Hello guys ,
When trying to install a theme i got bootloops . Hence i tried to restore my backup using CWM . I was on 2.3.3 . But the backup did`nt get restored , hence i downloaded the xxjvq 2.3.4 firmware , flashed it with odin , and the fone booted fine .
Now i wanted to root the 2.3.4 , i downloaded this file "CF-Root-XX_UNK_JVQ-v3.7-CWM3RFS.tar"
Flashed this with odin , and now the fone is not booting up :S . I can go into the download mode . I tried flashing the same xxjvq rom via odin , but now odin is giving me Fail .
Please help me out here
Hi,
May be the downloaded firmware is corrupted. That could be the reason its failing.
Try this link out (GingerReal - V7.1.4 JVQ) It has clear instructions how to flash a custom rom and all the downloads.
Here is another link (Martux ROM V3) as well, with JVR base rom link.
Here are the deodexed versions by Ramad.
Hope this helps you
Try reinstall your USB Drivers or Download a JVR from Samfirmware and check, if it will be pass its corrupted JVQ, if fail, you need reinstall USB Drivers
Thanks a bunch guys ! finally manged to install Miui Rom in the phone ! working flawless now !
But there is one prb ! ..i cannot see the Clock work mod now , how am i supposed to boot into recovery now ?
Ok got into the recovery mode now ! . But there is one more problem now ! i select the install zip from sd card and press the home button , it doesnot select it . It got back , like the home screen button using acting like the volume button .
Any suggestions ?
Got it once again seems like the power button was the button for enter function ! m learning fast !
Related
Bricked > Made Jig > Got in download mode > Flashing with Odin > Still loop problem
So i bricked my phone , my 3 button wasnt working , so i made a Jig (and super thanks to ppl who started that) ... got it in download mode, Now im flashing it with Odin and it goes through fine (sayin Pass and all that) but im still getting the same problem , either it gets stuck on the big S or the GT19000M keeps flashing...
anyone else got tht problem ? or what am i doing wrong ?
** I was using the Legendary Steel Edition rom before i messed up my phone
Now im trying to back to stock rom but it wont work
I have the Bell Galaxy S , if tht matters
zx6r_98 said:
So i bricked my phone , my 3 button wasnt working , so i made a Jig (and super thanks to ppl who started that) ... got it in download mode, Now im flashing it with Odin and it goes through fine (sayin Pass and all that) but im still getting the same problem , either it gets stuck on the big S or the GT19000M keeps flashing...
anyone else got tht problem ? or what am i doing wrong ?
** I was using the Legendary Steel Edition rom before i messed up my phone
Now im trying to back to stock rom but it wont work
I have the Bell Galaxy S , if tht matters
Click to expand...
Click to collapse
Its just a matter of getting the right rom jm8 for me and many others works well and repartition, pit etc if you tick repartition try not ticking it, pit and no pit etc
tragusman said:
Its just a matter of getting the right rom jm8 for me and many others works well and repartition, pit etc if you tick repartition try not ticking it, pit and no pit etc
Click to expand...
Click to collapse
I tried JH2 , and a whole bunch of other roms, so far no luck ... any other SGS Bell users ??? what is the stock rom for Bell GTI9000M ??
and is there any other way to find out what rom i was on ? lol
I finally got my phone to download mode and finally ODIN recognized my galaxy , now no roms are working
zx6r_98 said:
I tried JH2 , and a whole bunch of other roms, so far no luck ... any other SGS Bell users ??? what is the stock rom for Bell GTI9000M ??
and is there any other way to find out what rom i was on ? lol
I finally got my phone to download mode and finally ODIN recognized my galaxy , now no roms are working
Click to expand...
Click to collapse
JL2 is the stock rom you can get it from here http://forum.xda-developers.com/showthread.php?t=846913
For specific guide for bell go here http://forum.xda-developers.com/showthread.php?t=853950
Tried JM8 , JH2 , JH9 .... all of these didnt work ... any other ideas ?????
JH2 seems to take me to recovery mode after flashing, and then when i wipe all data and reboot , it gets stuck on the big S ... this is gettin on my nerves now
I can get it to recovery mode after flashing but i always get the error Cant mount sdcard...
any suggestions ?? does this mean my sd card is done ?
i had the same problem and here is how i fix'ed it:
i made a jig tool like you and got it into download mode then installed I9000XWJM8
useing odin. you can download it from samfirmware.com.
and while the phone was boting up i used adb.
while the phone is booting up try adb shell
if you get into the shell type "reboot recovery"
and install Clockworkmod from clockworkmod install a new firmware.
hope that works
it did for me.
zanderdk said:
i had the same problem and here is how i fix'ed it:
i made a jig tool like you and got it into download mode then installed I9000XWJM8
useing odin. you can download it from samfirmware.com.
and while the phone was boting up i used adb.
while the phone is booting up try adb shell
if you get into the shell type "reboot recovery"
and install Clockworkmod from clockworkmod install a new firmware.
hope that works
it did for me.
Click to expand...
Click to collapse
umm when exactly do i goto adb recovery mode ? when odin is finished with flashing and my phone goes to recovery ? and do i install clockworkmod frm adb then ???
and when in recovery mode it gives me the error .. : cant mount sdcard ... were u having the same problem ???
Your internal SD might be corrupt if you can get in to recovery after you flash and it gives you a error message it might be. If it is, it needs to be fixed by bell.
good luck
hi friend, today i flashed darkeys rom 9.3 but it was not working properly so i restor to 9.2 through cwm recovery but unable to restore. i also tried few other backups i have but none worked. My phone go through restoring backup, and finished with unable to restore. i am on dakreys 9.3 with speedmod karnel withe legfix enable, one more thing when i tried to disable legfix it says could not open lagfix.conf. Please help what to do still 3 botton recovery and download mode is working, should i flash stoke version usin odin? please help and thanks in adv.
