Related
Hey,
So to get to this point I flashed the entire device back to stock 1.01, setup the BN account, rooted with Monster, setup youtube/gmail/market and tested. Everything works fine. I then used CWM to install the update to 1.1. Everything seems to work except that the market fails to connect and youtube just closes upon opening. I tried to fix the permissions, but that didn't resolve it. I also tried installing the Vendor.apk, but just keep getting a message about an invalid cert. Any ideas?
Yes had the same issues with R2 and also the touchscreen worked very strangely.
So went to a backup and loaded R1, that worked great.
I had the same problem. This fixed it for me:
1. Restore to stock 1.0.1 (Don't go from 1.0)
2. Register with B&N
2. Use latest autonooter
3. After you sign in to Youtube as instructed and get Market working, reboot
4. After you reboot, you'll notice that Market works, but Youtube force closes (I think this is where the problem is)
5. Uninstall Youtube (Clear Data first), and then install the signed Youtube .apk
6. After Youtube is working, then you can apply the prerooted 1.1 update.
After many frustrating hours of trying to get Market and Youtube to work, this is what worked the first time for me
I never did R2 but did do R1. My market worked fine but youtube didn't.
Anyway, if you have Titanium Backup then go in there and delete the cache from Youtube. Then go back and log into Youtube like you did with the original Autonooter setup. I think this will fix both. At least it got Youtube to work on mine
And if that didn't work for some reason try removing Youtube and installing it from the apk somewhere around page 20 of the thread.
Noah98 said:
I had the same problem. This fixed it for me:
1. Restore to stock 1.0.1 (Don't go from 1.0)
2. Register with B&N
2. Use latest autonooter
3. After you sign in to Youtube as instructed and get Market working, reboot
4. After you reboot, you'll notice that Market works, but Youtube force closes (I think this is where the problem is)
5. Uninstall Youtube (Clear Data first), and then install the signed Youtube .apk
6. After Youtube is working, then you can apply the prerooted 1.1 update.
After many frustrating hours of trying to get Market and Youtube to work, this is what worked the first time for me
Click to expand...
Click to collapse
I'll give this a try later today. Thanks.
bitnerd said:
I never did R2 but did do R1. My market worked fine but youtube didn't.
Anyway, if you have Titanium Backup then go in there and delete the cache from Youtube. Then go back and log into Youtube like you did with the original Autonooter setup. I think this will fix both. At least it got Youtube to work on mine
Click to expand...
Click to collapse
bitnerd said:
And if that didn't work for some reason try removing Youtube and installing it from the apk somewhere around page 20 of the thread.
Click to expand...
Click to collapse
The apk or the flashable install? The only apk I found wasn't signed correctly. I tried clearing the cache, but still no go. Just closes immediately.
I would try the flashable one. I did push the apk on mine but I think I later delete it. Besides I think the apk was the exact same as the one I had on there
I really think deleting the cache from Titanium Backup is what did it for me. Of course if you don't have it then getting it without the market makes it a little harder
Also try logging in with gmail and then going to the market. I see where one person said that fixed that for him. You might try gtalk. I just remember seeing the post and didn't have the issue myself
Some more info for you
Never tried this but if you're still having problems after all the stuff above with youtube then you may try removing data\data\com.google.android.youtube\shared_prefs That's what someone on page 5 of the thread recommended. I think I would just copy it off the nook and then remove it to see if it works
And if nothing else works with the market then there's a flashable vending app on page 24.
Not to threadjack but has anyone see an issue with DropBox with r1/r2 of this sideload? It just hangs on downloading and never does, evening erroring out.
bitnerd said:
I never did R2 but did do R1. My market worked fine but youtube didn't.
Anyway, if you have Titanium Backup then go in there and delete the cache from Youtube. Then go back and log into Youtube like you did with the original Autonooter setup. I think this will fix both. At least it got Youtube to work on mine
Click to expand...
Click to collapse
These and lots more grievances are described in my blog. Decad3nce answered to me that whatever my experience with r1 is irreproducible to him, then recognizes he used "wrong" kernel, decided to put signed_YouTube into his ROM r2 -- instead of more stable HQ YouTube I proposed a month ago. There's tons more of broken stuff both in r1 and r2, I won't quote the whole list here. Staying on 1.0.1 with fake build.prop is probably the best way to deal with 1.1.0 "upgrade".
