So I rooted my Nook with autonooter 3.0.0, I followed all the directions entirely. It worked perfectly, I liked it but wanted to try other stuff. Then I successfully installed Honeycomb v4 on my Nook, I tried it out, but didn't like it, I'll wait until later as its more developed. Then I installed CM7 on my Nook. Its nice, but for some reason a lot of my important apps force close on me. So I thought would just return to stock and then go to autonooter. I tried the method found here - http://forum.xda-developers.com/showthread.php?t=914690
So I don't know if it matters, but I remember formatting boot, system, and data in CWR during the installations of Honeycomb, and also formatting the system and data in CM7 and also in trying to return to stock. So in each of the installations I followed all of the directions perfectly.
Ok, so here is my problem. After I try to return to stock, I try to boot up my Nook, it goes to the Touch the Future of Reading screen, then to the screen with the 'n' on it and the adobe message at the bottom comes up. However, it will not go passed this. It hangs and I cannot fix it. I have tried the 8 reboots which does reinstall the original firmware, however when its complete and reboots it does not boot, it does the same thing I just described.
Please help, if I have left out any information just ask and I will fill in the details.
There is a recovery zip on the development forum. Boot into cwr and flash... that should do the trick... hopefully.
Sent from my DROID2 using XDA App
ext3 / ext4
Doesnt he need to format the partions with a ext3 cwr before flashing or will the recovery do that?
vtx67 said:
Doesnt he need to format the partions with a ext3 cwr before flashing or will the recovery do that?
Click to expand...
Click to collapse
Yeah, I'm beginning to think I do have to fix up the partitions because everything I do is just giving me more hang.
Can anyone help with that?
Get CWR 3.0.5...
Write the SD card image to your uSD...
Copy repartition-boot-with-stock.zip to the root of the SD card...
Decide if you want to restore to 1.0.0 or 1.0.1 and copy the appropriate nook-complete-restore-1.0.x.zip to root of the SD card....
Boot off the SD card in your NC
since you say you have formatted boot... shouldn't ever need to do that btw...
Format Boot... System... Data... and cache...
Install the repartition boot zip file... then the complete system restore from SD card.
yeah.. once you reformat with CWR 3.0.0.5 you should be able to do the re-partition boot flash and then restore the image.
I just got back that way as well.
DizzyDen said:
Get CWR 3.0.5...
Write the SD card image to your uSD...
Copy repartition-boot-with-stock.zip to the root of the SD card...
Decide if you want to restore to 1.0.0 or 1.0.1 and copy the appropriate nook-complete-restore-1.0.x.zip to root of the SD card....
Boot off the SD card in your NC
since you say you have formatted boot... shouldn't ever need to do that btw...
Format Boot... System... Data... and cache...
Install the repartition boot zip file... then the complete system restore from SD card.
Click to expand...
Click to collapse
Thanks for all the help! I'm going to try this now. And I'm guessing it is, but will it be ok to use CWR 3.0.0.6 and boot with that from the SD card?
It needs to be CWR 3.0.0.5 in my experience.
3.0.0.6 supports EXT4 partitions and won't format them back to EXT3.. as long as they are EXT4, the nook will not boot into the stock rom.
The stock kernel doesn't support EXT4.. so it hangs just before it loads the system files..
If you wipe the partitions using 3.0.0.5 and install the full recovery image for 1.01 you should be a-ok.
Alright I got it! You guys are the best! Thanks for the help! Now I just need to re-root and I'm good to go! Thanks again!
Oh and yeah I used 3.0.0.5, that may have been the problem all along because I kept trying to fix with 3.0.0.6. Thanks!
Sorry -- this is probably a silly question but I can't find the answer anywhere.
I need to do a full factory reset. When I do the 8 boot failure option, however, on the 9th boot it goes into clockwork recovery -- where I do a delete user data and factory reset (from the Clockwork menu). Once I reboot (and have to register again to get past the B&N process) I'm still rooted -- or at least I still have Superuser on the Extras menu.
I'm thinking I somehow need to get past Clockwork to do a true reset????
I'm also trying to do this, and having the same problems.
I used adb to set the 8 boot failure and got the boot failure screen as well. I followed the method from the 'restore to stock' thread (which you probably should have posted in, instead of making a new thread) and used the hardware buttons to wipe the rest. I also had some apps left like SU left over. Also I was on 1.0.1 which I manually put on (when I had a booting loop into clockwork (my own fault)). My NC came with 1.1.0, so the restore to stock didn't bring me back to what I bought the nook as.
That 9th boot attempt is supposed to re-image the system partition... having CWR installed on the internal memory must be interfering with that process..
