HELP!!! - Captivate Q&A, Help & Troubleshooting

Hi Guys.
I was turning on my captivate, and now when I turn it on, it does the AT&T screen, and Galaxy s Screen, and just gets stuck there, and then goes blank.
Help, please,

MantaZumanity said:
Hi Guys.
I was turning on my captivate, and now when I turn it on, it does the AT&T screen, and Galaxy s Screen, and just gets stuck there, and then goes blank.
Help, please,
Click to expand...
Click to collapse
Probably not a development question.
What did you do to make it do that?

I was trying to flash a rom, and it was taking long and not working,
So I stooped it, and tried turning it back on, and now it won't work.

MantaZumanity said:
I was trying to flash a rom, and it was taking long and not working,
So I stooped it, and tried turning it back on, and now it won't work.
Click to expand...
Click to collapse
Use ODIN3 to reflash. And you should post problems in the ROM's thread, not start a new one. And do a lot more reading...

Sounds like a bad flash. Down load the Odin one click JF6 and falsh back to stock. Once the phone boots up, put into USB debugging mode, master clear, root and install CWM. From there just install the ROM you like by following the instructions of the Dev. Hope this helps!

That's the thing, the phone wont boot! It goes to the Galaxy s logo, then goes blank.

MantaZumanity said:
That's the thing, the phone wont boot! It goes to the Galaxy s logo, then goes blank.
Click to expand...
Click to collapse
You don't get the S screen when you enter download mode. Do you even know how to enter recovery mode or download mode?

MantaZumanity said:
Hi Guys.
I was turning on my captivate, and now when I turn it on, it does the AT&T screen, and Galaxy s Screen, and just gets stuck there, and then goes blank.
Help, please,
Click to expand...
Click to collapse
FYI-If a flash is taking a long time it usually means it is installing a LagFix option. Dont ever stop an install before it is complete. This will cause the phone to become inoperable until you Odin back to stock.

So, will you guys show me what to do?
I'm sorry I'm such a noob.

MantaZumanity said:
So, will you guys show me what to do?
I'm sorry I'm such a noob.
Click to expand...
Click to collapse
Have you read anything about how to flash a rom, or how to use ODIN3, or anything else for that matter?

I know how to use Odin3,
I just don't know how to use it now since my phone is is stuck.
Will someone tell me what to do?

MantaZumanity said:
I know how to use Odin3,
I just don't know how to use it now since my phone is is stuck.
Will someone tell me what to do?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731989
Instructions on how to enter download mode and use ODIN3 are in that thread.

kegobeer said:
Use ODIN3 to reflash. And you should post problems in the ROM's thread, not start a new one. And do a lot more reading...
Click to expand...
Click to collapse
Do this
1) GO to http://forum.xda-developers.com/showthread.php?t=731989 . Download I897UCJF6 - Odin3 One-Click Downloader:
http://www.thevod.org/misc/captivate...l-OCD-REV0.rar
2) Shutdown phone. Remove SIM and External SD Card.
3) Run the exe you just downloaded by Right clicking and then selecting "Run as administrator".
4) Put the phone in download mode. See instructions below
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold both Volume buttons (from i9000 just down, don't touch the power button)
Plug in the USB cable and continue holding both Volume buttons
5) Confirm that the phone is indeed in Download mode. You should see Yellow Triangle
6) Click Start
7) Wait for it to complete. You are now back to stock ROM.
Extra: Flashing to stock ROM will disable your ability to go to recovery/download mode using button combo. Please apply 3 button lagfix

MantaZumanity said:
I know how to use Odin3,
I just don't know how to use it now since my phone is is stuck.
Will someone tell me what to do?
Click to expand...
Click to collapse
Put your phone back in the box, take it back to AT&T and get an iphail.
Sent from my SAMSUNG-SGH-I897 using XDA App

cappysw10 said:
Put your phone back in the box, take it back to AT&T and get an iphail.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
LOL! That made my day!

