I seen to be the only guy left with this problem. I have burned Nookie FROYO to an 8gb card. Using Mini tool partition wizard i then extend the last partition to cover the unused space. Then the Nook boots fine but gives me the 'damaged sd card' error. I tried the Vold method people used on older NF builds, but that seems just to ruin the image. If i don't resize the partition, everything runs fine and i can use the very limited free space on he card as normal. I wanted to try Easeus instead of minitool, thinking it might be something in the software, but i can't get Easeus to see the card at all after it is burned.
Can anyone help?
any advice on where to go here? I also asked at android central, and not getting any hits there either?
Thanks,
Brian
I've also tried deleting the sdcard partition and recreating it the right size. Since resizing didn't work, I thought this might. But it didn't. Still getting the 'Damaged SD card' error.
How is it that I'm the only one out there having this issue? Very frustrating.
-Brian
had same problem through the sd card in my fascinate and tried to format didn't work then plugged in my phone to my usb cable then unplugged went back and it auto formated for me so now i have my nook sd card all good just a little help
Well, I tried that as well. I plug the NC in, and it shows up as two different USB devices. E and F on my Win 7 machine. After quite some time waiting, I can actually open drive F in windows. Unfortunately, when I unplug my NC and try and remount the SD card, it doesn't do anything different. Still gives me the damaged SD card error.....
What else can I do here?
-Brian
Related
On my computer it's fine. I just want to listen to my music. Damaged or not.
What causes Damaged SD cards?
Try to reformat it and see if it works. There are several things that can cause a card to go bad.
I have and just spent countless hours getting music on the card and I downloaded an .apk when I got error (Installed and worked fine) then just got error.
How to safe me from these from happening again?
All my apps are gone due to app2sd bummer
sillyshy said:
How to safe me from these from happening again?
Click to expand...
Click to collapse
Just do what you always prolly do. Just make sure to unmount before you disconnect. Sometimes the cards can just go bad. Just make sure to get a name brand card and get a class 6 (you don't have to). It was prolly just a fluke.
Sandisk 8gb class 2 I do unmount error for past 3 months. Know I can't get back my apps2sd to rework after I did a format.
How did you format it? In the phone from UI? If so then it erased your ext partition.
Look in HERE for good guide on how to check what partitions do you have and to format and repartition.
Good luck
If your running swapper, you need to turn it off before mounting. Thats the main cause if its not actually damaged.
I had that happen to me when I tried using Apps 2 SD 2. It said it corrupted my SD, and when ever I tried to unmount from the PC, it would freeze up. I just backed it up, deleted all my partitions, reformated and made new ones. What ever A2SD you're using, make sure you follow tuts correctly.
If you use AppsToSD to partition your card and you get an error saying that your SD card is corrupted or damaged, ignore it. Take out the card, format the Fat32 partition on your PC (a full format, not quick erase). When it's done, both the Fat32 and ext2 partitions will be there. I have experienced that problem several times.
Also, you can do adb to get the files off the ext2 partition before you use the phone to remove the partition and re-format the card.
Well guess what all I did was turn off my phone overnight and charge it. This morning turned back on got the same good message after spending 5 hours putting music onto my card. So this time I am doing a full format of the card and just using fat32 nothing more no apps2sd I think that may be my problem. Cause when using it I don't get the option to safe remove the sd card in SD card settings.
My 2-yr old 8gig Sandisk Class 2 SDHC suddenly went kaput and won't be detected by my Topaz.
This sd card has been previously fat32-formatted and worked for 2 yrs.
Lately, before flashing a cooked ROM, I ran the mtty1.42 if that matters
Now, my phone won't even detect another sdhc (4gig Sandisk, Class 6) which is working fine on my wife's Raphael and/or my PC.
The error message the defunct 8gig SD card gives when connected via card reader to my XP sp2 machine is:
Exception Processing Message c0000013
Parameters 75b6bf7c 4 75b6bf7 c 75b6bf7c
[Cancel] [Try Again] [Continue]
You can't format something that is undetected, right? Any clue, please? Thanks.
Sandisk SDHC Class 2 goes dead, and won't get detected
My 2-yr old 8gig Sandisk Class 2 SDHC suddenly went kaput and won't be detected by my Topaz.
This sd card has been previously fat32-formatted and worked for 2 yrs.
