I don't really know why but somehow i can't undervolt my phone and i'm running voodoo advanced 666.2 which supports OC/UV and Darky's rom v 9.2. Been googling around finding no answer
Have you got the apps 'setCPU' and 'Voltage control' ???
azzledazzle said:
Have you got the apps 'setCPU' and 'Voltage control' ???
Click to expand...
Click to collapse
Yes but they don't work have also tried cpu tuner doesn't work either
when you open up voltage control does it say you have an incompatible kernel, head over to XDA to get one ??
azzledazzle said:
when you open up voltage control does it say you have an incompatible kernel, head over to XDA to get one ??
Click to expand...
Click to collapse
no it doesn't it says nothing special but the settings doesn't save
Someone that knows what to do??
Related
im on di11igafs 5.2 newest rom with Firebirds newest kernel flashed. I want to switch to SetrioNs kernel here for some good overclocking. I am unsure which to use and what the difference between his normal and XT versions are. i tried flashing the newest 1.6ghz XT SetrioNs but it freaked out my phone even in recovery menu after 20 seconds it would freeze up after about 20 seconds. Do i need to disable the lagfix in the recovery menu and or something else first? any help would be greatly appreciated . Thanks
Bryan
Your phone is not going to do 1600 no matter how hard you try.
newter55 said:
Your phone is not going to do 1600 no matter how hard you try.
Click to expand...
Click to collapse
/facedesk
Thats not what I asked about nor did I try to set it at 1.6 ghz. The phone wouldnt even boot long enough for me to change the voltage control settings. So I suppose i should rephrase my question so I dont get another answer like this one. I would like to use SetrioNs kernel, im using Firebirds kernel right now. Are there any steps i need to take in order to properly flash setrions kernel so that i dont have the problems I had previously?
newter55 said:
Your phone is not going to do 1600 no matter how hard you try.
Click to expand...
Click to collapse
Party pooper.
I know right? Woot woot.
Ok, sorry man. Honestly I would suggest downloading the Paragon rom and yanking the kernel out of that. It is much more up to date and allows oc.as high as 1.6. I have used that one without issue. Haven't tried setirons in quite a while so I don't know what may be going on.
Easiest way is to just put the rom zip in your sd card then use sgs kernel flashed app and select the rom zip. It will extract the kernel and flash it for you. Might want to disable lagfix first as sometimes problems occur when jumping back and forth between firebird and others.
Use voltage control 3.0 to control that kernel as well.
newter55 said:
Ok, sorry man. Honestly I would suggest downloading the Paragon rom and yanking the kernel out of that. It is much more up to date and allows oc.as high as 1.6. I have used that one without issue. Haven't tried setirons in quite a while so I don't know what may be going on.
Easiest way is to just put the rom zip in your sd card then use sgs kernel flashed app and select the rom zip. It will extract the kernel and flash it for you. Might want to disable lagfix first as sometimes problems occur when jumping back and forth between firebird and others.
Use voltage control 3.0 to control that kernel as well.
Click to expand...
Click to collapse
Ah! Thank You Thats exactly what i was looking for. I only have one question left. If i pull the kernel out of the rom will it be in .tar form? Thanks again
The kernel will be zimage. You can just copy that file straight to your sd card and the kernel flasher app will work with that as well.
Also it would seem that paragon is now using speedmods kernel. would you happen to be able upload the kernel you are using for me?
Give me a few.. have to get off the couch
here you go: http://dl.dropbox.com/u/11343737/zImage
Kernel from ParagonRC4
newter55 said:
Your phone is not going to do 1600 no matter how hard you try.
Click to expand...
Click to collapse
I got my phone OC to 1600 it was awesome...My screen couldn't handle it though. It froze
Stephenxda said:
I got my phone OC to 1600 it was awesome...My screen couldn't handle it though. It froze
Click to expand...