It's flashing back to stock rom, thanks you guys!
I just won't flash a custom rom.

cnewsgrp said:
Extra: Flashing to stock ROM will disable your ability to go to recovery/download mode using button combo. Please apply 3 button lagfix
Click to expand...
Click to collapse
What are you talking about? This is massively incorrect. You only lose your 3 buttons ability to enter recovery or download mode depending on your particular phone. i have always had it working, have flashed back to stock countless times, and have never either lost my 3 buttons ability or needed the "3 button fix".
Look under your battery. There is a # on the sticker, i believe beneath the serial #. It is 100x.
1006=fine, no probs.
1007=iffy, some good and some bad.
1008=3button fix REQUIRED almost every time......

techmik67 said:
What are you talking about? This is massively incorrect. You only lose your 3 buttons ability to enter recovery or download mode depending on your particular phone. i have always had it working, have flashed back to stock countless times, and have never either lost my 3 buttons ability or needed the "3 button fix".
Look under your battery. There is a # on the sticker, i believe beneath the serial #. It is 100x.
1006=fine, no probs.
1007=iffy, some good and some bad.
1008=3button fix REQUIRED almost every time......
Click to expand...
Click to collapse
I have 1008. I lose 3 button combo everytime I flash to stock. Anyway there is no harm in reapplying it so why not recommend it? I don't want the OP to lose the ability.

techmik67 said:
What are you talking about? This is massively incorrect. You only lose your 3 buttons ability to enter recovery or download mode depending on your particular phone. i have always had it working, have flashed back to stock countless times, and have never either lost my 3 buttons ability or needed the "3 button fix".
Click to expand...
Click to collapse
Although you are correct that the one-click doesn't kill the button combos on all phones, it does on most batch 1008 phones and maybe all newer phones. It's a good idea to point people to the flasher that you know won't disable the combos, particularly when the person you are trying to help is pretty clueless about how all this stuff works.

cappysw10 said:
Put your phone back in the box, take it back to AT&T and get an iphail.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
+1. if you cant take on the responsibility of reading and basic comprehension, you deserve an iphone. let steve tell you how to use your phone.

Related

[Q] Phone stuck on black screen and vibrating

I think I screwed my Samsung Captivate up. I tried applying the Darky's rom on it while I still had the Cognition rom on it. Not sure if that would of caused a problem but now when my phone boots, it gives me the ATT screen, goes to black with the bottom row buttons lit up and the phone vibrates once and twice in quick succession. I'm not sure what I can do next.
I tried doing the 3 button trick and that just puts the phone in an endless restart loop without giving me recovery options.
You need to use Odin to get back to stock. Make sure your phone is off (pull battery and put it back in) then follow the steps in this link. Instead of using 3 button combo you'll just hold both volume buttons while plugging in the phone to the computer. It'll get you into download mode so you can revive your phone. Hope this helps.
http://forum.xda-developers.com/showthread.php?t=731989
duuhdave said:
You need to use Odin to get back to stock. Make sure your phone is off (pull battery and put it back in) then follow the steps in this link. Instead of using 3 button combo you'll just hold both volume buttons while plugging in the phone to the computer. It'll get you into download mode so you can revive your phone. Hope this helps.
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
I'm avoiding going back to stock so I don't loose my SDcard data.
any other solutions ?
and yes I did pull out the battery many times, same thing man.
one more thing. I can access download+recovery mode.
malcolmy said:
I'm avoiding going back to stock so I don't loose my SDcard data.
any other solutions ?
and yes I did pull out the battery many times, same thing man.
Click to expand...
Click to collapse
What sd card data? Going back to stock will not delete anything flashing darkys wouldn't, as long as you do not master clear
CM7
mcord11758 said:
What sd card data? Going back to stock will not delete anything flashing darkys wouldn't, as long as you do not master clear
CM7
Click to expand...
Click to collapse
My understanding, when repartitioning with odin, it formats everything.
right ?
Your pictures and music will survive unless you master clear
In either case I am not sure you have another option
CM7
I flashed the stock firmware, them flashed Ultimate 8.0.
It worked !!
Thanks guys.

