Ok, so I have Froyo on my Captivate from a looong time ago, but now I want to put in Andromeda 2.0. I followed the directions but then it says i have to get back to stock firmware. I got my Captivate on October 25, so it had the JH7, so now I need to get back to that firmware. Anything before that would brick my phone, so I'm trying to find an Odin restore that will get me back to JH7. And yes, I have googled it up a lot. Could you tell me or post a link, where I might find it?
drakizard said:
Ok, so I have Froyo on my Captivate from a looong time ago, but now I want to put in Andromeda 2.0. I followed the directions but then it says i have to get back to stock firmware. I got my Captivate on October 25, so it had the JH7, so now I need to get back to that firmware. Anything before that would brick my phone, so I'm trying to find an Odin restore that will get me back to JH7. And yes, I have googled it up a lot. Could you tell me or post a link, where I might find it?
Click to expand...
Click to collapse
1) Wrong section
2) You really do not need to go back to stock, that is just a disclaimer used. If you understand you have the possibility of bricking your phone than just flash the ROM. I will help you search but if you search the Dev forum rather than google you will find the thread for JH7 Odin. The only time you really need to go back to stock is with a bad flash, which sometimes can be fixed by flashing the ROM a second time.
Ok thanks, sorry for the wrong thread I'm just about to do the Andromeda 2.0 now.
Also, so it doesn't matter that I have the leaked 2.2 firmware, I can still download it with that rather than the 2.1?
yes you can flashhhhhhhhhhhhh if you don't make your phone into a paperweight
I got a replacement 1010 with jh7 installed and had no issues using the odin ji6 one click restore on it.
Sent from my GT-I9000 using XDA App
Moved to Q&A as not android development
Write lets get since information in here...
No technically you do not need to go back to stock but it is always a good idea. No matter what phone model or what stock it came with going back to jh6 is the best bet. It is the tried and true method and better then jh7.so just use the normal common odin
Sent from my SAMSUNG-SGH-I897 using XDA App
You could just flash over but the thing you would have to get past is 3e recovery there is a fix for that. I think there was a time when all new roms in xda were based on official 2.2 software back in october and november of last year and it had 3e, and the easiest way to get past it was to flash stock first. also there are two versions of odin you should try to get familiar with and a recently updated wiki sorta thread should be useful for up to date info. Hope this helps.
Sent from my SGH-I897 using XDA App
Related
I am newbie to Android. So, please bear with my questions below. I used to own an iphone before, and when you reloaded the OS that you get from Apple you know it is the original.With Android it is little different.
I rooted my captivate and now I need to return it to AT&T. Need to load the original ROM.
I did download Odin 1 Click for android 2.1 AT&T Stock ROM? How do I know that it is the actual ROM AT&T/Samsung had put on the Captivate?
There are so many ROMS everybody is putting it out there...just wanted to be sure. I know AT&T or Samsung just don't give out the ROM.
If I have posted this in the wrong forum, please let me know.
Thanks
There is a question and answer section for these posts and it is the stock rom, that's what the thread says. Just read how to use and watch the videos if you're having trouble.
If it says stock it *should* be stock. And since it's Odin one click to stock you should be safe.
Sent from my Captivate
Look up your build number. If 1010 our higher jf6 iud not such and I would avoid odin one click
Is under battery
It is 1008.
But how do you get the Android 2.1 Stock ROM ?? AT&T or Samsung don't give it out. Am I missing something here.
As I said earlier for iphone you could the get ios file from Apple.
Odin injects the stock rom back into your phone
you need to be in down load mode
Open odin
Pull bat, sim, and ext sd
Put bat back in
Hold volume up and down
While holding plug usb
Should have android with shovel on screen.
A box in odin should turn yellow
Click start, watch the magic
Correct odin. Stock for the captivate is jf6
http://www.fileserve.com/file/emnCn2j
But how do you get the Android 2.1 Stock ROM ?? AT&T or Samsung don't give it out.
I am asking once again the same question as nobody is really answering to the question.Sorry about that.
Android is open source. All official software releases are out there.
What are you looking to do, you are not being clear
All I wanted to make sure is that I get the CORRECT ROM to put it back on my Captivate before I return it to AT&T.
Thanks
hmm so when you are told that the odin one click program flashes jf6 stock software (includes all at&t bloat ware) you continue to ask the same question. Good luck
I believe the stock 2.1 rom is embedded inside Odin so when you flash it returns to stock. There is no need to search for the stock 2.1 rom.
please correct me if Im wrong...I'm learning too..
