This is just an updated version of deadnex's original guide, with a few things thrown in from various people who have found what works and what doesn't.
This guide has been used and tested as effective with the windows 7 rc 7100 build.
Step 1 - Go here http://www.microsoft.com/windows/windows-7/download.aspx and download Windows 7. You can get a key from the same place, so don't worry about not having a key.
In the event that the servers aren't offering the download {due to server issues} you can download a current version through a torrent site. I recommend mininova as it's the most legitimate of the bunch.
To get a key for windows 7 (32bit) (if you downloaded it through a torrent site), go to this address https://www.microsoft.com/betaexperience/productkeys/win7-32/enus/default.aspx
(64bit)
https://www.microsoft.com/betaexperience/productkeys/win7-64/enus/default.aspx
To clarify this part, you're setting up a usb flash drive or usb card reader and sd card to work as an installation drive for windows 7. I've followed these steps exactly, and found them to be completely accurate. They work, so do each step, and make sure to keep track of your steps so as not to miss one.
Thanks to deadnex for all of this information.
USB-install:
User feedback suggests that doing this next part should be done on a computer running windows vista. In winXP, your usb drive might not show up during the process.
edit (before step 1, create a folder on your main computer called windows7. Don't do this on your shift, and it's recommended to use c:\windows7\ to make the process easier. If you use another location to extract the files to, make sure to remember which directory it is, and adjust the steps of this tutorial to your own location.)
1 - Open the windows7 Iso file with winrar, and extract all the files into C:\WINDOWS7\ (or the folder you created as mentioned above)
2 - Open command prompt in administrator mode (start - all programs - accessories - (right click) Command Prompt and select run as administrator.
3 - Then type these commands without the - and press enter after each :
- CD\
- DISKPART
- LIST DISK
- SELECT DISK X ( X is the memory stick disk number you got from LIST DISK)
- CLEAN (CAUTION; THIS WILL ERASE ALL THE CONTENTS OF THE SELECTED DISK)
- CREATE PARTITION PRIMARY
- SELECT PARTITION 1
- ACTIVE
- FORMAT FS=FAT32 QUICK
- ASSIGN
- EXIT
- XCOPY C:\WINDOWS7\*.* /S /E /F U:\ (U:\ is the name of usb drive you are using for your install, if your drive has another letter, which is most likely, of course put in your own) (after *.* and after each letter preceded by / there's a space!)
OPTIONAL- Include an extra folder on your windows7 usb drive called drivers, and put all the drivers in there that you'll need to get windows 7 running smooth. Drivers are listed just a little further down on the page, so before completing the next step, go there and get the drivers.
WARNING- THIS WILL ERASE YOUR VISTA AND REPLACE IT WITH WINDOWS 7. THIS IS IT!!! Don't worry, win7 rc 7100 is far better anyway. Just to be safe though, backup your personal data before continuing to the next step.
[edit] With a little use and time, I've come to find that windows 7 has a great amount of compatibility issues with certain games. Although I've only had the chance to try a few, there seems to be a trend with win7 being unable to run a lot of older, but still 3d, games. Warcraft 3, and Dungeon Keeper 2, to be more specific. If you're not a gamer, it shouldn't matter, and Windows 7 is still the best choice for you. If you do like to play games, you might want to reconsider changing to windows 7. [edit]
Restart your computer, at startup push FN+F10, and choose your usb drive.
This will take you to the installer, select your language, timezone, and keyboard layout. Next.
In summary, you're going to select Custon (advanced) in the windows 7 installation process, and some card readers (sd to usb) don't work.
This will not affect your HTC SHIFT Vista recovery partition but it will remove Vista itself from your shift. Your settings from Vista will not be carried over to Windows 7.
_________________________________________________________________
DRIVER DOWNLOADS AND INSTALLATION.
Well, once you're through all that, you should be looking at your new windows 7 shift. Now's the fun part! Driver installation!
Go to this link, and download all of the drivers. (10 in total)
http://www.htc.com/www/SupportDownload.aspx?p_id=60&cat=1&dl_id=82
Putting these files on the same flash drive as your windows 7 install makes matters much easier for this time and next time should you need to try again. I also recommend copying and pasting the installation order from the htc site in a notepad or wordpad file and putting that in the same folder as your drivers. That way, when it's time to install your drivers, you can open that file, and use it as a reference to ensure you have the order correct. Chances are that your shift won't connect to the net, right after the win7 installation.