Apart from the sensible option of asking the rom developer you can wipe the phone and flash back to stock using Odin if that fails go back to Eclair .
jje
If you followed the instructions to flash darkys rom properly then everything works fine. try again following step by step correctly
Hi, I have searched the threads and found similar problems but no solution appears to work for me.
I took delivery of my GT-P1000 UK model today and everything wise fine, rooted OK until I installed Clockwork Mod's Euro backup from the market. I let the euro reboot the tab and perform a nandriod backup that backed up Ok and verified but the tab would not reboot after that - only the Samsung boot screen and no recovery mode via the power and vol+ buttons.
I flashed the euro firmware pit, PDA P1000XWJMI, modem and phone but still no joy just the boot screen or download options. I do not know what my original firmware version was so I just chose the latest 2.2 available in this forum (P1000XWJMI).
I am pretty much stuck at the moment and would appreciate some help to get my tab back into working order with the stock froyo 2.2 Uk 3G+WiFi firmware.
Also tried firmware P1000XWJMG but still no joy :-(
Cheers
Tony
why don't you flash Overcome Gingerbread , with their new kernel .. it will be a good idea. http://overcome.mimzo.com/ they got the guides so it will be easy for ya
or
if you wanna back to stock rom , go and flash gingerbread stock rom http://forum.xda-developers.com/showthread.php?t=1073854 . hit the thanks button if i helped u
k0sh said:
why don't you flash Overcome Gingerbread , with their new kernel .. it will be a good idea. http://overcome.mimzo.com/ they got the guides so it will be easy for ya
or
if you wanna back to stock rom , go and flash gingerbread stock rom http://forum.xda-developers.com/showthread.php?t=1073854 . hit the thanks button if i helped u
Click to expand...
Click to collapse
Thanks for the pointers but I tried both methods and they failed to work. Overcome failed to flash via odin and Stock Gingerbread installed OK butfailed during recovery:
Upon installing update assert failed: getprop("ro.product.device") == GT-P1000 and so on for each GT model and then Error in /cache/recovery/sec_csc.zip (status 7).
The wipe cache fails with E:format_volume: rfs format failed on /dev/block/stl11 the wipe data/factory reset also failed on /dev/block/mmcblk02p , stl10 and stl11.
I am no expert but it seems that my filesystems are read only following the attempted ext4 conversion by the Euro clockwork recovery app yesterday. I have tried to flash at least 10 different firmwares but all fail to boot I am beginning to think that I have a brick and should return to Samsung service centre...
Tony
if your tab still can on and go through download mode is not bricked ...
what you need is pit and stock froyo to get back your SDcard .. after you do this step u can flash the gingerbread , this problem happened to me from 2days back , i flashed back to rotohammer rom then i flashed gingerbread , and got no more Error msg like you got up there ...
k0sh said:
if your tab still can on and go through download mode is not bricked ...
what you need is pit and stock froyo to get back your SDcard .. after you do this step u can flash the gingerbread , this problem happened to me from 2days back , i flashed back to rotohammer rom then i flashed gingerbread , and got no more Error msg like you got up there ...
Click to expand...
Click to collapse
Thanks tried the pit and stock froyo but still the same problem. Also no recovery menu is available with the stock froyo. I dont know what original firmware was on the tab so I just selected the latest Euro from the list, also tried Asian and Arabic but same problem.
dude , i'm going out now , Friday night ..
so if you like , later , pm me with ur skype and i'll follow your steps and try to help you out .. see ya
k0sh said:
dude , i'm going out now , Friday night ..
so if you like , later , pm me with ur skype and i'll follow your steps and try to help you out .. see ya
Click to expand...
Click to collapse
Thanks a lot - enjoy your evening
I know this is an old thread but what was the outcome?
My problem briefly :
my phone was Not rooted
i've installed (hardcore-speedmod-i9000) zImage via heimdall-frontend app.
now my phone run the download-mode (but i don't know what i can do to it) and it doesn't run into the ClockworkMod Recovery ... and doesn't run into the normal operating mode .. just the plain black Samsung Galaxy I9000 screen ....
i tried Pwr+VolDwn for 10 sec. nothing ..
can someone here help me please ...
files downloaded are from CyanogenMod wiki official website
my only problem is i found lately that i need my phone rooted ...
i'd appreciate it if someone helps me here
Odin flashed to stock JVT, after which to kernel Semaphore JVT 1.8.2
Now, phone is Rooted!
Next dl Rom Manager from market (Recommended to buy premium, show support)
Flash Cwm Recovery 3.x.x.x, choose Samsung GalaxyS i9000(MTD)
DL rom, choose cm7.1 stable ...wipe everything and flash...
thanks a lot man i'm now using cyanogen 7.1 and my phone is working i thought it is bricked and must have it repaired in a store or something
Hello ,
i had flashed the cwm to my phone over gingerbread stock , and installed the cm10.1 ( recommended from here ) , and i parted the phone away for about 2 months , when i got it back , i tried to re-install the original firmware so i opened the odin and rebooted my phone into download mode ,but as soon as i connected it with my pc the odin couldn't read it and the system shows me that the device failed enumeration !! , i have trid changing the rom and installed cm7 but still the same error exist when connected to pc in download mode ! , what should i do i have the odin files , and firmware files , and my cwm version is 4.0.0.5 ( device now running on cm7 )
thanks for your consideration