Related
Hey guys,
I've had my X1i for a year now. No hard falls most falls are on soft surfaces. & Suddenly today morning woke up & the touch screen isn't responding. So I looked up posts, some said turn it off & turn it back along with removing the battery & it should work fine. Tried that, worked for a bit then stopped working again. Also tried soft-reseting & gave the same result. So is there any other method you guys know ? I'm thinking the other type of reseting..forgot what it's called but that'll delete everything so i gotta back things up first. So any solutions? & thanks in advance.
Have you got a screen protector on it? If so, try lifting the edges of it a little.
Nope, no screen protector. Does it have to do with any .cabs i've installed before ? Or they're not related? Is the battery related? Could it cause something like that?
I once run into the following, it may help you too:
after installing an app(from a cab) my screen was allmost non responsive.
Calibration didn't help.
I have "Advannced config" installed, uppon checkin the sensitivity it was waaaaay down, even under default.
Hope it helps for you too =)
i had the same problem to on my proto x1
it completely stopped working and i tried everything (reflash rom, boot android)
but all without luck so i bought a replacement screen
after a while my touch screen started working again but still occasionally fails
i have not yet replaced my touchscreen, i am thinking about a loose connector or something...
btw i was on official r3 fw
your flex cable might have worn out!
Jonny4911 said:
your flex cable might have worn out!
Click to expand...
Click to collapse
Where is that located? Where can I get a new one?
kyuubikitsuni said:
Where is that located? Where can I get a new one?
Click to expand...
Click to collapse
here is one thread about it, there should be others if you search some more than I did
and this would be a means to get a new one (official site, similar price), if it really is the cause and you don't like to tinker
cheers and gl
If your LCD is working, then it could be bad digitizer like mine instead of the ribbon cable. (Well, I use X1 a lot in humid place like bathroom.....). Just pay a few extra to buy the LCD+Digitizer for about ~$30 that will save you a lot headache for just the digitizer alone. There's a thread in X1 accessories forum.
Hi everyone...
I've been having problems with my Galaxy S since yesterday. After upgrading to XXJPM my display is rotated 180 degrees (completely upside down). Strangely enough, the touch interface seems to be working just fine.
For example, the "Phone" icon is supposed to be on the bottom-left of the screen. It is now displayed on the top-right corner (again, upside down) but in order to activate it I still have to touch the bottom-left corner right on the icon's original position.
The display is also rotated 180 degrees if I enter recovery or download mode, but the volume up-down buttons still function as is. There are times when the display will appear normal for a few seconds before rotating itself 180 degrees again.
I followed the installation steps to the letter, did everything properly, I even searched just in case other users had similar issues, but I still haven't found a fix yet (really sorry if I missed similar threads). I also tried calibrating the g-sensor, but that didn't solve the problem.
Auto-rotate works perfectly, but the screen is still upside down no matter which way I rotate the handset. The same goes for when auto-rotate is off.
Any thought will be highly appreciated. I'm also willing to make a small donation if necessary. I'm desperate for a solution
Odd. Try flashing a new rom
Sent from my GT-I9000 using Tapatalk
ickyboo said:
Odd. Try flashing a new rom
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I did, but that didn't solve the problem. I think it has something to do with the bootloader since during startup the screen would show the normal Galaxy S logo correctly for about one second and then the display is rotated. Even the download/recovery interface is flipped.
The Good and the bad
Good news first: you are not the only one have this problem.
I have same problem after updated Nordic v. Froyo.
Bad one is I haven't got a clue how to sole the problem.
Let't belive ours has special talent which can jump twice more that ordinary ones.
try reflashing with one of the roms that has a bootloader included. search around not all do.. i know the jh2 for i9000m has bootloader..
wonbad said:
Good news first: you are not the only one have this problem.
I have same problem after updated Nordic v. Froyo.
Bad one is I haven't got a clue how to sole the problem.
Let't belive ours has special talent which can jump twice more that ordinary ones.
Click to expand...
Click to collapse
Sure hope so
lgkahn said:
try reflashing with one of the roms that has a bootloader included. search around not all do.. i know the jh2 for i9000m has bootloader..
Click to expand...
