Related
Bricked > Made Jig > Got in download mode > Flashing with Odin > Still loop problem
So i bricked my phone , my 3 button wasnt working , so i made a Jig (and super thanks to ppl who started that) ... got it in download mode, Now im flashing it with Odin and it goes through fine (sayin Pass and all that) but im still getting the same problem , either it gets stuck on the big S or the GT19000M keeps flashing...
anyone else got tht problem ? or what am i doing wrong ?
** I was using the Legendary Steel Edition rom before i messed up my phone
Now im trying to back to stock rom but it wont work
I have the Bell Galaxy S , if tht matters
zx6r_98 said:
So i bricked my phone , my 3 button wasnt working , so i made a Jig (and super thanks to ppl who started that) ... got it in download mode, Now im flashing it with Odin and it goes through fine (sayin Pass and all that) but im still getting the same problem , either it gets stuck on the big S or the GT19000M keeps flashing...
anyone else got tht problem ? or what am i doing wrong ?
** I was using the Legendary Steel Edition rom before i messed up my phone
Now im trying to back to stock rom but it wont work
I have the Bell Galaxy S , if tht matters
Click to expand...
Click to collapse
Its just a matter of getting the right rom jm8 for me and many others works well and repartition, pit etc if you tick repartition try not ticking it, pit and no pit etc
tragusman said:
Its just a matter of getting the right rom jm8 for me and many others works well and repartition, pit etc if you tick repartition try not ticking it, pit and no pit etc
Click to expand...
Click to collapse
I tried JH2 , and a whole bunch of other roms, so far no luck ... any other SGS Bell users ??? what is the stock rom for Bell GTI9000M ??
and is there any other way to find out what rom i was on ? lol
I finally got my phone to download mode and finally ODIN recognized my galaxy , now no roms are working
zx6r_98 said:
I tried JH2 , and a whole bunch of other roms, so far no luck ... any other SGS Bell users ??? what is the stock rom for Bell GTI9000M ??
and is there any other way to find out what rom i was on ? lol
I finally got my phone to download mode and finally ODIN recognized my galaxy , now no roms are working
Click to expand...
Click to collapse
JL2 is the stock rom you can get it from here http://forum.xda-developers.com/showthread.php?t=846913
For specific guide for bell go here http://forum.xda-developers.com/showthread.php?t=853950
Tried JM8 , JH2 , JH9 .... all of these didnt work ... any other ideas ?????
JH2 seems to take me to recovery mode after flashing, and then when i wipe all data and reboot , it gets stuck on the big S ... this is gettin on my nerves now
I can get it to recovery mode after flashing but i always get the error Cant mount sdcard...
any suggestions ?? does this mean my sd card is done ?
i had the same problem and here is how i fix'ed it:
i made a jig tool like you and got it into download mode then installed I9000XWJM8
useing odin. you can download it from samfirmware.com.
and while the phone was boting up i used adb.
while the phone is booting up try adb shell
if you get into the shell type "reboot recovery"
and install Clockworkmod from clockworkmod install a new firmware.
hope that works
it did for me.
zanderdk said:
i had the same problem and here is how i fix'ed it:
i made a jig tool like you and got it into download mode then installed I9000XWJM8
useing odin. you can download it from samfirmware.com.
and while the phone was boting up i used adb.
while the phone is booting up try adb shell
if you get into the shell type "reboot recovery"
and install Clockworkmod from clockworkmod install a new firmware.
hope that works
it did for me.
Click to expand...
Click to collapse
umm when exactly do i goto adb recovery mode ? when odin is finished with flashing and my phone goes to recovery ? and do i install clockworkmod frm adb then ???
and when in recovery mode it gives me the error .. : cant mount sdcard ... were u having the same problem ???
