Database Develop

HELP!!!

Hi Guys.
I was turning on my captivate, and now when I turn it on, it does the AT&T screen, and Galaxy s Screen, and just gets stuck there, and then goes blank.
Help, please,

MantaZumanity said:
Hi Guys.
I was turning on my captivate, and now when I turn it on, it does the AT&T screen, and Galaxy s Screen, and just gets stuck there, and then goes blank.
Help, please,
Click to expand...
Click to collapse
Probably not a development question.
What did you do to make it do that?

I was trying to flash a rom, and it was taking long and not working,
So I stooped it, and tried turning it back on, and now it won't work.

MantaZumanity said:
I was trying to flash a rom, and it was taking long and not working,
So I stooped it, and tried turning it back on, and now it won't work.
Click to expand...
Click to collapse
Use ODIN3 to reflash. And you should post problems in the ROM's thread, not start a new one. And do a lot more reading...

Sounds like a bad flash. Down load the Odin one click JF6 and falsh back to stock. Once the phone boots up, put into USB debugging mode, master clear, root and install CWM. From there just install the ROM you like by following the instructions of the Dev. Hope this helps!

That's the thing, the phone wont boot! It goes to the Galaxy s logo, then goes blank.

MantaZumanity said:
That's the thing, the phone wont boot! It goes to the Galaxy s logo, then goes blank.
Click to expand...
Click to collapse
You don't get the S screen when you enter download mode. Do you even know how to enter recovery mode or download mode?

MantaZumanity said:
Hi Guys.
I was turning on my captivate, and now when I turn it on, it does the AT&T screen, and Galaxy s Screen, and just gets stuck there, and then goes blank.
Help, please,
Click to expand...
Click to collapse
FYI-If a flash is taking a long time it usually means it is installing a LagFix option. Dont ever stop an install before it is complete. This will cause the phone to become inoperable until you Odin back to stock.

So, will you guys show me what to do?
I'm sorry I'm such a noob.

MantaZumanity said:
So, will you guys show me what to do?
I'm sorry I'm such a noob.
Click to expand...
Click to collapse
Have you read anything about how to flash a rom, or how to use ODIN3, or anything else for that matter?

I know how to use Odin3,
I just don't know how to use it now since my phone is is stuck.
Will someone tell me what to do?

MantaZumanity said:
I know how to use Odin3,
I just don't know how to use it now since my phone is is stuck.
Will someone tell me what to do?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731989
Instructions on how to enter download mode and use ODIN3 are in that thread.

kegobeer said:
Use ODIN3 to reflash. And you should post problems in the ROM's thread, not start a new one. And do a lot more reading...
Click to expand...
Click to collapse
Do this
1) GO to http://forum.xda-developers.com/showthread.php?t=731989 . Download I897UCJF6 - Odin3 One-Click Downloader:
http://www.thevod.org/misc/captivate...l-OCD-REV0.rar
2) Shutdown phone. Remove SIM and External SD Card.
3) Run the exe you just downloaded by Right clicking and then selecting "Run as administrator".
4) Put the phone in download mode. See instructions below
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold both Volume buttons (from i9000 just down, don't touch the power button)
Plug in the USB cable and continue holding both Volume buttons
5) Confirm that the phone is indeed in Download mode. You should see Yellow Triangle
6) Click Start
7) Wait for it to complete. You are now back to stock ROM.
Extra: Flashing to stock ROM will disable your ability to go to recovery/download mode using button combo. Please apply 3 button lagfix

MantaZumanity said:
I know how to use Odin3,
I just don't know how to use it now since my phone is is stuck.
Will someone tell me what to do?
Click to expand...
Click to collapse
Put your phone back in the box, take it back to AT&T and get an iphail.
Sent from my SAMSUNG-SGH-I897 using XDA App

cappysw10 said:
Put your phone back in the box, take it back to AT&T and get an iphail.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
LOL! That made my day!

