I was trying to flash Clockwork Recoverylast night, but the links were down the files I needed. So I went to Modaco's site and there is a conversion file to EXT 4 which included Clockwork Recovery. I flashed it using Odin with no problems, and I even saw the Orange recovery screen prior to the phone rebooting. So it looked as if everything worked fine. At this point, it was 4 AM so after the flash it said to be patient and it would take a long time. So I just went to sleep. I woke up this morning to a dead Tab. I figured I would plug it in because maybe the battery ran out.
Plugging it in had no signs of life, so I left it on the charger for a while and eventually I saw the battery and the circular lines that rotate when the battery is charging. The lines however, were not rotating. Basically a "frozen" charge screen. I thought I would leave it on just in case if it was charging and no charge what so ever.
I cannot get into download mode, or recovery. I have also tried plugging in the device and Odin does not recognize it. Can anyone help? thanks
I followed these instructions:
http://droid-den.com/phone-guides/p...co-rom-and-kernel-on-samsung-galaxy-tab-guide
before posting looked through these tips with no success:
http://forum.xda-developers.com/showthread.php?t=888318&page=2
http://forum.xda-developers.com/showthread.php?t=885919
Please post in the proper forum.
I don't see how this has to do with development.
sorry, I figured since I was using the dev thread for info it would go here. Post to general? can a mod move to appropriate portion please? thanks
First post it in general forum.
Second, its not dead, just press volume down and hold power and it will boot into download mode and you can flash it with anything you want.
Thanks Tech, but it will not go into download mode (the sweeping android). It seems as if the battery died, and it is not taking a charge. I have tried holding the V down and power at the same time. Pressing V Down and holding power and all other combos. Cannot get it into DL mode.
Plug in the tab to an outlet and IMMEDIATELY push and hold the power button. My point is, don't let the tab display that battery with the stuck cursor. You want it to boot before that battery icon comes up. You might be using an older version of the kernel that doesn't have the fix for charging when its off.
From the Tab.
www.twitter.com/ayman07
solution
This happened to me. Just plug it in your PC, it will look like nothing is happening, but wait half an hour or more and all of a sudden your pc is going to recognize the usb connects. When this happens right away go to the download mode. Then you can flash whatever you want and fix your tab.
I hope that works for you.
PHEW! Thanks guys! Any idea what I may be doing wrong? I will retry flashing using Odin. I am using pit P1_20100909.pit
try power botton and volume up
xcobrax81 said:
PHEW! Thanks guys! Any idea what I may be doing wrong? I will retry flashing using Odin. I am using pit P1_20100909.pit
Click to expand...
Click to collapse
I think your problem is with the kernel. So thats what you need to flash. you can flash a whole rom that has a kernel. for future reference your battery should be at least 50% before flashing 100% is even safer..
xcobrax81 said:
PHEW! Thanks guys! Any idea what I may be doing wrong? I will retry flashing using Odin. I am using pit P1_20100909.pit
Click to expand...
Click to collapse
When I flashed the modaco kernel I did not use a PIT file. USA ATT tab. It didnt work the first time, and once i flashed it again it worked.
antiochasylum said:
When I flashed the modaco kernel I did not use a PIT file. USA ATT tab. It didnt work the first time, and once i flashed it again it worked.
Click to expand...
Click to collapse
That is what I did for my second turn and it worked like a charm. Thanks for the suggestions. I wanted to try out the CM7 Beta, but I know that Modaco is ext-4 and I think that conflicts with CM7, so I will worry about that some other time. I am done for the year
Again, thank you all for your help and suggestions.
xcobrax81 said:
That is what I did for my second turn and it worked like a charm. Thanks for the suggestions. I wanted to try out the CM7 Beta, but I know that Modaco is ext-4 and I think that conflicts with CM7, so I will worry about that some other time. I am done for the year
Again, thank you all for your help and suggestions.
Click to expand...
Click to collapse
Even a simple process of flashing custom kernel cause such trouble to you, I recommend you to wait till cm7 is stable, in the mean time, just flash other custom rom that use cwm..
Related
Anyone Experience this?
Phone was on stock firmware from AT&T (never been rooted)
Plugged Phone Into the computer & opened Odin3Excution v1.00 & booted the phone into Download Mode and clicked Start on Odin. looked back at the phone minutes later and the phone had a full green screen. waited & waited and neither the phone or Odin were making progress. pulled the phone off the USB pulled the battery. restarted the computer and tried again. Now the phone will not boot at all not even the at&t smart phone screen and it wont boot into recovery or download mode.
The phone is being processed through warranty, I was just wondering if anyone had any experience with this or knows what happened. Thanks!
BTW the phone was charged 100% and the sim & sd card werent in the device.
Move to Question Thread
Can a Admin move this to the question section. Sorry for posting in Dev.