[q] help i messed up big time

Help!
I have 2.2 on Rogers, rooted. I also have Cognition 3.04 installed as well as CWM. I tried to install a battery mod .zip file using CWM, but all that is happening now is that I am stuck on the startup screen (Cognition) and my Captivate just vibrates! In recovery using CWM 'reboot now' and 'reboot recovery' doesn't work. Is there anyway to 'bypass' my last (failed) installed .zip and go back to the home screen?
WHAT DO I DO? I have tried to use the recovery_update.zip file from CWM to get my phone working again but still no luck.
I SWEAR IF SOMEONE CAN HELP ME I WILL NEVER EVER TAMPER WITH MY PHONE AGAIN EVER. I WILL ONLY EVER USE IT FOR PHONE CALLS AND TEXTING. I WILL DO ANYTHING. PLEASE HELP!!!!
Can you get it into download mode?
If you can get back into recovery which it sound like you can just reflash the original rom zip.
Sent from my SGH-T959 using XDA App
Edit....and calm down, just a boot loop from a bad flash, no biggie. Though you should understand how to recover before you start.
I can get into download mode, now what?
Sorry I am clearly no good with this whole phone business...
How do I flash the original ROM when I can't get past the recovery screen? Could you please provide instructions? I am so scared! AAAARGH!
NewbDroid said:
I can get into download mode, now what?
Sorry I am clearly no good with this whole phone business...
Click to expand...
Click to collapse
if you can go into download, use odin to flash back to stock.
NewbDroid said:
How do I flash the original ROM when I can't get past the recovery screen? Could you please provide instructions? I am so scared! AAAARGH!
Click to expand...
Click to collapse
do not worry, i will be here to help you until you fix your phone.
Could you give me more instructions on Odin and flashing back to stock? I'm so sorry, if I knew how to do this I would not ask! Thanks SO MUCH!
NewbDroid said:
Could you give me more instructions on Odin and flashing back to stock? I'm so sorry, if I knew how to do this I would not ask! Thanks SO MUCH!
Click to expand...
Click to collapse
read the first sticky post in this Q & A section (question 3)... meanwhile, please let me know your build number. it is a 4 digit under your battery, looks like 1008, 1010, etc.
I think it's 10.11. th eonly other numbers are the IMEI, s/n and upc numbers.
NewbDroid said:
I think it's 10.11. th eonly other numbers are the IMEI, s/n and upc numbers.
Click to expand...
Click to collapse
ok, 1011 means build date is Nov 2010. you should just follow the link below to restore your phone:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Since you can go into download mode, do not worry, you should be fine in just a few minutes.
You can either download Designgears Odin One Click where baiscally you put it into DOWNLOAD ** and click "flash" or w.e and it puts your phone back to stock or you can use a new tool http://forum.xda-developers.com/showthread.php?t=944418 < dont know how that is have never treid. Basically theyre both one click so shouldnt be too hard.
steps r put ur phone into DOWNLOAD MODE aka, shut off phone take of sim + microsd if you have any, then put battery back in, while holding both volume buttons pressed, plug in USB cable (MAKE SURE YOU HAVE ODIN OPENED FIRST), once your in the recovery screen you should see the COM:12 or something like that on odin (also make sure you have samsung usb drivers installed.)
press flash and should put it back to stock. IF THAT DOESNT WORK, you MIGHT have an internal SD card that is dead. then your phone is useless(never had this happen to me on captivate, just on vibrant i9000m)
Good luck.
ed116 said:
You can either download Designgears Odin One Click where baiscally you put it into DOWNLOAD ** and click "flash" or w.e and it puts your phone back to stock or you can use a new tool http://forum.xda-developers.com/showthread.php?t=944418 < dont know how that is have never treid. Basically theyre both one click so shouldnt be too hard.
steps r put ur phone into DOWNLOAD MODE aka, shut off phone take of sim + microsd if you have any, then put battery back in, while holding both volume buttons pressed, plug in USB cable (MAKE SURE YOU HAVE ODIN OPENED FIRST), once your in the recovery screen you should see the COM:12 or something like that on odin (also make sure you have samsung usb drivers installed.)
press flash and should put it back to stock. IF THAT DOESNT WORK, you MIGHT have an internal SD card that is dead. then your phone is useless(never had this happen to me on captivate, just on vibrant i9000m)
Good luck.
Click to expand...
Click to collapse
please note one-click will NOT work here since the build number is 1011.
Thanks so much for th ehelp so far, what I am worried about is flashing it to i897 (AT&T) instead of i896 (Rogers) which has happened before. When that happened the phoen refused to recognize my SIM card, etc and I had to bring it back into the store to be shipped back to the factory, etc.
Any idea if this will bring me to i897 or i896?
Thanks again!
think this might help? it was on the first page of the dev forum
http://forum.xda-developers.com/showthread.php?t=905042
NewbDroid said:
Thanks so much for th ehelp so far, what I am worried about is flashing it to i897 (AT&T) instead of i896 (Rogers) which has happened before. When that happened the phoen refused to recognize my SIM card, etc and I had to bring it back into the store to be shipped back to the factory, etc.
Any idea if this will bring me to i897 or i896?
Thanks again!
Click to expand...
Click to collapse
basically 897 and 896 are same. if you really want to flash to roger rom, you may need to search the forum for that.
Alright I'm going to try using the one on that link you posted, for Clockwork Recovery Flashable: (To be applied from Stock 2.1). However, I will be applying it from 2.2. Do you think it might still work?
Pirateghost said:
think this might help? it was on the first page of the dev forum
http://forum.xda-developers.com/showthread.php?t=905042
Click to expand...
Click to collapse
this should be fine, use odin since you are able to get into download mode.
can you still get into clockwork?
Yes I can still get into clockwork. Thanks again for all the help so far, I really appreciate it!