If you want to go back to stock without root files or anything.. try the following -
*NOTE* You must use CWR 3.0.0.5.. 3.0.0.6 will format the partitions as EXT 4, which the stock OS and kernel do not support.
Here are the steps -
1. Download CWR for SD card .7 from this thread - http://forum.xda-developers.com/showthread.php?t=922870 (choose a size appropriate for your sd card)
2. Download Nook Restore 1.01 from this thread - http://forum.xda-developers.com/showthread.php?t=914690
3. Image CWR onto a sd card using WinImage if you're in windows or dd if you're using a mac or linux (In WinImage, you'd go to disk>restore virtual hard drive to physical) give it your sd card reader's drive letter and choose the image you downloaded in step 1)
4. Copy Nook Restore 1.01 from step 2 onto this SD card and eject it from your PC
5. Power off the Nook Color and insert the sd card into the slot
6. Power on the Nook Color and boot into CWR
7. Go to Mounts and Storage
8. Format System and Data
9. Go back to "Install Zip from SD Card on the previous menu by pressing the power button
10. Select "Install Zip from SD Card" and then "Choose Zip from SD Card" * If you get an error, you need to go back to mounts and storage and mount the sdcard*
11. Choose Nook Restore 1.01 and wait for the installation to complete
12. Go back to the main menu and choose wipe cache
13. Power off the Nook Color
14. Remove the SD card
15. Power on the Nook color
The nook should boot into the stock OS and ask you to go through the initial setup process again.
Hope this helps.
Here is my latest attempt to get working again.
I tried about a month go to unbrick and put aside to let my mind get fresh. A month ago DizzyDen sent me all the memory partitions and I "dd" all of them, but could not get the boot menu below to go away.
Nook is using Encore U-Boot Menu by j4mm3r. 1.2 port + extras by fattire.
From an earlier xda nookcolor post with some modifications:
"1a. Download http://www.mediafire.com/?5vbw33ue7pvod0g
1b. Download http://www.mediafire.com/?1zfj4334krqhs48
1c. Extract the .img files from the above, set aside for now."
2. Here I tried verygreen 1.3 sdcard with latest CM7, internal CWM recovery and SDcard CWM recovery. I used the latest CWM recovery. On the SDcard CWM recovery I used both the latest and the one for the original nook ROM, which mine is.
"3. Install ADB. From what I read there is limited success in installing it in 64-bit Windows. It didn't work for me. This may be the most difficult step." I got it to work on my 64-bit machine.
"4. If you can see the /sdcard partition on the Froyo SD copy the two .img files there.
4a. Insert the Froyo SD Card into the Nook and boot. When it's ready start ADB and verify that it can communicate with the Nookie. (Type "ADB devices" in DOS window)" Here I tried CM7 SDcard, CWM Recovery SDcard and internal and CWM Recovery. CWM Recovery
"4b. If the .img files are on the sdcard already, go to step 5.
4c. Type "ADB push (path)/boot.img /sdcard/boot.img" without quotes and with appropriate source path. Wait until it's done.
4d. Type "ADB push (path)/system.img /sdcard/system.img" without quotes and with appropriate source path. Wait until it's done." Here I copied with windows 7 and tried the adb push commands as well. In either situation I was able to get the boot and system image successfully copied over.
"5. Type "ADB shell" without the quotes.
5a. Type "dd if=/sdcard/boot.img of=/dev/block/mmcblk0p1" without quotes. Wait until finished.
5b. Type "dd if=/sdcard/system.img of=/dev/block/mmcblk0p5" without quotes. Wait until finished." It completed successfully.
"6. Once done, turn off Nook and remove SD Card. Save it for another rainy day or put it back into circulation. I saved mine. Cheap insurance for $15.
7. Follow procedure at http://nookdevs.com/Flash_back_to_clean_stock_ROM to restore firmware and reset data." Never able to get here since my boot menu came back up.
Any suggestion as to what I should do next?
1. Don't know what you are trying to do.
2. Don't know what problem you hit.
3. Don't know what your current system is.
Can't help, m8.
I have screwed up my nook to the point that when you turn it on the screen would just be all black, nothing would come up on the screen, and I was able to get back to a fully working system in no time. I would say that it is 99.9% impossible to brick it without really trying too.
Your post is a little hard to understand, so let me see if I have this right,
- You were running a modified version of the stock 1.2 firmware
- You were also using the modified boot menu created by j4mm3r from HERE
- The rest is all a little fuzzy
- You are now trying to return to stock, but can’t because you can’t remove the modified boot menu
If this is somewhat correct, then this should be able to help you.