Very interesting. Never heard of this. Pull the battery out and wait lets say 1h
Then plug the battery back and hold both volume buttons while inserting the USB. Dont touch the power button.
icezar1 said:
Very interesting. Never heard of this. Pull the battery out and wait lets say 1h
Then plug the battery back and hold both volume buttons while inserting the USB. Dont touch the power button.
Click to expand...
Click to collapse
Will do. Thanks. Any One else?
jdubdieslo said:
Will do. Thanks. Any One else?
Click to expand...
Click to collapse
You can try not waiting at all at first. Just pull it out, put it it and follow what I said earlier.
i had a green screen in the middle of a flash back to stock with ODIN one click (every usb device stopped working on my machine at once)
fired it back up in download mode and odin'd it...no problem
Yep.. Mine too, two times, except that the screens was Light Blue and Yellow..
Moved to Q&A.
Lol funniest thing that I read this thread and then thought, wow must be one of the lucky one's cause that never happened. Next thing i know I go to flash back to stock and when i look over it was the green screen. I was like NOOOOO! So now im trying to install the drivers on my bro's comp since my windows partition is being a...well you know. Tried to use heimdall but I don't have the stock bootloader....just the sbl. Can anyone throw me a bone?
tytdfn said:
Lol funniest thing that I read this thread and then thought, wow must be one of the lucky one's cause that never happened. Next thing i know I go to flash back to stock and when i look over it was the green screen. I was like NOOOOO! So now im trying to install the drivers on my bro's comp since my windows partition is being a...well you know. Tried to use heimdall but I don't have the stock bootloader....just the sbl. Can anyone throw me a bone?
Click to expand...
Click to collapse
Advice, if you don't wanna risk it, find a win machine and use odin one click downloader
Sorry to resurrect and old thread, but it was either this or start a new thread for the same problem.
I was flashing back to stock from Mosaic and this happened. Green screen and nothing else. Now it won't turn on or go back into download mode. Think a jig will help this?.
Edit: Waited about 10 mins and tried again. IT LIVES!!!!
it is worth a try of jig if key combo does not work.
the same thing just happened to me. i was using odin3excution v1.00 to flash back to stock before taking the phone in to AT&T to get the warranty replacement. i got the teal/green/blue screen at factortrfs, it just sat there and killed everything usb on my computer. i pulled the battery and tried to reboot into download/turn it on/plug it in, no response whatsoever. i have the battery pulled and im waiting to try again, but if that does nothing, what can i do? i could take it in and tell them it did this in the middle of the kies update, but is that even believable? any help is appreciated, i don't have a jig and making one is last resort. thanks brothersss
Hey all, just got my Captivate 2 weeks ago and successfully rooted and flashed with custom ROM following the directions on all the posts here. Last night, while attempting to switch from Paragon 3.0 to Phoenix 4.0, installation was aborted. After several unsuccessful recovery attempts through CWM, I finally followed directions and used Odin-one-click. Odin did its thing and phone rebooted immediately and got stuck in a loop.
ATT screen flashes on and off when phone is powered on. When plugged into PC, phone flashes empty battery and computer does not see the phone. I've tried just about every button combination I've come across and about every permutation of button/battery/USB/Odin combination on the PC to no avail.
Is my last resort the USB jig? Or are there other options? Any and all help would be appreciated. And thank you to all of you whose posts I used to get me this far.
Patiently awaiting any assistance......
If you can't get into dl mode a jig will be needed
Have you used odin before?
Do you know your build number
mcord11758 said:
If you can't get into dl mode a jig will be needed
Have you used odin before?
Do you know your build number
Click to expand...
Click to collapse
Build number.... inside of the phone I see 1010, REV 0.4
Is that what you were referring to?
Yes and that is what caused your odin problem
Read this
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Go to radio shack get a package of 100 k ohm resisters. Three twisted together in a tear drop shape. Touch the ends to the last 2 potions prongs closest to the head set jack. I have done this, it works.
http://forum.xda-developers.com/showthread.php?t=889128
Just in case this is how I enter dl mode
Take out sim, ext sd, and bat. In your case leave the bat out for like 10 minutes.
Put bat back in
Hold vol up and down
While holding plug in usb
maxyz said:
Hey all, just got my Captivate 2 weeks ago and successfully rooted and flashed with custom ROM following the directions on all the posts here. Last night, while attempting to switch from Paragon 3.0 to Phoenix 4.0, installation was aborted. After several unsuccessful recovery attempts through CWM, I finally followed directions and used Odin-one-click. Odin did its thing and phone rebooted immediately and got stuck in a loop.
ATT screen flashes on and off when phone is powered on. When plugged into PC, phone flashes empty battery and computer does not see the phone. I've tried just about every button combination I've come across and about every permutation of button/battery/USB/Odin combination on the PC to no avail.
