Database Develop

[Q] Stuck with Root

I got a Samsung Galaxy S about a week ago . Since then I decided to do the typical me thing and see what I can do with it's insides... (stupid move). I Super-One Clicked my phone to root, OCLF'd, and then almost bricked my phone with Galaxy S Tweaker (should have read the reviews).
I was almost crying when I couldn't get my phone to boot, but I jumped online at 2 a.m. and found this website and odin. Since then I have flashed my phone a ridiculous amount of times, but always encounter the same problem.
No matter what firmware I flash to it always says ROOT at SE-S604 #7. I can't actually use Super User or OCLF, it just says that it's rooted...
Am I flashing to rooted firmwares, am I doing something wrong...
Any help is appreciated.
Step by step instructions are prefered as I am a noob...

I apologise, this is in the wrong sub... could a moderator move it to Q&A if possible?

Stock firmware is never rooted. The one you see in the About Phone is just an ID.
You will still need to go through the rooting process, CF root is using odin to flash. You can try that. Select the file for youe rom model.
Sent from my GT-I9000 using XDA App

g00ndu said:
Stock firmware is never rooted. The one you see in the About Phone is just an ID.
Click to expand...
Click to collapse
I can confirm that my completely untouched SGS says root in the about phone menu

since you OCLF'd your device, i believe you did not revert it back before flashing right? Your partition is messed up, thats why it wont boot...
When using Odin, use a 512pit file and repartition to move that lagfix out of there..
EDIT: Nevermind, read your post wrong (to fast) :-S

Kpkpkpkp said:
I can confirm that my completely untouched SGS says root in the about phone menu
Click to expand...
Click to collapse
That root is under the Kernel section am i right?
Pay no attention to it, i myself have no idea why the stock kernel has the word root in it but it really does not mean anything.

So then from what I understand, my phone is not rooted, it just says that it is...
Why am I struggling with Super-One Click then? Why does it cycle?
P.S. lol at whose ever idea it was to include [email protected] on a non rooted phone.

[Q] Seems like I have the first bricked note 3

So I was messing with the system permissions in Es file exolorer, when I accidently set everyrhing to 666. As soon as I hit back I knew I was done for. I started getting foce closes on everything. I reset the phone hoping I could factory reset and be ok; but it keeps looping back to recovery when I turn it on. Im not home/in front a computer right now....but it seems my only hope is odin with the root files. I havent been able to find a stock rom for this phone. Att sucks for locking the bootloader. I will be donating to the bounty when I get in the house.
Anyone have any suggestions or know where a stock rom is oosted?

hawk915402 said:
So I was messing with the system permissions in Es file exolorer, when I accidently set everyrhing to 666. As soon as I hit back I knew I was done for. I started getting foce closes on everything. I reset the phone hoping I could factory reset and be ok; but it keeps looping back to recovery when I turn it on. Im not home/in front a computer right now....but it seems my only hope is odin with the root files. I havent been able to find a stock rom for this phone. Att sucks for locking the bootloader. I will be donating to the bounty when I get in the house.
Anyone have any suggestions or know where a stock rom is oosted?
Click to expand...
Click to collapse
go to root de la vega site, and download the root. there is an odin image there to restore you to stock. you are ok.

thanks
Thanks a lot. Finally home will try right now

NO GO
Ok so the root de la vega seems to have been taken down since there is a new method. And I cant find the firmware for our phones,
What will happen if I try to load a tmobile firmware to the phone?
At this point I think I have a brick and might try it.

hawk915402 said:
Ok so the root de la vega seems to have been taken down since there is a new method. And I cant find the firmware for our phones,
What will happen if I try to load a tmobile firmware to the phone?
At this point I think I have a brick and might try it.
Click to expand...
Click to collapse
I sent you a PM. Check it quickly!
kraz

Back up
krazman325 said:
I sent you a PM. Check it quickly!
kraz
Click to expand...
Click to collapse
Thanks for the help guys. Im up and running again.