Click to collapse
you are lucky, usually they melt
What are you talking about here. I have my phone oc at 600Mhz and it works just fine. It is very stable and I have no issues with it.
newter55 said:
here you go: http://dl.dropbox.com/u/11343737/zImage
Kernel from ParagonRC4
Click to expand...
Click to collapse
Hey man thanks alot
no problem....sorry the humor in my original post didn't come through
newter55 said:
no problem....sorry the humor in my original post didn't come through
Click to expand...
Click to collapse
Haha not a problem. It just seemed like any post i made today i was getting sarcastic answers XD
Hello, I an using an Samsung galaxy mini plus device and I wonder wich is the best app for cpu control? I am using now setcpu 2.4 but I didn't how can I undevolt my phone. Wich app can do this and what are the best voltage that I can set?
bogdan99999 said:
Hello, I an using an Samsung galaxy mini plus device and I wonder wich is the best app for cpu control? I am using now setcpu 2.4 but I didn't how can I undevolt my phone. Wich app can do this and what are the best voltage that I can set?
Click to expand...
Click to collapse
UV = Kernel Support needed
Aaa, now I understand. Is here a "request section" in wich I can request to make such kernel? I don't find anyone untill now.
bogdan99999 said:
Aaa, now I understand. Is here a "request section" in wich I can request to make such kernel? I don't find anyone untill now.
Click to expand...
Click to collapse
No, no request section for now.
Make the kernel Yourself, cause rare people in here that using a Mini Plus.
Hmm, how? I don't have linux on my machine. Can I edit a kernel already make?
it can be done on your galaxy mini
bogdan99999 said:
Hmm, how? I don't have linux on my machine. Can I edit a kernel already make?
Click to expand...
Click to collapse
Well, if you want get mess with Android, install Linux, recommended Ubuntu / Debian.
Edit, still need Linux trough you can do it in Windows, but you will get kernel problem while installing your kernel.
http://forum.xda-developers.com/showthread.php?t=1814311
Ive made the two partitions and tried flashing but i get a error on flashing
'file_getprop: failed to stat " /tmp/install/hardswap.prop': No such file or directory
E:Error in /External_sd/Hard-Swap-Yank555.lu_flasher-v1.0a.zip
could it be that im using speedy gonzalez kernal and it doesnt have swap support built in?
what am i doing wrong?
Well swapper 2 suffice?
there is no way to use it on this device as we dont have a kernel that has swap built into the kernel
smartguy044 said:
there is no way to use it on this device as we dont have a kernel that has swap built into the kernel
Click to expand...
Click to collapse
Thank you is there any alternative such as swapper that could work?
my phone completely bricked............. I dont know how it wont turn on or anything first day using speedy gonazalez kernel perhaps this can be a warning for anyone who used 4.1 with speedy gonzalez I just bought the phone on craigslist too ... like a week ago worked fine without the speedy kernel I did change the maximum cpu frequency to 1300 if that matters but only on demand.
smartguy044 said:
there is no way to use it on this device as we dont have a kernel that has swap built into the kernel
Click to expand...
Click to collapse
I think you can make a swap on the sdcard? Many that was on gingerbread?
Sent from my SGH-T679 using xda app-developers app
darkphate83 said:
Thank you is there any alternative such as swapper that could work?
my phone completely bricked............. I dont know how it wont turn on or anything first day using speedy gonazalez kernel perhaps this can be a warning for anyone who used 4.1 with speedy gonzalez I just bought the phone on craigslist too ... like a week ago worked fine without the speedy kernel I did change the maximum cpu frequency to 1300 if that matters but only on demand.
Click to expand...
Click to collapse
not the kernel bro me and a lot of other people have been using it at a lot higher frequencies then 1300
smartguy044 said:
not the kernel bro me and a lot of other people have been using it at a lot higher frequencies then 1300
Click to expand...
Click to collapse
I dont know then because I was using the kernal and it was just on the charger and i took a nap woke up wouldnt turn on ever... its just dead I cant think of anything else
darkphate83 said:
I dont know then because I was using the kernal and it was just on the charger and i took a nap woke up wouldnt turn on ever... its just dead I cant think of anything else
Click to expand...