Lately, before flashing a cooked ROM, I ran the mtty1.42 if that matters
Now, my phone won't even detect another sdhc (4gig Sandisk, Class 6) which is working fine on my wife's Raphael and/or my PC.
The error message the defunct 8gig SD card gives when connected via card reader to my XP sp2 machine is:
Exception Processing Message c0000013
Parameters 75b6bf7c 4 75b6bf7 c 75b6bf7c
[Cancel] [Try Again] [Continue]
You can't format something that is undetected, right? Any clue, please? Thanks.
Yea that happens my 1yr 8Gb class 6 dies a while ago but that was from my using it for readyboost and eboostr(unrelated).Now i got this 4gb class 2 thats pretty fast If you had swapper then i think the card could be damaged, try formatting that sd card in recovery mode.
there is a way to reformat the card if its not physically damaged but it seems like yours is. I dont rmr the commands to do it in gparted, butits possible
I bought a NC on Friday and rooted it an tried to install Clockwork and the result was the black screen no boot. I have managed to reflash it to stock but now the system says the internal sd has an error and it won't let me format it. Funny thing is I managed to use diskpart on windows to repartition that partition while its pluggen in to usb and then the pc can read write but the nook still says the sd is bad.
Any thoughts on what I need to do to get nook to recognize the partition. Is there something else I need to do besides Fat32?
I'm having a similar problem with a Sandisk 16GB card. I can successfully burn Froyo to it, but after I load Froyo from SD, Froyo says that the card is damaged and needs to be reformatted. I tried using TE to makpart of the unused space and it doesn't accept the command. (says "makepart.sh" doesn't exist)
I formatted and re-imaged my nook today from 1.0.1 Rooted to stock.
I then manually updated to 2.1 for flash capability.
Now I want my Root back.
For some reason the NOOK won't boot off of the SD Card anymore, it just ignores it until it's booted and I can see the files on the SD card.
I've imaged my SD Card with multiple versions of CWM, shut off my nook, inserted the SD card and plugged in a USB cable to initiate the process.
Is it possible that it requires the "Nook" USB cable to start the boot off of SD Card process or will the cable for my Droid Incredible work as well?
It's the only thing i can think of at this point that is causing the problem.
I won't get my nook cable till tomorrow so i can't test it.
Thanks,
Turmith
You don't need the cable to boot off the sd card, all the cable does is turn the thing on.
You are probably not flashing your card right, it's not simply a matter of copying files over, there is data that needs to be put on the card that isn't part of the files you can see.
If you are using an old nooter or autonooter card, it's probably corrupted or something. You don't want to use those old rooting processes anyhow.
The rooting process is also different now than in previous releases. You should do some reading on how to make a bootable cwm card and what the new rooting process for 1.2 is.
Thanks,
I believe you are right, the sd card isn't being flashed correctly.
I tried following the instructions here http://forum.xda-developers.com/showthread.php?t=1054027
Still got the issue where the nook would completely ignore the sdcard yet read it once it was booted.
So i tried formatting the sdcard with my Droid Incredible, then flashed it using windiskimger using the instructions provided in the link above.
Now when i try to boot off the card i get a blank black screen(never gets to "Read Forever" screen.
I have to remove SD Card, hold power button in(10 sec), release and then hold Power button in again(10 Sec) to get the nook to boot back into 1.2
I'm considering doing the 8 failed boot thing and seeing if it will restore 1.0.0 or something at this point.
Any suggestions?
Well that's progress ;-) at least it's trying to boot from the sd card now even if it's not succeeding.
are you using your droid as a uSD adapter for your computer, or do you have a dedicated uSD reader? that might be your problem. I'd try using a separate card reader.
You can get something like this basically anywhere for under $10. Try target/walmart/kmart/staples or like i said basically anywhere ;-)
I don't use windows for flashing but i've noticed some people saying they have luck with some programs for flashing more than others, try reading around, maybe you'll find an alternative to windiskimager that works better for you.
P.S. Formatting before flashing doesn't do anything at all. The flash should erase anything on the card and replace it exactly with the contents of the image you are flashing, regardless of whether it's freshly formatted or filled with 10 years of irreplaceable photographs
I'm not so sure it's the sdcard reader(which is internal to my Dell Laptop)
I switched from a 8gb sd card to a 2gb sd card(to make sure the SD card wasn't causing a problem) and pulled down a SD version of Nookie Froyo 2gb(to make sure CWM wasn't the issue either) just to see if i could get the thing to boot.