Your internal SD might be corrupt if you can get in to recovery after you flash and it gives you a error message it might be. If it is, it needs to be fixed by bell.
good luck
hi XDA members ..
am kinda new on this stuff "noob".
i bought my sgs (GT I9000) from KSA with (and am not sure) I9000JPJG8 frimware.
the whole story is that i tried to upgrade to froyo but the process didn't when well and odin was stuck. so i ignorantly pulled the usb out, and had that phone->attention-> pc sign. but i was able to get to download mode. later i noticed that i used a I9000M froyo firmware.
anyway, i read through threads about semi-bricked sgs and found that i must reflash again my stock firmware, and that's what i did.
the odin flash is successful and the phone shows the galaxy s startup screen and then that loading sign and the loop starts ( loading sign appears - disappears -appear again ..etc) i pulled out the battery and powered it on to have a Galaxy s startup screen loop also.
i can't get to recovery mode, and here the names of the firmware i used to flash:
I9000JPJG8
I9000JPJPG
I9000JVJPF
I9000UGJH2
i need the firmware to have arabic support so that's why those above where my choices, but i wouldn't mind losing arabic for z sake of my new sgs
sorry if my english is bad
suggestions???!! and thanx in advance
have you been flashing these firmwares with PIT file ??
i think thats whats needed,
try to flash stock eclair 2.2 or froyo 2.2.1 with all 3 files and 512 pit.
i tried all .pit files to no avail...
and what do u mean by eclair 2.2 , isn't it 2.1 ??! and do u mean pit512 , 513 , 803 by the 3 files or what?
thx for replying
edit:
do u recommend certain odin version because i don't know which to use exactly ?
yea sorry i mean eclair 2.1
whenever i have trouble like you, i flash JM1 in all 3 files (phone pda csc ) and 512 pit, with the repartition box in odin checked.
works a treat everytime
i tried it but it stopped in z middle and odin said (FAIL)
have you made sure KIES is closed, even in the icon tray ??
Are you using odin 1.7 ??
also try to connect your phone direct to the motherboard
if it still fails, post me a screenshot of what odin looks like before you press start
oh my .. kies was closed in icon tray but there were some kies related stuff running when i opened the tasked manager. but unfortnately nothing happened , same things are still there.
here z pic , doing the method u mentioned before
h*tp://imageshack.us/photo/my-images/696/odink.png/
right the problem is you are using a firmware compressed into 1 .tar file
remove the pit file - uncheck re partition
remove phone
remove CSC
all you want is OJP_JG9.tar loaded into PDA.
A MAJOR UPDATE ..
while waiting for replies i tried this method in this post using eugene froyo :
http://forum.xda-developers.com/showpost.php?p=10498057&postcount=14
suprisingly my phone now changed to vibrant on start-up and has z following :
froyo 2.2
baseband T959UVJK2
kernel 2.6.32.9
now that it is alive .. can i shift to z froyo 2.2 with arabic support or do u suggest that i stick to it ?
i think i'll change since everything is messed up ..
vol. buttons are reversed .. music is not played through speaker unless head-phones are used .. numerous apps crashing ..
man am soo confused
you have flashed samsung vibrant on your samsung galaxy
that is why you have these problems !
did you download a GALAXY I9000 ROM ?? if not do so now.
Flash it in odin.
If it comes in 3 files (PDA, Phone, CSC) add 512 PIT and select re-partition
If it comes in 1 .tar file. Load it into PDA and DO NOT USE PIT OR REPARTITION
hit start and done, its so simple.
you really ought to read instructions before you go flashing ROMs.
i really did but it looks like i didn't pay attention to GT I9000/M thing ..
ok thanx for z help and i'll reply back when done with z ROM
i hate to be demanding but can u give me links cause am sick of downloading wrong files ((
www.samfirmware.com
http://forum.xda-developers.com/showthread.php?t=846913
so now my phone powers off when connected with usb ... what shall i do ????
can you boot into recovery ? if so do a full factory reset and try again. and try to flash a rom in recovery (if you have 2e)
i have no idea why the phone powers off with usb.
does it do this in download mode too ??
did you flash a stock rom ?? if so what rom did you choose
i flashed eugene froyo
should i use I9000 method or vibrant method for recovery ??
i got into recovery when i flshed the vibrant rom back then .. :s
edit: a question , have i lost z root thing when i flashed the vibrant or not ?
first of all enter download mode . Try this method ( press home and volume down and insert the usb conected at pc ) , and flash darky resurection 9.2 or ezrom 2.2.1 , i think both have bootloaders , I prefer ezrom ( saved my phone after CM7 or miui )
Hello guys ,
When trying to install a theme i got bootloops . Hence i tried to restore my backup using CWM . I was on 2.3.3 . But the backup did`nt get restored , hence i downloaded the xxjvq 2.3.4 firmware , flashed it with odin , and the fone booted fine .