It's flashing back to stock rom, thanks you guys!
I just won't flash a custom rom.

cnewsgrp said:
Extra: Flashing to stock ROM will disable your ability to go to recovery/download mode using button combo. Please apply 3 button lagfix
Click to expand...
Click to collapse
What are you talking about? This is massively incorrect. You only lose your 3 buttons ability to enter recovery or download mode depending on your particular phone. i have always had it working, have flashed back to stock countless times, and have never either lost my 3 buttons ability or needed the "3 button fix".
Look under your battery. There is a # on the sticker, i believe beneath the serial #. It is 100x.
1006=fine, no probs.
1007=iffy, some good and some bad.
1008=3button fix REQUIRED almost every time......

techmik67 said:
What are you talking about? This is massively incorrect. You only lose your 3 buttons ability to enter recovery or download mode depending on your particular phone. i have always had it working, have flashed back to stock countless times, and have never either lost my 3 buttons ability or needed the "3 button fix".
Look under your battery. There is a # on the sticker, i believe beneath the serial #. It is 100x.
1006=fine, no probs.
1007=iffy, some good and some bad.
1008=3button fix REQUIRED almost every time......
Click to expand...
Click to collapse
I have 1008. I lose 3 button combo everytime I flash to stock. Anyway there is no harm in reapplying it so why not recommend it? I don't want the OP to lose the ability.

techmik67 said:
What are you talking about? This is massively incorrect. You only lose your 3 buttons ability to enter recovery or download mode depending on your particular phone. i have always had it working, have flashed back to stock countless times, and have never either lost my 3 buttons ability or needed the "3 button fix".
Click to expand...
Click to collapse
Although you are correct that the one-click doesn't kill the button combos on all phones, it does on most batch 1008 phones and maybe all newer phones. It's a good idea to point people to the flasher that you know won't disable the combos, particularly when the person you are trying to help is pretty clueless about how all this stuff works.

cappysw10 said:
Put your phone back in the box, take it back to AT&T and get an iphail.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
+1. if you cant take on the responsibility of reading and basic comprehension, you deserve an iphone. let steve tell you how to use your phone.

[Q] SS AT&T Captivate stuck on ATT Splash Screen

Hi, I have a SS/ATT Galaxy S. It was working fine. I made the mistake of running an update to change the ATT splash screen. The device boots to the ATT splash screens and stays there. You can hear the SS start up sounds as though the unit booted ok.
I've tried various Odins they all hang on file analysis. I've tried using different computers per the recommendations in the various threads. I've tried many of the one click and also separate file updaters. They all hang on file analysis.
I am able to use Droid explorer to view the device. I've also put a new update.zip on an sd card but nothing seems to change the splash screen.
I'm not sure how to tell what version the unit is currently on.
I can get to the 3 button state. It says Android System recovery <2e>.
I have the options to reboot, reinstall packages, delete all user data and delete cache data. I've tried each of them, no change.
I have tried to read many threads before bothering anyone. Your input would be appreciated.
Thanks

if you have the update.zip on your phone, in the root of your SD card.. then from 2eRecovery, select reinstall packages.. may have to do it twice. That will boot your phone into clockworkmod recovery.. and from there you should be able to mount storage- put a ROM on your device, flash and be good to go.

Reply to thread
Hi, Thanks for the fast response. I've tried update.zip on both an sd card and also via droid explorer, about 5 times. If I reboot, same thing, the ATT splash is there, and the Galaxy boot sound. I can get into recovery and droid explorer works. If I try Odin it hangs on file analysis. Anything else I can try? Thanks again.

Are you in dl mode when you try this, or recovery?

The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.

Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
If you can get to dl mode try using AIO Captivate to flash back to stock 2.1. I've had success as I flashed with the partition checked and had to go all the way back using ODIN contained in the AIO Captivate program. Found here

Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
Yeah if you can get into download mode than you are not bricked. I would Odin or Heim back to JF6 and go from there. What happened when you tried reinstalling packages from 2e? I know you said everytime you reboot- but what did it say when selected reinstall packages?
Sent from my SGH-I897 using XDA Premium App

I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.

Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Great.. glad to hear it
Sent from my SGH-I897 using XDA Premium App

Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Now on to some real ROM flashing!! Glad you got it working. I did almost the same thing and was sweating bullets.

Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...

Delphin9 said:
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Click to expand...
Click to collapse
Of course it is worthed it to move to 2.3 I mean, it comes with so many more features and is running just perfect as a everyday rom. You shouldn't be disapointed
Sent from my Mosaic powered I896 using Tapatalk

But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...

mrhaley30705 said:
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
Click to expand...
Click to collapse
+1.
I had to make a jig when I soft bricked it. Not fun. Since then I purchased one and am glad I did.

