I'll try to keep this as short as possible. After installing Perception 9.5 on my phone my PCs started to fail to recognize the device. I was never able to get it to work with Odin but I was able to connect it to install Perception 10.2 hoping that might fix the issue (10.2 goes back to 897 whereas 9.5 was based off some Samsung 959 ROM). Unfortunately, it did not and I can't connect the device to any of the three PCs I have.
Either nothing happens or the PC says "usb device not recognized". Things I have tried:
Switched usb debugging on and off
Switched from kies to mass storage to media player
Removed and reinstalled drivers on all 3 PCs (2 32-bit Vista, 1 64-bit Win7). The drivers used were the ones in the FAQ thread.
Tried a different micro usb cable
I'm at a loss as to what else to try. I never had this issue before trying to flash Odin with Perception 9.5 on my device. Any suggestions?
Have you tried a different USB port on your computer? I was using one on the front of my computer for months and then lately it wouldn't connect and I went through the things you did and nothing worked. I am now using a USB port from the back of my computer and it is working fine. If you have wifi you could also look into an app called SwiFTP. It will allow you to transfer files between your phone and computer using your wifi instead of USB cable. Good luck, hope you get it figured out.
Tman42 said:
Have you tried a different USB port on your computer? I was using one on the front of my computer for months and then lately it wouldn't connect and I went through the things you did and nothing worked. I am now using a USB port from the back of my computer and it is working fine. If you have wifi you could also look into an app called SwiFTP. It will allow you to transfer files between your phone and computer using your wifi instead of USB cable. Good luck, hope you get it figured out.
Click to expand...
Click to collapse
Yep, I have tried a total of 14 usb ports on 3 PCs, lol. I have Doubletwist and Dropbox so I'm not worried about moving files and whatnot, but I do like testing out other ROMs so I need to be able to connect in order to use Odin. I also want to sell this phone soon and pick up an Inspire so I kind of need to get it back to stock.
Update: I tried installing the Vibrant drivers (since that's what Perception 9.5 was based off of) and I did a hard reset of the phone. PC is still unable to recognize the device. Is there a zip file out there that would allow me to revert back to stock?
There its the jh7 ota that design gears put out a while back, but you are taking a risk flashing anything without knowing you can use odin.
If you are going to try it, make sure you disable lag fix first
did u try adb?
did u try different USB cable?
can u get it into download mode?
tzabka said:
did u try adb?
did u try different USB cable?
can u get it into download mode?
Click to expand...
Click to collapse
Do not know what ADB is, I'll do some homework. Tried a different cable. Can get it into download mode.
@mcord, thank you, I'll google that. I'm not sure what else to try.
http://www.ponack.net/designgears/JH7_OTA.zip
mcord11758 said:
http://www.ponack.net/designgears/JH7_OTA.zip
Click to expand...
Click to collapse
Thank you, before I try that I want to go down the ADB route. Is this what I'm looking for or is there something more updated?
http://forum.xda-developers.com/showthread.php?t=502010
That is what you are looking for but I am not sure it will do you any good if your pc does not recognize your phone
i m oso having same problem. it charge but just won't connect to my pc. tried all but fail. same worries
Related
Note: I have searched the forums/google/youtube and done just about everything suggested.
I downloaded the SDK thinking my computer would notice the drivers ... it doesn't
I've installed, uninstalled, rebooted, power cycled, disonnected, reconnected, deleted, added etc... And Windows still does not recognize my Hero.
I don't know what to do now, as I thought I was going to just simply root and keep it moving, but I can't even get transfer contacts yet. Anybody have suggestions? Tips? Anything? I'm desperate here
Running: Vista x64
Make sure you download and install HTC Sync here and turn on USB Debugging on your phone by pressing menu, settings, applications, development, and check USB debugging. Also turn on unknown sources in the same menu in applications.
