Related
I bought a nook color yesterday so I could get in on the rooting and roming fun as well. It came with 1.0, which I've already rooted and am now running HC from an SD card. A bit slow, so I'm planning on trying to install it internally. 2 Questions:
1. Is their any reason I should stay at 1.0? Or should I upgrade to 1.01 or 1.1? Will I be able to go back to 1.0 if I want using the 8 reboot method?
2. If I install HC to the internal memory, will I be able to restore to stock? I'm not sure I'm going to keep this device yet so I don't want to do something that will make it impossible to return to stock.
Thanks
1: No, there is no benefit to staying at 1.0.0. If you want to stick with stock eclair then upgrade to 1.1.0, the update fixed some WiFi issues. To revert back to an older "save" install clockwork mod via rom manager and make a backup. That backup can be reflashed whenever from whatever.
2:I don't know what you're confusing GB for but so far only Eclair/Froyo/HoneyComb currently run on the nook color. Yes you can revert back to any older CWM backup from any install on your eMMC. There are stock flashable images in the dev forum, so don't worry about not being able to go back to stock.
Good luck. Have fun.
woot1524 said:
1: No, there is no benefit to staying at 1.0.0. If you want to stick with stock eclair then upgrade to 1.1.0, the update fixed some WiFi issues. To revert back to an older "save" install clockwork mod via rom manager and make a backup. That backup can be reflashed whenever from whatever.
2:I don't know what you're confusing GB for but so far only Eclair/Froyo/HoneyComb currently run on the nook color. Yes you can revert back to any older CWM backup from any install on your eMMC. There are stock flashable images in the dev forum, so don't worry about not being able to go back to stock.
Good luck. Have fun.
Click to expand...
Click to collapse
sorry, typo, i meant HC not GB. who can keep them straight these days? thanks for your answers. i've read reports of people having various problems with 1.1.0, it seems the consensus is 1.01 is the version to be on.
OneStepAhead said:
sorry, typo, i meant HC not GB. who can keep them straight these days? thanks for your answers. i've read reports of people having various problems with 1.1.0, it seems the consensus is 1.01 is the version to be on.
Click to expand...
Click to collapse
I think the problems you're talking about stem from upgrading an already rooted 1.0.0 or 1.0.1 with clockwork mod installed. If you start with a fresh(no root/CWM) 1.0.0 install then upgrade to 1.1.0 via b&n, then root it; you're in the clear.
But why bother with all of that when nookie Froyo 6.8 on eMMC is stable and performing beautifully.
OneStepAhead said:
I bought a nook color yesterday so I could get in on the rooting and roming fun as well. It came with 1.0, which I've already rooted and am now running HC from an SD card. A bit slow, so I'm planning on trying to install it internally. 2 Questions:
1. Is their any reason I should stay at 1.0? Or should I upgrade to 1.01 or 1.1? Will I be able to go back to 1.0 if I want using the 8 reboot method?
2. If I install HC to the internal memory, will I be able to restore to stock? I'm not sure I'm going to keep this device yet so I don't want to do something that will make it impossible to return to stock.
Thanks
Click to expand...
Click to collapse
1. none that I could ever see... must've fixed something to warrant two updates although I believe that both were mostly for WiFi but I never had problems with 1.0 or 1.01...
...now I'm just wondering where the new B&N updates are as IIRC they had TWO slated for February and it's getting to be kind of late in the month to push out two updates... might just as well do one big one now... hope that they're skipping Android 2.2 and going straight to 2.3 or 3.0...
woot1524 said:
I think the problems you're talking about stem from upgrading an already rooted 1.0.0 or 1.0.1 with clockwork mod installed. If you start with a fresh(no root/CWM) 1.0.0 install then upgrade to 1.1.0 via b&n, then root it; you're in the clear.
But why bother with all of that when nookie Froyo 6.8 on eMMC is stable and performing beautifully.
Click to expand...
Click to collapse
Well the only reason I bought a Nook Color was to play with Honeycomb, dont have much interest in running Froyo, I can do that on my EVO already
One reason to stay with one of the stock ROMs is if you want to use the B&N reader and B&N kids functionality, which are not part of the froyo or HC ROMs. I personally use it a lot and hope they'll get ported over.
eyecrispy said:
One reason to stay with one of the stock ROMs is if you want to use the B&N reader and B&N kids functionality, which are not part of the froyo or HC ROMs. I personally use it a lot and hope they'll get ported over.