First? No.
I bricked my phone well over 10 times already since the day got it. (Damn you framework-res.apk and androidpolicy.jar )
It's all part of the fun! Glad to hear you're back up and running.
Sent from my SAMSUNG-SM-N900A using Tapatalk

Bricked
Well, I've done it too, but mine brick is probably worse. I updated with OTA update, then attempted to root so I tried flashing the Odin inside the Vega package, just to find out the OTA patched the "holes", now I'm stuck at the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So I tried the One Click from the Vega package, but it doesn't do it, it fails with write protect error.
Kies don't have emergency recovery either, and won't even recognize the device.
I'm thinking I have to wait for the actual updated one click comes out to fix it.
Please be warned, DON'T try it

ebaul said:
Well, I've done it too, but mine brick is probably worse. I updated with OTA update, then attempted to root so I tried flashing the Odin inside the Vega package, just to find out the OTA patched the "holes", now I'm stuck at the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So I tried the One Click from the Vega package, but it doesn't do it, it fails with write protect error.
Kies don't have emergency recovery either, and won't even recognize the device.
I'm thinking I have to wait for the actual updated one click comes out to fix it.
Please be warned, DON'T try it
Click to expand...
Click to collapse
There are quite a few of us in that situation. There are a number of people working on it. Hopefully something will come up soon. I wish AT&T would actually release official firmware for our phone through Kies. Would make the recovery process so much faster than having to wait for people to rip MJ5 and re-package it.

i get a black screen....Help
i went ahead and rooted with kingo and deleted some stuff in the system/app folder and now after reboot i get com.google.process.gapps, dropbox, setup wizard and chaton [ unfortunately process has stop ] and it goes into a reboot loop, i can stop the reboot loop when i reroot with kingo but then all i get is a black screen with no apps, launcher, no access to any applications other than the systems settings. Pls help...

fuuhhhh!!!
Me too - figured I'd wait a week before rooting, didn't even bothering to check xda, my bible on such matters, and her I am thinking I know better.
... neeeds me phooooooneeee!!!!!!!!

Need Stock Firmware G900AUCU2AND3!!!

I need the Stock Firmware version G900AUCU2AND3 So that I can flash back to stock. In the thread return to stock it has the previous version G900AUCU1ANCE. I get a error when trying to odin back (SW REV CHECK FAIL : [about]Fused 2 > Binary 1). So I am not sure how its done but need someone who has it do a dump or how ever its done to get it in a way that it can be flashed either by odin or in recovery... Any help will be appreciated... Thanks

i will need this too, i have my phone on at&t next and after a year i can trade it in, but if its custom os and stuff i cant return it, so i will need this too if i want to return to stock so i can upgrade to a new phone next year.

Bump: This is needed very badly. As I imagine many people had to take that bloat ware update. If anyone that has this firm ware has a problem and needs to restore back to stock. They won't be able to use the one that's listed in on this forum as its the older one, and now that there is Root. Its very likely this will happen daily that people will need it. I don't know exactly what soft bricked my phone so it can happen to anyone. My phone was fine until a reboot. Please, please, please. I'm begging everyone that has it. I asked Samsung and they wouldn't help. Next maybe going to AT&T store and having warranty claim done. I don't really want to find the out come of that.

I need this very badly as well. I rooted my phone and then tried to alter my screen density via an app I found on Google Play. It requested root, I granted the permission and then when the phone rebooted it hung on "Samsung Galaxy S5" splash screen and will no go any further. ODIN will not allow me to flash G900AUCU1ANCE firmware since I did the OTA update. If anyone could post up their G900AUCU2AND3, I would appreciate it very much.

kwikrat said:
I need this very badly as well. I rooted my phone and then tried to alter my screen density via an app I found on Google Play. It requested root, I granted the permission and then when the phone rebooted it hung on "Samsung Galaxy S5" splash screen and will no go any further. ODIN will not allow me to flash G900AUCU1ANCE firmware since I did the OTA update. If anyone could post up their G900AUCU2AND3, I would appreciate it very much.
Click to expand...
Click to collapse
I estimate we will get @ least One to two of these per-day until we get the files. Since we now have Root. It may take a bit as At&t version don't seem to have much for devs. Or ones that care to really help.(I'll probably get reamed for this. Sorry for you that help and for your time) I contacted At&t they told me they could not help but I could send my phone in for warranty exchange. Its that or go to BestBuy and they can flash it back. I don't have a Bestbuy Nearby.