---------------------------
fineoils.blogspot.com
aludal said:
These and lots more grievances are described in my blog. Decad3nce answered to me that whatever my experience with r1 is irreproducible to him, then recognizes he used "wrong" kernel, decided to put signed_YouTube into his ROM r2 -- instead of more stable HQ YouTube I proposed a month ago. There's tons more of broken stuff both in r1 and r2, I won't quote the whole list here. Staying on 1.0.1 with fake build.prop is probably the best way to deal with 1.1.0 "upgrade".
---------------------------
fineoils.blogspot.com
Click to expand...
Click to collapse
I don't know, but the youtube app for me when I goto certain youtube videos displays an HQ logo topright at beginning. Does that not mean HQ is working?
What else for you is broken. You state tons and yet with the exception of the XDA app and LCD density (which I suspect is more due to the B&N changes than his 1.1), everything works as good or better than on 1.0.1
Noah98 said:
I had the same problem. This fixed it for me:
1. Restore to stock 1.0.1 (Don't go from 1.0)
2. Register with B&N
2. Use latest autonooter
3. After you sign in to Youtube as instructed and get Market working, reboot
4. After you reboot, you'll notice that Market works, but Youtube force closes (I think this is where the problem is)
5. Uninstall Youtube (Clear Data first), and then install the signed Youtube .apk
6. After Youtube is working, then you can apply the prerooted 1.1 update.
After many frustrating hours of trying to get Market and Youtube to work, this is what worked the first time for me
Click to expand...
Click to collapse
What I did to get market working was to update it to 2.2.7, then upgrade to 1.1.
Sent from my LogicPD Zoom2 using Tapatalk
bitnerd said:
And if that didn't work for some reason try removing Youtube and installing it from the apk somewhere around page 20 of the thread.
Click to expand...
Click to collapse
How do I clear the data and uninstall the Youtube apk? It's now a system app and doesn't show up under "manage apps" I tried installing it again as an update but that didn't work. I uninstalled the update, but it still shows up under my "Extras". It just fails to open.
Market and Gmail are working fine.
Canadoc said:
What else for you is broken. You state tons and yet with the exception of the XDA app and LCD density (which I suspect is more due to the B&N changes than his 1.1), everything works as good or better than on 1.0.1
Click to expand...
Click to collapse
USB debugging doesn't work with this update. It keeps turning off which is a real pain in the butt. That on top of the XDA app being borked was enough for me to restore my old build.
USB Debugging and Market....
I found usb debugging turned itself off once connected to PC so I'm using adb over wifi for the moment. Otherwise, USB Debugging can keep itself running without problem and button savior works fine.
The newer market(vending.apk is about 2MB) doesn't work on 1.1 preroot. It worked on the first boot but after first app was downloaded/installed the market FC and would never open again. However, the old market(file size is about 1MB) came with autonooter works with 1.1 preroot. So if you've updated the market, try the older version.
Not sure about youtube, mine works but very slow when opening videos, takes forever to buffer
timmyjoe42 said:
How do I clear the data and uninstall the Youtube apk? It's now a system app and doesn't show up under "manage apps" I tried installing it again as an update but that didn't work. I uninstalled the update, but it still shows up under my "Extras". It just fails to open.
Market and Gmail are working fine.
Click to expand...
Click to collapse
I also am at this spot. and have the same question.
Anyone out there that can help or point me in the right direction?
Thanks
efaden said:
Hey,
So to get to this point I flashed the entire device back to stock 1.01, setup the BN account, rooted with Monster, setup youtube/gmail/market and tested. Everything works fine. I then used CWM to install the update to 1.1. Everything seems to work except that the market fails to connect and youtube just closes upon opening. I tried to fix the permissions, but that didn't resolve it. I also tried installing the Vendor.apk, but just keep getting a message about an invalid cert. Any ideas?
Click to expand...
Click to collapse
My exact problem... I have flashed back to 1.01 set it up autonootered it... its rooted and working
flash 1.1 to it and market and youtube fails...
I have tried monsters root and autonooter...
I have scrubbed boot , sytem and data clean before starting...
gonna try again and make sure I dont touch data after the initial install...
timmyjoe42 said:
How do I clear the data and uninstall the Youtube apk? It's now a system app and doesn't show up under "manage apps" I tried installing it again as an update but that didn't work. I uninstalled the update, but it still shows up under my "Extras". It just fails to open.