Click to expand...
Click to collapse
Im sure thats important to many people, although I strictly bought this to play with Honeycomb. Now that I've got it running, I'm wondering what I'll actually use this device for? I can already do all this stuff on my EVO and the screen size isn't that much bigger. It sure had been fun messing with it though! Why B&N didnt enable some of this functionality out of the box I'll never understand!
I'm new to Android and tablets and have never had a smart phone. However, I am in the computer field and am relatively technical. At the very least, I'm intelligent and can follow clear directions.
Where I'm running into trouble is that, because this is all so new to me, I'm lost when reading a lot of these forums, because I have no idea what all these terms mean or what things are.
Here's where I'm at with my Nook Color. Got it a week ago, rooted it with AutoNooter 3.0, got ADB working (finally) over USB. YouTube works. Can get my email. Using Launcher Pro and Dolphin HD. That's about it.
I'm unclear about a few things, and I realize they're pretty basic. But I've searched and searched and can't find clear answers. Hopefully, someone here can help me:
1. How do I know what version of Android I've got on this thing. Nowhere can I find a place to see the version number. And the AutoNooter 3.0 page didn't tell me what version it installs. 2.2?
2. Does Flash work on this or not? This is related to question 1, because I need to at least know what Android version I'm using before I can even beging to search to figure out whether Flash works with it.
3. What is CM7?
4. I tried installing Flash101.apk with ADB, but get the message: INSTALL_FAILED_OLDER_SDK. Again, I'd like to know what this means, but what I've read says the Flash version is for an newer Android version. So, we're back to... what version of Android is on this thing?
As fas as the rest, does anyone know if there's anything out there that goes over basic terms for those of us completely new to Android and tablets/phones and rooting them? Much of the instructions I read refer to things I've never heard of and, when I try looking up those terms, I just get more terms I've never heard of.
Thanks!
1) You have 2.1 (Eclair)
2) No, you need 2.2. There are several options, including simply running it from an SD card or flashing it to memory (eMMC)
3) CM7 is andrioid 2.3. Good stuff, but still a work in progress.
4) See #2
Thanks very much for responding.
Regarding your answers:
1. Is there a place on the Nook where I can find this?
2. Can you recommend a link to a method for getting this? Is it an upgrade, or would I be completely re-rooting this thing and having to reconfigure everything?
Any suggestions on some basic information for newbies?
Thanks again!
Sorry, I don't think I understand the question. Could you specify what you mean by "this"? Thanks.
Sorry, not sure which question you're referring to.
1. This = The version currently running on it.
2. This = Version 2.2
I can't be certian since I have moved to a CM7 variant, but I think it might be under settings either about or device information.
If you rooted with Autonooter you are on Android 2.1 Eclair. If you are running a froyo rom you are on Android 2.2. If on a CM7 based Rom you are on gingerbread android 2.3
loribuono said:
I'm new to Android and tablets and have never had a smart phone. However, I am in the computer field and am relatively technical. At the very least, I'm intelligent and can follow clear directions.
Where I'm running into trouble is that, because this is all so new to me, I'm lost when reading a lot of these forums, because I have no idea what all these terms mean or what things are.
Here's where I'm at with my Nook Color. Got it a week ago, rooted it with AutoNooter 3.0, got ADB working (finally) over USB. YouTube works. Can get my email. Using Launcher Pro and Dolphin HD. That's about it.
I'm unclear about a few things, and I realize they're pretty basic. But I've searched and searched and can't find clear answers. Hopefully, someone here can help me:
1. How do I know what version of Android I've got on this thing. Nowhere can I find a place to see the version number. And the AutoNooter 3.0 page didn't tell me what version it installs. 2.2?
2. Does Flash work on this or not? This is related to question 1, because I need to at least know what Android version I'm using before I can even beging to search to figure out whether Flash works with it.
3. What is CM7?
4. I tried installing Flash101.apk with ADB, but get the message: INSTALL_FAILED_OLDER_SDK. Again, I'd like to know what this means, but what I've read says the Flash version is for an newer Android version. So, we're back to... what version of Android is on this thing?