Click to collapse
Battery?
Hi,
so I'm currently running the Lunar-Kernel because I want to have more clockspeed-cteps, lower minimum clockspeed and voltage-controls so that I can undervolt the CPU slightly which saves a lot of battery.
I just realized that it has this stupid Logo2Wake and Logo2Menu-Feature that I don't need and now I want to know how I can disable those or if there is any kernel that supports those voltage and clockspeed-settings but doesn't have these Logo-Features.
Thanks for your time and help in advance!
Stupid?!
HeavyHDx said:
Hi,
so I'm currently running the Lunar-Kernel because I want to have more clockspeed-cteps, lower minimum clockspeed and voltage-controls so that I can undervolt the CPU slightly which saves a lot of battery.
I just realized that it has this stupid Logo2Wake and Logo2Menu-Feature that I don't need and now I want to know how I can disable those or if there is any kernel that supports those voltage and clockspeed-settings but doesn't have these Logo-Features.
Thanks for your time and help in advance!
Click to expand...
Click to collapse
Ok so because you don't need them, doesn't mean these are stupid features. Devs are working hard to bring those features users asked for. What is stupid imo is someone not searching the forum for something evident. maybe you should read those threads
Not a single kernel there that does what I describe above, except this one:
http://forum.xda-developers.com/showthread.php?t=2301543
But the download isn't available anymore.
HeavyHDx said:
Not a single kernel there that does what I describe above, except this one:
http://forum.xda-developers.com/showthread.php?t=2301543
But the download isn't available anymore.
Click to expand...
Click to collapse
You ca n undervolt and overclock/underclock with elementalx
you can chose what features you want when installing in aroma so you won't be stuck with logo2wake or logo2menu if you don't want them
Yes but it doesn't work with CM11
HeavyHDx said:
Yes but it doesn't work with CM11
Click to expand...
Click to collapse
maybe you should have mentioned this in your op? :laugh:
TeaMSeven kernel for CM11. Why would you not want logo to menu? It is so handy but even if it was there you wouldn't have to ever touch it. Anyway, aroma lets you choose whether to install or not. Btw, my first post after I got my One was asking for a kernel for CM that DID have that feature and I got my a** busted!!
Sent from my GT-p511x
This kernel doesn't have AROMA-Options for all the features :/
I don't need the features and at first I didn't know that they were there, was really confused when the phone randomly woke up or a random menu popped up.
Anyone? :/
HeavyHDx said:
Anyone? :/
Click to expand...
Click to collapse
If you are looking for a kernel that suites your needs maybe you should look into building one yourself.
HeavyHDx said:
This kernel doesn't have AROMA-Options for all the features :/
I don't need the features and at first I didn't know that they were there, was really confused when the phone randomly woke up or a random menu popped up.
Click to expand...
Click to collapse
I installed and selected those options so I'm sure you could unselect them!
Sent from my GT-p511x
Okay I'll try it real quick
Q&A for [KERNEL][AGNi][CM] 06-10-2014 AGNi pureCM v2.8.9 I9300 (ULTRA SMOOTH)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Roms
Hello, with which roms works apart from cm?
Artyom98 said:
Hello, with which roms works apart from cm?
Click to expand...
Click to collapse
all non samsung roms 4.4.x except miui.
psndna88 said:
all non samsung roms 4.4.x except miui.
Click to expand...
Click to collapse
How to tweak?
mjp93 said:
How to tweak?
Click to expand...
Click to collapse
agni control inbuilt autoinstalled..
i didnt find it
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
psndna88 said:
agni control inbuilt autoinstalled..
Click to expand...
Click to collapse
It means kernel didn't installed! Why? i did all things via aroma. Should i retry? Can u fouofure) figure out?
check about device in settings.. will show wat kernel installed.
incase of auto install failure, install two apks present in /res/app by root explorer.
psndna88 said:
check about device in settings.. will show wat kernel installed.
incase of auto install failure, install two apks present in /res/app by root explorer.