Guys, check that post. Shortydoggg found a temporary fix for any soft bricks. It's for extreme cases. My phone is fine (apart from some deleted stock apps) so I'll hold off until i get some more info but if you cant boot at all, his method should come in handy.
http://forum.xda-developers.com/showthread.php?t=2785185&goto=newpost

+1 :highfive:

NotDavid said:
Guys, check that post. Shortydoggg found a temporary fix for any soft bricks. It's for extreme cases. My phone is fine (apart from some deleted stock apps) so I'll hold off until i get some more info but if you cant boot at all, his method should come in handy.
http://forum.xda-developers.com/showthread.php?t=2785185&goto=newpost
Click to expand...
Click to collapse
Thank you. The above link solved my problem. I am back up and running! At first data wasn't working other than wi-fi but I merely had to re-enter my APN that I got from here: http://forum.xda-developers.com/showthread.php?t=2746380 :good:

can you update to G900AUCU2AND3 after flashing this?

dave1977nj said:
can you update to G900AUCU2AND3 after flashing this?
Click to expand...
Click to collapse
YUP, I did the AT&T update check and got it immediately afterwards. I instead of flashing every one separately and rebooting loaded the three files so minus the Bl file. I did not have the problems of having to reload APN this way.

pcidiot said:
YUP, I did the AT&T update check and got it immediately afterwards. I instead of flashing every one separately and rebooting loaded the three files so minus the Bl file. I did not have the problems of having to reload APN this way.
Click to expand...
Click to collapse
Thanks!!! :good:

pcidiot said:
YUP, I did the AT&T update check and got it immediately afterwards. I instead of flashing every one separately and rebooting loaded the three files so minus the Bl file. I did not have the problems of having to reload APN this way.
Click to expand...
Click to collapse
A flash of the CSC file restores the APN after flashing the AP file, or flashing it together with the AP file, but it factory resets the phone. Flashing the AP file only is mostly for those who do not want a factory reset. But, a factory reset along with flashing only the AP file will indeed wipe the APN. I found all of that out through trial and error.

shortydoggg said:
A flash of the CSC file restores the APN after flashing the AP file, or flashing it together with the AP file, but it factory resets the phone. Flashing the AP file only is mostly for those who do not want a factory reset. But, a factory reset along with flashing only the AP file will indeed wipe the APN. I found all of that out through trial and error.
Click to expand...
Click to collapse
Thanks for your trials this will be useful to many.

pcidiot said:
Thanks for your trials this will be useful to many.
Click to expand...
Click to collapse
No problem.

dave1977nj said:
can you update to G900AUCU2AND3 after flashing this?
Click to expand...
Click to collapse
Yes do not root first, flash it then wait a few minutes then do a check for updates it will download the crap update with the yp yellow pages app,
then reboot and root
and take it away !!

pcidiot said:
Bump: This is needed very badly. As I imagine many people had to take that bloat ware update. If anyone that has this firm ware has a problem and needs to restore back to stock. They won't be able to use the one that's listed in on this forum as its the older one, and now that there is Root. Its very likely this will happen daily that people will need it. I don't know exactly what soft bricked my phone so it can happen to anyone. My phone was fine until a reboot. Please, please, please. I'm begging everyone that has it. I asked Samsung and they wouldn't help. Next maybe going to AT&T store and having warranty claim done. I don't really want to find the out come of that.
Click to expand...
Click to collapse
Same troubles here pcidiot!!!! soft bricked and nothing will load onto the phone. ODIN gives me the same kind of error as listed on the starting thread! I can get to recovery mode and Download (ODIN) mode on the phone but nothing wants to flash. Do we dump? Do we Erase Nand? CONFUSING!!! why is it so easy to bunk up a phone!

Achilles5410 said:
Same troubles here pcidiot!!!! soft bricked and nothing will load onto the phone. ODIN gives me the same kind of error as listed on the starting thread! I can get to recovery mode and Download (ODIN) mode on the phone but nothing wants to flash. Do we dump? Do we Erase Nand? CONFUSING!!! why is it so easy to bunk up a phone!
Click to expand...
Click to collapse
There should only be two boxes checked in odin thats f. reset time and auto reboot. Also Make sure you only check and load your firmware in the ap slot in odin. Now flash.