Click to expand...
Click to collapse
I had the same problem on mine. What I did was to open Titanium Backup, find Youtube under Backup / Restore, and do a Wipe Data on it. At that point Youtube started to work again and I had to log into my channel as in the original autonooter
bitnerd, that worked like a charm. Simple enough. Thanks.
No problem. If you have other things that you can't fix otherwise it may work there too. I've noticed one or two apps that behaved strangely and then were fixed by clearing the cache data
nookcolor 1.0.0 with official update to 1.0.1 then with autoroot, that enable android market, and run smoothly
after update to 1.1.0 use the following rom [ROM] Nook Color V1.1.0_r2, market won't run anymore, I tried to
use http://market.android.com to install new apps, but it doesn't work too. does anyone have the clue?
[ROM] Nook Color V1.1.0_r2
http://forum.xda-developers.com/showthread.php?t=932145
tried to restore to origianl 1.0.0 rom, but it boot to Clockwork Recovery everytime
what do you mean market wont run? if you are getting the server error message just wait eventually it will work. it seems like with the new market, google is changing settings on peoples accounts which will block your device from accessing the market. i had the same problem but the next day it was gone.
if you tried to put your nook back to stock and now its only booting into CWR go to the developers thread and they have multiple ways to recover your nook
here
and here
To restore to stock you need to remove the SD card and then press and hold the power button until it powers off and then press to turn on, wait until the N appears and press and hold power until it turns off and then repeat this process for like 8 times or so and it will then update the firmware to stock.
Im seeing the same thing.. Ver 1.1.0 and get the Market Server error everytime i try to launch the Market.
I updated to 1.1 and then booted with Autonooter 3.0 image. The Market works fine setup wizard was all I needed and all my apps are there. So, it's not definitely not the B&N 1.1 update causing the problem.
Also couldn't get the market to run after upgrading to 1.1.0
Press the icon and it would flash a white screen then back to the app folder. Youtube was doing this as well and I was able to fix it by removing and reinstalling, but I can't do this with the market apparently (just keeps running the install then saying market not installed)
I tried to make anflashable evrsion of the vending.qpk but it didn't even run because I have no clue how to make flashable packages for CWR.
Any ideas? Kinda sux not having the market
Sent from my Nookcolor using tapatalk.
fwdixon said:
Any ideas? Kinda sux not having the market
Click to expand...
Click to collapse
Don't use CWN and that ROM then (not that there's anything wrong with it).
Backup anything you don't want to lose by copying it your computer in any way you can / want.
Instead try going back to stock like described here...
http://www.nookdevs.com/Flash_back_to_clean_stock_ROM
Then update to 1.1 from official B&N update found here...
http://www.barnesandnoble.com/u/nookcolor-support-software-update/379002520/?cds2Pid=35758
Then boot with AutoNooter 3.0 from here...
http://forum.xda-developers.com/showthread.php?t=942424
Connect to WiFi and then just follow the setup wizard.
After that...run the market, agree to market terms and you're done!
FYI, I didn't have to use Youtube to get the Market to work. The Setup Wizard worked all on it's own.
Ok, let me rephrase. Any ideas on why I can't instal the market. Tips to get it reinstalled? I did this once on my phone and I had to remove all traces of the market first, hurt I can't remember where all the files and folders were located.
I like using CWR as it is what I am familiar with
Sent from my Nookcolor using tapatalk.
Market runs -but not well...?
Total newbie - seamlessly rooted NC 1.1 yesterday - (so grateful to developers!)
One of the only problems I have encountered is with Market -- I've searched and searched these forums to see if anyone else is having a similar problem -- but have yet to find anything.
I am able to access Market, and download apps with no problem. The only issue is when I view anything in the Market, it only shows roughly 10 results in any list I view. If I do a search, it may indicate that there are 754 results but will only list 10-12 of the results. Not a dealbreaker of course but if there's a work around, or fix, I'd love to know.
TIA
frillitup said:
Total newbie - seamlessly rooted NC 1.1 yesterday - (so grateful to developers!)
One of the only problems I have encountered is with Market -- I've searched and searched these forums to see if anyone else is having a similar problem -- but have yet to find anything.
I am able to access Market, and download apps with no problem. The only issue is when I view anything in the Market, it only shows roughly 10 results in any list I view. If I do a search, it may indicate that there are 754 results but will only list 10-12 of the results. Not a dealbreaker of course but if there's a work around, or fix, I'd love to know.