Dave2582 said:
Make sure you download and install HTC Sync here and turn on USB Debugging on your phone by pressing menu, settings, applications, development, and check USB debugging. Also turn on unknown sources in the same menu in applications.
Click to expand...
Click to collapse
I've done this too ... multiple times
Ok, try this link and download the htc drivers for the hero. When its looking for the drivers, browse for the location yourself and point it to the drivers that you downloaded (once you extracted it)
Dave2582 said:
Ok, try this link and download the htc drivers for the hero. When its looking for the drivers, browse for the location yourself and point it to the drivers that you downloaded (once you extracted it)
Click to expand...
Click to collapse
Sigh, tried this too. Windows just keeps telling me it cant find the driver - even when I direct it to the folder I've never had this happen with any other drivers I've installed
try removing the device in device manager and remove SDK and then go back through the steps of installing htc sync plug in your phone then run SDK
Kenpoman said:
try removing the device in device manager and remove SDK and then go back through the steps of installing htc sync plug in your phone then run SDK
Click to expand...
Click to collapse
Lol yea I've done that too. Maybe it's my system. I just plugged the damn thing in to my office computer and the phone recognized the USB, and on the computer I can see the mSD - none of which have happened on my system at home.
Thanks for all the help, if anybody else has suggestions feel free to keep em comin!
i have had problems with two of the four computers that I have it installed on.
both of them i think i used different versions of SYNC to get it to work but I can't remember.
Kenpoman said:
i have had problems with two of the four computers that I have it installed on.
both of them i think i used different versions of SYNC to get it to work but I can't remember.
Click to expand...
Click to collapse
I'd be happy to even get THAT far. My computer wont install drivers, my phone doesn't detect that its connected via usb, so I'm unable to mount. So there's no chance of even using SYNC yet lol. I guess I should be happy I didn't rush out to get that EVO just yet, cuz I'd kill over if I were having this problem with that phone. With the Hero, it's annoying cuz I can't transfer music or root yet.
The following accurately sums my emotional roller coaster the last 24hrs ...
... ... ... ... ... ...
I had a similar problem. First does you phone charge from the USB port? if not find a different USB cable. I have heard thicker is better but all the ones I have tried have charged it.
If it does charge but you can get Windows to recognize it as ADB then install PDAnet on your computer. You can find it with a google search. I got really frusturaded getting the drivers to work too, but PDAnet worked on the first try.
Fazulka said:
I had a similar problem. First does you phone charge from the USB port? if not find a different USB cable. I have heard thicker is better but all the ones I have tried have charged it.
If it does charge but you can get Windows to recognize it as ADB then install PDAnet on your computer. You can find it with a google search. I got really frusturaded getting the drivers to work too, but PDAnet worked on the first try.
Click to expand...
Click to collapse
I use the stock USB, which does charge it via any USB connection. However I notice that when I plug it into a system at work (Windows 7) the phone recognizes the USB connection and allows me to mount [I'm adding music I sent to myself this morning to the phone via this Win7 system]. Whereas the system at home the phone doesn't even see a USB connection present, so no mounting option. (I've tried all 4 USB ports on my personal laptop)
I'll DL PDAnet either tonight or tomorrow and see how this works. Thanks for the suggestion, and I'll keep you posted.
--off to find this XDA android app--
amorphouskev said:
I use the stock USB, which does charge it via any USB connection. However I notice that when I plug it into a system at work (Windows 7) the phone recognizes the USB connection and allows me to mount [I'm adding music I sent to myself this morning to the phone via this Win7 system]. Whereas the system at home the phone doesn't even see a USB connection present, so no mounting option. (I've tried all 4 USB ports on my personal laptop)
I'll DL PDAnet either tonight or tomorrow and see how this works. Thanks for the suggestion, and I'll keep you posted.
--off to find this XDA android app--
Click to expand...
Click to collapse
Pdanet is the only way my computer would recognize it also so that should work for u.