IMPORTANT IMPORTANT IMPORTANT
INSTALL EACH DRIVER IN THE ORDER THAT HTC HAS LISTED ON THEIR DRIVER DOWNLOADS PAGE. DO THIS OR FACE TOTAL DEATHKILL!!! actually, you'll just have driver issues, but that SUCKS!
After many people have responded, I wish to remind everyone. Install all the drivers. INSTALL ALL THE DRIVERS. Install all the drivers. Yes, I said that three times. Although your shift seems to work, when only installing a few, the fact is, drivers like the synaptics touchpad driver also control other parts of your shift, like the two face bottons above the touch pad. If you install one driver, and skip one in between, you mess up the order of installation that is so important, and then force yourself to need an entire wipe and reinstallation of win 7. So, one more time, INSTALL ALL THE DRIVERS FROM HTC.
One more important thing to know about the drivers is, DON'T LET WINDOWS RESET AFTER INSTALLING EACH DRIVER, select RESTART LATER AFTER INSTALLING EACH DRIVER. I REPEAT, INSTALL ALL DRIVERS (IN ORDER) BEFORE RESTARTING WINDOWS.
IMPORTANT When you've finished installing your drivers but still need to restart to take effect, go to your display settings (right click the desktop) and select a non aero theme. save settings after that. Windows 7 Basic is a non aero theme and it looks good. If you leave Aero enabled, your shift will blue screen of death crash when it boots into high res mode.
Windows 7 can not run Aero in high res on the shift. (for now, at least)
When you install the drivers – beware that you have to install them with Vista Compatibility mode enabled and run as Administrator. Right-click the driver setup file – click the Compatibility tab – select Windows Vista and mark “run this file as Administrator”
To save yourself a headache, copy and paste the following list into a wordpad file and place it in the same directory as your driver downloads. Putting this list in the same directory on your win7 flash card means that you can open it on your shift after installing win7 and use it as a reference when installing your drivers. Keep it all together.
EACH DRIVER IS 100% IMPORTANT AND NEEDED, DO NOT SKIP DRIVERS, EVEN IF THAT DEVICE SEEMS TO BE WORKING ALREADY. SKIPPING THE TOUCHPAD DRIVER MEANS THAT THE RESOLUTION AND COMM CENTER BUTTONS DON'T WORK. SKIPPING THE SOUND DRIVER MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN. SKIPPING THE VIDEO DRIVERS MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN.
DON'T SKIP DRIVERS.
Here's the order.
a. VISTA_INTEL Chipset Driver v8[1].3.0.1014
b. Intel VGA driver(7[1].14.10.1461)
c. VistaECDrvV1[1].0.1.10
d. TouchScreen(1[1].1.0.2)
e. Synaptics MicroPad(10[1].0.11.1)
f. Realtek Audio Driver R197(6[1].0.1.5653)
g. Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0 *
h. Extension Kit USBLanDriver(3[1].8.3.7)
i. Shagctrl_1[1].2.6.122-control center
j. Marvell WiFi driver(8[1].114.123.139)
This next part was contributed by Thaihugo. Thank you a ton for this contribution Thaihugo .
To connect the Windows Mobile (your Shift's other OS) side to the PC side of your Shift, run USB Tools in the windows mobile side. If nothing happens, go to your settings (still in mobile)- Connections, then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools first). Another note, some roms, for the wm side of shift, don't include the internet sharing app. If you can't find it, you've got a crap rom, and you should follow a guide which will allow you to put a real rom on it.
Make sure you are connected to the internet on win7 side (using wifi for example) to download WMDC (Windows Mobile Device Center).
If WMDC doesn't load, plug another pocket pc into the shift's usb port while running windows7 and it will download , or if you don't have another pocket pc lying around, download it manually from Microsoft.
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective.
Again, a big huge thanks to deadnex for originally posting the steps to this process. And thanks to everyone else who contributed to a better running shift via windows 7.
Caid.
444
You forgot to specify that drivers must be installed with Vista Compatibility mode enabled and run as Administrator
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
thanks for the reminder.
weird, list disk doesn't list my usb flash drive but lists all my other hard drives. what am i doing wrong?