As fas as the rest, does anyone know if there's anything out there that goes over basic terms for those of us completely new to Android and tablets/phones and rooting them? Much of the instructions I read refer to things I've never heard of and, when I try looking up those terms, I just get more terms I've never heard of.
Thanks!
Click to expand...
Click to collapse
CM7 (Cyanogenmod 7) is a custom rom, which is a custom operating system that replaces your current one. If you are not familiar with Android yet or rooting, I would stick with autnooter for now. Phiremod beta 2 is a stable custom rom with flash, but you need clockwork recovery first to install it.
Yeah, checked those places Wile E, but didn't see it there. Thanks, though.
stelv, would that run off the card or internally? If it runs off the card, I could try it out without messing up what I've already got, right?
loribuono said:
stelv, would that run off the card or internally? If it runs off the card, I could try it out without messing up what I've already got, right?
Click to expand...
Click to collapse
Most custom rom installs (phiremod) would erase what you have now completely. You would have to redownload programs and use the nook color app from market for books. You could use titanium backup to backup and restore apps. There is a thread here and on androidtablets.net for phiremod beta 2.
But there may be a version of froyo that runs off sdcard but I am not sure how stable that is. If you are running froyo from an sdcard and mess with the nook internally, it may mess your nook up when you remove the card and try to go back to your old setup.
The good thing with the beta 2 version of phiremod is that you can restore a previous version of the nook from the clockwork recovery menu if you have cwr installed. That is if you make a backup first through cwr on your autonooter version of nook.
If you decide to go the route of a custom rom I would check out the how to on androidtablets.net about clockworkmod recovery first.
sent from my rooted nook color
Thanks for all the info. When you say "custom roms," are you referring to any rooting of your Nook Color? Is the version of Android I have after running the AutoNooter 3.0 considered a custom rom? Or did I just merely strip off some of the "skin" Barnes & Noble has on there, 'cause it didn't seem very much like I'd started over, but more like I "got past" something that was already on there and, therefore, opened up more functionality. Does that make any sense? I'm getting the feeling that Nookie Froyo and CM7 completely wipe your Nook and give you a fresh OS. Yes?
loribuono said:
Thanks for all the info. When you say "custom roms," are you referring to any rooting of your Nook Color? Is the version of Android I have after running the AutoNooter 3.0 considered a custom rom? Or did I just merely strip off some of the "skin" Barnes & Noble has on there, 'cause it didn't seem very much like I'd started over, but more like I "got past" something that was already on there and, therefore, opened up more functionality. Does that make any sense? I'm getting the feeling that Nookie Froyo and CM7 completely wipe your Nook and give you a fresh OS. Yes?
Click to expand...
Click to collapse
Ok here is another long book by me, sorry for the long posts
Yes, Nookie Froyo, CM7, Phiremod give you an entirely new OS.
Custom roms are not any rooting. They are entirely different android operating systems so to speak. Most require one to wipe the devices internal Rom (Read Only Memory) in order to put a new one on. This is sort of risky as it erases everything, but is made less risky by using stable custom roms in combo with clockwork recovery. If the internal memory gets messed up and the procedures for instaling a custom rom are not followed or an error happens, your device will be unusable until fixed (fixed usually by booting CWR off sdcard and installing a stock image). Please do research and ask around XDA or androidtablets before installing a custom rom to know what the ups and downs of it are.
Also please keep in mind on the Nook certain Roms like CM7 require a different version of CWR and require a workaround to work as of now. It can be kind of tricky to install. Phiremod Beta2 can be installed through normal recovery. Check us out over at http://www.androidtablets.net/forum/nook/ if you want. There are a lot of useful guides over there.
Yes autonooter just opens up functionality
Autonooter is not a custom Rom. It is just the method of rooting or unlocking your android device. Rooting an Android device makes you system administrator of the device. This is so you can do things beyond what B&N lets you do with the device like use the Android market.
This is what I did with my Nook. Autnootered it>installed Clockwork Recovery>Made a backup with Clockwork Recovery>Then Installed Phiremod beta2 through clockwork recovery as per the instructions for that rom
Thanks again for this. I appreciate you taking the time to explain this to a newbie. It's beginning to make much more sense now. For now, I'll stick with what I've got, keep reading and then go from there.
