Related
On my computer it's fine. I just want to listen to my music. Damaged or not.
What causes Damaged SD cards?
Try to reformat it and see if it works. There are several things that can cause a card to go bad.
I have and just spent countless hours getting music on the card and I downloaded an .apk when I got error (Installed and worked fine) then just got error.
How to safe me from these from happening again?
All my apps are gone due to app2sd bummer
sillyshy said:
How to safe me from these from happening again?
Click to expand...
Click to collapse
Just do what you always prolly do. Just make sure to unmount before you disconnect. Sometimes the cards can just go bad. Just make sure to get a name brand card and get a class 6 (you don't have to). It was prolly just a fluke.
Sandisk 8gb class 2 I do unmount error for past 3 months. Know I can't get back my apps2sd to rework after I did a format.
How did you format it? In the phone from UI? If so then it erased your ext partition.
Look in HERE for good guide on how to check what partitions do you have and to format and repartition.
Good luck
If your running swapper, you need to turn it off before mounting. Thats the main cause if its not actually damaged.
I had that happen to me when I tried using Apps 2 SD 2. It said it corrupted my SD, and when ever I tried to unmount from the PC, it would freeze up. I just backed it up, deleted all my partitions, reformated and made new ones. What ever A2SD you're using, make sure you follow tuts correctly.
If you use AppsToSD to partition your card and you get an error saying that your SD card is corrupted or damaged, ignore it. Take out the card, format the Fat32 partition on your PC (a full format, not quick erase). When it's done, both the Fat32 and ext2 partitions will be there. I have experienced that problem several times.
Also, you can do adb to get the files off the ext2 partition before you use the phone to remove the partition and re-format the card.
Well guess what all I did was turn off my phone overnight and charge it. This morning turned back on got the same good message after spending 5 hours putting music onto my card. So this time I am doing a full format of the card and just using fat32 nothing more no apps2sd I think that may be my problem. Cause when using it I don't get the option to safe remove the sd card in SD card settings.
My 2-yr old 8gig Sandisk Class 2 SDHC suddenly went kaput and won't be detected by my Topaz.
This sd card has been previously fat32-formatted and worked for 2 yrs.
Lately, before flashing a cooked ROM, I ran the mtty1.42 if that matters
Now, my phone won't even detect another sdhc (4gig Sandisk, Class 6) which is working fine on my wife's Raphael and/or my PC.
The error message the defunct 8gig SD card gives when connected via card reader to my XP sp2 machine is:
Exception Processing Message c0000013
Parameters 75b6bf7c 4 75b6bf7 c 75b6bf7c
[Cancel] [Try Again] [Continue]
You can't format something that is undetected, right? Any clue, please? Thanks.
Sandisk SDHC Class 2 goes dead, and won't get detected
My 2-yr old 8gig Sandisk Class 2 SDHC suddenly went kaput and won't be detected by my Topaz.
This sd card has been previously fat32-formatted and worked for 2 yrs.
Lately, before flashing a cooked ROM, I ran the mtty1.42 if that matters
Now, my phone won't even detect another sdhc (4gig Sandisk, Class 6) which is working fine on my wife's Raphael and/or my PC.
The error message the defunct 8gig SD card gives when connected via card reader to my XP sp2 machine is:
Exception Processing Message c0000013
Parameters 75b6bf7c 4 75b6bf7 c 75b6bf7c
[Cancel] [Try Again] [Continue]
You can't format something that is undetected, right? Any clue, please? Thanks.
Yea that happens my 1yr 8Gb class 6 dies a while ago but that was from my using it for readyboost and eboostr(unrelated).Now i got this 4gb class 2 thats pretty fast If you had swapper then i think the card could be damaged, try formatting that sd card in recovery mode.
there is a way to reformat the card if its not physically damaged but it seems like yours is. I dont rmr the commands to do it in gparted, butits possible
I lost my sd card data flashing a rom. Could not mount it even thru recovery. Got a card reader, but it won't format it.
Using Mini Partition Tool to troubleshoot. I am not at a point where it shows three partitions. The main 16gb unallocated, logical. The ext3 unformatted 500mb, primary (think I did that by mistake when trying to recover partition). And a 32mb unallocated, logical. All zero used memory.
I need to get back to one partition allocated, primary. Then I can get sd data back on it and reformat thru recovery.
Again using Mini Partition Wizard
Any help please!
OK,
I got it repartitioned as primary and formatted, bu sd card from pc now.
Hope phone recognizes it.
Will update, if I need further help.
Ken
If you want a good program to format your sd card, try SD Formatter.