Read the odin thread. Please if you have questions, post in q&a.
climo said:
I believe the stock 2.1 rom is embedded inside Odin so when you flash it returns to stock. There is no need to search for the stock 2.1 rom.
please correct me if Im wrong...I'm learning too..
Click to expand...
Click to collapse
This is correct. I HIGHLY advise you to search for Connexions "how to" videos. It shows you how to use odin to return to stock. So easy, a caveman could do it.
Look here:http://forum.xda-developers.com/showthread.php?t=731989
However, I have to ask the OP this: you mentioned that you rooted your phone, but did you flash to a different ROM? If you didn't flash to a different ROM, all you have to do is to unroot your phone and you're set to go.
LOL I think what the OP is trying to ask is this:
How do we know that Odin is using the correct, stock ROM directly from Samsung/ATT, so that when he flashes the phone with Odin and sends it back to AT&T, they don't tell him hes got the wrong software on it and void the warranty.
Unknownghost00 said:
LOL I think what the OP is trying to ask is this:
How do we know that Odin is using the correct, stock ROM directly from Samsung/ATT, so that when he flashes the phone with Odin and sends it back to AT&T, they don't tell him hes got the wrong software on it and void the warranty.
Click to expand...
Click to collapse
3 minutes of searching would have answered all his questions though.
cdi_h said:
But how do you get the Android 2.1 Stock ROM ?? AT&T or Samsung don't give it out.
I am asking once again the same question as nobody is really answering to the question.Sorry about that.
Click to expand...
Click to collapse
I'm so happy that you found it necessary to flame the thread for an answer.
Relax man.
It's natural to be concerned about voiding the warranty. Nobody wants to shell out $$ for a new phone, right? The bottom line is this, numerous people on this forum have done far worse than rooting their phone and have returned it successfully for a replacement (like bricking it). So take a deep breath, and follow some of the good advice given already to either:
A) unroot your phone (look around you'll find how)
B) flash the stock ROM that's out there in numerous locations
then send the sucker back.
But a bit of logic will show that the 3 minutes gave you the WRONG answer.
IF the Odin program had the stock rom we would not have had issues like loss of 3 button recovery on some phones after using Odin. We also would not have 2 versions of Odin. (1 specifically to address the 3 button recovery issue). You also would still be able to perform an OTA update after using Odin, which once again, most if not all the Odin flashed phones are incapable of.
Odin MIGHT have A stock Rom, in which case Samsung/ATT are using more than one, but it does not have THE stock ROM.
Now if the concern is just to get it close enough to return the phone, the guys at the exchange desk don't know enough about the phone to tell the difference.
axis01 said:
3 minutes of searching would have answered all his questions though.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I897 using XDA App
Hi,
I was playing with ROM flashing and the like and I decided to go back to stock, so I did using the ODIN flash to JF6. However, it seems that I have trouble getting the JF7 update over the air to work. Any ideas?
Thanks
I'm a Noob, but you might try Kies - It should detect a newer version available and let you update that way. Much more reliable in any case if you ask me.
You can do search flashing to stock JH7 that should help you. If no one else has sent you a link by the time I get to my computer I'll send you a link I think it will be flashing 1010 build or something like that.
Sent from my GT-I9000 using XDA App
I've had more problems with kies than anything else, try the samsung website to update.
I see you was wanting JF7, I don't know what the difference is but this will get you back to stock JH7 Eclair.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
I tried it, it works.
Well I want JH7, but I also want to be able to get the official Froyo when or if it comes out.
Bunkered said:
Well I want JH7, but I also want to be able to get the official Froyo when or if it comes out.
Click to expand...
Click to collapse
Like stated above.... flash using kies mini.... then you'll be ready for official AT&T froyo.
Alright thanks for all your help, Mini Kies did the trick.
Hey guys I hard bricked my captivate and need help evaluating what I did wrong so I can prevent it from happening in the future. I just received the device in the mail (it was a replacement device) and tried to use odin one click JF6 to flash it to eclair. I've done this process 100's of time with my previous captivate but with my new one I saw that it was hanging at sbl.bin and my device turned off. I unplugged the usb, did a battery pull, and used my jig and the phone went into download. PHEW... Thinking that my JF6 odin was corrupt or something I decided to use Odin One click JI6 and the odin hung again but this time I wasn't so lucky. The phone wasn't showing any thing and the jig was infective. The phone hard bricked. My question is how did I brick it and why did it hang when I tried odin one click,. (Odin one click has always worked flawlessly for me in the past). Also are froyo and eclair bootloaders the same? If were to flash JF6 2.1 eclair using odin3 over Rogers Froyo should that work?l (BTW my device is 10.11 build)
edit: I understand that odin one click always has a risk involved because your flashing boot loaders but I just want to distinguish whether it was just an unlucky odin flash or something to do with the build number. Thanks
thats a good question. As far as I know Froyo and Eclair have the same bootloaders, but as far as the Odin problem- im sorry I have no idea.