- Download the stock 1.2 update.zip found HERE, get the “update-nc-stock-1.2-signed.zip” file
- Now download the file to make a bootable CWM card found HERE
- Follow the directions in that post to make your bootable CWM card, then place the “update-nc-stock-1.2-signed.zip” file onto that card
- With your NC off, put the bootable CWM card into your NC, and turn it on
- When CWM starts up, select “wipe cache partition,” followed by “wipe cache partition”
- Now scroll down to and select “mounts and storage”
- Now scroll down to and select “format /boot”
- When that has completed, you will then select “install zip from sdcard”
- Then select “choose zip from sdcard,” and select the “update-nc-stock-1.2-signed.zip” file
- When that has completed, remove the card, and select reboot the device
Your device should now boot just like stock. You can then follow the steps outlined in your step 7 procedure, just follow part one method one, and then part two. At this point you should be back to a completely stock NC.
@GMPOWER
I have the update-nc-stock-1.3.zip on my SDcard ClockworkMod Recovery v3.0.2.8. I have the original nookcolor.
I used my SDcard CWM v3.0.2.8 disk with the update-nc-stock-1.3.zip and followed your instructions.
- With your NC off, put the bootable CWM card into your NC, and turn it on
- When CWM starts up, select “wipe cache partition,” followed by “wipe cache partition”
- Now scroll down to and select “mounts and storage”
- Now scroll down to and select “format /boot”
- When that has completed, you will then select “install zip from sdcard”
- Then select “choose zip from sdcard,” and select the “update-nc-stock-1.3.zip” file
- When that has completed, remove the card, and select reboot the device
My nookcolor rebooted back to green Cyanogen bootup screen followed by the Cyanogen mod skater. Then I get force closes with dspmanager. It is running Mod version 7-08192011-NIGHTLYencore. It did not boot back to stock.
@votinh
What I was trying to do was install update-cm-7.1.0-encore-signed.zip over the last nightly 8-19-2011 that installed correctly. Note: when I attempt from Mounts and Storage to -format /system it hangs and and I have to force restart the nookcolor.
If I attempt to install without format/system the update-cm-7.1.0-encore-signed.zip from the CWM Recovery SDcard v3.0.2.8, it finds, opens, installs, saying Install from sdcard complete. Rebooting and looking at system about says it is still nightly 8-19-2011.
That is why I have tried everything I can to restore the emmc to stock. Everything I tried failed.
I've messed my nook up a couple of time tonight . Have you tried downloading the twrp 2.0 SD card image from here and burning it to a SD card? That will get you a bootable sd card assuming your sd slot isn't broken. Then download the 1.01 Restore from here. Copy that to the bootable sd card and put it in your nook. Power up and you should be in TWRP 2.0 (touchscreen). Wipe system and do a factory reset. After that, flash the nook-complete-restore-1.0.1.zip and reboot to system (after removing sd card). It completely restored me to a stock version, including /boot, etc. One time I did it, I had to hold down the N and power button and do a factory reset for it to boot into the B&N nook ROM.
You could use the clockworkmod bootable sd image as well.
lschroeder said:
@GMPOWER
I have the update-nc-stock-1.3.zip on my SDcard ClockworkMod Recovery v3.0.2.8. I have the original nookcolor.
I used my SDcard CWM v3.0.2.8 disk with the update-nc-stock-1.3.zip and followed your instructions.
- With your NC off, put the bootable CWM card into your NC, and turn it on
- When CWM starts up, select “wipe cache partition,” followed by “wipe cache partition”
- Now scroll down to and select “mounts and storage”
- Now scroll down to and select “format /boot”
- When that has completed, you will then select “install zip from sdcard”
- Then select “choose zip from sdcard,” and select the “update-nc-stock-1.3.zip” file
- When that has completed, remove the card, and select reboot the device
My nookcolor rebooted back to green Cyanogen bootup screen followed by the Cyanogen mod skater. Then I get force closes with dspmanager. It is running Mod version 7-08192011-NIGHTLYencore. It did not boot back to stock.
@votinh
What I was trying to do was install update-cm-7.1.0-encore-signed.zip over the last nightly 8-19-2011 that installed correctly. Note: when I attempt from Mounts and Storage to -format /system it hangs and and I have to force restart the nookcolor.
If I attempt to install without format/system the update-cm-7.1.0-encore-signed.zip from the CWM Recovery SDcard v3.0.2.8, it finds, opens, installs, saying Install from sdcard complete. Rebooting and looking at system about says it is still nightly 8-19-2011.
That is why I have tried everything I can to restore the emmc to stock. Everything I tried failed.
