Stucked on boot screen (the one that we usually see first with white letters). I did factory reset but I am still stucked on Galaxy S boot screen. I heard the default galaxy S sound but did not see the big 'S'. When I press Volume down + Home + Power , I just see a big triangle which says 'Downloading...do not turn off target'. This means that I can go into the download mode.
I installed odin3 and installed .512 PIT file as well as JH2 firmware from samsung-firmwares website. Inside the JH2 zip file I see a file with extension .tar (I think this goes in PDA section of ODIN).
After connecting my phone with my computer, I see 0:[COM6] in Odin. Plz guide me from hereon. Any help will be much appreciated.
NOTE: I was using gscript o change system fonts. Probably deleted system fonts. Then, I restored back to system and since then phone would not start. Well, it starts but I am stucked on this screen.
I am using Samsung galaxy S vibrant (Bell, canada [GT-I900M])
I will not help because you didn't ask the right question. Please change the title of your thread to something more intelligible or no one will bother.
Bec07 said:
I will not help because you didn't ask the right question. Please change the title of your thread to something more intelligible or no one will bother.
Click to expand...
Click to collapse
Sorry...I will change now
...
Try the same combo but with volume up. Why do you want to connect to kies?
Bec07 said:
...
Try the same combo but with volume up. Why do you want to connect to kies?
Click to expand...
Click to collapse
I am trying to connect to KIES because I think i can reflash using test mode.
Yes..I tried that? Did wipe/factory reset..then rebooted....got the same screen again.
Thanks for replying
EDIT: when I go to recovery menu (Volume up + home + power) and then connect with USB...I can see my device listed by using 'adb devices' command in the cmd prompt.
OK....When I connect my phone to my computer via USB, I can see 0:[COM6] in ODIN. I can go into download mode. I have downloaded JH2 firmware (zip file from samsung-firmwares website). I have Bell Samsung galaxy S vibrant. Can I flash with ODIN.
hay buddy i had exact same problem and this post saved my life... here it is hopfully it will help u out if it does let me know
http://forum.xda-developers.com/showthread.php?t=984140
I tried to update my SGS to android 2.2 through kies wihtout puting my phone in to recovery mode. The firmware seems to be lost and the device cannot boot only give me a black screen with word samsung galaxy s GT I9000 wrote on it.
Iam very new in android devices please help me. I do not know what I should to do..
Mine did the same thing when I flashed with Kies.
Try this: Hold Volume UP, Home button and on/off button together until a screen with a few options appears. Select Wipe/factory reset from the list using the volume up/down button. Select ok and reboot. You will loose all your data but your phone will work again.
aviatorshar3an said:
I tried to update my SGS to android 2.2 through kies wihtout puting my phone in to recovery mode. The firmware seems to be lost and the device cannot boot only give me a black screen with word samsung galaxy s GT I9000 wrote on it.
Iam very new in android devices please help me. I do not know what I should to do..
Click to expand...
Click to collapse
BTW You did the upgrade the right way. With Kies you don't need to go into recovery or download mode before flashing. Follow the previous posters instructions and if that doesn't work you'll need to search around here more, for other flashing methods or just to find out if your internal sdcard is dead.
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
dai123 said:
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
Click to expand...
Click to collapse
Is it possible you flashed the wrong FW? After flashing was the tab able to reboot?
Try wiping cache and do a factory reset. Volume-up+powerbutton. You will see in the middle of the screen a little triangle. Then push the volume-up button again. Then you will be in the recovery-mode. There choose wipe/cache and the wipe-data/factoryreset.
If that not helps try flashing another FW. The Rot-hammer i.e.
Fixed it!
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Question
dai123 said:
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Click to expand...
Click to collapse
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
unanony said:
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
Click to expand...
Click to collapse
please tell me what firmware you flashed...please im stuck and depending on what firmware i flash i can hear it start but still blank screen
Same black screen
I can get Odin to recognize my tab, windows 7 can see it and I can flash to it, but the screen is black all the time.
Has anyone had any luck?
What do samsung use to fix this? I've seen a repair/service program from ZTE for some of their devices that I believe was procured from an employee of ZTE. Maybe there is something like that around?
<edit>
I also flashed a rom from samfirmware, so I guess the issue is a locked bootloader from a stock rom. Anyone know how to fix this?
I too am having this issue with sawfiremware image.
i can can tell i am in download mode but i am unable to flash the EA24 firmware.
Anything that can be done?
Thank you!!
My Tab's screen won't turn on at all, even when plug-in, even that Odin said that flash was successful. But after connecting it to PC with Odin opened (Odin recognized it), loaded all files needed for flash in Odin, I pressed HOME+Volume Down + Power, the device auto-dismounted from PC, and reconnected again, I pressed start in Odin and after finishing updating firmware, the screen was working again.