Achilles5410 said:
Same troubles here pcidiot!!!! soft bricked and nothing will load onto the phone. ODIN gives me the same kind of error as listed on the starting thread! I can get to recovery mode and Download (ODIN) mode on the phone but nothing wants to flash. Do we dump? Do we Erase Nand? CONFUSING!!! why is it so easy to bunk up a phone!
Click to expand...
Click to collapse
Are you following this guide?
http://forum.xda-developers.com/showpost.php?p=53454972&postcount=1

shortydoggg said:
Are you following this guide?
http://forum.xda-developers.com/showpost.php?p=53454972&postcount=1
Click to expand...
Click to collapse
Yea I did thank you. Did it today and thanked the poster too.

Want to start over! Need help!
So I want to do whats written out in step 4 of shorttydogs thread but I don't want to mess up or brick my phone. My goal is to start over and go back to stock with bloatware and everything that is available on stock if I were to go AT&T and buy it today. Here is a little background on my phone. My phone is rooted and I do have safestrap (and busybox). I backed up everything on my microSD card. I also have the g900AUCU2AND3 firmware on my phone. In addition, I deleted some but not all AT&T bloatware, which I want back. Lastly, for some reason the "add call button" during my calls is missing and was replaced with a "record" button I think this was because of me playing around with xposed. I deleted xposed framework as well as wanam and tried everything to get the "add call button" back but I couldn't. Thus, I just want to go back to stock to fix all these issues. I just have a few questions before I proceed just to make sure I'm not doing anything wrong.
1) If I flash the AP, CP and CSC files will I achieve 100% stock with bloatware?
2) Will this return my "add call button"?
3) Is it as simple as just using odin 3.09 and flashing the AP, CP, and CSC files?
4) I also understand that this will take me back to G900AUCU1ANCE but will I be able to do an OTA do go to G900AUCU2AND3?
5) Is there anything else I need to know to prevent my phone from bricking!
Sorry for the long post but I am fairly new to this stuff and don't want mess anything up!

Successful Unroot Options

I am returning my phone back to stock so I can trade it in. I found a few threads on here that have ways to unroot but some seem questionable. Can anyone point me in the right direction to unroot an official Kit Kat updated device?
Thanks

Assuming you have supersu, uninstall all of your apps that have root access (for safestrap, busybox, etc make sure to uninstall the in-app stuff first), i would reboot here but that may not be necessary...then open up supersu and choose "full unroot". Then factory reset and double check status is official ☺
If you get a custom screen after that try rerooting then full unroot with supersu again
Edit: I stand corrected - flashing NC2 with Odin is easiest

Yeah I have su. So before I do this should I restore my stock rom I have backed up via safestrap? I am currently running dynamic kat 5.0

You can also reinstall factory firmware with Odin, then factory reset.
http://forum.xda-developers.com/showthread.php?t=2703006

Awesome, I will give that a try when my upgrade is closer. Thank you

440bro said:
You can also reinstall factory firmware with Odin, then factory reset.
http://forum.xda-developers.com/showthread.php?t=2703006
Click to expand...
Click to collapse
konaman said:
Awesome, I will give that a try when my upgrade is closer. Thank you
Click to expand...
Click to collapse
Yea @440bro 's suggestion is way easier since Odin removes all of that! unroot with SuperSU does work but it's a long way around for just returning to stock

please help
440bro said:
You can also reinstall factory firmware with Odin, then factory reset.
http://forum.xda-developers.com/showthread.php?t=2703006[/QUOTE
]I have similar situation except I have an iMac running OS X Mavericks. Could anyone tell me if it's possible to unroot my AT&T Note 3 to stock ROM to sell? I installed stock custom rom using safestrap but when I reboot or turn device on, I get a safestrap enabled cartoon thing asking to continue or recover. I don't think people will want to buy phone if they saw this sick looking robot thing when they switch it on. Please help...Phone too big for my hands. Thank you
Click to expand...
Click to collapse