Click to expand...
Click to collapse
You are not using the latest Clockwork. Try the newest version here: http://forum.xda-developers.com/showthread.php?t=971197
Sent from space
mwalt2 said:
I've messed my nook up a couple of time tonight . Have you tried downloading the twrp 2.0 SD card image from here and burning it to a SD card? That will get you a bootable sd card assuming your sd slot isn't broken. Then download the 1.01 Restore from here. Copy that to the bootable sd card and put it in your nook. Power up and you should be in TWRP 2.0 (touchscreen). Wipe system and do a factory reset. After that, flash the nook-complete-restore-1.0.1.zip and reboot to system (after removing sd card). It completely restored me to a stock version, including /boot, etc. One time I did it, I had to hold down the N and power button and do a factory reset for it to boot into the B&N nook ROM.
You could use the clockworkmod bootable sd image as well.
Click to expand...
Click to collapse
Tried using clockworkmod bootable sd image. It gave me Error formatting /data! and Formatting /system... hangs.
koopakid08 said:
You are not using the latest Clockwork. Try the newest version here: http://forum.xda-developers.com/showthread.php?t=971197
Sent from space
Click to expand...
Click to collapse
I have tried with v3.2.0.1 emmc and v3.2.0.1 from SDcard as well. Both fail in exact same way as earlier version.
lschroeder said:
Tried using clockworkmod bootable sd image. It gave me Error formatting /data! and Formatting /system... hangs.
Click to expand...
Click to collapse
Did you try TWRP 2.0? If it also gives an error, maybe you have a hardware problem.
I think the problem is that you're trying to flash a B&N update, when what's on your device is fubar and/or not a B&N rom.
Try flashing a complete B&N restore, instead. There's a link to a complete 1.0.1 restore in this post. (There's also a complete 1.2 restore floating around, but darned if I can find a link to it just now.)
akaCat said:
I think the problem is that you're trying to flash a B&N update, when what's on your device is fubar and/or not a B&N rom.
Try flashing a complete B&N restore, instead. There's a link to a complete 1.0.1 restore in this post. (There's also a complete 1.2 restore floating around, but darned if I can find a link to it just now.)
Click to expand...
Click to collapse
I tried both nook-complete-restore-1.0.1.zip and nook-complete-restore-1.3.zip.
Restore-1.01.zip gives me when I try to complete the instructions it generates
Formatting /data...
Error formatting/data!
Formatting /system...
hangs
Restore-1.3.zip has no additional instruction
Both upon rebooting load the last nightly I was able to install, CyanogenMod-7-08182011-NIGHTLY-encore.
mwalt2 said:
Did you try TWRP 2.0? If it also gives an error, maybe you have a hardware problem.
Click to expand...
Click to collapse
Just tried TWRP 2.0 from a modified CWM Recovery card, latest verstion.
nook-complete-restore-1.0.1.zip gives me
E:Error in /tmp/sideload/package.zip
E:Can't open /cache/recovery/log
E:Cannot load volume /misc!
Got same errors when I tried to install nook-complete-restore-1.3.zip
Install /sdcard/update-cm-7.1.0-encore-signed.zip stops at
Installing update... doe not actually install when I reboot. Returns to August Nightly I previously installed in emmc.
Must have hardware problem. Anyway to zero out nookcolor so I can return for repair since I can not reset to stock.
As others have said it is virtually impossible to fully brick a Nook and hardware failures are less likely than problems with your procedures.
How are you creating your SD boot card? The method used can determine whether you get a real usable boot SD card. For example, it is most important that you use a real USB card adapter. Do not use a memory card reader slot on a PC or laptop. Do not use a Nook or other phone via USB as a card adapter. For best results use a Sandisk card. Use Win32DiskImager to create the card.
If you do that then I'd suggest you start with the VeryGreen CM7 install method onto the same SD card to prove that all is working independently of the emmc.
If you get to that point then you should be good to proceed to either a return to stock or an emmc CM7 install.
Of course it is possible your hardware is screwed (e.g. emmc not working anymore), but it sounds like you should try a few more things first.
I nearly did this. Follow these instructions:
Step 1) Download and boot and use the contents of repartition-boot-with-stock.zip with an SD Card.
Step 2) Take out SD Card.
Step 3) Manual Restore (Rom flash back)
Step 4) Factory Reset - Scroll down to Part Two on the above page.
Doing this in order is very important.
When you're done you should be greeted by the first-time boot tutorial video and this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bobtidey said:
As others have said it is virtually impossible to fully brick a Nook and hardware failures are less likely than problems with your procedures.