[Q] Captivate wont boot, stuck on AT&T logo

hi all, I have my captivate stuck on the at&t logo, I cant get it to recovery mode. is there an "idiot" guide of how to flash it into recovery or back to the stock version?
thanks in advance!
Use odin to flash back to stock. Just search it. Will correct any mistakes you made.
Sent from my SAMSUNG-SGH-I897 using XDA App
What did you do to get it this way?
im stuck on the same thing i cant get into download mode though
becuse my phone ethier boots into the battery screen and doent stop boot again and again
or
it goes to the att screen and then turns off and goes to the screen again and again
i just update it to the ofical 2.2 and flashed backed using ondin3 one click to root the phone
how do u force the phone into download mode
ive tried all the butto combutions
Well,
axis01 said:
What did you do to get it this way?
Click to expand...
Click to collapse
I used clockwork mod and formatted all of the options including system and etc etc
UnBrickable mod is easier then 3 button fixes or jigs.. Simply remove the battery, replace the battery, plug into USB, then click the "Download Mode" button. After that, use a Heimdall One-Click to flash software. There's no fooling around with timing or trying to get the order correct, or anything... it just goes into download mode every time.
Just thought I'd put that in here. I like UBM, it's great.
I did the same, you found the solution?
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
charlie2610 said:
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
Click to expand...
Click to collapse
Did you find the solution, because i´m in the same problem but worst because my sgs2 doesn´t turn on anymore, please help
charlie2610 said:
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
Click to expand...
Click to collapse
You have a few options and these options are as much as we can help you here.
1) Keep trying the button combos. It just might work one of these times. If you ever get it into download mode then try to flash it back to stock immediately.
2) Buy a Jig. They are available for cheap and will probably help you out. They force your phone into download mode and will allow you to flash it then.
3) Do the unbrickable mod. This involves sending your phone off for a few days, spending some cash, and having it worked on. It will come back in working order and there are even ways to have the person who worked on it flash a custom rom for you.
These are your options. And honestly, more than telling you the above, I dont think there is much more help we can offer here.
EDIT: Holy hell I just realized this post is from April. I just wasted a few minutes typing all of that. Damn.
yea. Thread resserection
Sent from my Captivate using XDA App on Team Hacksung ICS

possibly bricked??