Ugh. Authentication error while reading a book and then a reset, and I'm back to the beginning. Except worse, because even navigation while reading a book doesn't work right. Anyone experience this?
Sorry I don't have that issues so I am not sure. Maybe its a password issue?
Perhaps. Don't know. Starting over from scratch. All I know is that it happened when I was merely reading a book, about ten minutes after trying to login to Google Talk with a different Google account than the one I used during the AutoNooter process.
Who knows...
Hey Guys, i am new and not very knowledgeable in the android world i tried searching but the more i search the more confused i get, i finally got my hands on a nook color (got a brand new in box nook from a place called mardens for 156$ taxes in i was stoked) and rooted it but i think i want to go further then just a root because i don't use the nook as an e reader , here are my questions:
1. I would love to install froyo on my device but i can't seem to find a step by step guide on how to do it
2. I also see that there is 2 froyo builds and was wondering which one is better.
3. Also is Froyo stable on the nook or is it really glitchy? Compared to the stock rooted nook?
4. Once you install froyo is it reversible (go back to the stock build?)
Any help would be greatly appreciated!!
Thanks
Gunner
Gunner86 said:
Hey Guys, i am new and not very knowledgeable in the android world i tried searching but the more i search the more confused i get, i finally got my hands on a nook color (got a brand new in box nook from a place called mardens for 156$ taxes in i was stoked) and rooted it but i think i want to go further then just a root because i don't use the nook as an e reader , here are my questions:
1. I would love to install froyo on my device but i can't seem to find a step by step guide on how to do it
2. I also see that there is 2 froyo builds and was wondering which one is better.
3. Also is Froyo stable on the nook or is it really glitchy? Compared to the stock rooted nook?
4. Once you install froyo is it reversible (go back to the stock build?)
Any help would be greatly appreciated!!
Thanks
Gunner
Click to expand...
Click to collapse
I have not received my nook yet, but doing some prep for installing nookie froyo, it just takes a bit of time and searching to find the info you're looking for (some of it external to XDA)
1. http://forum.androidcentral.com/barnes-noble-nook-color/ check the stickies for how-tos
2. i believe there is an "official" one and a customized one that someone built from the official 0.6.8 version. I'm going to use the customized one as it comes with the oc kernel
3. From what I read, auto-nooter would be the MOST stable but Nookie Froyo is almost as stable and gives you the benefits of Froyo instead of Eclair. The other ones (HC and CM7) are coming along but aren't quite there yet.
4. Yes you can go back. With the Nook Color being able to boot from SD card, it's unlikely to ever be "stuck" on something.
Again, that's just from what i read i have no experience (yet). hope to get the nook color this week or next.
If you want to use the B&N stock apps, stay on stock eclair and just root that because you will lose all that functionality when you flash NF or CM7 or any other variations. I haven't used NF but from what I read, it's second most stable next to rooted stock eclair.
barrist said:
I have not received my nook yet, but doing some prep for installing nookie froyo, it just takes a bit of time and searching to find the info you're looking for (some of it external to XDA)
1. http://forum.androidcentral.com/barnes-noble-nook-color/ check the stickies for how-tos
2. i believe there is an "official" one and a customized one that someone built from the official 0.6.8 version. I'm going to use the customized one as it comes with the oc kernel
3. From what I read, auto-nooter would be the MOST stable but Nookie Froyo is almost as stable and gives you the benefits of Froyo instead of Eclair. The other ones (HC and CM7) are coming along but aren't quite there yet.
4. Yes you can go back. With the Nook Color being able to boot from SD card, it's unlikely to ever be "stuck" on something.
Again, that's just from what i read i have no experience (yet). hope to get the nook color this week or next.
Click to expand...