Click to collapse
I'll give it a try. Will search for a good rom with bootloader included after this
lgkahn said:
try reflashing with one of the roms that has a bootloader included. search around not all do.. i know the jh2 for i9000m has bootloader..
Click to expand...
Click to collapse
Tried this, didn't work too. I also tried Tayutama Edition rom, actually it helps a bit. After finishing the sdcard scanning routine the screen would work just fine for quite a while before going straight back to being rotated. It is also still upside down during the entire boot process.
Found another interesting discovery. Still using Tayutama firmware, if I switch the Power-Saving Mode from Display settings off and on, the display will be reverted back to normal.
I wonder what's causing this issue in the first place...
Tried another fresh rom, still no improvement...
I attached a picture showing how the screen is upside down even in download mode. Notice how the USB port and the download mode triangle just don't match.
Any further advice would be highly appreciated
Solved Mine!
Make sure Galaxy lie FLAT(back of galaxy isn't flat)
Setting-Display-calibrate
Mine worked that way hope yours too.
Now landscape to potrate turn like cream
but added bonus is landscape turn either ways .
what a great addition.
wonbad said:
Make sure Galaxy lie FLAT(back of galaxy isn't flat)
Setting-Display-calibrate
Mine worked that way hope yours too.
Now landscape to potrate turn like cream
but added bonus is landscape turn either ways .
what a great addition.
Click to expand...
Click to collapse
I'm afraid that doesn't work for me
I'm glad you fixed your Galaxy S though. Quick question: did you have the screen upside down during the Galaxy S logo animation on startup?
It seems diffren kind problem
I am sorry that my solution did not work for you.
Mine did work few hours after down load Froyo.
Then problem began.
Have you tried factory reset then calibration?
wonbad said:
I am sorry that my solution did not work for you.
Mine did work few hours after down load Froyo.
Then problem began.
Have you tried factory reset then calibration?
Click to expand...
Click to collapse
Yes, I tried that and it didn't work.
Still trying different solutions right now, hope I can get a good solution soon
I have another Galaxy S in hand. The broken one still has its screen upside down. I was wondering if I can backup the bootloader and ROM of this new Galaxy S with the system working correctly to the broken one. Will that be possible?
As always, inputs are welcomed
Thanks wonbad!
wonbad said:
Make sure Galaxy lie FLAT(back of galaxy isn't flat)
Setting-Display-calibrate
Mine worked that way hope yours too.
Now landscape to potrate turn like cream
but added bonus is landscape turn either ways .
what a great addition.
Click to expand...
Click to collapse
Thanks! I had also problems with auto rotation, did even factory reset but did not start to work until made calibration you mentioned.
I've tried virtually anything to get the display fixed, including doing a complete rom backup of a healthy Galaxy S, and the display is still rotated. I think it really is a bootloader problem.
I took it to Samsung service center here in Bali. They said they can fix it, but they won't because I got the device in UK and I need to take it to a service center in the UK to get it fixed. Crazy...
A quick Note
==========
Just to make it clear, for any future reference, display rotation if shown when it is powered off and charging and also while booting, this is most probably a hardware issue, this can ONLy be achieved by replacing the LCD (or doing a hardware repair of the LCD) it has nothing to do with sensors or software.
Thanks.
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Lesiroth said:
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Click to expand...
Click to collapse
Are u already solved the problem?
fpatrik17 said:
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Click to expand...
Click to collapse
same with my phone, may be digitizer was broken
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
shreyas99 said:
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
Click to expand...
Click to collapse
I have used CM6 on my phone, but when i got this issue, i made my phone back to 2.1. The problem is still standing.
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
shreyas99 said:
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
Click to expand...
Click to collapse
No warranty... :/ I really love this phone..
link: cgi.ebay.com/NEW-Touch-Screen-Digitizer-Motorola-Milestone-A855-/370476035985?pt=PDA_Accessories&hash=item564217af91#ht_997wt_1200[/url]
This may solve my problem??
Havent seen any such issues.. Thanks god..
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
fckndrmr said:
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
Click to expand...
Click to collapse
I have bought a new touchpanel today.. now waiting for the shipping.
I will write here, when i replaced it what will happen 2 me.
See u later!