braddy66 said:
440bro said:
You can also reinstall factory firmware with Odin, then factory reset.
http://forum.xda-developers.com/showthread.php?t=2703006[/QUOTE
]I have similar situation except I have an iMac running OS X Mavericks. Could anyone tell me if it's possible to unroot my AT&T Note 3 to stock ROM to sell? I installed stock custom rom using safestrap but when I reboot or turn device on, I get a safestrap enabled cartoon thing asking to continue or recover. I don't think people will want to buy phone if they saw this sick looking robot thing when they switch it on. Please help...Phone too big for my hands. Thank you
Click to expand...
Click to collapse
Did you backup stock rom before you flashed the custom rom in safestrap? if yes, reflash your backup in safestrap then the steps in post #2 should work. If no, I'm really not sure how going through that unroot process with SuperSU while still on a custom rom would work out...Odin is much easier and more reliable so if there's any way you can get to a PC you might want to go that route.
Also if you're selling online you might find some people who do want to buy a rooted Note 3...I sold a phone on swappa a few months ago and there were people looking specifically for rooted phones. The 'cartoon thing' is safestrap and is exactly what you want to see when you turn on a rooted AT&T Note 3
Click to expand...
Click to collapse

thank you
braddy66 said:
440bro said:
You can also reinstall factory firmware with Odin, then factory reset.
http://forum.xda-developers.com/showthread.php?t=2703006[/QUOTE
]I have similar situation except I have an iMac running OS X Mavericks. Could anyone tell me if it's possible to unroot my AT&T Note 3 to stock ROM to sell? I installed stock custom rom using safestrap but when I reboot or turn device on, I get a safestrap enabled cartoon thing asking to continue or recover. I don't think people will want to buy phone if they saw this sick looking robot thing when they switch it on. Please help...Phone too big for my hands. Thank you
Click to expand...
Click to collapse
brisinger08 said:
braddy66 said:
Did you backup stock rom before you flashed the custom rom in safestrap? if yes, reflash your backup in safestrap then the steps in post #2 should work. If no, I'm really not sure how going through that unroot process with SuperSU while still on a custom rom would work out...Odin is much easier and more reliable so if there's any way you can get to a PC you might want to go that route.
Also if you're selling online you might find some people who do want to buy a rooted Note 3...I sold a phone on swappa a few months ago and there were people looking specifically for rooted phones. The 'cartoon thing' is safestrap and is exactly what you want to see when you turn on a rooted AT&T Note 3
Click to expand...
Click to collapse
Thanks for your feel good message...made my day. I thought I backed up stock rom however being an obviously root virgin...When I went to factory reset, everything was gone except for my ugly cartoony friend. Luckily I am able to read in small doses so I was able to do whatever it was I did to get her running factory...still rooted and unlocked. When you mentioned that people on swappa might be interested in a rooted device WITH my lonely friend at startup? I felt all fuzzy. I will post an ad on swappa later today in your honor my mysterious phoneguardian angel. Thanks again.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Looks like I'll need to go the long route to unroot. I have a Mac book and I can't find Odin for it

[Q] Can you help me get my Recovery Menu back and possibly Stock FW

Okay so to start I followed this Tutorial http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 all the way through and my phone was rooted and I was happy. One day I tried to install TWRP since this is what I used on my Galaxy s3 before this phone. It got stuck on on a boot loop. I eventually tried flashing every stock ROM which did not fix the problem because ODIN would fail when trying to flash. Eventually I tried flashing the "G900A_ND3_Stock_Kernel" supplied in the tutorial. My phone magically booted up and all my APPS and stuff was the same as I left it and it was still rooted. I decided not to mess with it anymore. This happened about a month ago.
Today, my phone had a notification saying that there was an update and I tapped remind me later. Eventually, I installed Titanium Back up to force closed the AT&T Software Update app the phone came with. Then. it automatically updated and eventually got stuck into the boot loop again. No problem, I fixed this before. What I noticed from the first time was that I had a screen that said "Secure Fail: Recovery. System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help" Once I flashed the stock kernel from the tutorial I never checked to see if the recover menu was there.
So right now I have my phone working and its rooted. I installed the "Phone Info" app and it says Bootloader Version:G900AUCU2ANG3. Eventually, my phone will try to update itself again and it will fail causing it to boot loop. I am not sure on what to do. Is there a way for me to have my recovery menu back? I just want to have the option in the future to revert everything back to normal in case I sell it or feel like having the newest OS. Also it would be cool to have a recovery menu on my phone again.
I know this was long but I needed to solve this problem before it gets out of hand in the future. Also I am pretty sure others have followed the tutorial and might have had the idea to update the OS or something else and had a problem similar to mine.
Thank You Very Much.