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Thanks for your description. It looks good. Only onr thing let me bluescreen
my Shift. Whenever I install Synaptics MicroPad(10[1].0.11.1) my Device ended with a bluescreen. I tried a newer Version from the website, but no way, same result. Does anybody understand why? Does someone found out same?
Greets
Androgyn
thaihugo said:
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Click to expand...
Click to collapse
I've added this part, thanks again Thaihugo.
Caid
444
thaihugo said:
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Click to expand...
Click to collapse
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Greenarcher707™ said:
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Click to expand...
Click to collapse
It's like driving a race car compared to vista.
apoparis said:
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
Click to expand...
Click to collapse
Please, is there anybody who can help me resolve my problem? I tried lots of times by nothing works..I'm reading all these positive comments about win7 and I can't wait to have them on my shift.. I can see the usb, I browse there to the folder I have the drivers but can't install them.
Thank you in advance
This is for those who've encountered problems.
Start the whole process over again. I didn't make the guide clear enough when I first posted this thread. It's clearer now. The symantec drivers are probably fine, you're probably crashing because windows aero is still enabled, and it is crashing your shift whenever it tries to switch to high res mode. Disable aero.
As for apop, you need to install via the second option, not the first. I got the same error when I selected the first install option when I booted into the windows 7 installer. This method will completely remove vista as the main os and put it in another folder. As a precaution, I recommend backing up personal documents that are stored in any windows sub directory. *word documents and the likes.
Anything outside of your windows directory, or on the main hard drive itself should remain after the install, but I only did this process once with extra stuff on the drive (it stayed).
Back it up, and do a fresh install.
Caid.
444
Thanks for your anser Caid. I just don't have an external DVD.. Is it impossible to go through 1st way? I have read that some people managed to do it this way..
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
thaihugo said:
It's like driving a race car compared to vista.
Click to expand...
Click to collapse
wow, that got me convinced. installing windows 7 right now. gonna probably stay up late ha ha
Caid444 said:
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
Click to expand...
Click to collapse
Yes, I'm using a usb card reader and sd card. I don't have two options (custom/express). Just one "install now"..
P.S. Thanks for your interest in my case.
ok
After you select "install now" there'll be a license agreement. After that there'll be a choice between two install options. You need to choose the second one.
Caid.
Can someone explain to me how to set up a cellular internet connection through windows 7? I've got the sim card inside, the phone recognizes it, but I don't know how to get it working through win7, I used control center to enable modem, but still no luck. This is really annoying.
Caid.
444
SnapView Turn's and WM7 too ... the screen goes off
Hi, I completed the W7 installation successfully. I even got to conect SnapView with W7 this time. I say this time because with the previous Wm7 guide I wasn't able to do it.
Anyway, now my screen is blank for WM and W7. In fact I have to press the on switch to get the W7 screen back. Once I have W7 working I need to reset Snapview throught the Shift Control Centre to get it going. Finally Snapview / WM comes on. However it lasts on for a few minutes and then the screen is off again. W7 will last for a few minutes more and the same will happen. I then need to press the sliding switch again. The W7 screen will turn on back to normal (the OS doesn't actually turn off but just the screen); however, WM doesn't turn on (in this case it's the screen and WM itself). I then need to repeat the resetting process again.
I did do this:
"
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective"
I did it at W7. Am I missing something? Any hints from the experts? Needless to say, everything was working fine with Vista.
Thanks
Hey people. Think you have seen a thread like this before? Well, that's because you have. But THIS thread is different! For two reasons:
1-It's written in GOOD English. No offense folks, but spell checking is really not that hard.
and
2-It deals with EVERYTHING you need to do to get Windows 7 retail up and running on the Shift.
If you see something that needs to be changed/corrected/updated then please feel free to let me know!
HOW-TO INSTALL WINDOWS 7 RETAIL VIA USB ON THE HTC SHIFT X9000 SERIES
Now, before we begin, this guide assumes a few things:
1-that you are using a RETAIL or RTM copy of Windows 7. This guide WILL NOT work with beta or RC versions of Windows 7 OR versions that are N-lited, stripped or altered in anyway. You MUST be using a retail image, either made from a disc you own or from other sources. Please note that we at XDA do not support piracy and suggest that you buy a legal copy of Windows.