Is my last resort the USB jig? Or are there other options? Any and all help would be appreciated. And thank you to all of you whose posts I used to get me this far.
Patiently awaiting any assistance......
Click to expand...
Click to collapse
Not sure if this is how you got into this situation in the first place, but did you disable the lagfix before flashing? If not, it may be what caused this.
mcord11758 said:
Just in case this is how I enter dl mode
Take out sim, ext sd, and bat. In your case leave the bat out for like 10 minutes.
Put bat back in
Hold vol up and down
While holding plug in usb
Click to expand...
Click to collapse
Thanks for the quick replies and assistance. The threads above were a revelation, I will try again to get it into download mode before making the jig. Keep your fingers crossed....
Gr8Danes said:
Not sure if this is how you got into this situation in the first place, but did you disable the lagfix before flashing? If not, it may be what caused this.
Click to expand...
Click to collapse
Did I disable the lagfix? I believe I did, I at least was cognizant of having to disable the lagfix, but it certainly is a possibility. Thanks for chiming in, appreciate all of it.
Someone please help
So I just tried to root my samsung fascinate 2.3.5 and i did the ODIN stock voodoo T959VKJ1.tar file using the PDA button and now my phone is stuck in boot mode and wont boot up properly. Please give me any steps to at least fix this to the original version.
b.smith1202 said:
So I just tried to root my samsung fascinate 2.3.5 and i did the ODIN stock voodoo T959VKJ1.tar file using the PDA button and now my phone is stuck in boot mode and wont boot up properly. Please give me any steps to at least fix this to the original version.
Click to expand...
Click to collapse
This is the captivate section not fascinate.
Sent from my SGH-I897 using xda premium
Hello all, I admire all of your work. I just recently hit a problem and was wondering if you could help.
I had unofficial froyo from designgears, and was trying to install voodoo lagfix. I set it as an update.zip, it ran through the whole set-up with the talking lady and everything. It said it was complete, then it rebooted into my recovery (2e, but I just recently flashed 3e, so I don't know why that happened).
Then, it was doing it's thing, but got stuck on "Installing multi-csc". I let that sit for about 5 minutes, but nothing happened, so I hit reboot now. It rebooted back into 2e recover, and again got stuck on "Installing multi-csc".
I tried turning it off, then opening odin3 and trying to get into download mode, but everytime I plugged it in, it went to recovery.
Now, I took the battery out and SIM card and tried plugging it back in, and it gets stuck on the charging screen that shows when it is turned off. It won't even load how charged the battery is...I have no idea what to do...
You should still be able to get into download mode with this method- Remove battery and sim for 1 minute then only put the battery back in connect your charging cable only to your phone then while holding the volume up and down plug it into your computer while the phone is off and it should go right into DL mode
Edit: I forgot to add that you must have Odin already open for this to work properly
Thank God for you, my good sir! This will change the kernel back to stock as well, correct?
That is correct. It will change kernel and modem along with rom.
ZaCaptivate said:
This will change the kernel back to stock as well, correct?
Click to expand...
Click to collapse
Yes.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
ZaCaptivate said:
Thank God for you, my good sir! This will change the kernel back to stock as well, correct?
Click to expand...
Click to collapse
Haha no problem this method has worked for without fail many times and yes it will if you are using Odin one click but your phone must be build 1009(This is more of a guide line people above 1009 have successfully used it I believe) or below
Hi,
I have done a lot of reading and searching, and I think I understand most of the basic pieces of what I am trying to do and how to do it. Let me explain.
Ultimately, I want to be able to install custom roms to my captivate.
Firmware: 2.2
Kernel: 2.6.32.9
Build: FROYO.UCKB1
I installed rom manager, but I see that with my hardware, I cannot install cwm recovery. It seems I need to downgrade my kernel using odin. Problem is, although I found the thread listing all of the kernels for download in zip format, I have no clue which one to use.
I found the instructions on how to reboot into cwm recovery, but without the new kernel, I cannot do it, at least that's what I gather.
Can you guys help me here? I know I am on the right track, but don't know what to do to go any farther. Also, I cannot get into recovery mode buy clicking the buttons. It seems I must now use adb. All I want to do at this point is reboot into cwm mode. Can that be so difficult.
Well, this is my first post. Thanks to all who reply.
Viper
3e recovery. Look in the stickies to fix that. OR flash another kernel (like Cog 4.x.x kernel) and flash a rom.
+1 to the above. Personally when flashing a custom ROM I just always start with JF6, the flash the green CWM update.zip file followed by the ROM, or if it's got an initial-kernel like many ROM's call for now days.
Quick stupid question...
Does the sim card need to be out to do this, or any of the other things I have been trying?
PghPittViper said:
Quick stupid question...