I just recieved a new captivate via a warranty issue. Welll this one came with froyo 2.2 already loaded. My last capitvate had serendipity 6.4 installed and had no problems with flashing that one. Since I go my new captivate I wanted to try flashing a new ROM of course. So I decided on continuum v4. Here is where my problem started I opened odin3 plugged the phone in while holding the volume buttons and sent it into download mode. then clicked start on odin and let it do its thing. it got where it said "removed" in the bottom part and "RESET" up in the green bar. after looking at my phone it was just a black screeen with the battery charging symbol loading. it would come up and then disappear and come back up. it kept doing this for a while. this is where i made the mistake....after waiting a while i unplugged the phone from the computer to see if it would even start or anything. Well of course it wont start at all. it gets stuck at the AT&T screen and wont go any further. I can't get it back into download mode and dont know what to do? is my phone a paperweight now? IF anyone can help, i would greatly appreciate it. Either via here or phone. I've got my sim card back in my backflip right now.
what do you guys think?
Use a jig... search on how to make it. Its decently simple and it costs 99 cents for resistors and a cut up usb cable
Sent from my captivate using XDA Premium App
kschumake83 said:
Use a jig... search on how to make it. Its decently simple and it costs 99 cents for resistors and a cut up usb cable
Sent from my captivate using XDA Premium App
Click to expand...
Click to collapse
this jig is my only option??
s13envy said:
this jig is my only option??
Click to expand...
Click to collapse
Can you get into recovery?
You could also buy a jig, but idk if im allowed to post the link so just pm me if you need it.
You could look up more than one way of getting into download mode. (there are several) Ill see if I can find them for you.
mossination said:
Can you get into recovery?
You could also buy a jig, but idk if im allowed to post the link so just pm me if you need it.
You could look up more than one way of getting into download mode. (there are several) Ill see if I can find them for you.
Click to expand...
Click to collapse
i try holding the volume buttons and plugging the phone in which worked to get into download mode just before i ****ed it up. it doesn't work anymore it just loads the battery gauge and flashes on and off....if i hold the volume buttons and hit the power button the at&t screeen just flashes on and off infinitely
s13envy said:
i try holding the volume buttons and plugging the phone in which worked to get into download mode just before i ****ed it up. it doesn't work anymore it just loads the battery gauge and flashes on and off....if i hold the volume buttons and hit the power button the at&t screeen just flashes on and off infinitely
Click to expand...
Click to collapse
Try this, I found it by googling
I've had success with this method to get into Download Mode:
1. Remove battery, SIM and microSD from phone (if you have one)
2. Wait at least 10 seconds with the phone in this state
3. Plug your phone into your computer (this step has always been optional for me)
4. Hold Volume Up/Down, don't let go!
5. While holding both volume keys, insert the battery
mossination said:
Try this, I found it by googling
I've had success with this method to get into Download Mode:
1. Remove battery, SIM and microSD from phone (if you have one)
2. Wait at least 10 seconds with the phone in this state
3. Plug your phone into your computer (this step has always been optional for me)
4. Hold Volume Up/Down, don't let go!
5. While holding both volume keys, insert the battery
Click to expand...
Click to collapse
no luck at all with that method
my question is what caused odin to fail on me? do i need a different version of odin to flash a captivate that came factory with froyo 2.2?
s13envy said:
no luck at all with that method
my question is what caused odin to fail on me? do i need a different version of odin to flash a captivate that came factory with froyo 2.2?
Click to expand...
Click to collapse
Lot of things could of happened, mainly because something might have happened to the wired connection between the pc and phone during the process. Im sorry I don't know the answer to the second question though. Maybe because the odin you were using was going back to stock "eclair" and not stock froyo?
Sent from my SAMSUNG-SGH-I897 using XDA App
mossination said:
Maybe because the odin you were using was going back to stock "eclair" and not stock froyo?
Sent from my SAMSUNG-SGH-I897
Click to expand...
Click to collapse
Eclair, froyo, and now gingerbread same odin process.
Unless it's the one click version which I think only comes in eclair flavored.
Then the only other option I can think of for him is a jig.
Sent from my SAMSUNG-SGH-I897 using XDA App
http://www.youtube.com/watch?v=j4G1L8lV6LQ
studacris said:
http://www.youtube.com/watch?v=j4G1L8lV6LQ
Click to expand...
Click to collapse
Lol, the guy who sells those jigs could make a commercial with that.
Sent from my SAMSUNG-SGH-I897 using XDA App
studacris said:
Eclair, froyo, and now gingerbread same odin process.
Unless it's the one click version which I think only comes in eclair flavored.
Click to expand...
Click to collapse
i was using the odin3 one click downloader trying to flash 2.1 to my stock 2.2 captivate. are you saying that there is a different version of odin that i'll need to use if my cappy came factory with 2.2?
i guess im on my way to radio shack now to find some 100k ohm resistors.
s13envy said:
i was using the odin3 one click downloader trying to flash 2.1 to my stock 2.2 captivate. are you saying that there is a different version of odin that i'll need to use if my cappy came factory with 2.2?
Click to expand...
Click to collapse
Yes there are a few versions of odin but, either will work fine ... It's been reported that the one click will remove the 3 button fix in some phones with build numbers later than 1010, that info can be found under the battery btw, I've personally never had that problem, I flash and mod 3 captivates 1. Is a1010, 2. Are 1012's. All I've used is the one click version and they all still have 3 button combo.
There is an odin that flashes the 3 button combo while it flashes to stock, if you either never had it or have lost it ... Which I suggest you look for and use after you get jiggy with it so you'll have the combo for future use.
after making the jig with the resistors and everything, instead of going to download mode it just tries to turn the phone on and flashes the at&t screen on and off repeatedly....not sure what to try now
Scratch that. Was doing it barehanded and it would just try turning it on. I used some gloves and got it into download mode. Now I just need to plug it into my computer with odin alredy opened and once it recognizes and click start and let it do its thing right? And just don't unplug it right? What should I do if odin freezes up?
Sent from my MB300 using XDA App
dont use ODIN one click. try AIO captivate toolbox 3.0. it uses heimdall which i have found to be much better for me
might have another problem now. i think the battery is dead on my phone. **** just doesn't want to work out for me. if i plug the phone in all i get is a battery icon that will flash on for a sec, then disappear. it will do this and only this forever. FML
Do you mean when the phone is off?
Sent from my GT-I9000 using XDA App