Now i wanted to root the 2.3.4 , i downloaded this file "CF-Root-XX_UNK_JVQ-v3.7-CWM3RFS.tar"
Flashed this with odin , and now the fone is not booting up :S . I can go into the download mode . I tried flashing the same xxjvq rom via odin , but now odin is giving me Fail .
Please help me out here
Hi,
May be the downloaded firmware is corrupted. That could be the reason its failing.
Try this link out (GingerReal - V7.1.4 JVQ) It has clear instructions how to flash a custom rom and all the downloads.
Here is another link (Martux ROM V3) as well, with JVR base rom link.
Here are the deodexed versions by Ramad.
Hope this helps you
Try reinstall your USB Drivers or Download a JVR from Samfirmware and check, if it will be pass its corrupted JVQ, if fail, you need reinstall USB Drivers
Thanks a bunch guys ! finally manged to install Miui Rom in the phone ! working flawless now !
But there is one prb ! ..i cannot see the Clock work mod now , how am i supposed to boot into recovery now ?
Ok got into the recovery mode now ! . But there is one more problem now ! i select the install zip from sd card and press the home button , it doesnot select it . It got back , like the home screen button using acting like the volume button .
Any suggestions ?
Got it once again seems like the power button was the button for enter function ! m learning fast !
I have the GT-S5570i version of this phone, and I tried to install CWM recovery but I accidentally flashed the "normal" GT-S5570 CWM, so now my phone stucks on the Samsung logo.
Does it mean that my phone is bricked? If it does, how can I fix it?
If u can go into recovery mode .....
try wipe data / factory reset ...
If u can't go into recovery mode then u need to flash using stock ROM with ODIN by download mode ...
@Pr3no
I assumed that u have single file (with md5 extension file name) original firmware ...
what u have to do is ...
put the phone to download mode ...
Run the Odin ...
connect phone to PC ...
(Odin must detect the phone)
then click on PIT button and choose the PIT file ...
then click on PDA and choose the single file (file with md5 extension) ...
then remove the tick in the "Re-partition" box ...
then click on start to flash ...
But may not work ....
Because I've done this b4 on my GT-S5570i ...
Try and see if this work on your phone ...
If not follow this POST ...
That POST is what I did on my phone ...
I hope that method shall work with your phone too ...
Try and let me know ...
every one give me a PIT file for Galaxy mini 2 s6500 (not s6500d)
i try with "JENA_Secure_NonNFC_1109.zip" and it not work for me
more info
detail for "it not work for me":
my phone is loop in booting when i use ODIN with: "JENA_Secure_NonNFC_1109" PIT file + my stock rom
I think the problem is not in my stock rom because in past, i used this stock rom (not with "JENA_Secure_NonNFC_1109" PIT file) and it worked
askereverywhere said:
detail for "it not work for me":
my phone is loop in booting when i use ODIN with: "JENA_Secure_NonNFC_1109" PIT file + my stock rom
I think the problem is not in my stock rom because in past, i used this stock rom (not with "JENA_Secure_NonNFC_1109" PIT file) and it worked
Click to expand...
Click to collapse
Install cwm on phone, and wipe data and system and cache.
Then flash s6500 stock rom with odin in pda column. Stock rom, it have partition file inside..i guess, it will be flashed.
MaDaLiNoSt said:
Install cwm on phone, and wipe data and system and cache.
Then flash s6500 stock rom with odin in pda column. Stock rom, it have partition file inside..i guess, it will be flashed.
Click to expand...