Does the sim card need to be out to do this, or any of the other things I have been trying?
Click to expand...
Click to collapse
It does not matter. The whole (remove SDCARD and SIM steps) in my opinion have always been false info. The only reason I'd remove anything would be the SDCARD if using a recovery that's untested to ensure it's not formatted or something like that.
error?
No matter what I try flashing with odin, I get this message:
<OSM> All threads completed. (succeed 0 / failed 1)
This indicates that the process failed. What gives?
Re-install your drivers. Then ensure the ODIN is open BEFORE connecting your phone in download mode. You can get the latest drivers in a package I made with ODIN here:
www.mediafire.com/?eyr42m5ilf03566
Edit: Also only use a genuine OEM cable when flashing. There are two many issues with non-oem cables and the usb data transfer they provide.
Need big time help now!!!!!!!!!!!!!! Possible Brick!!!
Now i have been playing with flashing roms. Now I have a real problem.
I flashed darky 10.2 i believe and now I am in a boot loop. It cycles between the white att screen and a colored pixelated screen.
I have been reading and researching for hours now. Present time 3:15 am. Research tells me that the cappy is pretty much un-brickable.
I KNOW I have to get into either download mode or recovery mode. I cannot do either.
I have researched this subject exhaustively, but my brain is fried now, and I work at 6:00 and need my phone.
What to do????
I emplore anybody up at this time to help.
TIA
PghPittViper said:
Now i have been playing with flashing roms. Now I have a real problem.
I flashed darky 10.2 i believe and now I am in a boot loop. It cycles between the white att screen and a colored pixelated screen.
I have been reading and researching for hours now. Present time 3:15 am. Research tells me that the cappy is pretty much un-brickable.
I KNOW I have to get into either download mode or recovery mode. I cannot do either.
I have researched this subject exhaustively, but my brain is fried now, and I work at 6:00 and need my phone.
What to do????
I emplore anybody up at this time to help.
TIA
Click to expand...
Click to collapse
What ROM were you coming from? Did you try all the 3 button combos? or battery pull/Vol+/- then plug in usb? Next best thing is a Homemade/bought Jig.
PghPittViper said:
What to do????
I emplore anybody up at this time to help.
TIA
Click to expand...
Click to collapse
Did you flash gingerbread bootloaders before flashing the ROM?
I am not amused by your phones performance
Did not flash gingerbread...
I apologize, my intent was not to amuse.
How now can I flash gingerbread if the phone wont stay powered on?
I ran home during my work break to check my replies.
Because I didn't flash gingerbread, I presume I was hasty in flashing darky becuause it seemed so great, is it possible to resurrect this phone?
I am feeling pretty discouraged.
Thanks and please continue to help.
As long as the phone shows any type of life its not Hardbricked and can be recovered with key combos or a Jig. Your fine. Get in to download mode and flash a clean stock and start over.
Entering recovery mode in my situation.
I am currently trying to hold the 2 button volume control and the power key.
The phone comes on to the att white screen, then goes black, then comes back on, etc...
I am very worried.
When I plug into the usb, it will connect to pc, then disconnect, then keep repeating this. I read that kies has an emergency recovery feature. But,, I can't connect to kies. Odin recognizes a port, but kies just says to connect your phone.
Any advice?
PghPittViper said:
I apologize, my intent was not to amuse.
How now can I flash gingerbread if the phone wont stay powered on?
I ran home during my work break to check my replies.
Because I didn't flash gingerbread, I presume I was hasty in flashing darky becuause it seemed so great, is it possible to resurrect this phone?
I am feeling pretty discouraged.
Thanks and please continue to help.
Click to expand...
Click to collapse
You don't need gingerbread BL for Darky 10.2. I've flashed Darky 10.2 before, his directions were pretty clear. I moved onto Fasty since his updates stopped. I suggest reading the stickies for making jigs or buying them as well. You can do it! & Good luck.
^what he said. You can try and taking out ur batter open odin, connect your phone hold Vol up and down insert battery. If that doesn't work you need a jig. Not hard to make, takes a little time though (if you peel a cheap cable for the plug that is)
Hi guys
I'm pretty much a newbie when it comes to flashing a rom such as ICS or any latest rom that is available for my Galaxy Tab so i really need help with this to avoid problems. First how do i know whether my galaxy tab is GSM or CMDA ? i checked my WIFI settings and it says GSM/WCMDA what does these means ? I can use 3G if you needed to know.
And what tools and applications do i need ? to flash a rom such as ICS or any latest stable rom. i just factory reset my Galaxy Tab GT P1000 already as it's causing problems for me such as freezing everyday and restart by itself.
Currently my Galaxy Tab is on 2.3.3 GingerBread Android. The stock version of it was Froyo i guess that is 2.2 right ? and yeah i updated my tab from Kies few months ago to gingerbread of course. And yes i already rooted my Galaxy Tab few months ago but i just factory reset it today i guess the root is gone now ?