TIA
Click to expand...
Click to collapse
Use AppBrain app. You're on older android market.
Took the gapps zip from the Monster package and removed all files except the contents of META-INF and the vending.apk and flashed in CWR, market back .
frillitup said:
Total newbie - seamlessly rooted NC 1.1 yesterday - (so grateful to developers!)
One of the only problems I have encountered is with Market -- I've searched and searched these forums to see if anyone else is having a similar problem -- but have yet to find anything.
I am able to access Market, and download apps with no problem. The only issue is when I view anything in the Market, it only shows roughly 10 results in any list I view. If I do a search, it may indicate that there are 754 results but will only list 10-12 of the results. Not a dealbreaker of course but if there's a work around, or fix, I'd love to know.
TIA
Click to expand...
Click to collapse
Turn your NC to landscape.
So a co-worker of mine has his up on this and is able to get into the free B&N in store features while I have the same setup as he does but yet cannot see these features. Id really love to be able to use the "Read for free for an hour" feature.
Any ideas on what i can check?
Thanks,
there are a couple of different ways to root on 1.1. did you both use the same method of rooting?
I really want to figure this out as well..I'm on the verge of rooting. I want to know which of the following methods will result in BN in-store features being accessible:
1. Root from 1.0.1 using either:
a. Barebones Nooter
b. Autonooter
And then upgrade via CWM recovery to the stock rooted 1.1 rom....
OR
2. Root via Autonooter 3.0.0 from stock 1.1.
The problem with method 2 is that it is supposedly resulting in a reboot loop if clockworkmod is installed. Does anyone have any suggestions?
eyecrispy said:
there are a couple of different ways to root on 1.1. did you both use the same method of rooting?
Click to expand...
Click to collapse
I, the coworker, did the following and b&n in store works...
Installed factory 1.0.1.
Autonootered
Installed the prerooted 1.1.0
The OP (and I)did the following and b&n in store does not work...
Installed factory 1.0.1
Sideloaded factory 1.1 update.
Autonooter 3.0
acomiskey said:
I, the coworker, did the following and b&n in store works...
Installed factory 1.0.1.
Autonootered
Installed the prerooted 1.1.0
The OP (and I)did the following and b&n in store does not work...
Installed factory 1.0.1
Sideloaded factory 1.1 update.
Autonooter 3.0
Click to expand...
Click to collapse
Aha! We have some info here. I just rooted mine with Autonooter but also flashed the prenooted 1.1.0 via Clockwork. In the other thread relating to this issue, another user suggested that this allowed him to have in-store access.
The catch here is that flashing CWR with autonooter 3.0 puts the device into a bootloop with CWR. I used the CWR remover tool to get rid of that.
After work in about 2 hours or so, I'll try to stop by a local BN and see if I have the in-store features.
UPDATE: I tested this out and it worked. Looks the prerooted 1.1 is doing something right.
rohit275 said:
UPDATE: I tested this out and it worked. Looks the prerooted 1.1 is doing something right.
Click to expand...
Click to collapse
Or autonooter is doing something wrong.
Maybe autonooter caused all the in store access issues in the first place.
Everyone thought b&n 1.1 fixed it, but maybe since no one was autonootering 1.1 until recently, autonooter didn't have a chance to break it.
Looks like whatever autonooter does, the preroot 1.1 fixes.
Not necessarily. There is another thread in here, but I have 1.1v2 and no instore features.
-1.0
-sideloaded 1.0.1
-Nooter v2
-then autonooter
-then flashed 1.1 v2
Leko
I have v2 and no in store either.
Bought stock 1.0
updated to 1.01
autonootered
prerooted 1.1r2
cwr to 1.1 ghz rom
Went to B&N today and no in-store special access to B&N features.
Did you guys without in store features after rooting, use the in store features before rooting?
What worked for me, before updating a clean 1.0.1 to 1.1, I used the in store features, then sideloaded 1.1 then used autonooter 3.0. I tried in store features afterwards and it works for me.
zadlaf said:
Did you guys without in store features after rooting, use the in store features before rooting?
What worked for me, before updating a clean 1.0.1 to 1.1, I used the in store features, then sideloaded 1.1 then used autonooter 3.0. I tried in store features afterwards and it works for me.
Click to expand...