Well, that means I won't have wasted my $2.00.
I saw this and thought it worth to try. http://www.youtube.com/watch?v=D0aoabVtPJ8
In your footer, it says you're using mosaic.
e.g. ROM: Mosaic III, ¤Kernel: Xcal's #14, ¤Modem: JK4, ¤Launcher: ADW Ex
Can you point me to the correct files/process? I guess I'm scared of screwing it up again. when I look on the forum there's almost too much info for a noob to choose which is best. Cheers...

galaxy tab sgh-t849 I need professional help

I just got this tab and like every other android i get I rooted it. I used superoneclick -- worked fine. then downloaded cwm and flashed the recovery. of course when i went into recovery it was 3e so i couldnt actually use cwr without the bypass fix. Anyway -- i used some recovery fix -- which i think was for a vibrant -- wasn't thinking. Once it rebooted into recovery it showed some yellow letters then went blank. The computer still recognizes it but the tab won't boot. i can reset it by turning it off and on but it only shows tmobile splash and the yellow letters scrolling in recovery then goes blank again. please help. i've been reading everything but no one seems to have had this problem.
thank you very much

Put it in a blender, jk, send it back to samsung.
Sent from my SGH-T849 using XDA App

atomiq said:
Put it in a blender, jk, send it back to samsung.
Sent from my SGH-T849 using XDA App
Click to expand...
Click to collapse
is that really my best option??
i figured there would be some manual way to reflash the recovery or maybe complete firmware with a recovery built in. it will still go into download mode -- like i said the computer still recognizes it but I just don't know where to start. ive never used odin and not a pro at adb/sdk but i can usually follow directions pretty well. i've rooted g1's, mytouch 3g fenders slides, inspires, atrix, vibrant, captivates so i'm not giving up yet. i know someone is willing to help.

from the off position, when you press and hold volume down then a moment later without letting up from volume down also hold power button until lights turn on, what does it do?

download all below zips, and unzip them
run it usb driver. say yes to everything. plug in tab to computer in download mode. let it install tab drivers
unplug tab.
open odin
Watch the first box on the left. ID:COM
plug in tab to comp in download mode.
That box should light up yellow, that means your tab in connected and ready to go.
place unzipped stock rom in PDA.
Press Start.
When done it should say all threads completed, and your tab should restart on its own.
Let it boot, and welcome back to stock Tmobile
uploads are taking a bit, be patient.
Do you want stock 2.2, or 2.3?

yes -- it goes into download mode
sounds promising -- thank you -- i will keep you updated on the progress.
prefer 2.2 where it was.
thanks so much

REMOVED!!!!!
here is dropbox of everything you need. It is a stock firmware, no root.
once we get you back up and running, we will go from there.
please let me know the moment you have downloaded this zip, as it sucks my bandwidth.

Drop box removed. Avaiable upon request
Sent from my GT-P1000 using XDA Premium App

so? i would like to request the download then...
the files being removed?

gottarootit said:
so? i would like to request the download then...
the files being removed?
Click to expand...
Click to collapse
i will put it up again for an hour. Gimmie a second, gonna add stock tmobile 2.2 also

here ya go, JMK is stock Gingerbread, And the other is 2.2. If you are going to 2.2, you dont need to worry about any of the modems in the zip folders.
just open odin and and place stock tar file
REMOVED!!!!!!

ssserpentine said:
here ya go, JMK is stock Gingerbread, And the other is 2.2. If you are going to 2.2, you dont need to worry about any of the modems in the zip folders.
just open odin and and place stock tar file
REMOVED!!!!!!
Click to expand...
Click to collapse
beautiful --- just flashed with odin and went through with no problems. once back up i re-ran the root and unlock. now i'm gonna wait to flash cwr until i'm good and sure i know what i'm doing. btw -- i flashed a new kernel with recovery before the full restore and that didn't help. i'm not positive but i guess thats how you get clockwork rec to work.?
thanks so much.

can someone help me with the same issue. I am getting no boot on this tablet. I have tried the volume button and power with no luck. Can someone send me a link for the stock sprint restore.

gottarootit said:
beautiful --- just flashed with odin and went through with no problems. once back up i re-ran the root and unlock. now i'm gonna wait to flash cwr until i'm good and sure i know what i'm doing. btw -- i flashed a new kernel with recovery before the full restore and that didn't help. i'm not positive but i guess thats how you get clockwork rec to work.?
thanks so much.
Click to expand...
Click to collapse
Which did you go with? 2.2 or 2.3.3?
Let me know what your tab currently says in settings, about device.
Hold down the back arrow, and while still holding a second later, press you powerbutton. Let go.
Shoulda taken a screen shot. Uoload it here or just write it down.
I can guide you from there.
"42"

mnbgibbs said:
can someone help me with the same issue. I am getting no boot on this tablet. I have tried the volume button and power with no luck. Can someone send me a link for the stock sprint restore.
Click to expand...
Click to collapse
get the samsung usb drivers. Included in keis, but google and download just usb driver if you dont have kies.
Instal.
Plug in tab.
Let drivers instal.
Download and open Odin.
There is.a box on the left below an open window, is it blank? (no yellow color?)
If so, your okay so far. If not and it has a yellow, still good.
Plug in tab to comp.
Did a yellow box appear? Or a second one if ine allready there?