Papa Smurf151 said:
Pdanet is the only way my computer would recognize it also so that should work for u.
Click to expand...
Click to collapse
Didnt work. I kinda give up.
My phone only gives me the mount USB option when my PC is booting. As soon as I log in to windows that option goes away.
Sent from my HERO200 using XDA App
seriously try a to install a different version of sync first. i am using two different versions .
Kenpoman said:
seriously try a to install a different version of sync first. i am using two different versions .
Click to expand...
Click to collapse
Ok I've finally gotten the phone and computer to see each other. So I now have access to the SD card, however Vista still is not locating drivers.
Methods tried:
Installing, Uninstalling HTC Sync (various versions, new & old - including several reboots)
A tether program suggested in this thread
PDAnet
Directed Vista to folders with drivers.
Downloaded suggested drivers to Vista and pointed the system to particular folder
It's great that now I can take care of adding music etc... to the phone, but I had hopes of rooting as well, and it doesn't look like that's going to be a reality.
I'm still completely open to suggestions, and very grateful for all the assistance so far!
Since I just got this phone from asurion it's still on 1.5 would updating help? (I didn't want to update android for fear that I wouldn't be able to root, as I heard some update went out that prevented ppl from rooting)
-----------------
UPDATE:
I must have THE WORST Karma in the world, as soon as I posted this I stopped being able to see my SD card, and the phone keeps wanting to sync with HTC sync. No option to mount the USB anymore. I'm ready to bash my head and this phone repeatedly into a brick wall (after throwing my notebook off a balcony)
do you have sdk installed.
i had a hell of a time and ended up installing sdk in mydocuments instead of the root C:
again this is just one computer. my windows 7 machine was good from the start.
i haven't tried vista yet.
let me retrace my steps and see if i can help
this is also an option for rooting http://unrevoked.com/
i haven't tried it myself but you can download it to your phone and with a file explorer you can install it.
I've given up. This issue has made just pushed me completely away from Windows. I've realized that practically any USB device plugged in (except my old win mobile device) isn't recognized. Switching to Linux and hopefully a more compatible android experience.
Thanks for all the help!
Sent from my HERO200 using XDA App
My only thought (after having similar problems at work) is that there are still driver issues. I found a program called USBDeview that can be used to remove drivers left behind by other removal methods. It requires admin rights, so if you don't have those, sorry. If you still want to try, the program was a free download found using Google. Remove the drivers, reboot, and give it one more try.
Hey guys. first of all i would like to say that this is the best phone ive owned so Far!!
but for somereason when i try to connect my phone to my computer (windows 7 64bit Home Premium)it doesnt get recognized.
I can access mass storage, and i already installed the drivers. i even install kies. But the problem that i have is that when i toggle USB Debugging my computer pops up with a message saying USB Device Not Recognized. How can i fix this? i really want to figure it out because i want to make my Captivate be able to install 3rd party apps.
Any help is great Thank You Guys!!
viewsonic11 said:
Hey guys. first of all i would like to say that this is the best phone ive owned so Far!!
but for somereason when i try to connect my phone to my computer (windows 7 64bit Home Premium)it doesnt get recognized.
I can access mass storage, and i already installed the drivers. i even install kies. But the problem that i have is that when i toggle USB Debugging my computer pops up with a message saying USB Device Not Recognized. How can i fix this? i really want to figure it out because i want to make my Captivate be able to install 3rd party apps.
Any help is great Thank You Guys!!
Click to expand...
Click to collapse
Are you plugging your phone into the USB port in the rear of the computer? If not try this.
You should read up in the development section. You can get sideloading allong with many other goodies all through your phone without the use of a computer. That being said make sure you can recognize your phone on your PC before you go crazy
Captivate
Cog 2.2
mcord11758 said:
Are you plugging your phone into the USB port in the rear of the computer? If not try this.