Click to collapse
I restored my NC to stock 1.0.1. Sideloaded 1.1.0. Prepped Auto-Nooter 3.0 on a microSD and then I went to a physical BN store. Had in-store features with my 1.1.0 unrooted and downloaded a book to read. Then I used my microSD with Auto-Nooter to root my 1.1.0 NC in the BN store (lol). After rooting, I had Market, Youtube, etc... but lost in-store.
My NC came with 1.0.1, I sideloaded 1.1 and rooted with Autonooter 3. Today, I finally had a chance to go to a B&N store to test the "in store" function. NC connected to store WiFi immediately and a popup message told me that I could read certain books for up to 1 hour in the store and provided a link to those books. Then, "shop" interface opened showing many books and an "in store" banner at the corners of them. Under the "price" button, there was another one that said "read in store". So far, everything was fine and I was getting ready to read it... When I tapped on the read in store button, another window showed up with a progress bar, a cancel button and a continue button; however, the bar never progressed and the continue button was grayed out (the only available button was "cancel" which took me back to the store). I tried this with 8-10 books, but the results were the same. I guess it is safe to assume that I dont have the in store functions any more
Can anyone help? Here's what happened. I rooted my nc then I was playing with for a while. Then I clicked on one off my files that I installed myself, clicked on it and my nc restarted. When it turned back on it had the nc boot screen instead of the customized boot up screen. When I tried setting it up again and signing on to my gmail account it was working. So I had to unroot the whole thing. Now everything works. But can someone explain why it restarted and kind of unrooted by itself? Thank ill really appreciate it.
Sent from my ADR6300 using XDA App
Perhaps a Software Update reset your NC.
What file did you run? Also, what firmware version is your Nook currently running vs what version was it running before?
My firmware version is 1.0.1 right now. It hasn't changed. I used autorooter 2.12.25.
I actually just had the same thing happen to me with mine. It's a 1.1 from the box. All I was doing was changing some wall papers, then re-booted to try and install a different keyboard but didn't get there before seeing there was an "authentication problem" and needed to reset. I noticed some quirks after I was playing in rom manager and tried to reboot into recovery from there...whoops. I flashed nookie froyo and didn't like it, and I think reverting back gave me some issues. I've unrooted and re-rooted as of last night. I think I may just exchange it while I have the option. I used the 1.1 image posted somewhere here to un-root and used auto nooter 3.0 to root.
This just happened to me. I think it had to do with verifying my books, making sure they are legal copy's or something. or maybe updating one of my subscriptions. (Don't know)
My Nook is updated with 1.1.0
I rooted with autonooter 3.0
My thinking is that I should de-register and re-root
Than access my nookbooks thru a market app.
[How To] rooted B&N (1.3) with market access working .... no really.....it's working.
My goal - a rooted 1.3 stock device that had full market access back the way 1.2 worked w/ market prior to the update.
I'll preface this by saying I've tried nearly everything from almost every post in XDA in the last month, but I still had no market access and had to side-load all my apks. I get the feeling that there are quite a few of us that tried manulNooter and various forms of tweaks but are still w/out market access so it is for us that I write this.
I read this today and with a slight tweaking of the steps, I now have ROCK SOLID full market access on the first try.
I'll flat out say that all of the work can be chalked up to other people's time and effort, it's only the steps that worked for me I'm outlining here.
Beforehand:
Make sure you have a bootable CWM card (linky)
Make sure you have updates 4.6.18 and 4.6.16a.
Get the B&N 1.3 update here since you're going to revert your NC back to stock
START:
1) Before updating to 1.3 firmware you are required to do a complete wipe (which requires an aborted power-up [simply hold power button down during the launch process] 8 times in a row - or MUCH easier: the following command using adbWirless ).
adb shell
echo -n -e "\x08\x00\x00\x00" > /rom/devconf/BootCnt
reboot
Click to expand...
Click to collapse
2) I waited for the whole B&N setup after the wipe and I went through the steps of registering the device to my B&N account, then I did a factory reset at the "Erase and Deregister the device". It relaunches B&N one more time. After restarting I simply shut down the device before registering it again.
3) I then plugged in my Nook via. USB cable to my PC. I copied the 1.3 update to the root folder of the NC via. the USB cable. You can obtain the 1.3 update here if you didn't earlier.
4) I unplugged the USB. After 2 min. the NC recognized the update, and it did it automatically. It went through a full boot and I then shut down the NC.