Same thing as occurred again.
It's become apparent that Winimage is either not doing it's job or I've somehow miss-configured the thing to not work correctly.
Winimage seems to only be writing one partition to the sdcard. In addition the Nook won't even attempt to boot off the sd card unless it's been formatted by either the nook or my droid prior to imaging. To me this indicates winimage isn't actually writing a image as much as it is copying files(and only the 1st partition at that).
Next step is to Uninstall Winimage, removing an left over configuration files and re-installing. If that doesn't work I'm going to try switching computers.
If that doesn't work then i'm going to look for a new Imaging program.
If anyone has any insight, it'd be welcome.
Well I can officially state my opinion that WinImage sucks...
I downloaded WinDiskImage and within 5 minutes I had my Nook 2.1 Rooted.
Thanks for your help.
I followed the instructions to put cm7 on a sd card and everything installed and worked well but things loaded a little slow. I bought a couple sandisk class 4 cards for mine and a friends nook because those are supposed to be better. well I cant get it to work now! the old card still works but when i insert the new sandisk and the penguin starts loading i get a bunch of i/o errors and the cm7 logo ends up looping and never loads up. ive searched for a while. any help is appreciated.
Sounds like your card got corrupted for some reason. Consider flashing a nandroid and just redoing everything.
thanks for the reply. I dont quite know what that advice means. haha
well, that means, if you have backed up your card somehow, you're going to have to reinstall everything and flash back your entire system.
Considering that you are on a SD card system, there are only 2 ways you could have done this back up, 1 is a full on image via winimage or made a backup (nandroid) of your system+data. The nandroid or backup made by cwm would have to be written to your fake "sd" card after you remake your bootable cm7, then you could reinstall that information, provided that you have backed up what's on your "fake" sd, you can just copy that back over.
I still have a working bootable sd card with nightly 102 on it. I tried 2 new sandisk cards and get the i/o errors. ive tried formatting and redoing the new cards at least a dozen times. using winimage and whatever that other one is called windisk32 or whatever. very confused as to why its not working and where to go from here.
Oh, that's odd. I wish I had a solution for you. At this point, it almost sounds like it's an hardware issue as opposed to your software/sd cards.
You got a friend with a nook color you can test your cards out on? If they work on his nook, maybe your reader is messed up, dust/water/etc?'
Sorry, not of much help at this point.
its really weird. they wont work on the other nook either. but the old one does. is there a best way to format an sd card? when I couldnt get them to work initially i started messing with the partitions in disk management. i generally just use the nook to format them.
Well, get easeus partition manager and collapse them all, so a slow format and then try to write the image.
I was able to load everything onto another card. neither sandisk worked... crazy talk.
Well, I think we've established that it's probably how you're writing to your sd cards.
So assuming your software is good (md5 checksums match), then it's a matter of hardware.
2 suggestions, use another computer and try to burn on that.
Use a different microSD reader/writing device (do you use a usb device or is it built in or is it a SD card that you slip the micro one into?)
I'm having a weird problem with a Nexus One. It had a 2GB microSD card in it that seemed to go corrupt (all the file names went crazy) so I reformatted it and it happened again within minutes. So today I bought a new 8GB microSD card and and the Nexus now gives the error of "Blank SD Card - SD card blank or has unsupported filesystem." It is unable to format the card, but it doesn't give an error. I tried formatting the card to FAT32 on my computer, still the phone thinks it is blank/unsupported.
I'm hoping the SD slot isn't fried... any thoughts?
You could try reformating the SD card in a computer using SDformater with erase on.
I have the same problem for a few weeks now. My phone can't seem to read the sd card at all. Thought it was the sd card so I bought a new one, but problem remains. I know both cards work (have tested them in another phone and the computer reads them). I've tried formatting the card in the phone and reformatting with erase on using SDFormatter in my computer but my phone refuses to read it. Think it might be my sd slot as well...
Currently running CM 7.1.0. Haven't tried a factory reset or flashing another ROM (how would one go about doing that with no sd card?) as I'm not too keen to lose that data if I can help it.
Did you manage to fix it?
I was not able to fix it and after many hours of troubleshooting, so I gave up. Good luck to you, and please reply if you find a solution.