What are the latest and stable ICS/JB version for my Galaxy Tab GT P1000 ? please do guide me to successfully installing them.
hope someone is able to help me with this as i am going to flash it today.
thank you very much
Edit is highlighted by blue font. Mistake highlighted by red font.
I was just about to write a guide for my niece, here goes: -
Please read other guides to be more understanding of flashing. Below is a quick step only. Just in case the good long guides are too long and too complex. Hopefully with a short guide + long guide, it's easier and cover both sides / requirements. Sorry that it was too short for dc2mx, hope he recovers well.
pre-requisite. --->>> magic action.
Hold power button 8 seconds and it will FULLY SHUTDOWN. Don't let it be ON whole night. Battery does not charge during DOWNLOAD mode and not charge in RECOVERY mode. That's why I write in step 16 about this magic 8 seconds fully shutdown.
Hold power button 4 seconds and it boots up.
Hold power button 12 seconds will shutdown then boots. Not adviced. Because it becomes boot-loop.
OK, may some filenames are wrong, but they carry the same meaning. Hence please forgive my short-coming or spelling mistake or naming error.
make sure battery is 100% charged up.
no need root, hence skip rooting step.
download this file >>>GB-Stock-Safe-v5<<< link is provided another time by http://forum.xda-developers.com/showthread.php?t=1881981 - thanks thanks thanks to priyana priyana priyana.
make sure to install USB driver first, then plug in TAB to PC, wait few minutes to let it recognize, install and stable_lise <<<stabilize>>>. Takes time. No need to copy anything into it. This is just to ensure that the drivers were installed properly and that it successfully recognized the device so that FLASHING can be carried out.
reboot holding VOL_DOWN to go into DOWNLOAD MODE. You should see the word DOWNLOAD with a big triangle symbol.
direct use Odin software to flash the >>>GB-Stock-Safe-v5<<< OVERCOME RE-STOCK version 5 (the file is TAR format), download link above. See more details somewhere else. Sorry for being lazy uncle.
make sure to select a file named <<<<mr.pit>>>> for the pit section, MUST.
select the <<<<rom file.TAR>>>> format for PDA <<<I wrote WRONG previously into phone section|>>>, MUST. Very terribly sorry to dc2mx and anyone else affected.
select <<<<modem.bin>>>> for phone section else can't call, but not need now, later will have, can skip. Unless you wanna stick to 2.3.3
tick 3 items, A = re-partition, B = auto-reboot, C = F.reset.time. MUST.
click FLASH, wait 2.5 minutes, finished, auto reboot. You should see the USB connect YELLOW highlight successful before able to click FLASH.
then reboot again into Download mode and Odin again to flash the KERNEL only <<<002001-Overcome_Kernel_v4.0.0.tar>>> because it contains most importantly CWM (clock work mod), which is a TAB_self_rom_flashing. (newbie term).
Then download a CM9 or CM10 or whatever you want. as for me, as of writing I'm using alroger's 8th November version. Thanks to alroger, humeros, cdesai, and so many more.....http://forum.xda-developers.com/showthread.php?t=1869477 Put into TAB's internal sdcard. Fastest flash. My external SD is cheap type, hence slow.
Flash it via reboot holding VOL_UP to go into RECOVERY mode. Select the file/rom that you chosen.
You'll see flash progress go to 10% then reboot.
Then reboot loop non stop. Hold power button for 8 seconds for it to shutdown fully.
Why? because flashing the first 10% puts in a new kernel with new MTD partition and everything behinds it can't recognize it, can't find it hence boot loop.
Enter RECOVERY again, reboot holding VOL_UP. If failed again. Don't worry, keep trying, I had to try 10 times. My first manual reboot went into CWM successfully but I didn't understand and realize, hence did not flash the file again. Then reboot normally, obviously it just boot-loops. Tried to go into CWM the 3rd time but not succesful, it just boot-loops. try so many times, with full shutdown and wait many minutes in between. I think around 10 times or more later went into CWM finally. God bless.
Reboot again into RECOVERY and flash one more time and WIN, DONE.
finished.
cx5 said:
I was just about to write a guide for my niece, here goes: -
make sure battery is 100% charged up.
no need root, hence skip rooting step.
download this file >>>GB-Stock-Safe-v5<<< link is provided another time by http://forum.xda-developers.com/showthread.php?t=1881981 - thanks thanks thanks
make sure to install USB driver first, then plug in TAB to PC, wait few minutes to let it recognize, install and stable_lise. Takes time.
reboot holding VOL_DOWN to go into DOWNLOAD MODE.
direct use Odin to flash the OVERCOME RE-STOCK version 5, download link above. See more details somewhere else. Sorry for being lazy uncle.
make sure to select mr.pit for the pit section, MUST.
select the rom file.TAR for phone section, MUST.
select modem.bin for phone else can't call, but not need now, later will have, can skip. Unless you wanna stick to 2.3.3
tick 3 items, A = re-partition, B = auto-reboot, C = F.reset.time. MUST.
click FLASH, wait 2.5 minutes, finished, auto reboot.
then Odin again to flash the KERNEL only <<<002001-Overcome_Kernel_v4.0.0.tar>>> because it contains most importantly CWM (clock work mod), which is a TAB_self_rom_flashing. (newbie term).
