Related
Hi guys,
Im thinking of flasing a custom rom using odin.
Im running stock froyo 2.2.
PDA: I9000XWJPA
PHONE: I9000XXJPP
CSC: I9000XEEJP4
My phone is rooted and lag fixed. I understand that i need to remove the lag fix before and flash.
I updated to this using the registry hack. My questions are as follows...
1) Can i flash a custom rom from stock 2.2 or do i need to firstly flash a kernal with recovery 2e and then flash a custom rom?
2) Am i right in thinking that the PDA is the right bit to be looking at i.e when people say this rom is usable with JPA / JPO etc. The phone and CSC are not important when flashing a custom rom ( but still needed obviously )
3) If by some miracle of god we ever do get 2.3 and i flash back to stock Froyo via odin using a rom from samfirmware.com, will kies recognise my phone? Or will i forever be destined to flash "unofficially" through odin.
4) Looking at the PDA etc given above can anybody recommend a good rom to flash with gingerbread theme and apps. ( i keep seeing Darky's rom popping up in conversations ) and also have a link to it if you would be so kind. Im not lazy but theres so many roms all over i want to make sure i get the right one.
5) Once i have recovery 2e can i flash future roms over the top using rom mananger by clockworkmods and not have to go through odin? Or how does that work?
If i could get some clear answers to the above that would be great.
Yes i am a newbie at this but i am confident that i understand the basics, its just a couple of things above that i want clearing up before i proceed.
I know how to use odin correctly. ( close kies first / make sure odin opened before plugging in phone etc. )
P.S Yes i have 3 button recovery and download mode.
Thank you for taking the time to read this and a big thank you to any body that takes the time to respond with help.
Any body that can help?
dude i feel your pain. i've rooted and installed custom roms on two other phones, most recent the HTC Desire Z. and it was quite a nightmare to just start off to know what the first step is, there are soo many different guides its hard to know which is what and what has now been superceeded by something else!
now i'm trying to get a custom rom on my galaxy S too, but really having a hard time understanding everything becuase guides and stuff are so different for different roms, gets confusing and dont know which one is for me!
my phone is already rooted, i have firmware 2.1-update1, i know i have voodoo lagfix somewhere installed. but my base band version is I9000XXJM4, which i hav'nt seen in any guide! where did you get your seperate PDA, PHONE, CSC info from?
sorry i could'nt help you and i justed added a bunch more questions to mix
also how did you manage to get Clockwork Recovery on your phone? i have recovery 2e atm. i downloaded Rom manager from the market and tried installing Clockwork rewcovery, but first it would not even download. then i tried next day and it downloaded it through rom manager. but i dont think it installed it. i went into recovery mode and then it tried to auto-install clockwork recovery in recovery mode! but it just hanged at zero status bar for like 20 mins. i turned the phone off and on, went back into recovery mode and it was still recovery 2e, how do i get clockwork recovery to flash as the recovery mode?
Type *#1234#into your dial pad and it will come up. If I'm right I believe that 2.1 is more simple to flash over than 2.2 which is the bit that's confusing me.
I believe that you would need to flash a new kernel with recovery 2e and then flash a new Rom over the top.
I'm a but confused though as to weather or not I would need to flash back to 2.1 and then do a couple more flashes to get the job done.
Can some one please clear this up.
Sent from my GT-I9000 using XDA App
1. You don't need to have 2.1 rom to flash, since you'll be able to do all the flashing using Odin and download mode. Just flash a kernel, using odin, that has clockworkmod integrated, and you'll be able to flash most roms and kernels with the clockworkmod.
Speemod kernel is a great kernel, and has clockworkmod included.
Link: http://forum.xda-developers.com/showthread.php?t=822756
2. PDA is the rom part. CSC is important when using stock roms. I think that custom roms have CSC included in them.
3. You'll always be able to flash with Kies by using the Kies Registry Hack or by flashing a stock rom through odin. Kies will recognise your phone even if you are on a custom rom, but I'm not sure if it'll flash your phone.
4. I prefer Docs Ultra Slim roms because it's light, and you can customize them however you want. Darky's rom is a good option if you want all the features of a stock rom, and more. I use a Gingerbread theme with Doc's rom.
Links,
Darky's: http://forum.xda-developers.com/showthread.php?t=814091
Doc's: http://forum.xda-developers.com/showthread.php?t=817703
Both can be installed through ClockWorkMod
5. I think I answered this already.
Thank you for clearing that up. Very helpful but unfortunately you now raised another question haha.