hi, i bricked my t849 by wrong flashing..still can go to download mode.can you upload file again to recover my PDA

sharaz191 said:
hi, i bricked my t849 by wrong flashing..still can go to download mode.can you upload file again to recover my PDA
Click to expand...
Click to collapse
i posted the link for ya there .. check it

after update stuck at galaxy tab logo...any other help sir

ok download stock rom froyo and not Gingerbread

where can i find froyo version?

[Q] Captivate Bricked after Odin One Click

Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.

yakobo said:
Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.
Click to expand...
Click to collapse
You'll have to use the full Odin program and grab a stock ROM from the development section. Once your in download flash stock ROM with through Odin or heimdall. I'm not next to my computer so I don't feel like fishing for links ..but should be fairly easy!
Sent from my SGH-I897 using xda premium

yakobo said:
Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.
Click to expand...
Click to collapse
This is a Odin 1 click for KB1 2.2 stock. After that follow any roms instructions except if it says stock 2.1 ignore it and assume its stock 2.2

I was wondering if I should follow this thread??
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36

Might I ask do you need to get to 2.1?

prbassplayer said:
Might I ask do you need to get to 2.1?
Click to expand...
Click to collapse
When I got my phone (about a two weeks ago) it came with 2.2 already on the phone. I don't need to get to 2.1 but I was thinking I'd go to 2.1 and then upgrade to 2.2 using att? If I can?

But why? If you got it as is and its stock its att's 2.2. At any rate If your so inclined on flashing 2.1 the one you mentioned thats using full Odin with pit should work. I suggest doing it if and only if you have that jig handy. Also keep in mind that .tar probably has bootloaders in it (wich is a risk you really dont need to take) just my 2 cents

prbassplayer said:
This is a Odin 1 click for KB1 2.2 stock. After that follow any roms instructions except if it says stock 2.1 ignore it and assume its stock 2.2
Click to expand...
Click to collapse
Links in that thread seem to be broken:/ So I suppose I can't use that.

Ive never used this one but it is also a KB1 2.2 KB1

My ultimate goal is to get Andromeda3 on my cappy. It seems to be a good rom. Could I just flash that using oden? (put it in the pda slot) or will that not work until I go back to stock?
With this new thread you linked me to, Just put in odin and I should be good to go? Thank you for your help by the way.

Ive never used that rom. Follow their instructions and assume stock is 2.2 for you. Also The original link i sent you should have worked. Aperrantly mediafire.com is having issues tonight.

installing Andromeda3 doesnt require going back to stock, 2.2 or 2.1.
ODIN flash a custom CWM kernel
boot to recovery
flash rom
thats it

Pirateghost said:
installing Andromeda3 doesnt require going back to stock, 2.2 or 2.1.
ODIN flash a custom CWM kernel
boot to recovery
flash rom
thats it
Click to expand...
Click to collapse
I can't because I bricked my cappy. i can't go into recovery right now. I need a jig to get back into download mode to fix it.

prbassplayer said:
Ive never used that rom. Follow their instructions and assume stock is 2.2 for you. Also The original link i sent you should have worked. Aperrantly mediafire.com is having issues tonight.
Click to expand...
Click to collapse
Once I get my jig hopefully mediafire is up and I can download from the first link you sent me. That seems to be my best bet right now. Thank you for your help. I sure hope I can get my phone backXD

yakobo said:
I can't because I bricked my cappy. i can't go into recovery right now. I need a jig to get back into download mode to fix it.
Click to expand...
Click to collapse
you are stuck in a boot loop right?
if you power your phone off, hold down both vol buttons and hold down the power button until the ATT screen comes up, let go, does it not go into recovery mode?
or
download mode:
power off, while holding both vol buttons, plug in usb. does that not work?

yakobo said:
My ultimate goal is to get Andromeda3 on my cappy. It seems to be a good rom. Could I just flash that using oden? (put it in the pda slot) or will that not work until I go back to stock?
With this new thread you linked me to, Just put in odin and I should be good to go? Thank you for your help by the way.
Click to expand...
Click to collapse
Get ursa minor back on your phone, then mount usb in mounts and storage, then copy the Andromeda3 zip to the drive. You were almost there.
Fish around in the usb port with 301kOhms of resistance from radio shack. You will hit pins 4 abd 5 and you will be in download mode.