Then download a CM9 or CM10 or whatever you want, for me, as of writing I'm using alroger's 8th November version. http://forum.xda-developers.com/showthread.php?t=1869477 Put into TAB's internal sdcard. Fastest flash.
Flash it via reboot holding VOL_UP to go into RECOVERY mode. Select the file/rom that you chosen.
You'll see flash progress go to 10% then reboot.
Then reboot loop non stop. Hold power button for 8 seconds for it to shutdown.
Why? because flashing the first 10% puts in a new kernel with new MTD partition and everything behinds it can't recognize it, can't find it hence boot loop.
Enter RECOVERY again, reboot holding VOL_UP. If failed again. Don't worry, keep trying, I had to try 10 times.
Reboot again into RECOVERY and flash one more time and WIN, DONE.
finished.
Click to expand...
Click to collapse
Hi thank you for providing with this guide but it doesn't answer any of my questions i am asking but anyway, i am confused with step 4 i have already downloaded GB Stock Safe V5 from the thread you linked. what do you mean by install and Stable_lise ? i have my USB Cable connected to my Galaxy Tab and it shows as Removable storage. What do i need to copy in it ?
If it's possible can you provide much more detailed and clearer instructions ? which are definitely newbie proof.
EDIT: Nevermind i got what you're talking about but i did those 11 steps then now Odin says FAIL on the application about something unable to write partion or something like that. now my Tab is frozen on Do not turn off target screen, Did my Tab just got bricked ? how do i restart it ?
cx5 said:
I was just about to write a guide for my niece, here goes: -
make sure battery is 100% charged up.
no need root, hence skip rooting step.
download this file >>>GB-Stock-Safe-v5<<< link is provided another time by http://forum.xda-developers.com/showthread.php?t=1881981 - thanks thanks thanks
make sure to install USB driver first, then plug in TAB to PC, wait few minutes to let it recognize, install and stable_lise. Takes time.
reboot holding VOL_DOWN to go into DOWNLOAD MODE.
direct use Odin to flash the OVERCOME RE-STOCK version 5, download link above. See more details somewhere else. Sorry for being lazy uncle.
make sure to select mr.pit for the pit section, MUST.
select the rom file.TAR for phone section, MUST.
select modem.bin for phone else can't call, but not need now, later will have, can skip. Unless you wanna stick to 2.3.3
tick 3 items, A = re-partition, B = auto-reboot, C = F.reset.time. MUST.
click FLASH, wait 2.5 minutes, finished, auto reboot.
then Odin again to flash the KERNEL only <<<002001-Overcome_Kernel_v4.0.0.tar>>> because it contains most importantly CWM (clock work mod), which is a TAB_self_rom_flashing. (newbie term).
Then download a CM9 or CM10 or whatever you want, for me, as of writing I'm using alroger's 8th November version. http://forum.xda-developers.com/showthread.php?t=1869477 Put into TAB's internal sdcard. Fastest flash.
Flash it via reboot holding VOL_UP to go into RECOVERY mode. Select the file/rom that you chosen.
You'll see flash progress go to 10% then reboot.
Then reboot loop non stop. Hold power button for 8 seconds for it to shutdown.
Why? because flashing the first 10% puts in a new kernel with new MTD partition and everything behinds it can't recognize it, can't find it hence boot loop.
Enter RECOVERY again, reboot holding VOL_UP. If failed again. Don't worry, keep trying, I had to try 10 times.
Reboot again into RECOVERY and flash one more time and WIN, DONE.
finished.
Click to expand...
Click to collapse
thanks for this, it helps alot
can you provide links to the files?
I see there is a link for the >>>GB-Stock-Safe-v5<<< but I don't see links for
OVERCOME RE-STOCK version 5, the kernel is there but no OVERCOME RE-STOCK version 5..
thank you again
oh, and I suppose that "stable_lise" refers to stabilize?
See my signature for overcome new links.
(Actually same as his link)
It is GB stock safe v5, should no be called Overcome version 5.
Sent from my GT-P1000 using xda app-developers app
thanks priyana!!
I searched a lot about this matter and found all sorts of information..