A lot of people on here have bricked their captivates by using OneClick Odin. What happened was that your replacement captivate came with stock froyo which does not work with OneClickOdin. You were on the right track by going to stock JF6. Not sure why it failed for you but if you would have tried it again I'm betting money it would have successfully flashed. Sorry to hear about your troubles.
duuhdave said:
A lot of people on here have bricked their captivates by using OneClick Odin. What happened was that your replacement captivate came with stock froyo which does not work with OneClickOdin. You were on the right track by going to stock JF6. Not sure why it failed for you but if you would have tried it again I'm betting money it would have successfully flashed. Sorry to hear about your troubles.
Click to expand...
Click to collapse
Lol.. now I'm even more confused. You start out by saying the reason it wont work is because his phone came with stock froyo...then you finish by saying your on the right track, it should have worked. ..wtf??
Sent from my SGH-I897 using XDA Premium App
Coreym said:
Lol.. now I'm even more confused. You start out by saying the reason it wont work is because his phone came with stock froyo...then you finish by saying your on the right track, it should have worked. ..wtf??
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Yes search for other threads about oneclick NOT being cooperative with newer model captivate sthat came with stock froyo. I said he was on the right track because the correct method to go back to stock is JF6. Which can be found in Icezar1's continuum thread which requires odin 1.3, the pda file, etc. If he would have simply tried the JF6 process again it would have completed rather than using 1 click odin and messing up everything. Read the second post of this thread where ZELENDEL says that newer captivates with froyo don't work with oneclick
http://forum.xda-developers.com/showthread.php?t=1093926
duuhdave said:
Yes search for other threads about oneclick NOT being cooperative with newer model captivate sthat came with stock froyo. I said he was on the right track because the correct method to go back to stock is JF6. Which can be found in Icezar1's continuum thread which requires odin 1.3, the pda file, etc. If he would have simply tried the JF6 process again it would have completed rather than using 1 click odin and messing up everything. Read the second post of this thread where ZELENDEL says that newer captivates with froyo don't work with oneclick
http://forum.xda-developers.com/showthread.php?t=1093926
Click to expand...
Click to collapse
First of all JF6 is NOT a "method" of going back to stock. JF6 is stock firmware. And I could be wrong but I thought icezars program gave you
Stock firmware 'JI6'? I'm not next to my computer so I do t really know off the top of my head.
*EDIT* Your right, icezars1 program is JF6 firmware. However it is only given as an alternative. Even states in his OP the only reason why Odin3 Oneclickdownload would not work would be because of an unreliable USB driver. So this is indeed a safer way to get back to stock JF6. Odin3 one click should work too. It's unfortunate that it doesn't "always" work.
Sent from my SGH-I897 using XDA Premium App
Coreym said:
First of all JF6 is NOT a "method" of going back to stock. JF6 is stock firmware. And I could be wrong but I thought icezars program gave you
Stock firmware 'JI6'? I'm not next to my computer so I do t really know off the top of my head.
*EDIT* Your right, icezars1 program is JF6 firmware. However it is only given as an alternative. Even states in his OP the only reason why Odin3 Oneclickdownload would not work would be because of an unreliable USB driver. So this is indeed a safer way to get back to stock JF6. Odin3 one click should work too. It's unfortunate that it doesn't "always" work.
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
I'm sure you understood what I meant when I said JF6. It is certainly a rom and the process mentioned in Icezar's thread is one of the preferred methods of downgrading a newer model captivate that is on stock froyo. Let's hope that we have answered and clarified all questions for the OP.
duuhdave said:
I'm sure you understood what I meant when I said JF6. It is certainly a rom and the process mentioned in Icezar's thread is one of the preferred methods of downgrading a newer model captivate that is on stock froyo. Let's hope that we have answered and clarified all questions for the OP.
Click to expand...
Click to collapse
i actually didn't understand what you meant. You make 2 refrencses to using JF6 as a method. First you said the correct method to go back to stock is "JF6", then you said the JF6 process. Again...both refrences to a single JF6 method, when that is not the case. Both methods used to get back to JF6 stock firmware use Odin. One is a one click program, the other a manual flash using .tar.md5 file.
Duuhdave, if im on stock froyo (im in canada btw, so rogers) and use cezars method of flashing stock firmware through full blown odin, should I be flashing jf6(i897 2.1) or rogers 2.1? I ask this because ussualy they want you to on jf6 before flashing.