Click to expand...
Click to collapse
Umm, kernel got installed , but passing the boot screen device don't boot up. had to reflash the rom. Checked twice but after kernel installation device won't start.
device 9300 , cm 11
mjp93 said:
Umm, kernel got installed , but passing the boot screen device don't boot up. had to reflash the rom. Checked twice but after kernel installation device won't start.
device 9300 , cm 11
Click to expand...
Click to collapse
i hav it working in my device i9300 LS rom.
check for bad download.
psndna88 said:
i hav it working in my device i9300 LS rom.
check for bad download.
Click to expand...
Click to collapse
I downloaded twice differently . So your opinion is a bad download?
mjp93 said:
I downloaded twice differently . So your opinion is a bad download?
Click to expand...
Click to collapse
else, ur using r4p0 kernel variant which is only meant for nameless rom.
psndna88 said:
else, ur using r4p0 kernel variant which is only meant for nameless rom.
Click to expand...
Click to collapse
So where i select that? Guide or links?
mjp93 said:
So where i select that? Guide or links?
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/dl/?id=9258
check the filename ur flashing..
if it has words R4P0 then it will work only for nameless rom.
psndna88 said:
http://forum.xda-developers.com/devdb/project/dl/?id=9258
check the filename ur flashing..
if it has words R4P0 then it will work only for nameless rom.
Click to expand...
Click to collapse
Yes r4p0 was what i had.
but was it in the downloads that it's for unnamed rom?
a last question - 1.6 Ghz clock would be good om daily basis. Any harm to device? what to use?
Thanks.
mjp93 said:
Yes r4p0 was what i had.
but was it in the downloads that it's for unnamed rom?
a last question - 1.6 Ghz clock would be good om daily basis. Any harm to device? what to use?
Thanks.
Click to expand...
Click to collapse
well regular users know abt this
n i had mentioned this in the past
1.6 ghz i never tried
if it is unstable, dont oc
psndna88 said:
well regular users know abt this
n i had mentioned this in the past
1.6 ghz i never tried
if it is unstable, dont oc
Click to expand...
Click to collapse
Well now I love one thing that it does shows India.
And what does oc means?
mjp93 said:
Yes r4p0 was what i had.
but was it in the downloads that it's for unnamed rom?
a last question - 1.6 Ghz clock would be good om daily basis. Any harm to device? what to use?
Thanks.
Click to expand...
Click to collapse
My phone is always set to 1.6ghz with a 30mv undervolt and I haven't experienced any problems / crashes.
ArkThompson said:
My phone is always set to 1.6ghz with a 30mv undervolt and I haven't experienced any problems / crashes.
Click to expand...
Click to collapse
I don't understand undervolt. If i keep it on 1.6 don't know further about under volt. it's okay?
mjp93 said:
I don't understand undervolt. If i keep it on 1.6 don't know further about under volt. it's okay?
Click to expand...
Click to collapse
If you don't undervolt then your phone will get too hot / use too much battery when overclocking (going to 1.6). It's best to test how high you can undervolt your phone before it starts to lag / freeze to find the optimal level of undervolting (e.g. my phone freezes at 40mv because of touchboost). If your phone refuses to boot after overclocking / undervolting then you can flash AGNi_reset_oc-uv_on_boot_failure.zip (found in /sdcard) to fix it.
ArkThompson said:
If you don't undervolt then your phone will get too hot / use too much battery when overclocking (going to 1.6). It's best to test how high you can undervolt your phone before it starts to lag / freeze to find the optimal level of undervolting (e.g. my phone freezes at 40mv because of touchboost). If your phone refuses to boot after overclocking / undervolting then you can flash AGNi_reset_oc-uv_on_boot_failure.zip (found in /sdcard) to fix it.
Click to expand...
Click to collapse
so i did undervolt to - 30 and i dont use touch boost. but i fear about that boot problem.