You said that I would always be able to flash through kies using the registry hack... but wasn't that disabled so the registry hack wouldn't work any more a couple of versions back on. 803 or whatever it is?
And you also said that kies would recognise my phone but might not flash it which if I'm reading it right.contradicts.what you said about always been able to flash through kies.
Thank you so much for previous post it was very helpful.
Sorry if I sound stupid for.asking so many questions but I want to make sure I have covered all the angles before I proceed.
Again thanks for taking the time to help.
Sent from my GT-I9000 using XDA App
By registry hack, I really meant the Kies Registry Patcher app found here: http://forum.xda-developers.com/showthread.php?t=835628
Works on all Kies versions at least for now.
Like the original registry hack, this using this app makes Kies think that you have a stock rom and as long as Kies thinks that you have a stock rom, it will flash your phone.
In the sentence where I said that Kies will recognise your phone but won't flash, I mean't that it wouldn't flash without the Registry Patcher.
Thank you sooooooo much for your help dude.
Sent from my GT-I9000 using XDA App
I have a Bell SGS, GT-I9000m. I'm considering installing hardcore kernel only, i.e. no custom ROM. If later I want to revert to the stock kernel, how would I do that?
Thanks for your help.
Sent from my GT-I9000M using XDA App
I'm not quite sure if it is possible with the stock-kernel but if you can make a full backup (like with CWM) you could restore it later. But why do you want to get back to stock-kernel?
If the backup-possibility does not work you have to find the stock-kernel for downloading and flash it via Odin or you have to flash the whole stock-ROM with Odin.
Thanks for your answer. I can't make a Nandroid backup while I'm on stock (because I can't install CWM recovery because I'm on 3e stock recovery, not 2e)
I'm not sure why I would want to go back to stock... Maybe something goes terribly wrong? I guess I just wanted to know if it was possible.
Last question: when you say I would have to find the stock kernel, is that just Google, or are there sites/repositories out there for this sort of thing?
Sent from my GT-I9000M using XDA App
I should add, the site/repo question is for kernels and stock ROMs...
Thanks.
Sent from my GT-I9000M using XDA App
site1ca said:
I'm not sure why I would want to go back to stock... Maybe something goes terribly wrong?
Click to expand...
Click to collapse
Well, then just flash the whole stock-ROM and flash it (look at samnfirmware.com for firmwares).
site1ca said:
Last question: when you say I would have to find the stock kernel, is that just Google, or are there sites/repositories out there for this sort of thing?
Click to expand...
Click to collapse
Don't know if you'll find it anywhere cause nobody needs it.
Possible scenario
Alright, thanks for your help. I guess the one scenario that is bothering me is as follows:
1) Bell - FINALLY - releases their official Gingerbread update.
2) I've installed Hardcore kernel, which according to - http://forum.xda-developers.com/showthread.php?t=822756 - "works on all 2.2 and 2.2.1 ROMs".
3) Would I be able to install the Bell Gingerbread update with Hardcore kernel?
This is why I keep asking how I would revert from Hardcore because I obviously don't want to lock myself out of Bell updates forever.
It doesn't matter which kernel you are using when you are flashing with Odin. And Bell releases the updates later than Samsung, so you'd have the advantage of getting updates earlier with a 'free' firmware.
One solution to flash back the stock kernel is to extract the zImage (the kernel) from the stock rom and flash that with Odin or Heimdall.
But as far as I know having a custom kernel would not cause problems with installing a stock upgrade.
Done
I've installed Hardcore's kernel. Everything seems to be working fine, phone started up and picked up service.
I booted into recovery, enabled lagfix, turned on all of the recommended tweaks and then ran the Quadrant Standard. Things seem a bit faster, so I guess it's all good.
Next step, Darky's 10.1.
Thanks for your help, everyone.
One more question:
I did a Nandroid backup of everything (so data, dbdata, cache AND system). The restore option says "Be careful!". What's up with that? I mean, what's the caveat?
Thanks.
I've already made some NANDROID-backups, but never seen 'Be careful!'.
If the backup was succesful I wouldn't care about that.
*sigh*, I hate to keep adding questions on to this thread, but I must.
After installing the hardcore kernel and enabling tweaks and lagfix, I'm running into exactly this problem: http://forum.xda-developers.com/showthread.php?t=851970
My phone was extremely hot for a while, then I got a warning indicating that my internal phone storage was running low, etc.