I presume you know around the P1000, can you take a look at this thread, it is a more detailed question
http://forum.xda-developers.com/showthread.php?t=1988047
Hey guys i really need help, i just posted yesterday and i am shocked that no one replied to me.
This is what i did yesterday i downloaded GB-Stock-Safe-v5, Overcome_Kernel_v4.0.0.tar, and CM10 P1000, md5sum: 157da0dc187216fa924da45182e1307e
OK i am going to repost now i already did those 10 steps but during step 11 Odin says FAIL on the application about something unable to write partion or something like that. now my Tab is frozen on Do not turn off target screen, Did my Tab just got bricked ? how do i restart it ?
So i was unable to turn it off. it was out of battery today, thought it might turn on if i charge it back. but i was both right and wrong it does boots up but now it gives me a Phone and a yellow /!\ Computer icons now, Anyone knows what is happening ?
dc2mx said:
Hey guys i really need help, i just posted yesterday and i am shocked that no one replied to me.
OK i am going to repost now i already did those 10 steps but during step 11 Odin says FAIL on the application about something unable to write partion or something like that. now my Tab is frozen on Do not turn off target screen, Did my Tab just got bricked ? how do i restart it ?
So i was unable to turn it off. it was out of battery today, thought it might turn on if i charge it back. but i was both right and wrong it does boots up but now it gives me a Phone and a yellow /!\ Computer icons now, Anyone knows what is happening ?
Click to expand...
Click to collapse
Hi there. The phone-exclamation-pc thing is another download mode.
At least you still have your bootloader.
Just make sure in the mean time you powered it off and charge it for over 4hrs. You don't want the power to run out.
In the download mode, is Odin detecting the tab? if so, you should still have very good chance to revive it.
Now, question:
- did you use Odin v1.7 included in the GB-stock-safe-v5 package or using other? Remember it is important to use the correct Odin version.
There should be little reason for the flash to fail on repartition if you follow the guide. If you haven't got it, see my signature, and go there to get the PDF guide and jump to page 7.
If you have already followed exactly, then there is a chance you have a damaged internal NAND chip. There are ways to go around that, but lets not go there first.
priyana said:
Hi there. The phone-exclamation-pc thing is another download mode.
At least you still have your bootloader.
Just make sure in the mean time you powered it off and charge it for over 4hrs. You don't want the power to run out.
In the download mode, is Odin detecting the tab? if so, you should still have very good chance to revive it.
Now, question:
- did you use Odin v1.7 included in the GB-stock-safe-v5 package or using other? Remember it is important to use the correct Odin version.
There should be little reason for the flash to fail on repartition if you follow the guide. If you haven't got it, see my signature, and go there to get the PDF guide and jump to page 7.
If you have already followed exactly, then there is a chance you have a damaged internal NAND chip. There are ways to go around that, but lets not go there first.
Click to expand...
Click to collapse
Yes, i already connected my tab to power charger now. Of course i used Odin v1.7 that is included in GB-stock-safe-v5 package. but during Odin process i waited about 5mins then i went to see how is it going, then there's a FAIL in red above the first box. and my Tab is stuck a Do not turn off target mode.
I only did those instructions cx5 provided. So now i am stuck with Phone /!\ Computer icons screen. What am i going to do next ? And do you mean this guide ? https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1 if yes, i haven't read it yet.
This is what i did yesterday i downloaded GB-Stock-Safe-v5, Overcome_Kernel_v4.0.0.tar, and CM10 P1000, md5sum: 157da0dc187216fa924da45182e1307e
What are the differences between P1000L and P1000N ? which CM10 files are right for my tab ?
Are these files that i am going to need ? please do refresh this thread every 5 mins or so. since i need help i will be here too. thank you
UPDATE: OK i just connected my Tab to power charger. but when i unplugged it. it turns off. i guess i need to leave it there for 4 hours to charge it ? i can't check whether Odin are able to detect my tab since i unplugged it and it turns off.
UPDATE2 Hmm my tab is blinking, it was on Phone /!\ Computer Icons screen. but now it's blinking, i meant it went to Phone /!\ Computer Icons screen then back to black screen every 10 seconds. is this normal ?
yes, try charge for more than 4hrs and hope the power goes in.
cx5 instruction seems correct, but it is best to look at page 7 of the guide for 100% accurate placement of the files.
the P1000L/N are Latin American tab that has different touch screen driver.
priyana said:
yes, try charge for more than 4hrs and hope the power goes in.
cx5 instruction seems correct, but it is best to look at page 7 of the guide for 100% accurate placement of the files.
the P1000L/N are Latin American tab that has different touch screen driver.
Click to expand...
Click to collapse
Hmm ok i think i know what went wrong during Odin process. cx5 said select the rom file.TAR for phone section, MUST. but i just read this guide https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1 and it says click PDA and select GB_Stock_Safe_V5,tar and then click Phone.
i didn't click PDA as cx5 instructions didn't mention it. and that's why i am getting FAIL on Odin ?