You should read up in the development section. You can get sideloading allong with many other goodies all through your phone without the use of a computer. That being said make sure you can recognize your phone on your PC before you go crazy
Captivate
Cog 2.2
Click to expand...
Click to collapse
yeah before i actually try using putting on a rom, i wanna make sure i can connect to my computer first. and this is wierd right after i wrote this tread i plugged in my captivate and everthing installed correctly when i had usb debugging on but the one click root program still didnt detect my phone then i unplugged it and plugged it back in and now its not being recognized...wtf?
viewsonic11 said:
yeah before i actually try using putting on a rom, i wanna make sure i can connect to my computer first. and this is wierd right after i wrote this tread i plugged in my captivate and everthing installed correctly when i had usb debugging on but the one click root program still didnt detect my phone then i unplugged it and plugged it back in and now its not being recognized...wtf?
Click to expand...
Click to collapse
If you are looking to Root your phone there are ways without your pc. Just saying. Look up oclf in the market
Captivate
Cog 2.4
mcord11758 said:
If you are looking to Root your phone there are ways without your pc. Just saying. Look up oclf in the market
Captivate
Cog 2.4
Click to expand...
Click to collapse
Dear my hero. I LOVE YOU(no homo) i guess all i had to do was connect it to the back because now debugging works flawlessly and i now have sideloading!!!! thank you so much +rep
EDIT: i guess there isn't anyrep in this forum... but thanks anways ill put ur name in my signature haha
I am no expert. People helped me when I needed it. pay it forward
Captivate
Cog 2.4
Well to start out I have googled the drivers but still doesn't work... after bricking it pretty bad this happen and I fixed it by drivers while bricked to flash it to stock. But it has happened to me again after odin. Is it possible to just break it. Can someone link me working drivers maybe I've been trying ones that don't work or something
Sent from my SAMSUNG-SGH-I897 using XDA App
donk232 said:
Well to start out I have googled the drivers but still doesn't work... after bricking it pretty bad this happen and I fixed it by drivers while bricked to flash it to stock. But it has happened to me again after odin. Is it possible to just break it. Can someone link me working drivers maybe I've been trying ones that don't work or something
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
It's not recognized when the phone is on? Seeing as you posted this topic using your phone I assume so lol. Have you tried restarting your computer?
You can download the correct drivers here.
http://forum.xda-developers.com/showthread.php?t=731989
Make sure you are using the oem usb cable. I had the same problem, changed cables and it worked
some cheap cables are for charging ... bt headsets and other stuff the data cables dont connect, its just for power.
koreancanuck said:
It's not recognized when the phone is on? Seeing as you posted this topic using your phone I assume so lol. Have you tried restarting your computer?
You can download the correct drivers here.
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
deleted drivers restarted, installed drivers restarted and still not working. i am using the cord that came with the phone.
donks232 said:
deleted drivers restarted, installed drivers restarted and still not working. i am using the cord that came with the phone.
Click to expand...
Click to collapse
You gotta make sure that your usb port is directly connected to your motherboard (usually back of your computer).
same usb port that has always worked. ive tried them all by now anyway
now i cant tell you how this helped but... i downloaded drivers to a different computer odin crashed while flashing reflashed and im 100% stock atm. Didnt do ANYTHING to my computer plugged it in and its working.
donks232 said:
now i cant tell you how this helped but... i downloaded drivers to a different computer odin crashed while flashing reflashed and im 100% stock atm. Didnt do ANYTHING to my computer plugged it in and its working.
Click to expand...
Click to collapse
lolol
Duno what happened but I'm glad it worked out for you
I'm having the same problem with my captivate after flashing REDROM. It won't recognize it if I have USB debugging turned on...
i have a theory... were you on a GB or other i9000 based rom/kernel???
well, im still having a problem getting my computer to recognize the phone, i have to mess with it for a a while to get it to work. i really want to flash anew 2.3.3 rom but without being able to get everything working right im stuck in 2.1
is this a problem with my cord or the connection on my phone? or something weird with my phone after flashing it a lot. its currently back to odin stock, i have been trying to master clear it with no luck
TRusselo said:
i have a theory... were you on a GB or other i9000 based rom/kernel???