Eventually, I found this file (/data/local/tsprsp) to be the culprit. I deleted it and rebooted and now my phone is fine. However, vibration just doesn't work at all!
Any ideas? Has anyone else run into this problem?
I was told that if you do a 'full' backup, in some cases restoration will fail with some error. But it depends on the version of the ROM you are using.
That is the reason why it is recommended to backup only data and if you want to restore, then first reflash your rom, then restore the data.
Thanks, zsori. That explains the "Be careful!".
Sent from my GT-I9000M using XDA App
After trying MIUI, a stock ROM will never touch my SGS again.
meresis said:
After trying MIUI, a stock ROM will never touch my SGS again.
Click to expand...
Click to collapse
you will have to flash back a stock rom via odin if anything wrong happen during the flashing of custom roms, although chances are low if you follow the instructions carefully.
good luck and have fun flashing custom roms!
Which Gingerbread?
So I'm continuing my quest to learn more about all of this custom ROM flashing stuff. And I wanted to get gingerbread on my phone... So I figured I'd just get an image from samfirmware.com and flash it. But then, I went here (because I was also interested in Darky's 10.1 so I was reading their guide): http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/
It says that flashing "Ficeto_JVH_I9000_Odin" will get me a stock Gingerbread. My question: what's the difference between flashing an image from samfirmware.com or flashing "Ficeto_JVH_I9000_Odin"? How do I know which to pick?
In all my browsing/reading, I realize that there are 3 "separate" parts: kernel, modem and then the "ROM". Ideally, I want to keep my modem as is... What does that correspond to in Odin? I've tried to find what "PIT", "PDA", "PHONE" and "CSC" represent in Odin, but I'm not sure I got it right. PIT = Kernel? PHONE = modem?
And finally, how do I know if a particular kernel is compatible with a particular ROM?
Sorry, I know there are lots of questions there. But please help clearing up a n00b's confusion. Thanks.
site1ca said:
So I'm continuing my quest to learn more about all of this custom ROM flashing stuff. And I wanted to get gingerbread on my phone... So I figured I'd just get an image from samfirmware.com and flash it. But then, I went here (because I was also interested in Darky's 10.1 so I was reading their guide): http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/
It says that flashing "Ficeto_JVH_I9000_Odin" will get me a stock Gingerbread. My question: what's the difference between flashing an image from samfirmware.com or flashing "Ficeto_JVH_I9000_Odin"? How do I know which to pick?
In all my browsing/reading, I realize that there are 3 "separate" parts: kernel, modem and then the "ROM". Ideally, I want to keep my modem as is... What does that correspond to in Odin? I've tried to find what "PIT", "PDA", "PHONE" and "CSC" represent in Odin, but I'm not sure I got it right. PIT = Kernel? PHONE = modem?
And finally, how do I know if a particular kernel is compatible with a particular ROM?
Sorry, I know there are lots of questions there. But please help clearing up a n00b's confusion. Thanks.
Click to expand...
Click to collapse
you got it wrong.
PIT is for mapping the partitioning of the phone. In most cases you should only use 512 pit file. and only use it when you want to wipe the phone.
the three parts is "pda" (which is the rom), "phone" (which is the modem), and "csc" (which is the carrier customization and apns)
the kernel is in the part of pda (the rom)
check the thread in xda of the kernel to see if its a gingerbread kernel or froyo kernel.
hope this clear things up
Yes, that helps. That's really good to know. So now, in Darky's guide to flashing Flash Ficeto_JVH_Odin, I see that only PIT and PDA are specified. This is reassuring, knowing that the modem and carrier stuff isn't touched.
Many thanks.
There are firmwares with three parts (Phone, PDA, CSC, including bootloader) and with only one part (PDA, no bootloader(?)). The one-part-FW is just an 'update', the one with three parts an 'upgrade'.
OK, so I've been reading guides, FAQs, how-tos, and various forum posts, and thought I had a pretty good handle on how to flash FW to this machine. So, last night I backed up everything important, and downloaded from here ( http://forum.xda-developers.com/showthread.php?t=1102881 ) the following:
2.2 UGKC1/UGKC1/BMCKC1/Sbl. This is the stock FW as currently installed on my I9000M from upgrading through Kies.
2.2.1 XWJS8/XXJPY/OXXJS5 (MultiCSC) (no sbl)
So just as a sanity test I first tried flashing the UGKC1 PDA file over to my I9000M using Odin. This worked as expected, since it's the same kernel.