Click to collapse
thank for support me. BUT:
after repartition with that "unsecure_non_nfc" PIT by ODIN, I face with these problem:
1- I can not enter normal boot (loop)
2- I can not enter recovery mod (i use volumdown + vollumup + home + power but there is nothing happen). I flash CWM by ODIN but there is no change
3- I only can use DOWNLOAD mod
I dont clearly understanding about "partition, PIT, ... in android" , but I think the problem is "partition crash"
please continue help me
askereverywhere said:
thank for support me. BUT:
after repartition with that "unsecure_non_nfc" PIT by ODIN, I face with these problem:
1- I can not enter normal boot (loop)
2- I can not enter recovery mod (i use volumdown + vollumup + home + power but there is nothing happen). I flash CWM by ODIN but there is no change
3- I only can use DOWNLOAD mod
I dont clearly understanding about "partition, PIT, ... in android" , but I think the problem is "partition crash"
please continue help me
Click to expand...
Click to collapse
Just look around in this forum ..there are 2-3 threads with how to fix recovery if is not shown or get ramdump.
And please explain more about 1) no normal boot...did you stuck on : samsung logo / galaxy mini 2 / boot animation.
MaDaLiNoSt said:
Just look around in this forum ..there are 2-3 threads with how to fix recovery if is not shown or get ramdump.
And please explain more about 1) no normal boot...did you stuck on : samsung logo / galaxy mini 2 / boot animation.
Click to expand...
Click to collapse
OK thank you so much
+ In the evening, the loop is: boot animation (I see anmation). But in the night, when I try flash CWM by ODIN (then I still can not enter recovery), the loop is: samsunglogo -> galaxymini2-> samsunglogo -> .... (I did not see animation) :laugh:
+ when I try re-partition (still with the "unsecure_non_nfic" PIT file) by ODIN, the ODIN show error: "re-partion operation falled" and my phone show: "secure check false: 0x95"
+ and now, when I try flash stock rom (not include PIT file) by ODIN the loop is: animation again
I feel my phone rom is now so mess
askereverywhere said:
+ and now, when I try flash stock rom (not include PIT file) by ODIN the loop is: animation again
I feel my phone rom is now so mess
Click to expand...
Click to collapse
Ok you really need to force recovery to wipe data &system ..but please DO NOT EVER TRY AFTER REPAIR .PIT FILES!
MAKE SURE THAT YOU ALREADY FLASHED CLOCKWORKMOD RECOVERY!
1) remove battery and put in again in phone
2) go to download mode, but do not skip first screen
3) Logical: Pressing down button will reboot phone...but down + up + reboot = recovery
so...press vol down and vol up..and just hold it until you will see cwm logo ( please flash cwm 6.0.3.3 !)
Repeat: first press vol down and then wol up ! at but faaasstt!
4) CWM is now booting...wipe system and data
5) reflash stock rom...without any pit file!!!!!!!! (don't every try againg to use .pit! )
If your problem is not solved repeat all steps many times!!! TO RECOVER MY PHONE I NEED 1-2 HOURS!
MaDaLiNoSt said:
Ok you really need to force recovery to wipe data &system ..but please DO NOT EVER TRY AFTER REPAIR .PIT FILES!
MAKE SURE THAT YOU ALREADY FLASHED CLOCKWORKMOD RECOVERY!
1) remove battery and put in again in phone
2) go to download mode, but do not skip first screen
3) Logical: Pressing down button will reboot phone...but down + up + reboot = recovery
so...press vol down and vol up..and just hold it until you will see cwm logo ( please flash cwm 6.0.3.3 !)
Repeat: first press vol down and then wol up ! at but faaasstt!
4) CWM is now booting...wipe system and data
5) reflash stock rom...without any pit file!!!!!!!! (don't every try againg to use .pit! )
If your problem is not solved repeat all steps many times!!! TO RECOVER MY PHONE I NEED 1-2 HOURS!
Click to expand...
Click to collapse
OK thank you so much, I will try :silly:
askereverywhere said:
OK thank you so much, I will try :silly:
Click to expand...
Click to collapse
Problem is solved?
MaDaLiNoSt said:
Problem is solved?
Click to expand...