5) I put in my CMW SD card with 4.6.18 and 4.6.16a on it. I then plugged in my USB cable into my Nook again to force the launch of CMW
6) In the CMW backup menu, I launched from zip file the 4.6.18, then right afterwards, the 4.6.16a nooters.
7) I shut down the NC, removed the CMW card, and did a regular launch.
8) I chose ZEAM launcher as default
9) I went into ROM manager and fixed permissions.
10) I went into the Market, signed in, and accepted the info, and saw the full, beautiful market populate and I'm good to go.
Hopefully this is a fix that works for everybody.....
(and yes - I know there's a separate thread on how to re-root after 1.3, but it's more of a troubleshooting thread at this point and frankly there's SO much conflicting info. in there I thought it prudent to start a new thread)
jnmoriginpoint said:
My goal - a rooted 1.3 stock device that had full market access back the way 1.2 worked w/ market prior to the update.
I'll preface this by saying I've tried nearly everything from almost every post in XDA in the last month, but I still had no market access and had to side-load all my apks. I get the feeling that there are quite a few of us that tried manulNooter and various forms of tweaks but are still w/out market access so it is for us that I write this.
I read this today and with a slight tweaking of the steps, I now have ROCK SOLID full market access on the first try.
I'll flat out say that all of the work can be chalked up to other people's time and effort, it's only the steps that worked for me I'm outlining here.
Beforehand:
Make sure you have a bootable CWM card (linky)
Make sure you have updates 4.6.18 and 4.6.16a.
Get the B&N 1.3 update here since you're going to revert your NC back to stock
START:
1) Before updating to 1.3 firmware you are required to do a complete wipe (which requires an aborted power-up [simply hold power button down during the launch process] 8 times in a row - or MUCH easier: the following command using adbWirless ).
2) I waited for the whole B&N setup after the wipe and I went through the steps of registering the device to my B&N account, then I did a factory reset at the "Erase and Deregister the device". It relaunches B&N one more time. After restarting I simply shut down the device before registering it again.
3) I then plugged in my Nook via. USB cable to my PC. I copied the 1.3 update to the root folder of the NC via. the USB cable. You can obtain the 1.3 update here if you didn't earlier.
4) I unplugged the USB. After 2 min. the NC recognized the update, and it did it automatically. It went through a full boot and I then shut down the NC.
5) I put in my CMW SD card with 4.6.18 and 4.6.16a on it. I then plugged in my USB cable into my Nook again to force the launch of CMW
6) In the CMW backup menu, I launched from zip file the 4.6.18, then right afterwards, the 4.6.16a nooters.
7) I shut down the NC, removed the CMW card, and did a regular launch.
8) I chose ZEAM launcher as default
9) I went into ROM manager and fixed permissions.
10) I went into the Market, signed in, and accepted the info, and saw the full, beautiful market populate and I'm good to go.
Hopefully this is a fix that works for everybody.....
(and yes - I know there's a separate thread on how to re-root after 1.3, but it's more of a troubleshooting thread at this point and frankly there's SO much conflicting info. in there I thought it prudent to start a new thread)
Click to expand...
Click to collapse
There is no 4.6.18 update - did you mean 4.518?????
Haven't tried this as I am using CM7 nightly builds ... but
Files that you need are here:
http://forum.xda-developers.com/showpost.php?p=17235819&postcount=1
Best regards,
-boggsie
docfreed said:
There is no 4.6.18 update - did you mean 4.518?????
Click to expand...
Click to collapse
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
jnmoriginpoint said:
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
Click to expand...
Click to collapse
Thanks for giving this a shot and posting your experience. I am hoping that one of the smart developer types will work on a Manualnooter (let's say 4.7.0) that will take us from stock 1.3 to root with a fully functional Market. Please, I know you are out there.
By the way, if you load CM7 with a -200 nightly or later then you will not need the LCD density fix as it has already been incorporated. Happy hunting!
jnmoriginpoint said:
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
Click to expand...
Click to collapse
Did you update flash? Thats what causes the loop, I had the same thing happen to me and had to start again from scratch. Make sure you don't update flash through the market or this will happen again.
bobzdar said:
Did you update flash? Thats what causes the loop, I had the same thing happen to me and had to start again from scratch. Make sure you don't update flash through the market or this will happen again.
Click to expand...