Next, I tried to flash over just the XXJPY PDA file over to my I9000, using Odin. No re-partition, no PIT, no modem or CSC. No go - it just repeatedly displays the GT-I9000M screen and never boots the kernel. Couldn't get into recovery mode from this state, but was able to access 3-button download mode.
So, tried flashing over the 2.2.1 XXJPY PDA, Phone and CSC files. Same as before - no actual boot.
I flashed it back to the 2.2 UGKC1 PDA, phone and CSC files, and did a factory data reset and cache clear, and everything was fine running 2.2 again.
From reading here it appears that others have successfully installed 2.2.1 or even 2.3.x kernels on Bell Canada GT-I9000M phones. So, what important step did I miss?
Do I need to re-partitiion? Do I need to use a 2.2.1 FW that includes the boot loader?
For now I'm OK running 2.2, but would eventually really like to be on 2.3.x and don't want to wait for Samsung to make 2.3.x (what happened to 2.2.1) available to GT-I9000M phones. I'll leave it alone for now as I'm going on vacation in a couple of weeks and don't want a hosed phone.
What happens if you flash just a kernel like CF root or speedmod? My only other thought is to redownload jpy and try again as maybe the download was corrupted.
Also with another kernel like speedmod you could download and install a custom rom on cwm (clockwork mod) via recovery that is 2.2.1
I've had some problems with 2.3.4 (never tried 2.3.3) so I am back on Froyo for a bit until things get sorted out a bit more.
G
I don't know if there is a suitable version of CF Root for the UGKC1 firmware - they mostly seem to be oriented to the more international versions. As usual, in Canada we get something a little weird. Don't know about speedmod.
I don't think there should have been any problem with the downloads, as the files themselves are in md5 format, which means they are getting verified by Odin 1.8 when it goes to use them, as I understand it. If they were corrupted Odin should complain about it.
With the announcement ( http://forum.xda-developers.com/showthread.php?t=1158492 ) that Gingerbread is supposed to get an official release to Bell phones soon (which mine originally was), I might just let this lie, for now.
There is a gentleman on youtube by the name of AndroidGalaxyS (original, I know) that has some excellent and detailed walkthroughs and reviews of various ROMs for the I9000M.
youtube.com/user/AndroidGalaxyS
Specifically in your case, you'll want to watch this one that shows how to install 2.3.4 JVP:
youtube.com/watch?v=cLXQn0gOBuA&feature=feedu
Good luck.
I agree that the source maybe lacking. I just found out that the JL2 firmware from samfirmware.com is missing db_data file so I would always get an error after flashing that. KC1 would also not always boot for me so it might be missing something too.
That said what are you trying to accomplish? If you are just trying to go to another stock rom I'd just leave it and put a custom kernel on to give you root and CWM recovery.
Most any other Froyo rom is flashable from CWM in recovery and you do not need to worry about odin except to recover from bad things and it looks like you can do that. Gingerbread is different because they changed the bootloaders and that means Odin.
Of course its getting harder to dig back and find those Froyo roms since the rest of the i9000 world has been on GB for a while.
G
Thanks for the replies, so far. Mostly I was just experimenting, and trying out XXJPY was just a first step in my experimentation before moving on to GB. Part of the reason for this is that it seems like a lot of the modified kernels and so on are meant to be flashed over certain versions of the firmware, and those versions don't include the Bell/Virgin-specific ones. Or maybe I've misunderstood how this stuff works.
Yes, while my attempts to install XXJPY have been a complete failure, even when re-partitioning with a PIT file, when I re-flashed back to the stock UGKC1 FW everything was fine.
At this point I'm just trying to get a better understanding of where this went wrong. I've never specifically updated the SBL - the JPY package I installed didn't include it, and I didn't check off the "Update boot loader" box when re-installing KC1.
I've seen a number of posts here from people who updated I9000Ms to other FW, but unfortunately they don't seem to have detailed exactly where they started from, or exactly what they installed, or how.
hi all
i picked up a used rogers galaxy tab 7".upgraded to 2.3.3 official via kies.