Download and install that, plug in your sdcard into your sd card reader and format it.
Choose Full Erase On (if possible) and Resize On. It will format your sdcard to factory default and that means even the ext partition will be gone too.
Well, all transferred. Still won't mount. Says can't mount either of the dev/blocks mmcb1k0p1 and mmcb1k0.
Staus bar says sd card damaged.
?????
musashiken,
Thanks, typing while you posted. Based on my last post should I still do that?
Ken
Yeah I think you should try to reformat again with the program I suggested, as that will full format your sd card.
Once done, put your sd card back to the phone and create ext partition in recovery.
At work now but will be working on it.
Thanks
Ken
musashiken,
Thanks, appreciate all your help
That program worked, and I am back up and running
Ken
Glad it worked for you. My sd card kept giving me problems and I have to use this every few rom flashes.
I have a similar problem. I installed a new 32 gb SDHC card in a CDMA Hero running Cryogenmod. All was working well for about 10 days, then I got an error that no SD card was found. I had the original card and tried to get to the Clockwork recovery, no luck. Finally, through Rom manager, (flash alternate recovery to Ramon, then back to Clockwork, I was able to boot into recovery.
I still cannot format the new SDHC card, through Recovery, Windows 7, or the Panasonic program listed above. The Windows format option sees the card as a FAT 121mb card, so does the above program. Is this new card toast? It came with a lifetime warranty from Kingston, but I am mad that it did not make 2 weeks.
Any help would be greatly appreciated.
Craig
If sdformatter did not work it may be bad.
I always had good luck with it.
Did you have all options set per instructions?
I seen to be the only guy left with this problem. I have burned Nookie FROYO to an 8gb card. Using Mini tool partition wizard i then extend the last partition to cover the unused space. Then the Nook boots fine but gives me the 'damaged sd card' error. I tried the Vold method people used on older NF builds, but that seems just to ruin the image. If i don't resize the partition, everything runs fine and i can use the very limited free space on he card as normal. I wanted to try Easeus instead of minitool, thinking it might be something in the software, but i can't get Easeus to see the card at all after it is burned.
Can anyone help?
any advice on where to go here? I also asked at android central, and not getting any hits there either?
Thanks,
Brian
I've also tried deleting the sdcard partition and recreating it the right size. Since resizing didn't work, I thought this might. But it didn't. Still getting the 'Damaged SD card' error.
How is it that I'm the only one out there having this issue? Very frustrating.
-Brian
had same problem through the sd card in my fascinate and tried to format didn't work then plugged in my phone to my usb cable then unplugged went back and it auto formated for me so now i have my nook sd card all good just a little help
Well, I tried that as well. I plug the NC in, and it shows up as two different USB devices. E and F on my Win 7 machine. After quite some time waiting, I can actually open drive F in windows. Unfortunately, when I unplug my NC and try and remount the SD card, it doesn't do anything different. Still gives me the damaged SD card error.....
What else can I do here?
-Brian
I formatted and re-imaged my nook today from 1.0.1 Rooted to stock.
I then manually updated to 2.1 for flash capability.
Now I want my Root back.
For some reason the NOOK won't boot off of the SD Card anymore, it just ignores it until it's booted and I can see the files on the SD card.
I've imaged my SD Card with multiple versions of CWM, shut off my nook, inserted the SD card and plugged in a USB cable to initiate the process.
Is it possible that it requires the "Nook" USB cable to start the boot off of SD Card process or will the cable for my Droid Incredible work as well?
It's the only thing i can think of at this point that is causing the problem.
I won't get my nook cable till tomorrow so i can't test it.
Thanks,
Turmith
You don't need the cable to boot off the sd card, all the cable does is turn the thing on.
You are probably not flashing your card right, it's not simply a matter of copying files over, there is data that needs to be put on the card that isn't part of the files you can see.
If you are using an old nooter or autonooter card, it's probably corrupted or something. You don't want to use those old rooting processes anyhow.
The rooting process is also different now than in previous releases. You should do some reading on how to make a bootable cwm card and what the new rooting process for 1.2 is.
Thanks,
I believe you are right, the sd card isn't being flashed correctly.
I tried following the instructions here http://forum.xda-developers.com/showthread.php?t=1054027
Still got the issue where the nook would completely ignore the sdcard yet read it once it was booted.
So i tried formatting the sdcard with my Droid Incredible, then flashed it using windiskimger using the instructions provided in the link above.
Now when i try to boot off the card i get a blank black screen(never gets to "Read Forever" screen.