How are you creating your SD boot card? The method used can determine whether you get a real usable boot SD card. For example, it is most important that you use a real USB card adapter. Do not use a memory card reader slot on a PC or laptop. Do not use a Nook or other phone via USB as a card adapter. For best results use a Sandisk card. Use Win32DiskImager to create the card.
If you do that then I'd suggest you start with the VeryGreen CM7 install method onto the same SD card to prove that all is working independently of the emmc.
If you get to that point then you should be good to proceed to either a return to stock or an emmc CM7 install.
Of course it is possible your hardware is screwed (e.g. emmc not working anymore), but it sounds like you should try a few more things first.
Click to expand...
Click to collapse
Using a real USB card adapter, using Sandisk card class 4, using Win32DiskImager to create the cards. Using VeryGreen CM7 with CyanogenMod-7.2.0-RC0-encore-KANG (added prefix update-) and have in the past used update-cm-7.1.0-encore-signed.zip with VeryGreen CM7. All is working independently of the emmc.
Been to this point many a time, return to stock does not work, nor does CM7 install to emmc when booting from latest CWM Recovery on a SDcard. The new TWRP 2.0 from external SDcard does not work either. This is why I am concluding that my emmc has a hardware failure, stuck with my August nightly of CM7 so I can not return.
Any suggestions on how to completely trash the emmc so that I can return it before my 1-year warranty runs out. Everything I do including dd command to the boot and system partitions leave the emmc running the August nightly, usually with force closes when it starts.
trancerobot said:
I nearly did this. Follow these instructions:
Step 1) Download and boot and use the contents of repartition-boot-with-stock.zip with an SD Card.
Step 2) Take out SD Card.
Step 3) Manual Restore (Rom flash back)
Step 4) Factory Reset - Scroll down to Part Two on the above page.
Doing this in order is very important.
When you're done you should be greeted by the first-time boot tutorial video and this message:
Click to expand...
Click to collapse
I did everything in the order that you said. repartition-boot-with-stock.zip from an SDcard said that it completed successfully for 1.0.1. Went to Part Two. Powered off and rebooted, was greeted with green cyganmod label followed by U-boot Mem with 1.2 port extras by fattite boot loader.
Looks to me like my only options are to run from SDcard or somehow trash emmc so that nothing loads including cyganmod's boot loader so I can claim emmc memory failed and return for warranty replacement.
Any thoughts on how to trash the cyganmod's boot loader and my August nightly installed in the emmc? All attempts to restore to various stock OS's seemed to fail at trashing the green boot loader and August nightly installed in emmc.
Maybe your partitions on the emmc are so screwed up that the previous techniques aren't working.
Check out post #166 in
http://forum.xda-developers.com/showthread.php?t=949699&page=17
That shows what the partition table should look like and also how to manually put it right.
I had some huge problem with my Nexus One and I wanted to start over completely, so I stupidly went to CWM recovery and hit format boot, cache, data, sdcard, system, and sd-ext. For some reason I didn't realize this would make my phone unusable and make it have no OS. So now when I turn on the phone it goes straight to the fastboot menu, so I can only access the fastboot, bootloader, and CWM recovery.
I've tried formatting my microSD card and putting a stock PASSIMG.zip file (located at http://forum.xda-developers.com/showthread.php?t=1312540) on my microSD card but the bootloader doesn't detect the PASSIMG.zip file.
Can anyone give any guidance on what I can do now?
Thanks
FIXED. This seems to happen to me so often-- things suddenly working after I already make a thread about my problems. But I discovered that the microSD card was corrupt so that's why it never actually had the PASSIMG.zip file on it. Everything is back to normal, and I restored factory settings :good:
I wanted to update my sister's Nook HD+ to CM11. I don't have an SD card big enough to do a nandroid backup, so I tried to back up to the internal SD card. It was working fine, then it said "backup of /data failed". I thought this was because the internal SD card ran out of space. When I tried to reboot, it found that it's stuck in a bootloop. It goes to the nook screen, then the Cyanoboot screen, then starts loading Cyanogenmod like normal. The boot animation plays then freezes, and the device reboots. I've tried clearing the cache and dalvik cache and it gets a little farther, but it's still in a bootloop. Please help! I would like to avoid doing a factory reset if at all possible.
If internal space was maxed out, would a factory reset even work any better?
If only booting is corrupted, you should just be able to simply dirty flash the same rom build or newer to fix without losing anything.
I don't know where nandroid backups are made internally but if they are accessible via usb on a pc, then you could just delete those files. If it is indeed full storage. And then dirty flash the build again if needed.
There's probably some other ways to go as well.