Click to collapse
THANK YOU SWEET JESUS
I decided to revert to stock and every time I turned my nook off, there was no return. Every time I reflashed, after I nootered I updated everything from the market. I spent 2 hours trying to find the reason as to why I kept getting bootloops.
This fixed it.
turdferguson92 said:
THANK YOU SWEET JESUS
I decided to revert to stock and every time I turned my nook off, there was no return. Every time I reflashed, after I nootered I updated everything from the market. I spent 2 hours trying to find the reason as to why I kept getting bootloops.
This fixed it.
Click to expand...
Click to collapse
There is a fix to allow updated flash, can't remember which thread but after going through it I have updated to flash v11 without issue. I also got the (latest) market working by going into titanium backup and doing a data wipe of the market app.
Well, I followed all the given instructions, even bobzdar's method after reflashing for the 5th time. I still cannot get full market access. Even amazon market cuts me off. I've come to the conclusion that my only solution will be to move on to cm7. Honestly though, I prefer the stock rom over cm7.
All I want is cut the rope, and boat browser. Is that too much to ask for? lol
turdferguson92 said:
Well, I followed all the given instructions, even bobzdar's method after reflashing for the 5th time. I still cannot get full market access. Even amazon market cuts me off. I've come to the conclusion that my only solution will be to move on to cm7. Honestly though, I prefer the stock rom over cm7.
All I want is cut the rope, and boat browser. Is that too much to ask for? lol
Click to expand...
Click to collapse
For whatever reason, the market took a while to load the first time, but now it works whenever I go into it. Try opening it up and doing a search for something and see what happens. I did a search for flash after running the flash fix to go right to the updated v11 and it took 30 seconds to a minute for the search to go through, but once it did the market has worked normally since. It was odd, but what kicked the whole thing off was doing the data wipe in titanium backup and all of a sudden it auto updated flash and a few other things (indicating market was working), which necessitated doing the flash fix through CWM etc. Now everything is working properly, hopefully it's just working slowly like it was for me and you just have to kind of kick start it by doing a search.
Thanks for the detailed steps, and to bobzdar for his tips. I too was having the "Nook Col" problem even after having done the flash trick, so I started all over and all is working...
EXCEPT, now I can't download my B&N books. I get this error: "Unable to Download: Internal error: Exception executing the command".
I did update superuser among other things, not sure if that made any difference. It won't let me install the Nook app thru the Market, either.
Any suggestions? I'd like to read my books and would prefer NOT to do this all over again LOL.
zogg44 said:
Thanks for the detailed steps, and to bobzdar for his tips. I too was having the "Nook Col" problem even after having done the flash trick, so I started all over and all is working...
EXCEPT, now I can't download my B&N books. I get this error: "Unable to Download: Internal error: Exception executing the command".
I did update superuser among other things, not sure if that made any difference. It won't let me install the Nook app thru the Market, either.
Any suggestions? I'd like to read my books and would prefer NOT to do this all over again LOL.
Click to expand...
Click to collapse
New book or one already in your library? I just downloaded a book from my library without issue but I don't know if I've tried to download a new book since getting the market working again.
bobzdar said:
For whatever reason, the market took a while to load the first time, but now it works whenever I go into it. Try opening it up and doing a search for something and see what happens. I did a search for flash after running the flash fix to go right to the updated v11 and it took 30 seconds to a minute for the search to go through, but once it did the market has worked normally since. It was odd, but what kicked the whole thing off was doing the data wipe in titanium backup and all of a sudden it auto updated flash and a few other things (indicating market was working), which necessitated doing the flash fix through CWM etc. Now everything is working properly, hopefully it's just working slowly like it was for me and you just have to kind of kick start it by doing a search.
Click to expand...
Click to collapse
Well, evry time I did those steps, the market homepage/top apps or whatever seemed to show up blank, saying "No items found" or something like that.
I just decided to go back to 1.2. I like the new market better anyway.
bobzdar said:
New book or one already in your library? I just downloaded a book from my library without issue but I don't know if I've tried to download a new book since getting the market working again.
Click to expand...
Click to collapse
Already in the library. I have about 12 and can't dl any of them. Haven't tried to buy a new book yet, but I doubt that will work either.
It's frustrating because I was w/o the Nook for several days, did all this stuff and it works well other than this and limited market apps which I can live with.
I may have to go thru the whole process again and make sure I dl everything before I apply the hacks.