Hey guys, I'm trying to reflash back to stock Froyo 2.2.1 and need some advice before I do.
Here is my firmware info:
PDA: I9000XWJS3
PHONE: I9000XXJPY
CSC: I9000OXAJPY
Build info: 2011.01
Do I have to download each individual file for PDA, Phone and the CSC's that I have?
Why do they all not match to just either JS3 or JPY?
Thanks in advance for your help.
BTW, my phone is the Central American version, which I think is the same as the AUS version
Not to worry, a mod can close this thread now.....
Just flashed the XXJPY PDA and it worked just fine. I'm loving my old battery life!
Related
Hi, My situation is the following:
I had a Galaxy S with the following stats:
MODEL: GT-I9000T
PDA: I9000TUBJG5
PHONE: I9000TUBJG7
CSC: I9000TUUBJG4
FIRMWARE VERSION : 2.1-update1
Baseband version I9000TUBJG7
Kernel version: 2.6.29 latin.umts(at)samsung #2
Build number: ECLAIR.UBJG5
I got impatient, and try to flash it to 2.2, after a lot of missteps and messed up stuff i got it working. Everything was fine until it started to crash and the wifi just stopped working a couple weeks after the change.
So, I want to go back to my stock status(like fresh out of the box), and then, with my new "experience" I'll try different things.
How can I do that? The main problem should be the firmware, I do have access to an other phone with the original stats(bought 2 that day) would that help?
I would like to flash a new Europ. FW version (say XWJS8 = ver. 2.2.1) to my phone with PDA: I9000ZSJPD / PHONE: ZSJPE / CSC: ZSJPD and ProductCode GT-I9000HKDVD2.
Has anyone of you tried this? I am afraid of any problems since the ProductCode does would not match the Europ. Firmware.
Thanks for some feedback
i tried a long time ago from dxjg4 to xwjpa using kies(it was possible before)
totally changed my prod code from xso to kor hahaha
but i dont know about your firmware
I was on DXJG4 too but I flashed to European firmware without a glitch. Mind you, I only flashed the "international" european versions, the one with XX as first two letters. Just like stated above, the only side effect is that it will change your CSC product code to KOR. But just a couple of months ago I changed it to XEU without any problem.
EDIT: Oh yeah I used Kies (tricked Kies, not it doesn't work) before and now I use ODIN for flashing
I am thick as ....so please help.
My UK SGT is:
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
Brought from CPW -
When I connect to Kies it shows 'this device cannot be updated'
Please in plain, simple, english what do I need to do to rectify this and be able to update through Kies?
I have tried connnecting to Odin 1.7 which is com8 and yellow.
My thought is to go back to stock and leave the hell alone! Unless you advise me otherwise.
Many thanks as always
EDIT: Oh what fun we had......Now I have completely ....... I have flashed JMK stock safe that I saved when I first upgraded to 2.3.3, now I have
PDA: P1000XWJMK
PHONE: P1000XXJPZ
CSC: P1000PHNJM5
As I said I am stupid so please save me before I break it?
X
Edit 2: Ok back to Version 1>
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
what a waste of a few hours, still no stock.....
Edit 3: Got Kies to recognise and update the SGT yeah!
Damn it, now I still have 2.2
PDA: P1000WJMK
PHONE: P1000XXJMA
CSC: P1000PHNJM5
WTF is going on, can someone PLEASE lend me a hand?
I am thick as ....so please help.
My UK SGT is:
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
Brought from CPW -
When I connect to Kies it shows 'this device cannot be updated'
Please in plain, simple, english what do I need to do to rectify this and be able to update through Kies?
I have tried connnecting to Odin 1.7 which is com8 and yellow.
My thought is to go back to stock and leave the hell alone! Unless you advise me otherwise.
Many thanks as always
EDIT: Oh what fun we had......Now I have completely ....... I have flashed JMK stock safe that I saved when I first upgraded to 2.3.3, now I have
PDA: P1000XWJMK
PHONE: P1000XXJPZ
CSC: P1000PHNJM5
As I said I am stupid so please save me before I break it?
X
Edit 2: Ok back to Version 1>
PDA; P1000xxjq1
Phone: P1000xxjpz
CSC: P1000oxajq1
what a waste of a few hours, still no stock.....
Edit 3: Got Kies to recognise and update the SGT yeah!
Damn it, now I still have 2.2
PDA: P1000WJMK
PHONE: P1000XXJMA
CSC: P1000PHNJM5
WTF is going on, can someone PLEASE lend me a hand?
Two things here:
1. Your sales code should match the PDA/PHONE/CSC for kies to 'see' ifcthere is an update.
2. As of this writing there is no gingerbread update for the UK.
Sent from my GT-P1000 using Tapatalk
I think you have an Asian stock firmware there. PHN is Philippines, I think. So Kies thinks you have a Philippines SGT.
I flashed JJ4 from samfirmware.com, which is a Russian firmware.
I think, from what I've read, that stock Gingerbread is available in UK (sorry to contradict Bongski). Unfortunately I didn't save my firmware before flashing away from stock, so I'm in the same boat as you - no Kies updates.
What you need is someone to provide an official CPW firmware, I think, which you would flash with Odin and then Kies should update you. I tried using SpoofFW from the market, but Kies only got to 25% before failing, then I had to go back to Odin and the JJ4 firmware.
If you're comfortable with Odin, you might want to try that?
If you do get the CPW firmware, please let me know...!
@treb1971
CSC PHN doesn't stand for Philippines. Philippine CSC's are as the following:
GLB - Philippines;Globe
SMA - Philippines;Smart
XTC - Philippines;Multiple
XTE - Philippines;SUN
My bad - apologies...
If you do get the CPW firmware, please let me know...!
Anyone got this and can help?
'I tried using SpoofFW from the market, but Kies only got to 25% before failing, then I had to go back to Odin and the JJ4 firmware.'
I have read 45 pages of SpoofFW and its way over my head!
Thanks in advance
Hi guys....
I was tring to understan what ROM did I have...
I've understood that my galaxy S is a Portugese phone...and I've seen here http://forum.xda-developers.com/showthread.php?t=811194&page=3 that the last firmware for my phone is
Portugal (TMN): GT-I9000HKDTMN --> PDA: JM8 / PHONE: JM4 / CSC: JM1
As I whrote here http://forum.xda-developers.com/showthread.php?t=1363851
I've flashed my phone but now I can't call or send sms or connect to internet by 3g...the phone is always on NO SERVICE...
I'd like to try to flash by Odin, or in any oyther way, the eclair official ROM for my mobile or the last official ROM for my mobile...but I can't understand how to find the files... Anyone can help me please?
Thank U so much...