GT-P1000R
rooted it.
unlocked it.
now i wish to use the phone capabilities and have a few questions.
i see in a couple posts that you no longer have to flash a complete rom,just a modem.
is that info correct?
i see that the jm2 modem seems to work best with the rogers tab,so do i just flash the modem with odin and that gives me the voice capability.
or do i need to flash a complete rom(European)?
also there is no dialer program so where do i get that at?or does it come with the modem flash.
is there a better modem than jm2 for the rogers tab?or the bell i9000 modem?
i am in canada
thanks,jeff
kbg1 said:
hi all
i picked up a used rogers galaxy tab 7".upgraded to 2.3.3 official via kies.
GT-P1000R
rooted it.
unlocked it.
now i wish to use the phone capabilities and have a few questions.
i see in a couple posts that you no longer have to flash a complete rom,just a modem.
is that info correct?
i see that the jm2 modem seems to work best with the rogers tab,so do i just flash the modem with odin and that gives me the voice capability.
or do i need to flash a complete rom(European)?
also there is no dialer program so where do i get that at?or does it come with the modem flash.
is there a better modem than jm2 for the rogers tab?or the bell i9000 modem?
i am in canada
thanks,jeff
Click to expand...
Click to collapse
you need a euro based rom (official or custom) and bell i9000 modem.
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
kbg1 said:
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
Click to expand...
Click to collapse
that i don't know, 'cos i am on 2.3.5 with af974's ROM since day 1
kbg1 said:
hi
i have the bell i9000 modem already downloaded but not flashed.
which european rom would work best with the rogers tab.
i prefer 2.3.3
thanks
Click to expand...
Click to collapse
Careful what you flash though, if it's from XDA any ROM should do you okay but Samsung official ROMs may contain locked boot loaders. Catch up on some reading before doing anything.
Also i suggest that you do a complete backup of your tab before flashing anything else so that you could revert back in case of issues. Stock ROGERS firmware is hard to find. And if you do a backup I wouldn't mind a copy of it as long as you keep your personal information out. As a matter of fact, what i am after is a un-rooted fully stock ROGERS ROM. As i have deleted my original backup, and would like to revert completely back to stock, I would be very thankfull if you could help. But none the less you should do a complete backup, something like the roto or nandroid backups.
Try the OVERCOME rom, it's a great place to start as a noob to flashing, they have very detailed tutorials and the ROM is good.
EDIT: And the OVERCOME rom does work with the bell i9000 modem just fine for phone calls. Although the volume on the tab is not the greatest for a speakerphone.
theREDlegion said:
Careful what you flash though, if it's from XDA any ROM should do you okay but Samsung official ROMs may contain locked boot loaders. Catch up on some reading before doing anything.
Also i suggest that you do a complete backup of your tab before flashing anything else so that you could revert back in case of issues. Stock ROGERS firmware is hard to find. And if you do a backup I wouldn't mind a copy of it as long as you keep your personal information out. As a matter of fact, what i am after is a un-rooted fully stock ROGERS ROM. As i have deleted my original backup, and would like to revert completely back to stock, I would be very thankfull if you could help. But none the less you should do a complete backup, something like the roto or nandroid backups.
Try the OVERCOME rom, it's a great place to start as a noob to flashing, they have very detailed tutorials and the ROM is good.
EDIT: And the OVERCOME rom does work with the bell i9000 modem just fine for phone calls. Although the volume on the tab is not the greatest for a speakerphone.
Click to expand...
Click to collapse
darned,i rooted and unlocked it earlier this week.
i definitely would have done a stock backup for you.
can i unroot?i used oden and one of the cf rooting images.
unlocked using galaxy s unlock from market.
can i even revert back to stock?if so i will do a backup.
i have done nothing else to the stock rogers 2.3.3
i searched my hardrive but kies must delete the firmware after flashing.
jeff
kbg1 said:
darned,i rooted and unlocked it earlier this week.
i definitely would have done a stock backup for you.
can i unroot?i used oden and one of the cf rooting images.
unlocked using galaxy s unlock from market.
can i even revert back to stock?if so i will do a backup.
i have done nothing else to the stock rogers 2.3.3
i searched my hardrive but kies must delete the firmware after flashing.
jeff
Click to expand...
Click to collapse
Thanks for the offer. But no need to go through all of that unless you can un root with something like super one click (fast and easy, but I don't think that will work for you). If your tab is still under warranty you might want to learn how to root and unroot and restock and such (its all covered in the forums). Otherwise I don't want you playing with your tab and have a "bad" flash trying to help me out. Do read up in the dev section before you start flashing custom ROMs.
That said if you do feel comfortable flashing and decide to make a backup for yourself I definitely wouldn't mind a copy.