Click to expand...
Click to collapse
continiuum miui and cyanogen mod are the only things ive tried to flash
well it looks like i'm done. my phone will not show up on my computer and its currently bricked, although i have no issue getting it to download mode i cant do anything with it. unless someone knows some magic, looks like im downgrading to my gf's 4 year old busted up BB
Guys, this problem while connecting to the PC body is stupidly charging .... Even in the download mode Odin does not see a body that could be? Connect other Cappy-all OK.
donks232 said:
well it looks like i'm done. my phone will not show up on my computer and its currently bricked, although i have no issue getting it to download mode i cant do anything with it. unless someone knows some magic, looks like im downgrading to my gf's 4 year old busted up BB
Click to expand...
Click to collapse
it must be a powered usb hub, on my buddies laptop only 1 out of 4 usb ports saw his phone.
if you can get into download mode you arent bricked.
try installing i9000 drivers, or try another computer.
I came up with this a while back. Could very well be the same issue.
Let me start by saying I'm flash happy, and everyone that knows me personally, tells me to just quit jacking with my phone. NOT A CHANCE! I'm on my 3rd Cappy and shouldn't have ever exchange it again. I only had to in the beginning, because I was a newbie and had not know enough, but to get me in trouble.
I presume that this should work on all Windows OS's. I personally am running Vista Enterprise x86.
My symptoms:
Plug in phone to the usb and it there was about a 15% chance off being able to mount to usb, and Windows recognizing as a mass storage device. I tried un-installing drivers and re-installing and it would work some of the time, until the point came when parts of the driver install would fail. Then to the point when it was just completely unrecognizable. I thought I had it fixed because it seemed intermittent. In the middle of flashing to stock, something interrupted communication between the pc and my phone. Restarted the phone and attempted the flash again. Got a little farther and froze again. I had to use another pc that I had never connected my phone to before and I was able to use my jig to trigger download mode, because no buttons combinations would allow it into download mode.
This got me thinking that it was specific to my pc and not my cable or my phone.
My resolution:
I went straight to the registry and went to find. I deleted every entry that came up for "i897" and "i9000" excluding what was listed in the system volume information, as I didn't have permissions to remove any keys. I didn't keep count, but I probably deleted 300-400 registry keys that pointed to my phone. It seems as if with each developers rom that I had flashed, there was an entry for a different device. Don't quote me on that, because it is just my personal consensus. I also un-installed the samsung drivers, the unknown device driver, kies software, and anything associated with samsung. I noticed that next to all of the i9000 instances, the hex key for me started with 1000ee. So I also searched for the first part of that key trying to ensure that all instances of the device. Lastly, I deleted the samsung folder from program files.
I installed the samsung drivers package commonly listed in all of the other threads for x86 operating systems. I plugged in my phone and watched as each and every driver installed successfully. Keep in mind different drivers are installed depending on if you have usb debugging on/off, and the options for if the preferences on you phone are set to media, storage, or kies. I have multiple usb ports, however testing has shown me that, for me and my setup, I can plug into the port that I used when installing the drivers the final time, I am able to connect consistently. Earlier today, I tried to plug into a different usb port and it was an unknown device. I am led to believe, this is because I didn't un-install the unknown device on this particular port.
If you intend to work in the registry, please remember to always back it up first. You can always restore.
Hopefully my findings can help you as they did me. Happy flashing and I would like to thank the community for the dedication to assisting each other and the developers, for making flashing, better than crack cocaine. Flashing rom's doesn't make you twitch near as much as a crackhead.