xtremegamer13 said:
Okay so to start I followed this Tutorial http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 all the way through and my phone was rooted and I was happy. One day I tried to install TWRP since this is what I used on my Galaxy s3 before this phone. It got stuck on on a boot loop. I eventually tried flashing every stock ROM which did not fix the problem because ODIN would fail when trying to flash. Eventually I tried flashing the "G900A_ND3_Stock_Kernel" supplied in the tutorial. My phone magically booted up and all my APPS and stuff was the same as I left it and it was still rooted. I decided not to mess with it anymore. This happened about a month ago.
Today, my phone had a notification saying that there was an update and I tapped remind me later. Eventually, I installed Titanium Back up to force closed the AT&T Software Update app the phone came with. Then. it automatically updated and eventually got stuck into the boot loop again. No problem, I fixed this before. What I noticed from the first time was that I had a screen that said "Secure Fail: Recovery. System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help" Once I flashed the stock kernel from the tutorial I never checked to see if the recover menu was there.
So right now I have my phone working and its rooted. I installed the "Phone Info" app and it says Bootloader Version:G900AUCU2ANG3. Eventually, my phone will try to update itself again and it will fail causing it to boot loop. I am not sure on what to do. Is there a way for me to have my recovery menu back? I just want to have the option in the future to revert everything back to normal in case I sell it or feel like having the newest OS. Also it would be cool to have a recovery menu on my phone again.
I know this was long but I needed to solve this problem before it gets out of hand in the future. Also I am pretty sure others have followed the tutorial and might have had the idea to update the OS or something else and had a problem similar to mine.
Thank You Very Much.
Click to expand...
Click to collapse
So you're still rooted?
And if so using titanium backup just freeze the ATT update app I forget what it's called exactly but you'll know it when you see it and that'll stop your device from trying to automatically trying to update

OPOfreak said:
So you're still rooted?
And if so using titanium backup just freeze the ATT update app I forget what it's called exactly but you'll know it when you see it and that'll stop your device from trying to automatically trying to update
Click to expand...
Click to collapse
Yeah I'm still rooted and I found out about the freeze app option but do you know about the problem where I don't even have a recovery menu?

xtremegamer13 said:
Yeah I'm still rooted and I found out about the freeze app option but do you know about the problem where I don't even have a recovery menu?
Click to expand...
Click to collapse
You need to download the safe strap recovery menu. That is for rooted phones with locked bootloaders.

dirtydodge said:
You need to download the safe strap recovery menu. That is for rooted phones with locked bootloaders.
Click to expand...
Click to collapse
Thank You very much I was able to install the Safe strap Recovery and am now backing it up. Hopefully my last question Is there a way to update in the future for example if I wanted to have the OTA firmwares from AT&T without root in case I were to sell the phone?
Thank you guys for the answers.

xtremegamer13 said:
Thank You very much I was able to install the Safe strap Recovery and am now backing it up. Hopefully my last question Is there a way to update in the future for example if I wanted to have the OTA firmwares from AT&T without root in case I were to sell the phone?
Thank you guys for the answers.
Click to expand...
Click to collapse
Odin back to stock

OPOfreak said:
Odin back to stock
Click to expand...
Click to collapse
I've tried this in the past when my phone was stuck in bootloop, But it always failed since I have a different baseband or boatloader. Would you know which stock ROM I have to use because I tried many and had no luck in the past?

xtremegamer13 said:
I've tried this in the past when my phone was stuck in bootloop, But it always failed since I have a different baseband or boatloader. Would you know which stock ROM I have to use because I tried many and had no luck in the past?
Click to expand...
Click to collapse
Read here links are still working
http://forum.xda-developers.com/showthread.php?t=2868776

OPOfreak said:
Read here links are still working
http://forum.xda-developers.com/showthread.php?t=2868776
Click to expand...
Click to collapse
Wait, the thread is for Galaxy s5 Active. Will the G870AUCU1ANE4_Full_Odin.tar file work on my Galaxy s5 AT&T? Just making sure.

xtremegamer13 said:
Wait, the thread is for Galaxy s5 Active. Will the G870AUCU1ANE4_Full_Odin.tar file work on my Galaxy s5 AT&T? Just making sure.
Click to expand...
Click to collapse
No my bad
Here
http://forum.xda-developers.com/showthread.php?t=2862299