2-That you are using a GSM version of the Shift, IE the X9500 or X9501. While these instructions will work with the CDMA version of the Shift, I personally do not have one so I cannot confirm if/how the CDMA radio works using this installation method.
3-That your version of Windows 7 ISN'T Home Basic. While Home Basic will work, it doesn't support touchscreens. I personally installed Ultimate, as the requirements are the same no matter what version you use.
To install you will need:
1-A Shift(duh!)
2-A copy of Windows 7 RTM or a retail disc
3-A USB drive that is 4GB or greater, but no larger than 32GB for Windows
4-A USB drive(any size really) for the storage of HTC drivers for post installation
5-Some time on your hands
6-Either another PC with a CD drive or a USB CD drive
Now onto the good stuff!
1-Let's begin. Insert your Windows 7 DVD into your CD drive. If you are using an ISO image, skip to step 4.
2-Make a folder on your desktop called Windows 7.
3-Copy ALL the files from your Windows 7 DVD into the folder you just made. Be patient as this process will take some time, especially if you are doing this on your Shift.
4-While the files are copying(or after they are done, whatever) go ahead and insert your USB drive into a free port.
5-Open "My Computer" and locate your USB drive. Right click on it and select "Format". Click the menu which says-"File System" and select "NTFS" from the options. Then click Format and let it finish. It should take just a few moments.
6-Once your USB drive has been formatted, open a command prompt and type the following command:
BOOTSECT.EXE /NT60 H:
Where "H" is your the letter of your USB drive.
7-Your USB drive should now be ready to use!
8-Insert your USB drive into your Shift's USB port, press the power button and repeatedly press F10 as it starts to be brought to the Boot Menu and select your USB drive and hit enter.
9-Windows should begin loading setup information now. It should take around 5-ish minutes to get to the graphical part of the installer.
10-When you are presented with the graphical portion, select your country and whatnot, then a username and such, and when it asks you if you want to Upgrade or Custom install, select Custom.
11-You will now need to format your Shift's harddrive. Select the partition that is displayed and select "Format". PLEASE NOTE THAT THIS WILL DELETE WINDOWS VISTA FROM YOUR SHIFT. YOU CANNOT RECOVER ANYTHING THAT IS DELETED. Your recovery partition however is not touched in anyway, so if Windows 7 doesn't work for you, you can reinstall the stock Vista from the recovery partition.
12-Once it is finished formatting, select that partition to install to and continue on with the installation.
13-When it finishes you SHOULD be presented with the Windows 7 desktop. And that's about it. No WiFi. No sound. Pretty much nothing. Now, you DID download the drivers and put them on another USB drive right? Right? GOOD!
14-Insert your USB drive and let Windows install it. Now, ALL of the drivers that we are about to install MUST be installed in the same fashion as I am about to describe. Right click each one and select properties. Click the compatability tab and select the option to have the installer run in compatibility mode for Windows Vista. This MUST be done or the drivers WILL NOT install.
15-Once you have done that, go ahead and install the following drivers. Don't worry about the other ones for right now. Install them IN THIS ORDER OR ELSE THEY WILL NOT WORK:
1-Vista Intel Chipset driver
2-Vista ECD
3-HTC Touchscreen
4-HTC ShagCTRL
5-Marvel SDIO WiFi
After you have installed those 4 drivers, restart your Shift.
16-Once your Shift has restarted, go ahead and press the Comm. Manager button. Shift Control Center should pop-up and your WiFi card should begin installing. If it doesn't, click on the button for WiFi and make it say "ON" and it should then start installing.
17-Once your WiFi card is succesfully installed, click Start->Windows Update.
18-Click on "Check for updates" on the left hand side and let Windows do it's thing. It should find 60-ish updates for download, around 6 of which are drivers for your various devices such as sound and Bluetooth and the like. Don't worry, your screen resolution WILL get better!
19-After Windows has installed updates..you are pretty much done! EVERYTHING should now be working in Windows 7!
20-ENJOY 3(!) HOURS OF STOCK BATTERY LIFE ON YOUR SHIFT RUNNING WINDOWS 7!
That's about it folks. I worked for 2 days straight to devise this method for installing Windows 7 on my Shift, and it couldn't work any better. If you find a mistake, or have a suggestion please let me know!
Great!