I have to remove SD Card, hold power button in(10 sec), release and then hold Power button in again(10 Sec) to get the nook to boot back into 1.2
I'm considering doing the 8 failed boot thing and seeing if it will restore 1.0.0 or something at this point.
Any suggestions?
Well that's progress ;-) at least it's trying to boot from the sd card now even if it's not succeeding.
are you using your droid as a uSD adapter for your computer, or do you have a dedicated uSD reader? that might be your problem. I'd try using a separate card reader.
You can get something like this basically anywhere for under $10. Try target/walmart/kmart/staples or like i said basically anywhere ;-)
I don't use windows for flashing but i've noticed some people saying they have luck with some programs for flashing more than others, try reading around, maybe you'll find an alternative to windiskimager that works better for you.
P.S. Formatting before flashing doesn't do anything at all. The flash should erase anything on the card and replace it exactly with the contents of the image you are flashing, regardless of whether it's freshly formatted or filled with 10 years of irreplaceable photographs
I'm not so sure it's the sdcard reader(which is internal to my Dell Laptop)
I switched from a 8gb sd card to a 2gb sd card(to make sure the SD card wasn't causing a problem) and pulled down a SD version of Nookie Froyo 2gb(to make sure CWM wasn't the issue either) just to see if i could get the thing to boot.
Same thing as occurred again.
It's become apparent that Winimage is either not doing it's job or I've somehow miss-configured the thing to not work correctly.
Winimage seems to only be writing one partition to the sdcard. In addition the Nook won't even attempt to boot off the sd card unless it's been formatted by either the nook or my droid prior to imaging. To me this indicates winimage isn't actually writing a image as much as it is copying files(and only the 1st partition at that).
Next step is to Uninstall Winimage, removing an left over configuration files and re-installing. If that doesn't work I'm going to try switching computers.
If that doesn't work then i'm going to look for a new Imaging program.
If anyone has any insight, it'd be welcome.
Well I can officially state my opinion that WinImage sucks...
I downloaded WinDiskImage and within 5 minutes I had my Nook 2.1 Rooted.
Thanks for your help.
Hi,
I just got myself a Nook Color with version 1.2 update and I am planning to root the device from a microSD Card with CM7 or Honeycomb. But before I start, I have two basic queries:
1. Which rooting will give a better and stable web browsing experience - CM7 (Gingerbread) or Honeycomb
2. Can I store and view my personal files (e.g, movies) from the microSD Card which will boot my Nook Color with CM7/Honeycomb? I am very concerned about this, as the Nook Color v1.2 comes with only 1 GB of free space for personal files storage and so I need to store my movies in mircoSD card. At the same time, I don't want to change the stock software thus violating warranty, so I have to root using a microSD card.
I am very new to this, so will appreciate your response very much. Thanks in advance.
Dazed378 said:
Hi,
I just got myself a Nook Color with version 1.2 update and I am planning to root the device from a microSD Card with CM7 or Honeycomb. But before I start, I have two basic queries:
1. Which rooting will give a better and stable web browsing experience - CM7 (Gingerbread) or Honeycomb
2. Can I store and view my personal files (e.g, movies) from the microSD Card which will boot my Nook Color with CM7/Honeycomb? I am very concerned about this, as the Nook Color v1.2 comes with only 1 GB of free space for personal files storage and so I need to store my movies in mircoSD card. At the same time, I don't want to change the stock software thus violating warranty, so I have to root using a microSD card.
I am very new to this, so will appreciate your response very much. Thanks in advance.
Click to expand...
Click to collapse
1. Without a doubt cm7. Honeycomb will unfortunately be forever buggy.
2. Yes you can use the left over storage on your SD card for files, music, videos, app etc.
And FYI you can root the internal memory and if you need to return for warranty then you can just return to stock and b&n will not know a thing but if you are going to run off the SD card make sure that it is a sandisk.
Sent from my NookColor using Tapatalk
The thing to remember if you want to access the 4th partitiion for storage is that you have to do it while the SD is in the NC. Win xp will only see the first partition which has only about 155 megs.
Thanks a ton! I have few more quick questions.
1. What is the most stable CM7 version for rooting 1.2 version Nook Color as of today?
2. Will the rooted nook be able to play AVI video files? What app I need to download for that?
3. I found that PDF page load is very slow in my Nook Color. What app do you suggest for a good reading experience?
Once again, thanks in anticipation.
1. 7.0.3 is the latest stable version of CM7, however, most people keeps up-to-day with nightly builds.
