelCel (Mexico – if you’re not using the GTP1000L Tab) and Telstra (Australia) user, look for the “JK3 Modem” folder and select the “modem.bin” file. It doesn’t matter if you prefer another modem, you can flash another modem, once you’re done…
Click to expand...
Click to collapse
What I used for reference:
[ROM][2.3.6] Overcome Rom 4.1.0 new links
Priyana's post
Getting ICS on the Bell Mobility GT-P1000M
Thanks,
Vic.
You are on Froyo, so apparently you need to root and check if your bootloader is protected. If so, then patch.
Is bell using 850MHz for 3g? If so, you use at&t modem.
T-mobile modem only for t-mobile tab.
Jpz modem for the rest.
Sent from my GT-N7100 using xda app-developers app
priyana said:
You are on Froyo, so apparently you need to root and check if your bootloader is protected. If so, then patch.
Is bell using 850MHz for 3g? If so, you use at&t modem.
T-mobile modem only for t-mobile tab.
Jpz modem for the rest.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Thanks... I installed it using the AT&T and left it like that. I don't have a data plan for the tablet so I don't really care.