Is my P1010 bricked?

I have rooted my P1010 for about 3 months now and now and again it used to freeze and have a black screen but the key at the bottom would still be lit up. But now all of a sudden the tab will not turn on at all. I have left it on the charge over night but still no sign of it turning on. Does this mean its bricked? I just dont know why it done this all of a sudden.
Hm... Maybe you just need to force the shutdown(Power button+Vol- button) and turn on again(power button).
samcortez said:
Hm... Maybe you just need to force the shutdown(Power button+Vol- button) and turn on again(power button).
Click to expand...
Click to collapse
Thanks, I'll try that.
Nope unfortunately that didnt work either
Can you boot into download mode?
If not then its likely screwed. Send it in for repair.
TheATHEiST said:
Can you boot into download mode?
If not then its likely screwed. Send it in for repair.
Click to expand...
Click to collapse
Bro, there is this unbrickable mod you still can do. As long as you don't fry any hardware, there is nothing you can do software-wise to really brick your device. You are owning a very special device. A true Lazarus. Don't give up.
But as TheATHEiST mention, you may want to try this, bro:
Plug it into computer, start odin and press Power + Volume down for at least 5 seconds. See if Odin can catch your device. If Odin still can catch it, then it is in download mode - with blank screen.
slyv3 said:
Bro, there is this unbrickable mod you still can do. As long as you don't fry any hardware, there is nothing you can do software-wise to really brick your device. You are owning a very special device. A true Lazarus. Don't give up.
But as TheATHEiST mention, you may want to try this, bro:
Plug it into computer, start odin and press Power + Volume down for at least 5 seconds. See if Odin can catch your device. If Odin still can catch it, then it is in download mode - with blank screen.
Click to expand...
Click to collapse
Unfortunately this didnt work What would my best route be now? Sell it on ebay as faulty or where would i get it repaired without paying big bucks?
mckee118 said:
Nope unfortunately that didnt work either
Click to expand...
Click to collapse
Go to the development forum, follow the instructions in the unbrickable mod thread.
http://forum.xda-developers.com/showthread.php?t=1257434
http://forum.xda-developers.com/showthread.php?t=1312391
P.s. if you posted this in the Q&A section we could hv helped you a lot earlier.
I am currently running windows 7 so what would my best option be to do this?
Also now all of a sudden when I connect the tab through usb I can get it into download mode for 1 second then it just flashes on and off on the boot screen. If I leave it for a while it will sometimes go into recovery mode but I cant seem to flash anything or factory reset.
EDIT: WE GOT IT FIXED GUYS!!! Thanks for your help guys. I just kept forcing it into recovery and factory resetting it until it rebooted. What do you think caused it to do that? Should I unroot it or flash a different rom? Or did that just happen by chance?

Categories

Resources