2. it should, if not, install Rock Player Lite, it plays virtually everthing
3. Either Adobe Reader or Alkido would do the job
Not able to copy files to uSD card which boots CM7
Hey thanks for your all your support. I was able to install CM7.0.3 on my 1 GB uSD card and also installed Adobe Reader and Moboplayer. Everything works fine, except when I connect my NC to my PC, and then turn on USB Mass Storage on NC, I can only explore my Nook Color (showing as F: drive) to copy files. I cannot open/explore my SD card, though the PC shows the uSD card as "Removable Disk (E. When I try open this E: drive, I get the message "Please insert a disk in E: drive".
Also, my NC does not seem to identify the SD card. When I go to Settings -> Storage, it shows total space unavailable under SD card. Even when I open Moboplayer, I get the message "There is no SD card, make sure it is usable". I could only play videos copied to my NC internal memory.
I was told that I can use the leftover space of the uSD card to copy personal files, but I have no success on that front yet :-(. Any idea/suggestions how to fix this issue?
More information:
In my NC Storage Settings, it shows:
1. SD card: Total space unavailable, Available space unavailable.
2. Internal storage: Total space 525 MB, Available space 449 MB
3. Additional storage (emmc): Total space 1 GB, Available space 63.51 MB
Wondering what is 2nd one (Internal storage)? Is that the data partition of my SD card? If yes, how can I copy personal files there?
Did you say you are using a 1GB uSD? IMO, that's way too small for what you want to do. I would recommend either a 4 or 8GB sandisk card to allow you enough space for files and the OS. Remember that this is also your boot disk and the cm7 files are taking up most of the available space on a 1GB card. Just sayin......
Sent from my NookColor using Tapatalk
I have ordered for a 16 GB class 4 SanDisk uSD card. I had a 1 GB uSD card at hand, so wanted to test with that first before I receive the 16 GB card. And as I said, I had no prob at all installing CM7.0.3 on the 1 GB card and if I am not wrong the card still has hunderds of MB memory free. My question is why can't I explore the SD card when I connect my NC to PC thru' the USB cable?
Dazed378 said:
I have ordered for a 16 GB class 4 SanDisk uSD card. I had a 1 GB uSD card at hand, so wanted to test with that first before I receive the 16 GB card. And as I said, I had no prob at all installing CM7.0.3 on the 1 GB card and if I am not wrong the card still has hunderds of MB memory free. My question is why can't I explore the SD card when I connect my NC to PC thru' the USB cable?
Click to expand...
Click to collapse
I don't recall the specific partition sizing of SASD but I would suspect there is no space available on the uSD after SASD creates the first 3 partitions... thus no partition 4 to be mounted as /sdcard.
Ok, thanks. As a mentioned in couple of posts back, any idea what is the "Internal Storage" of 525 MB total space that shows up in my storage settings? It is different from the emmc storage, because that shows up as the third storage option with 1 GB total space.
Ok - just found this thread and had to ask:
I'm running a stock 1.3 on the eMMC, and CM7.1 on a 16G micro-SD.
When I boot into the stock ROM, I see that my SD is mounted, but that the stock ROM mounted the /boot partition, rather than the /SD Card partition.
Is there a way to set the stock rom to boot /SD Card, or hide the other three from it?
Thanks!
traumadog said:
Ok - just found this thread and had to ask:
I'm running a stock 1.3 on the eMMC, and CM7.1 on a 16G micro-SD.
When I boot into the stock ROM, I see that my SD is mounted, but that the stock ROM mounted the /boot partition, rather than the /SD Card partition.
Is there a way to set the stock rom to boot /SD Card, or hide the other three from it?
Thanks!
Click to expand...
Click to collapse
To my knowledge, no, you cannot make the stock OS see any but the boot partition of the SD card. Both stock and your CM7 card can access eMMC storage, but stock can only see the first partition of your card. If you want a stock and a CM7 installation to share one /sdcard partition, you will have to set up a dual boot on internal storage (mine is linked in my sig).
If you just want to have some SD storage available to your stock install, you might be able to stretch the card's /boot partition and store some files in there, but I don't know if your SD install would remain stable. You could always back up your card as a disk image and try it out.
Taosaur said:
To my knowledge, no, you cannot make the stock OS see any but the boot partition of the SD card. Both stock and your CM7 card can access eMMC storage, but stock can only see the first partition of your card. If you want a stock and a CM7 installation to share one /sdcard partition, you will have to set up a dual boot on internal storage (mine is linked in my sig).
If you just want to have some SD storage available to your stock install, you might be able to stretch the card's /boot partition and store some files in there, but I don't know if your SD install would remain stable. You could always back up your card as a disk image and try it out.
Click to expand...