I have a mililar problem, right side of screen wont work... flash to 2.1 dont slove this problem
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
lfsupino said:
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
Click to expand...
Click to collapse
where do you suggest one gets an environmental chamber?
environmentalchambers R'US of course
xploited said:
where do you suggest one gets an environmental chamber?
Click to expand...
Click to collapse
I have had good success with a combo of rice (inside a ziplock bag) to absorb humidity and/or a toaster over at the lowest bake setting.
Worked on MANY electronic devices over the years.
Sent from my Milestone using XDA Premium App
Same problem here. I've solved it by changing the digitizer (ebay 25 euros). Works fine now but in the mean time I change for a Desire HD... good by Milestone !
If you decide to change the digitizer, be patient, fixing th Milestone is not an user friendly task But if you take your time it's ok !
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance
My Nexus One Fell from a height of approx 1.5 meters.
> Now the charging LED is not glowing.
> When i turn on the Camera, the screen completely goes BLACK for about 1 min and then say NOT RESPONDING
> When i dial/call some number i can hear the voice , but the screen goes blank and i cannot hang up the call.
I wanted to Re-Install my OS, but i am not able to enter the Recovery.
I am using 4EXT Touch, the screen stays at the count of 0 and keeps looping there.
I even updated the newest Recovery using the 4EXT recovery APP. but No use.
These are the problems i so far found.
The mobile fell just a few mins back and i am very concerned :crying:
Please help
Seems like all the TOP portion things are not working.
The Proximity sensor is acting ODD.
Some times it does not Turn off the screen. SOme times it does not turn on the Screen.
Please reply.
How to Flash the ROM without entering the custom Recovery ?
I disassembled the mobile and checked if there are any loose connectors but didnt find any.
Please help me
"Fell from 1.5mts height"
AND IT WORKS?!?!?! No broken screen!?? Miracle!!
Best chance is to get a cracked screen/digitizer one on eBay, should cost around $20 or so, and replace the motherboard + camera.
dwegiel said:
"Fell from 1.5mts height"
AND IT WORKS?!?!?! No broken screen!?? Miracle!!
Best chance is to get a cracked screen/digitizer one on eBay, should cost around $20 or so, and replace the motherboard + camera.
Click to expand...
Click to collapse
The mobile was having the Silicon Cover so i think it absorbed some force, but some internal parts might have been effected
I dont have any problem with the TOUCH. It works well.
I found no loose connections in the connectors.
Non working things are :
1. Ear phone socket - Does not detect the headset
2. Camera - shows blank screen for a few secs and force closes
3. Proximity Sensor
4. Charging LED
so far i found these issues.
I cant enter the Custom Recovery (4EXT) too.
Please help me.
Should i buy the Mother Board ?
From ebay.in its a bit costly :
Link
HTML:
http://www.ebay.in/itm/USA-HTC-G7-Desire-Google-Nexus-One-Main-LCD-MotherBoard-Board-Flex-Cable-JTP-/290878178827?pt=IN_Mobile_Accessories&hash=item43b9b0c60b&_uhb=1#ht_1696wt_906
Is ther no other solution ?
firoz3321 said:
Should i buy the Mother Board ?
From ebay.in its a bit costly :
Link
HTML:
http://www.ebay.in/itm/USA-HTC-G7-Desire-Google-Nexus-One-Main-LCD-MotherBoard-Board-Flex-Cable-JTP-/290878178827?pt=IN_Mobile_Accessories&hash=item43b9b0c60b&_uhb=1#ht_1696wt_906
Is ther no other solution ?
Click to expand...
Click to collapse
Sounds like you've damaged quite a bit of it. It may not be the motherboard that's the only problem, and could mean also replacing screen, etc. Unless you're up to that it could be time to let the Nexus One go..
carmichaelalonso said:
Sounds like you've damaged quite a bit of it. It may not be the motherboard that's the only problem, and could mean also replacing screen, etc. Unless you're up to that it could be time to let the Nexus One go..
Click to expand...
Click to collapse
I cant think of letting it go
latest update : My mobile does not Switch ON , it passed away in the sleep ( My poor nexyy :angel: )
If some one can suggest any possible part to replace i would do that. I am not financially ready for another mobile soon.