Well since you can't use your phone you should sell it to me
Sent from my GT-I9000 using XDA Premium App
I didn't even install drivers, ubuntu got them for me
Sent from my SGH-I897 using XDA Premium App
I have tried both 64 and 34 bit drivers from Designgears odin one click stock ROM.
and cant get it to work!!! I am on Vista 64 Bit system
I need help!!
b-eock said:
I have tried both 64 and 34 bit drivers from Designgears odin one click stock ROM.
and cant get it to work!!! I am on Vista 64 Bit system
I need help!!
Click to expand...
Click to collapse
Try these: http://downloadcenter.samsung.com/c...3/SGH-i897_Captivate_USB_Drivers_5_02_0_2.zip
Drivers straight from samsung.
Edit: if you are trying to mount your phone as USB drive and are on miui or cm7 you need to install the nexus s drivers then. Samsung drivers will still work for download mode. A computer restart sometime does wonders too.
Sent from my SGH-I896 running MIUI.
I forgot I used those already too.
Sent from my HTC Inspire 4G using XDA App
When you installed the drivers, did you right click and run as administrator?
It would be helpful to know what mode you are trying to connect in, download mode, usb mass media, usb drive or tethering. Did you install heimdall by any chance? On your phone switch to a different option under usb settings and see if your computer will detect your phone then. Sometimes if you install a new rom, usb drive wont work until you switch it to mass media then back to usb drive.
Sent from my SGH-I896 running MIUI.
I had to grant administrator permission when I ran the installation, but I didn't right click and give it permissions from the start.
And I'm trying to connect in download mode.
Its only on eclair that it doesn't wanna see the phone, idk why. It saw it on MIUI(on I897 GB BL) but not on eclair/froyo BL
Sent from my I897 using xda premium
Have you tried downloading Kies (the full version, not mini) and reinstalling the drivers that come with it (they are under tools)?
I will try that, would you link me to it, cuz the last full kies I put on was in Chinese
I'm on my mobile. Go to Samsung home page. At the very bottom, you will see a tiny US flag. Click that, and you can change your location to the UK. Then just go to support
Thanks!!, I spanked your thank key!
Kies Mini is the only one that shows up for the Captivate specifically.
I dont see a full kies.
Didnt work..
Have you tried different cables? Different USB Ports? I'm beginning to think it may be a hardware problem, not software.
Had same problem before. It was the crappy USB cable u get with the phone. Switched it with a better cable and had no problems after that.
Sent from captivate running fasty 1.3
fastlude said:
Had same problem before. It was the crappy USB cable u get with the phone. Switched it with a better cable and had no problems after that.
Sent from captivate running fasty 1.3
Click to expand...
Click to collapse
The cable isnt crappy it like everything else gets worn out with regular use. Kinda like my knees.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I haven't tried a different cable, I will now., but it has never(not once) given me issues on my old computer(win XP)
I've had the same issue before. Get pdanet. That fixed it. and now I never have recognition issues (just don't forget to make sure usb debugging is enabled).
Crazy thing happened. I deleted all traces of Samsung from my computer and then restarted and left alone for awhile, then Viola it worked(WTF!!!!) I dont even have the drivers installed( after uninstalling them I deleted all Samsung Folders in Program files and Program Files(x86).
Its weird but im happy now thanks all of you for helping !!!!!!!!!
I also used my little Bro's HTC Inspire Cable instead of the OEM cable.
Did u try it with the other cable when u did this? Or with the stock cable?
Sent from my SAMSUNG-SGH-I897 using XDA App
I would buy a new cable on Amazon. Stock cable is literally less than$2
Alright, so before I get flamed, I have searched for over an hour today, and I have not been able to figure this out. I am not new to android, rooting, custom roms, and editing files, so I have tried a multitude of different things.
To the point, my Droid 3 will not connect to my computer. It did a couple weeks ago when I flashed the Liberty Rom onto it, but now it'll just charge and not go into the USB mode. The only reason I know it is charging is when I disconnect the cord it says the disconnected message.