Click to collapse
Oh my god, it work :good::good::good::good::good: haha thank you so much, happy to see myphone work again
(but in fisrt screeen of DOWNLOAD mode, it should be: vol up + vol down + [home])
after wide data,catch,.. the loop was disapear and I can enter RECOVERY mode with normal way. Can you teach me some knowleage why bootting is effect by wide data,.. (i think bootting is only effect by boot.img)
:highfive:
@MaDaLiNoSt .. What is "Secure check fail 0x95" ?? I get that message too in Odin when I tried to flash the Pit File ..I hate it .. And I can't Even flash stock rom with odin .. I've tried several time .. It always failed in "Fat.bin" ?? Im not really sure what that is ..
the chossen one
Ezzam_Itachi said:
@MaDaLiNoSt .. What is "Secure check fail 0x95" ?? I get that message too in Odin when I tried to flash the Pit File ..I hate it .. And I can't Even flash stock rom with odin .. I've tried several time .. It always failed in "Fat.bin" ?? Im not really sure what that is ..
Click to expand...
Click to collapse
replace me manage the threads :laugh:
Ezzam_Itachi said:
@MaDaLiNoSt .. What is "Secure check fail 0x95" ?? I get that message too in Odin when I tried to flash the Pit File ..I hate it .. And I can't Even flash stock rom with odin .. I've tried several time .. It always failed in "Fat.bin" ?? Im not really sure what that is ..
Click to expand...
Click to collapse
OK
1) WHY DO YOU FLASH PIT FILES??
Pit files are used when on your screeen appear partition fail ! Else is not useful!
2) Secure check fail is:
-Phone doesn't need pit at this moment
-you renamed the file
-file was damaged
-file is incompatible with firmware
-odin is outdated
-antivirus conflict while reading file
If you fail in fat.bin
-your rom is not compatible
-phone /system damage (need wipe and reflash)
-rom is wrong builded
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
askereverywhere said:
Oh my god, it work :good::good::good::good::good: haha thank you so much, happy to see myphone work again
(but in fisrt screeen of DOWNLOAD mode, it should be: vol up + vol down + [home])
after wide data,catch,.. the loop was disapear and I can enter RECOVERY mode with normal way. Can you teach me some knowleage why bootting is effect by wide data,.. (i think bootting is only effect by boot.img)
:highfive:
Click to expand...
Click to collapse
Yeah, i forgot to tell you about +home button
MaDaLiNoSt said:
OK
1) WHY DO YOU FLASH PIT FILES??
Pit files are used when on your screeen appear partition fail ! Else is not useful!
2) Secure check fail is:
-Phone doesn't need pit at this moment
-you renamed the file
-file was damaged
-file is incompatible with firmware
-odin is outdated
-antivirus conflict while reading file
If you fail in fat.bin
-your rom is not compatible
-phone /system damage (need wipe and reflash)
-rom is wrong builded
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
Yeah, i forgot to tell you about +home button
Click to expand...
Click to collapse
I tried to flash PIT bcause I got problem with internal storage in KITKAT rom .. But nevermind .. Im satissfied with CM10.1 :angel: ..
Now about the failure in "Fat.bin" .. I've checked it just now .. In Download mode it said "Secure Check Fail : ID 0xc" .. what is that ?? Im very sure my phone model is GTS-6500D .. But in Download mode It was GTS-6500 !! And the baseband is clearly diferent from the one in "about Phone" setting .. But I still can use it tho ..
Ezzam_Itachi said:
I tried to flash PIT bcause I got problem with internal storage in KITKAT rom .. But nevermind .. Im satissfied with CM10.1 :angel: ..
Now about the failure in "Fat.bin" .. I've checked it just now .. In Download mode it said "Secure Check Fail : ID 0xc" .. what is that ?? Im very sure my phone model is GTS-6500D .. But in Download mode It was GTS-6500 !! And the baseband is clearly diferent from the one in "about Phone" setting .. But I still can use it tho ..
Click to expand...
Click to collapse
AS I SAID... you flashed an wrong rom.. you need to flash an s6500D rom not s6500. I never see an error in odin! Because I know what I am doing.
MaDaLiNoSt said:
AS I SAID... you flashed an wrong rom.. you need to flash an s6500D rom not s6500. I never see an error in odin! Because I know what I am doing.
Click to expand...
Click to collapse
Will try something else .. Thanks for your reply !!