Please help me.
It could be a variety of parts - any hardware experts here?
Sent from my Nexus 4 using xda app-developers app
carmichaelalonso said:
It could be a variety of parts - any hardware experts here?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
As of now it started to Switch ON. So it is better than not having it at all.
All the above noted issues are still not working
firoz3321 said:
As of now it started to Switch ON. So it is better than not having it at all.
All the above noted issues are still not working
Click to expand...
Click to collapse
I'm sure some items aren't absolutely necessary such as the charging led, but the earpiece and the proximity sensor could be more the problem. At least it boots - better that than nothing at all
carmichaelalonso said:
I'm sure some items aren't absolutely necessary such as the charging led, but the earpiece and the proximity sensor could be more the problem. At least it boots - better that than nothing at all
Click to expand...
Click to collapse
Yes i am really Glad it boots. I can use internet and SMS, but Ear Phone is big problem. Proximity Sensor is real Head Ache as i have to reboot after aeery call :crying:
firoz3321 said:
Yes i am really Glad it boots. I can use internet and SMS, but Ear Phone is big problem. Proximity Sensor is real Head Ache as i have to reboot after aeery call :crying:
Click to expand...
Click to collapse
Take a look on eBay - there are some ear pieces available (at least in the UK) and proximity sensors. Then if you follow a video which you will likely find you can manually replace these parts to see if they are the problem
Had the same problem; it can be the ribbon cable which is either loose, or completely disconnected. The bad news is that you'll have to disassemble pretty much the whole phone. We've actually damaged one the of the cables once while trying to do this, so if you try it, be very careful! There is a page online somewhere that tells you which cable it is exactly, just search the symptoms:
1. Camera doesn't work
2. Charger LED doesn't work
3. Proximity sensor always shows "near", as a result -the screen remains black after making a call
UPDATE:
Found the link with the picture of which cable it is:
code.go ogle.com/p/android/issues/detail?id=15291
It's a long page, so just scroll down
My Nexus one also has the same issues!
I know that it is coz of the flex cable. the other thing that doesn't work is the camera flash (when you try to use it as a flash light)
luckiely for me the ear phone does work! i am able to use the phone (except for the camera and flash light) for pretty much everything
as i always make/answer the calls using the ear phones, i dont have to worry about the proximity sensor not responding during the calls.
My suggestion would be to try and see if your ear phone is detected or not (may be play a song) and then use it to make some calls.
ant_vas said:
My Nexus one also has the same issues!
I know that it is coz of the flex cable. the other thing that doesn't work is the camera flash (when you try to use it as a flash light)
luckiely for me the ear phone does work! i am able to use the phone (except for the camera and flash light) for pretty much everything
as i always make/answer the calls using the ear phones, i dont have to worry about the proximity sensor not responding during the calls.
My suggestion would be to try and see if your ear phone is detected or not (may be play a song) and then use it to make some calls.
Click to expand...
Click to collapse
Unfortunately its not working. I thought i can atleast use for media listening/watching but its not detecting the earphone
there are some dedicated ROMs for usage as Media Players so i thought of it, but no use.
Only possibility will be to use the Bluetooth Headset. (I have Plantronics Backbeat 903+ but my ears pain a lot , doesnt fit will )
If some one can confirm that it is related to the FLEX cable then i can dare to buy it
ques
I had same issues as you.
Basically flex cable is loose and it needs to be attached properly. I have gone to service center and they dis-assembled and corrected it.
Proximity sensor ->camera not working. I can confirm the problem (happen twice to my n1)
@OP: I saw your post regarding NexusOne having booting up on Safe Mode: due to getting wet in rain.
How to resolve it. I am facing safe mode boot up issue. ?
szihs said:
I had same issues as you.
Basically flex cable is loose and it needs to be attached properly. I have gone to service center and they dis-assembled and corrected it.
Proximity sensor ->camera not working. I can confirm the problem (happen twice to my n1)
@OP: I saw your post regarding NexusOne having booting up on Safe Mode: due to getting wet in rain.
How to resolve it. I am facing safe mode boot up issue. ?
Click to expand...
Click to collapse
RE: Safe Mode...