Pirateghost said:
you are stuck in a boot loop right?
if you power your phone off, hold down both vol buttons and hold down the power button until the ATT screen comes up, let go, does it not go into recovery mode?
or
download mode:
power off, while holding both vol buttons, plug in usb. does that not work?
Click to expand...
Click to collapse
No:/ no button combos work to get me in recovery or download mode. Getting a jig (hopefully today) so I can fix all this. Yes it is in a boot loop

AdamOutler said:
Get ursa minor back on your phone, then mount usb in mounts and storage, then copy the Andromeda3 zip to the drive. You were almost there.
Fish around in the usb port with 301kOhms of resistance from radio shack. You will hit pins 4 abd 5 and you will be in download mode.
Click to expand...
Click to collapse
Thanks. I tried putting the Andromeda on the phone by copying it over to the phone through the mounted sd card but it was all of a sudden "write protected" and showed up as a cd instead of an sd card. :/ I know I was real close but I made some mistakes along the way
also, when you say fish around the usb port. you mean inside the phone? Is there any danger of hitting the wrong pins and possibly hurting my phone? (say i hit pins 3 and 5 by mistake or something) or is it all pretty safe? I was going to try and attempt the jig method that only used the resistors but n oticed the pins were horrible small in the phone:/

yakobo said:
Thanks. I tried putting the Andromeda on the phone by copying it over to the phone through the mounted sd card but it was all of a sudden "write protected" and showed up as a cd instead of an sd card. :/ I know I was real close but I made some mistakes along the way
also, when you say fish around the usb port. you mean inside the phone? Is there any danger of hitting the wrong pins and possibly hurting my phone? (say i hit pins 3 and 5 by mistake or something) or is it all pretty safe? I was going to try and attempt the jig method that only used the resistors but n oticed the pins were horrible small in the phone:/
Click to expand...
Click to collapse
It's not inside the phone... it's the USB port on the phone. One pin is on top and the other is on the bottom. If you don't have a JIG, that's the easy way to do it. There's no power on the USB port. This is a quick way to do it. You'll be fine. It's safe.

AdamOutler said:
It's not inside the phone... it's the USB port on the phone. One pin is on top and the other is on the bottom. If you don't have a JIG, that's the easy way to do it. There's no power on the USB port. This is a quick way to do it. You'll be fine. It's safe.
Click to expand...
Click to collapse
Sorry, that is what I meant. I meant to place where the charger is plugged in to. Just seems like the pins are really really tiny. Thank you for your help gonna get my resistors hopefully today and get my phone working again.

[Q] Captivate hangs in 3e recovery

I’ve got an AT&T Captivate got stuck in a boot loop running CM7. I re-installed éclair to take advantage of 2e recovery. Rooted it, and intended to put a version of UCKB1 without 3e recovery, so I could install unsigned files to prep for a re-install of CM. Apparently I flashed the wrong one, because the phone is now stuck in 3e recovery. It won’t let me use the power button to select reboot, etc. I can’t get it into download mode, even with a jig, or with one-click unbrick. I can’t even use ADB, since it is in recovery. I’ll take any advice with or without included insults. Thanks!

Does the phone immediately go into recovery on boot? If so, try using the soft buttons. depending on which CWM ur on, they may or may not work

flash to stock using an Odin 1 click, or regular Odin using a pit file, you must re-partition the device after coming off of cm 7

dude....drop the double SIG. thats straight up vulgar.

Thanks for the advice. I can't use Odin, because the phone won't get into download mode no matter what I try (see above.) soft buttons don't seem to be working either. Any other thoughts?

Fixed it!
Re-tried with a newly made jig. Must have blown a resister last time. Works now. Thanks for the advice.

Pirateghost said:
dude....drop the double SIG. thats straight up vulgar.
Click to expand...
Click to collapse
"Dude.." blame tapatalk. sorry for answering someone while I'm working...
assuming stupidity from other senior members like yourself is also vulgar! ( you should know better of me )

TRusselo said:
"Dude.." blame tapatalk. sorry for answering someone while I'm working...
Click to expand...
Click to collapse
How is it tapatalk's fault?
YOU had to set it up that way
I use tapatalk like 80% of the time, you don't see with a double sig.

TRusselo said:
"Dude.." blame tapatalk. sorry for answering someone while I'm working...
Click to expand...
Click to collapse
its not tapatalk that set it up