I have tried a couple different cables, and I usually use my stock cable that came with my D3. I have also tried restarting my phone and computer. I even flashed the newest Liberty Rom the hard way and still no luck.
If someone could please help me out I would be VERY grateful as this is a PITA!!!
Thanks in advance!
My two cents would be, try different usb port and make sure you have the most current moto drivers.
Have had luck with uninstalling driver pack and reinstalling.
Hope that helps.
Sent from my DROID3 using XDA App
I appreciate the help, unfortunately uninstalling the drivers didn't work, unless I didn't get the correct drivers? I went into uninstall programs. In the device manager nothing came up for my phone or drivers. And I have also tried different ports but to no luck. Thanks again for the reply.
Have you tried a different computer? A different device? Let's just rule out that this isn't a computer issue first...
My Zune works in all of my ports, and my other computer. My Phone however does not. It does the same thing as my other computer, although I guess I don't have the drivers on the other computer, but it would still come up as usb connection right? All this does is charge, sometimes.
Have you tried Linux? No drivers are needed. download a live CD and see if it helps.
eww245 said:
Have you tried Linux? No drivers are needed. download a live CD and see if it helps.
Click to expand...
Click to collapse
Can you explain?
("Very Important"!) PLEASE POST!!!
After sufferring through the same issue and delving deeply for almost two days,I have found the culprit!!! IT IS THE USB CORD AND NOT THE DRIVERS OR ANYTHING ELSE!!"SIMPLY USE THE FIRST USB CORD THAT YOU USED THE VERY FIRST TIME YOU PLUGED INTO YOUR COMPUTOR AND THAT WILL RECTIFY(FIX) YOUR PROBLEM.(IT HAS TO BE THE VERY FIRST USB CORD OTHERWISE YOU WILL CONTINUE TO HAVE THIS PROBLEM UNTIL AND NO OTHER COMPUTOR WILL RECOGNIZE YOUR DEVICE UNTIL YOU DO WHAT I SAY.I thought it was the rooting of my phone that initially caused the issue or maybe an app,however,I found the culprit.The usb cord!!!(WHATEVER USB YOU USED FOR THE VERY FIRST ,STOCK OR NOT,IT IS THE ONLY ONE YOUR COMPUTOR WILL RECOGNIZE!!! I HOPE THIS HELPS THE MANY OF YOU THAT ARE HAVING THIS SAME ISSUE AND GOOD LUCK
Sent From My Droid 3 using TapaTalk
xFreak-a-Zoidx said:
RECTIFY(FIX)
Click to expand...
Click to collapse
Thanks for clearing that up for me, I haven't competed the fourth grade.
Dude could've just said use the USB cord that came with the phone, to each his own. I have 6 micro usb cables and only the moto official will allow me to do anything other than charge the phone via cpu.
Sent from my DROID3 using XDA App
The only problem is that I ONLY use the cord that came with my D3... Any way to flash the stock rom onto my phone from my phone and unroot? Then I can take my phone into verizon and get a new one... and a new cord..
ajgates92 said:
The only problem is that I ONLY use the cord that came with my D3... Any way to flash the stock rom onto my phone from my phone and unroot? Then I can take my phone into verizon and get a new one... and a new cord..
Click to expand...
Click to collapse
That sucks. You can find the .890 sbf floating around in android development and flash it, I believe it takes everything to stock including unroot.
Sent from my DROID3 using XDA App
I looked in the thread posted, but the link to the flashable zip is down. So i'm stuck at a standstill right now.
This link works fine: http://dev-host.org/t6y98oinbk1f/Droid_3_SBF_5.6.890.zip
blmetzger said:
This link works fine: http://dev-host.org/t6y98oinbk1f/Droid_3_SBF_5.6.890.zip
Click to expand...
Click to collapse
Can I flash that wit cwm or the stock recovery though? I can't use RSD or fastboot because nothing happens when I plug my usb into it.