I've had this before, all I did was to take my N1 completely apart, until the point where I couldn't see anything else to remove lol!
I then left it to air for the next 48 hours, reassembled and it works!
BUT !
I warn you, if you do this, you MUST make a note of where every piece on your phone goes or you'll regret it at the end!
szihs said:
I had same issues as you.
Basically flex cable is loose and it needs to be attached properly. I have gone to service center and they dis-assembled and corrected it.
Proximity sensor ->camera not working. I can confirm the problem (happen twice to my n1)
@OP: I saw your post regarding NexusOne having booting up on Safe Mode: due to getting wet in rain.
How to resolve it. I am facing safe mode boot up issue. ?
Click to expand...
Click to collapse
My case was that the water entered the Trackball.
once it dried it was normal again.
DO NOT USE HAIR DRYER
thanks.
GlennBrownie said:
RE: Safe Mode...
I've had this before, all I did was to take my N1 completely apart, until the point where I couldn't see anything else to remove lol!
I then left it to air for the next 48 hours, reassembled and it works!
BUT !
I warn you, if you do this, you MUST make a note of where every piece on your phone goes or you'll regret it at the end!
Click to expand...
Click to collapse
firoz3321 said:
My case was that the water entered the Trackball.
once it dried it was normal again.
DO NOT USE HAIR DRYER
Click to expand...
Click to collapse
Yes, patience was the key. After some 24 hours it started working. (Trackball got drenched in water).
Thanks.
A friend of mine with s3 mini accidentally drop water to his phone... The phone e works properly now but the screen can't stay off... With power key or screen off time the screen keeps enabling... I make factory reset but still nothing... Any thoughts?
pikachukaki said:
A friend of mine with s3 mini accidentally drop water to his phone... The phone e works properly now but the screen can't stay off... With power key or screen off time the screen keeps enabling... I make factory reset but still nothing... Any thoughts?
Click to expand...
Click to collapse
If it's in guarantee give it back to the store for replacement and tell him to make the duck! :silly:
If it's not in guarantee tell him to buy a new one. :crying:
jstath1972 said:
If it's in guarantee give it back to the store for replacement and tell him to make the duck! :silly:
If it's not in guarantee tell him to buy a new one. :crying:
Click to expand...
Click to collapse
So it isn't software fault... On the wakelock detector it show that the keuguard is keeping the screen on.. It is possible that it's hardware problem but the software keeps the phone on?
pikachukaki said:
So it isn't software fault... On the wakelock detector it show that the keuguard is keeping the screen on.. It is possible that it's hardware problem but the software keeps the phone on?
Click to expand...
Click to collapse
In normal situation when you press the button you activate the keyguard and it going to sleep after a few time. The software (keyguard) follows the hardware (button). In your case because of the damage of the hardware the button is always on and holds on the keyguard. Maybe i'm wrong but one other solution is to install a custom rom and deactivate the hardware button with the problem. You can activate and the navigation bar if you want. I think that can solve the problem also.
I would have opened up the phone and take a look. Disconnect/reconnect all cables inside and hope for the best
tys0n said:
I would have opened up the phone and take a look. Disconnect/reconnect all cables inside and hope for the best
Click to expand...
Click to collapse
I will try this I had to wait to find another phone for his work... And then I will try it...
pikachukaki said:
I will try this I had to wait to find another phone for his work... And then I will try it...
Click to expand...
Click to collapse
Don't open the phone if its still on warranty, just get it to the repair center. If you have no luck with getting your phone repaired for free try opening it as your last resort
EDIT: its obviously no software issue, it would be fixed by making a factory reseT/install custom ROM but you say you have already done that.
NickVXD said:
Don't open the phone if its still on warranty, just get it to the repair center. If you have no luck with getting your phone repaired for free try opening it as your last resort
EDIT: its obviously no software issue, it would be fixed by making a factory reseT/install custom ROM but you say you have already done that.
Click to expand...
Click to collapse
It isnt on warranty...and if it is its water damage and 99% they won't fix it!!!
Sometimes there is only a rest of water in phone. (Also same days later)
Put the phone without accu a few days in uncooked rice! (Maybe it is to late. Immediately after the bath rice is the best you can do)