Click to collapse
I would also like to know the answer for how to make the /boot partition larger on various images to allow sufficient room when booted from eMMC. I tried doing this with EASEUS Partition Master but it will not let me resize the boot partition. Any other options to solve the issue? The only other options is to swap cards when you know you are booting off eMMC and that is a pain.
hikersc said:
I would also like to know the answer for how to make the /boot partition larger on various images to allow sufficient room when booted from eMMC. I tried doing this with EASEUS Partition Master but it will not let me resize the boot partition. Any other options to solve the issue? The only other options is to swap cards when you know you are booting off eMMC and that is a pain.
Click to expand...
Click to collapse
What are you trying to accomplish?
What is your running system?
Why do you want to expand the boot partition?
votinh said:
What are you trying to accomplish?
What is your running system?
Why do you want to expand the boot partition?
Click to expand...
Click to collapse
Sorry, I guess that I could have been more clear in what I am trying to do. I have a rooted nook color 1.1. I burned the image for the dualboot phiremod/Honeycomb that is approximately 3.5 Gb. I burned it to an 8 Gb card and then expanded the 7th (/sdcard) partition to use the space which is available when booted to phiremod. When I boot (with the card installed) to eMMC via J4mm3r's u-boot menu, my rooted 1.1 comes up but sees the /boot partition as the SD card. Since it is the /boot partition, it only has 80 Mb free which is not enough for Titanium Backup, etc. If I could make the /boot partition larger (say 2 Gb) then everything would work as desired.
1. I don't use dual boot option so can't help you
2. I don't use either Phiremod nor Honeycomb so can't help you but
a. I think the NC should still the left-over of the uSD card. if not
b. Try using MiniTool Partition wizard to expand the boot partition and see what happens. Not so sure if it allowed to do so.
hikersc said:
Sorry, I guess that I could have been more clear in what I am trying to do. I have a rooted nook color 1.1. I burned the image for the dualboot phiremod/Honeycomb that is approximately 3.5 Gb. I burned it to an 8 Gb card and then expanded the 7th (/sdcard) partition to use the space which is available when booted to phiremod. When I boot (with the card installed) to eMMC via J4mm3r's u-boot menu, my rooted 1.1 comes up but sees the /boot partition as the SD card. Since it is the /boot partition, it only has 80 Mb free which is not enough for Titanium Backup, etc. If I could make the /boot partition larger (say 2 Gb) then everything would work as desired.
Click to expand...
Click to collapse
Mmm, I think you maybe just need to make up your mind, or deal with the limitations--have your cake or eat it, because you can't do both. That said, I see no reason EASEUS wouldn't let you expand the boot partition, unless there's just no unallocated space, in which case you need to shrink your storage partition first. I don't know whether your card would boot properly with an expanded boot and random files in there, but you should be able to move the partitions around just fine.
Still, your better bet is to decide what's going to be your primary OS and stick with it. You can even dual-boot from eMMC and have two full OSes, but as long as you're using the SD as a boot drive, you're going to be trading off its ability to serve as storage for your interal OS.
Edit: sorry, didn't realize how old the thread was...was trying to find my info with the forum search. ^^;
In the original post the user asked if you could use the microSD for both booting/rooting and for storage -- when I tried this, I got a "SD Card must be formatted" error in my rooted Nook. I let it rty to format the card (then let Windows format it) and -then- I was able to store on the SD card.
But when I rebooted my Nook Color, it got stuck Infinite-looping the Nook Color splash screen. =\
I'm about to root it again, and I'd like to use the same SD card I use to root to have some storage space on it. I (had) a 4GB microSD card, but because the slot is in the worst place it could possibly be on the device...I've already managed to get it wedged inside the casing. =\ The drive still works but I'd rather not have to worry abotu swapping cards in and out and in and out; maybe I have fatter fingers than It hink, but that SD card slot is a pain in my arse.
What did I do wrong my first go 'round? I had a 4GB card, so I used the 4GB CWM image for it. Is it...really simple, and I need to format it into two partitions in windows; set 1GB aside for the CWM boot disc and the other 3GB would be available for file storage?
1. use SD formatter
2. if you used a 4GB CWM image, did you manually update it to the latest build? If not, just grab the 1GB image in the quote at the top of this thread: updated CWM. If you're planning to wipe it right after, it doesn't matter how big it is.
Also, regarding the OP and my response, I later found this link I'd saved about pointing stock to the storage partition of a CM7 SASD card: http://forum.xda-developers.com/showpost.php?p=13668471&postcount=529
I haven't tried it or seen anyone report back after trying it, but there it is if anyone wants to give it a go.