I´ll move it to [REF] Guides | Tutorials | FAQs | Stickies | Read here before posting thread located here:
http://forum.xda-developers.com/showthread.php?t=772017
it went fine till step 16, the Comm. Manager button doesnt open anything, however the wifi works ok.
please tell me how does the Comm. Manager work
and now it just wont boot, it gives a blue screen and tells me theres an error, and automatically shut down.
What error does it give you? Are you ABSOLUTELY SURE that you are using a GENUINE untouched OEM RTM copy? This process ONLY WORKS with the legal untouched OEM RTM. If you are trying this with some kinda downloaded ISO it WILL fail and bluescreen on you. It must be build 7600 or higher. Comm. Manager just works for me under 7 following these instructions.
Hi! Thank you for the guide, everything is fine! The only thing doesn't work is the touchscreen. I've installed the touchscreen drivers in compatibility mode Windows Vista SP2 and as Administrator. Do you have any idea?
EDIT: Solved! I reinstalled the driver for the 8th time and it worked!
So.... I have a crappy Sony VAIO laptop and I installed windows 8 release preview on it. It worked fine for about a day then I wanted Ubuntu back so I installed the windows version thinking I would dual boot. Yeah right. Now my computer will not go into anything but the windows recovery thing. If I go to "use a different OS" I have 2 windows 8s both on the same volume (volume 3). It won't automatic repair (says that it couldn't fix my computer and I'm missing SrtTrail.txt) and it will not refresh (says that it can't refresh and no changes were made). I created recovery media from a desktop computer with windows 8 release preview and my computer doesnt even recognize the flash drive in "reset your PC". I need help as I am an android developer and I NEED Ubuntu back. Thank you.
Sent from my Galaxy Nexus using xda premium
Since this has nothing to do with mobile devices, moved to Off-Topic.
BiteBlaze said:
So.... I have a crappy Sony VAIO laptop and I installed windows 8 release preview on it. It worked fine for about a day then I wanted Ubuntu back so I installed the windows version thinking I would dual boot. Yeah right. Now my computer will not go into anything but the windows recovery thing. If I go to "use a different OS" I have 2 windows 8s both on the same volume (volume 3). It won't automatic repair (says that it couldn't fix my computer and I'm missing SrtTrail.txt) and it will not refresh (says that it can't refresh and no changes were made). I created recovery media from a desktop computer with windows 8 release preview and my computer doesnt even recognize the flash drive in "reset your PC". I need help as I am an android developer and I NEED Ubuntu back. Thank you.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Get the ubuntu disk, pop it in, boot from CD, start new install, format the whole hard drive, wait for Ubuntu to install.
jaszek said:
Get the ubuntu disk, pop it in, boot from CD, start new install, format the whole hard drive, wait for Ubuntu to install.
Click to expand...
Click to collapse
Back up info first though...
Sent from my Galaxy Nexus using Tapatalk 2
The problem with windows8 is it installs its on bootloader and once you delete windows 8 from that partition the bootloader gets confused and still thinks windows 8 is the primary os.
You want to download easyBCD to delete windows 8 from the boot menu this will allow you to select the os originally installed.
I have a problem I have a kindle fire and getting the drivers installed is the problem
I have install the ADB driver but am having extreme difficulties getting the MTP drivers to work
I have tried everything (every solution on Google)
and nothing works
I've tried the "Media Transfer Protocol Porting Kit"
I tried to get Microsoft help they gave me the run around and confused me even more.
I tried to Go to Device Manager, under Portable Devices, right-click on MTP USB Device, and then click on Update Driver Software to update the MTP USB device driver. I then Selected “Browse my computer for driver software” to locate and install MTP USB device driver software manually.I then Selected “Let me pick from a List of device drivers on your computer”. A list will show installed driver software compatible with the device but I dont know what to pick
can someone help me please
is there an alternative solution to this Problem?
Try reading this thread, I tried to quote from it using my xda app for you and accidentally bumped it somehow...
http://forum.xda-developers.com/showthread.php?t=2309505
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I tried what they said nothing worked
I cant Reinstall win7 because it is an OEM
I tried to install alternative driver for the MTP drivers the triangle went away or MTP error disappeared but I don't know if I choose the right one
I choose from a list
when I plug in the kindle a different message comes up
"some computers require a free file transfer utility to copy files between the computer and you kindle."
I have WMP the latest version
what do I need to get this working is there something I can download and install to override this issue.