Sent from my SAMSUNG-SGH-I897 using XDA App
As far as flashing to stock with Odin 1click from stock Froyo, it has worked fine for me MANY times. Bricking using the odin 1click may be related to build number. I went from a 1007 (with stock 2.1) to a warranty repacement 1008 with froyo stock. I flashed 2.1 without a problem, and have several other times.
Using Odin 3 one-click, and icezar1's stock rom will both take you to I-897 AT&T stock JF6. If you want to return to Rogers stock 2.1 without flashing bootloaders, use TRusselo's Rogers Captivate Stock ROMS no ATT logo!.
Thanks for the help!
Sent from my SAMSUNG-SGH-I897 using XDA App
its the build number that caused it
More than likely it was something about the phone having stock froyo with the 3e recovery. I have never had the issue with any of my 2 captivates 1007's and wife's 1010 build but they came with stock eclair. I know many people have had issues due to the stock froyo with 3e recovery as why there is a modded 3e recovery how to somewhere on this forum. Since he laready had froyo boot loaders it has nothing to do with that, and either was a fubar flash due to 3e recovery, bad USB cable, etc that messed things up.
Sent from My KickAss Captivated CM7 OC'd 1.55Ghz/Undervolted
I just had to warranty my original Cappy because of a power button issue. It came stock with 2.1 Eclair and I never had any issues rooting/flashing/ or otherwise messing with it.
The "new" one I have has 2.2 Stock on it, is there anything different about what I need to do? Will ODIN 1-click bring it back to 2.1 without much hassle?
I looked for over an hour and couldn't find any specific answer.
Thanks for the time,
Bassahaulic
questions go in questions ...
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
This is the Development Section, you should've posted this on the Q&A Section instead.
I just had to replace mine last week, just do as you did on eclair rooting was same as was installing an updated ROM
with only 21 posts I think we can forgive a post in the wrong section
When I upgraded (way back when) to the official Froyo 2.2 through Kies, just to check it out, I could only get it rooted through this...View attachment SuperOneClickv1.6.5-ShortFuse.zip
Or you could just flash a rooted Dev Kernel through Odin.
For2ndtwin said:
When I upgraded (way back when) to the official Froyo 2.2 through Kies, just to check it out, I could only get it rooted through this...View attachment 646699
Or you could just flash a rooted Dev Kernel through Odin.
Click to expand...
Click to collapse
I cant verify this but i did have trouble as well re-rooting it after i did the kies update so i just flashed JF6 with odin one click and then re rooted it and its been fine every since. Im not sure what att did but this KB1 through kies sure made it hard to re root when i did the update and i wasnt impressed by it either(go figure). I hope that helps. I do know that odin one click to JF6 will just about fix everything or if your having trouble rooting with the 2.2 KB1
bassahaulic said:
I just had to warranty my original Cappy because of a power button issue. It came stock with 2.1 Eclair and I never had any issues rooting/flashing/ or otherwise messing with it.
The "new" one I have has 2.2 Stock on it, is there anything different about what I need to do? Will ODIN 1-click bring it back to 2.1 without much hassle?
I looked for over an hour and couldn't find any specific answer.
Thanks for the time,
Bassahaulic
Click to expand...
Click to collapse
Yes everyone it does belong in QA and I am sure it will get moved.
To answer your question about 2.1, becareful and have a read through this thread in relation to my experiences with an 1104 build:
http://forum.xda-developers.com/showthread.php?t=1105776&highlight=1104 downgrading with JF6 was bad juju
---My opinion follows as this is what worked for me -----
I would just flash to 2.3.3:
http://forum.xda-developers.com/showthread.php?t=1127249
Or just the stock AT&T boot loaders from here:
http://forum.xda-developers.com/showthread.php?t=1129821
Then go about loading your desired kernel/rom combinations
I'd first like to apologize if these questions have already been answered. I haven't flashed a rom in nearly a year. When at&t put 2.2 on the market I downloaded it. I absolutely hate it. It's worse than 2.1 by far (with the exception of netflix). I wanted to flash to fasty's rom and noticed the instructions said I needed to be on 2.2. Has the process for flashing changed? Can I still use odin 1 click stock? Are there any stickies or threads that already address this issue?
Sent from my SAMSUNG-SGH-I897 using XDA App
Unless its a gingerbread (2.3.x) rom all you need is cwm and then you can flash it, no matter what version of android you are currently on. If its a gingerbread rom you will need to flash bootloaders with odin first also.
If you have used odin one click before and your phone didn't spaz out (some newer phones do) then it is fine to keep using it to return to stock if desired....