Anyway, i guess i leave it to charge for 5 hours. then Test whether Odin is able to detect my TAB or not. see you in 5 hours later Priyana. hopefully you're online as i am not sure what to do next after Odin is able to detect my tab.
after charging, boot to download mode again, you may get that same screen like before.
In your PC prepare the Odin exactly like the page 7 of PDF.
Connect the tab to the PC and if you see the tab detected, just flash away, hopefully no error, and it should reboot itself if I am not mistaken, and you get stock GB rom.
Then just continue with the guide, to flash Overcome Kernel 4.0 tar.
After that you will have a CWM recovery, ready to flash CM10
priyana said:
after charging, boot to download mode again, you may get that same screen like before.
In your PC prepare the Odin exactly like the page 7 of PDF.
Connect the tab to the PC and if you see the tab detected, just flash away, hopefully no error, and it should reboot itself if I am not mistaken, and you get stock GB rom.
Then just continue with the guide, to flash Overcome Kernel 4.0 tar.
After that you will have a CWM recovery, ready to flash CM10
Click to expand...
Click to collapse
OK so i am currently charging my Tab and it's blinking from Phone /!\ Computer screen to black screen every 10sec above. Does this screen disappear after fully charging it ? it seems that i am stuck at this screen now. but i can't turn it off and go to the previous hold Volume down and hold power button Do not turn off Target download mode.
Or Does Odin is able to detect my Tab on this Phone /!\ Computer screen too ? since you said it's another download mode please do correct me if i am wrong
yes Odin should detect it at this screen too.
If it doesn't, it will be very hard to fix.
I am surprised that you can't turn it off. Doesn't sounds so good, as it may deplete the batt completely.
Did you try to press the power button for a few seconds (5-10 seconds) to force it off completely?
priyana said:
yes Odin should detect it at this screen too.
If it doesn't, it will be very hard to fix.
I am surprised that you can't turn it off. Doesn't sounds so good, as it may deplete the batt completely.
Did you try to press the power button for a few seconds (5-10 seconds) to force it off completely?
Click to expand...
Click to collapse
Yeah my Tab was turn on for a whole yesterday. since i can't turn it off as it froze at Do Not Turn Off Target download mode. and today i saw the screen was off. then i went to turn it on but nothing i guess the battery is depleted. so i went to charge it and tried turning it on. it does boots up but now showing me this "Phone yellow /!\ Computer screen.
Okay, i just tested trying to shutting it down by holding Power button for 10seconds. but it seems that i can't turn it off. but the Tab itself is a little hot.
I have another question to ask, now i am stuck in this screen, and i have no idea it's charging or not. is this normal ? or usually it shows it's battery charging notification ?
UPDATE: It seems that my Tab is now turn off? it's not showing me the "Phone yellow /!\ Computer screen" now. it looks like it's turn off. nothing there just black
just leave it like this with the charger for maybe 8hr, since it has completely depleted before.
Battery charging animation I heard resides in the kernel.
So if the tab is flashed incorrectly, the battery animation will not be there.
It should still be charging (hopefully). The only way to be sure is to leave it charging for really long.
priyana said:
just leave it like this with the charger for maybe 8hr, since it has completely depleted before.
Battery charging animation I heard resides in the kernel.
So if the tab is flashed incorrectly, the battery animation will not be there.
It should still be charging (hopefully). The only way to be sure is to leave it charging for really long.
Click to expand...
Click to collapse
Hmm Okay, I'm going to let it stay there charging for at least 8 hours +. So be sure to check this thread regularly priyana as i really need your help. Thank you very much
dc2mx said:
Hmm Okay, I'm going to let it stay there charging for at least 8 hours +. So be sure to check this thread regularly priyana as i really need your help. Thank you very much
Click to expand...
Click to collapse
Ugh.. i know that it's just 5 hours+ But i was trying to turn on my tab to test whether Odin can detect my tab. but it seems that it won't power on. i guess it's dead ?
Damn i should have waited for your reply first priyana before doing anything. i just didn't do a important step which is "click PDA and select GB_Stock_Safe_V5,tar and then click Phone" instead of "select the rom file.TAR for phone section, MUST" which i thought click phone and select the tar. but it wasn't my fault as someone here posted the instructions that is misleading and missing the important step. Oh well....thanks for nothing,
Anyway, priyana, i really appreciate you are trying to help me. thank you very much buddy
Don't give up. Just continue charging. Many have experienced worst. I don't believe yours is bricked.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Don't give up. Just continue charging. Many have experienced worst. I don't believe yours is bricked.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Erm.. i can't even turn it on so i guessing it's dead. i don't think i am able to bring it back alive though