Is your version of windows 7 a non us versions, because that's what I believe his issue is. Also your PC should have a windows 7 key on it so u can always reformat it, but you need a disk, and if you don't have one I can't really help you obtain one because I am not aware of if its illegal to DL stuff u already own off then internet and i would rather not get banned from this forum if it is. However if MTP is very important and u absolutely need it, go to ubuntu's website and download a desktop live CD, if you don't know your processor type juse 32 bit, but most modern PC's are 64 bit. Anyways if all goes well after burning it to a cd or making a bootable flash drive, u can boot into a live os and it should have mtp and u can transfer stuff. I on the other hand cannot do this because I use an older version of Ubuntu on a small partition and it is a pain to upgrade distros and I hate the new interface, but from what I have read the new versions of Ubuntu will work with your kindle. You can always install Linux along side windows but if you don't know a thing about resizing partitions, then i wouldn't suggest it because u might wipe your windows os and that would suck. BTW ubuntu is completely legal compared to what I was questioning above about windows. Yay Linux!!!
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
thanks
how do I check the status of my windows OS and I am running UBUNTU 12.04 alongside my windows OS
Im not that familar with Ubuntu as I would like to. I tried to sync my kindle to ubuntu, try to root my kindle and it was very complex
more than on windows
Funny, I find it easier to root on Ubuntu than on windows, no driver problems and then binary bash script works the same way. I am unfamiliar with "syncing" a kindle, especially on Ubuntu, I never sync mine I just use it like I would a flash drive, drag and drop files to it. Should work the name way on Ubuntu I think, I use an older version of Ubuntu that can't open it as an MTP device, so i just push and pull with adb. My only problem with helping you doing this on Ubuntu is your using 12.04, and I don't use the new ones because I don't like the new interface, i use gnome based desktop environment. So I can't exactly say where to click to open the kindle, but if I had to guess you can simply open a nautilus window from that bar on the left of the screen, any thing on it that's a folder will do, from there there should be a pane on the left if the window where the kindle would show up as a device u can click and view the contents of. I'm kinda basing this off what happens when I use a camera or iPod on mine, I assume kindle would show up the same way. If this is not the case you may have to install a package for an MTP browser, again not familiar with the interface and from what I remember trying it last time they took out the synaptic package manager by default, so I would have to tell u a command to run in a terminal to install it instead if need be. Tell me how it goes I will try to help as much as I can.
I kinda feel like I put too much information in this post...
Oh and as for telling your windows os, it may tell if you right click my computer( on start menu) and hit properties. Another way to throw a guess at it is ask yourself "Do you live in the USA?". Windows I think will say something about it in the properties of my computer though, if not you can try running winver from the run box it may display something useful. I don't have my PC booted up into windows right now so i can't verify this, and I kinda host a minecraft server on it in Linux most of the time so I don't shut it down unless I need to and its empty.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Nastynate1219 said:
I have a problem I have a kindle fire and getting the drivers installed is the problem
I have install the ADB driver but am having extreme difficulties getting the MTP drivers to work
I have tried everything (every solution on Google)
and nothing works
I've tried the "Media Transfer Protocol Porting Kit"
I tried to get Microsoft help they gave me the run around and confused me even more.
I tried to Go to Device Manager, under Portable Devices, right-click on MTP USB Device, and then click on Update Driver Software to update the MTP USB device driver. I then Selected “Browse my computer for driver software” to locate and install MTP USB device driver software manually.I then Selected “Let me pick from a List of device drivers on your computer”. A list will show installed driver software compatible with the device but I dont know what to pick
can someone help me please
is there an alternative solution to this Problem?
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=2612503
It should help if you have the same problem I had.
mwhatsup said:
Try this:
http://forum.xda-developers.com/showthread.php?t=2612503
It should help if you have the same problem I had.
Click to expand...
Click to collapse
Registered just to say this is the solution to the issue as described above.
Thanks a bunch!
The answer to get a Kindle recognised by Widnows 7
plug kindle into pc
ignore unpleasant driver message
enter device manager and click the following:
update driver software
browse my computer for driver software
let me pick from a list of device drivers on my computer
select 'portable device' from the list
select 'standard mtp device' from the list
select 'mtp usb device' from the list
click next"
This worked after hours of trying to get my Kindle to work in windows 10!
Thanks @Achilles1783