RED
hi
not scared of bricking the tab,i have been flashing samsungs for the last couple years,captivates etc.my last tab i did a supposed gps fix which ended in a bootloop.
i managed to get it back but with a modified 2.2 firmware.then kies would not let me upgrade to 2.3.3(unofficial firmware error)
my problems have always been actually returning to stock.
in recovery i have the orange clockwork recovery that has an option to do factory reset.will this take me back to unrooted and unlocked???
if so consider it done.
i will need direction to do a full backup after that.
jeff
Doing a hard reset will NOT un-root or re-lock your device (as far as I know). The factory reset will clear the data and cache and should not touch the system. You have to un-root your device using the method you rooted it with or something along those lines.
As far as a backup is concerned, creating a system backup has been covered in the forums before. There is plenty of detailed instructions on performing a backuphave a look at the Roto Backup method.
Just picked up a galaxy tab ( rogers )
gt-p1000r
firmware 2.2
all stock
no root
no unlock
I would like to "give back" something
for all the HELLp you guys have given via these forums
( i swear all my grey hair started once i dumped my blackberry and went samsung and found this site! )
Anyway
If you are still looking for the a copy of the STOCK system before I start to play...
I will try to figure out how to make a copy for you
Hello there,
I've been playing with my i9000m for the last 12 hours (...) and I seem to have hit a roadblock. I simply cannot find a kernel that will run on my phone with 2e/ clockworkmod recovery AT ALL and it's driving me a bit nuts. I'd love for someone to point me in the right direction, preferably to an Odin flashable (that's pretty much all I'm comfortable with) 2e/ clockworkmod recovery kernel that will actually get past the boot screen on an i9000m. Any help would be appreciated. Thanks, all.
Oh, and if I should be using something other than Odin, please inform me. And if my thinking is all backwards, smack me and gimme some splainin, if you'd kindly. Thanks again.
what version of android / rom are you using? It will make a difference.
I'm using the stock gingerbread 2.3.3 UGKG3 rom designed for the i9000m. AFAIK, there is no custom kernel that will work with this rom - only the rooted stock kernel with no CWM.
If you want to use a custom kernel that has CWM features, I think you need to install either a stock i9000 rom like XXJVT, or you have to go with a custom rom entirely.
what exactly are you trying to do? If you want the latest stock rom with root. Flash JVT pda, with KG3 modem and CSC and 512 pit, in odin then flash latest semaphore or chainfire kernal to root. Put file in pda and flash in odin. There are alot of good tutorial on here.
Firmwares: http://forum.xda-developers.com/showthread.php?t=1102881
Root Kernal: http://forum.xda-developers.com/showthread.php?t=1112908
I've just got UGJL2 on it atm, since that's the only thing i can get to actually run. I'll give XXJVT a shot. But ultimately all I want to be able to do is try some of the custom roms (cyanogen, miui, apply some fancy lock screens through update.zip) through the use of ROM manager... which I do need CWM for. I do like the stock gingerbread rom, I just want to customize it a bit.
cyanogen and miui are completely seperate roms, they are not based on samsung what so ever. You should probably just stick to stock jvt for now. (until you get your feet wet.) There are alot of great custom roms you can run on stock jvt. You just need to get that up and running first. Follow the instructions in the links I gave you. I live in Canada too, and run JVT pda on my phone, with KG3 modem and csc, works perfect, install semaphore kernal after, its the file linked Semaphore_Kernal_JVT_1.8.2.tar. Once your rolling you can install zips through cwm. Just remember to keep your baseband version, your modem KG3 or you will notice your cell coverage sucks. With KG3 its full bars. The firmware in the first link I gave you contains bootloaders so you can flash straight from there. Remember to use the 512 pit file. Since this is the first time your flashing gingerbread.
Alrighty, I see how it all peices together now. I've got the UGKG3 modem and CSC installed alongside the xxjvt PDA with Semaphore JVT over it. Runs really nicely too, Thanks for all the help guys. I'll play with this for a while, hopefully it'll continue to run nicely I'll go gander around at the other roms now that I actually know what i'm looking at! I like this one though, thanks for the reccomendation. And I do indeed have my CWM installed, so i can go gallavanting now
Thanks guys!
Happy rom hunting
Which "JVT" ROM did you guys install?
XFJVA/XXJVT/OXFJV1/Sbl or XXJVT/XXJVT/OXAJVT/Sbl (or does it matter between these two?)