Click to collapse
Thanks for the link i finally got froyo on my nook, but i can not for the life of me figure out how to get the market and the google apps on it, everytime i try to run the commands i get errors
Im pretty new to it too. got mine about a week ago. some of the stuff is pretty overwhelming at first, especially anything to do with adb. cant figure that out for the life of me.
anyways, the easiest way ive found so far is this thread
[ROM] Customized Nookie Froyo 0.6.8 Image for SDcard Updated (2/25)
http://forum.xda-developers.com/showthread.php?t=922324
its a custom build of froyo and already has everything needed installed. its fast, and so far, very stable. im running an 8gb class 4 sd card. it does seem to matter what you use.
here is a thread that has a small list of cards known to work and not work
http://forum.xda-developers.com/showthread.php?t=946896
pretty much everything you need is in the instructions. use any of the programs they tell you to use for things. it justs makes it easier, even if there are alternatives.
good luck. its not that bad.
i have rooted and flashed the hero many many times, but this one makes me more nervous I dont have much time to read as it is a birthday gift, but i keep reading about problems with youtube and gmail.. do they have to be linked before rooting.. whats the best rom with 1.1.0..
i just dont want to miss any vitally important steps and screw this up.. any help? Is there a step by step guide.. thanks much
I would start here http://forum.xda-developers.com/showthread.php?t=872003
After rooting your device you can decide to stay on the stock rom and just have more functionality or you can move to a variety or other roms running Andoid Eclair,Froyo,Gingerbread, or Honeycomb.
Each of these ROM has their own ups and downs. If this is a gift for a non-techy person I would suggest just using a rooted stock with some tweaks or rooting and installing Eclair as these seem to be the most stable options at the moment.
Because the Nooks has priority on SDcard booting you can run any of these roms off the SDcard as well while leaving your stock Nook OS in place. This is a great option if you just want to give a bunch of different ROMs a test. Also the boot priority of the SDcard makes 'bricking' the nook nearly impossible. So while you can still screw up your Nook you will most surely be able to fix it.
Thanks for your help.. I rooted it and left it stock for now.. if he wants something different i will change it to Eclair.. its **Beautiful** I am impressed.. might have to pick one up for myself.. Thanks
Currently I'm running just basic auto-nooter on my NC and on my friends. I haven't upgraded either of them to the new B&N update. Should I factory reset and do the update and then run Froyo or CM7? I'm not technologically proficient but was able to get the auto-nooter running from following the steps. Any ideas?
Thanks
Get a CWM bootable image and you can just do the manual nooter. Honestly, there is so little to do that auto nooter isn't a big deal.
I flashed back to stock 1.01 first and then used the B&N update to go to 1.2, then used manual nooter 4.5.6. Everything seems to be working great, just follow the instructions in the main post.
So this is basically auto-nooter for 1.2? Will I have flash capabilities or is just with froyo and cm7 still?
WitheredHand said:
Currently I'm running just basic auto-nooter on my NC and on my friends. I haven't upgraded either of them to the new B&N update. Should I factory reset and do the update and then run Froyo or CM7? I'm not technologically proficient but was able to get the auto-nooter running from following the steps. Any ideas?
Thanks
Click to expand...
Click to collapse
What you should do is.......read, read, read. Only then will you know what you want to do with your Nook. Learn the limitations of the roms (factory & custom) and make your own opion. I happen to like running CM7 on my Nook, my wife absolutely hates it. She's still on rooted 1.1 stock B&N firmware. There is a wealth of information on XDA. Once you know what you want out of your Nook..... Somewhere in here, there is a guide to do it LOL.
WitheredHand said:
So this is basically auto-nooter for 1.2? Will I have flash capabilities or is just with froyo and cm7 still?
Click to expand...
Click to collapse
Yes, it's the same as auto-nooter. And, yes, flash is included with the B&N 1.2 update.
Will there be an actual auto nootered coming out soon??
Hockey,
I have read, read, and read. When it gets to the technical jargon I get a little lost, that's why I came to the forums. I even did a search on here but then I had to wade through more jargon. doncuarana, thanks for the info, looks like that's what I will be doing.
WitheredHand said:
Hockey,
I have read, read, and read. When it gets to the technical jargon I get a little lost, that's why I came to the forums. I even did a search on here but then I had to wade through more jargon. doncuarana, thanks for the info, looks like that's what I will be doing.
Click to expand...
Click to collapse
Hope I didn't come across wrong & I agree at times the more you read the more confusing it can be. I just meant everyone likes something different and that's why we've got so much variety. Once you find what you want though....Some fine folks around here have posted guides for making it work.