Good luck to everybody! I'm happy now
what firmware did you use? thx
HELP
hello guys i have the same problem can you please help me out on how to fix it?? my screen is black and i only have the 4 white buttons up, please i need some serious assistence
Blank Screen after installing firmware same firmware
hey guys, could you lend me some help here , my tablet is samsung galaxy tab 7.0 Plus , i installed android 4.12 jelly bean , but it was 3.2 honeycomb before i upgraded to 4.12 jelly bean ,well , i'm proud of it , its smoother then the honeycomb but after a few months , my tablet suddenly just displaying a samsung logo for .... forever .. i downloaded the firmware from samsungupdate.com and i probably understand it's because the rom , i flashed the rom using Odin 3,07 with 4.12 jelly bean firmware that for indonesia region , here's the version of the firmware that i flashed to my tablet "P6200XXMD6_P6200OLBMD5_P6200XXMC3_HOME.TAR.MD5 " please note that my tablet can't open/show the recovery system , it just went black when i went to recovery system , soo i just flashed the rom again , it's because the tablet just showing samsung logo forever , never goes to window , and i flashed the rom with similar firmware but not for the indonesia region , the international one , andd after i flashed , it successfully install the same firmware ( 4.12 jelly bean ) well , it's fix the frozen samsung logo , but after it's showed the samsung logo , it just showed a blank screen of dead , the installazation is success but not fixed my tablet , well i still cant open the recovery mode, it's just showed a blank screen just like before i flashed the same firmware , PLEASE help
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
priyana said:
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
wut ?? isn't this the galaxy tab forum ... it thought i can ask a question here , but thanx anyway
Yeah. Galaxy Tab. You know, the 7" original. GT-P1000. Not at galaxy tab.
Sent from my GT-N7100 using XDA Free mobile app
Hello Everyone, I'm from Nepal. I have also same problem after few days. I search in google and YouTube also but not solve my problem. then i use my technical ideas on SM T561 tab, and I'm Shocked its open and working properly. if you also want to do that plz download Miracle Thunder 2.82 and Odin. install Miracle thunder and open, connect your Samsung tab with pc or laptop, on Miracle Thunder choose Samsung button, scan you Samsung port, model> Auto detect, mode > download, then select factory reset and click Go and wait. now your tab download mode then go to Odin and flashing your Samsung tab original firmware from website and flashing your tab. 100% its work. Thank you and sorry for my poor English.
https://www.facebook.com/softktm
Last night I was trying to update my Samsung Galaxy ACE S5830i to Jellybean. And I messed up. I followed the instructions from a forum, which asked me to root the phone by pressing Power+Volume UP+Home Key and then install the Jellybean from the memory card.
I did all that was told step by step I believe. But maybe the Jellybean software was corrupted or I messed up with some step, I don't know. And now the situation is that, there is no Android OS installed on the phone, the phone is stuck on the Samsung Galaxy Ace S5830i Logo, doesn't move further. I cannot even enter in the recovery mode by pressing Power+Volume UP+Home Keys combination. Tried everything from removing battery to SD Card, even waited for hours after pressing the combination for recovery mode. Nothing works
Now I don't know what to do I am not a technical person when it comes to playing with Android.
Any help with step by step explanation in simple words in this regards would be a relief.
Now I don't know what to do I am not a technical person when it comes to playing with Android..
Click to expand...
Click to collapse
Prior to deciding ongoing ahead with making huge alerations to your mobile phones software and functionality...arm yourself with some information!. That being said your phone can be recovered if you have a little patience, and read through the guides on the forums.
RESTORING
Firstly get yourself your mobile phones stock firmware either via http://www.sammobile.com or a programme called Fus Checker Downloader. (Search these forums or use google)
Get yourself a copy of the latest ODIN3 v 3.07 (Search these forums or use google)
Get yourself the SAMSUNG_USB_Driver_for_Mobile_Phones. (Search these forums or use google)
For restoring your original firmware follow this guide on section 3 (http://forum.xda-developers.com/showthread.php?t=1840645)
ROOTING
For rooting follow this guide (http://forum.xda-developers.com/showthread.php?t=1551156)
Good luck and let us know if you encounter any problems.
If you tried to upgrade to Jellybean as in upgrade your version of Android then there is no known way of doing this on an S5830i and you may have installed an update that wasn't intended for your device, therefore bricking it in the process. A link to the instructions that you followed might help.
Whatever the case, you need to try and get your phone into download mode to reflash the original firmware. Press VolumeUp + VolumeDown + Power whilst the phone is switched off. Then press VolumeUp at the warning screen. Does that work? If it does you might be in luck, follow the unbrick tutorial here.
Bro we don't have ics how come jelly bean...u try to install stock rom through download mode using Odin. And later u can install any custom roms u want.
Sent from my Galaxy Ace i using xda premium
i am new member a cant post in developmet so i ask here..
I try to root my samsung galaxy s GT-I9000. I follow instrunction from internet..i do it with odin3 v1.00 and i used CF-Root-JP6-v1.2-Busybox-1.17.1
everything was ok and was sucess....mobile reseted and come to first screen and then he stop..dont wont to turn on just start screen and stop..i tried to reset factory settings again no help...When i press power first screen show and then stoped....i dont know what to do where i do somethnig wrong..pls help me and sorry for my english
Daxx022 said:
i am new member a cant post in developmet so i ask here..
I try to root my samsung galaxy s GT-I9000. I follow instrunction from internet..i do it with odin3 v1.00 and i used CF-Root-JP6-v1.2-Busybox-1.17.1
everything was ok and was sucess....mobile reseted and come to first screen and then he stop..dont wont to turn on just start screen and stop..i tried to reset factory settings again no help...When i press power first screen show and then stoped....i dont know what to do where i do somethnig wrong..pls help me and sorry for my english
Click to expand...
Click to collapse
First using version 1 Odin3, is not ideal for this Device, second you should use CF rooting kernel based on the ROM you had on your Device.
The Best way to do it, follow this and flash the Gingerbread JVU ROM on it and after that the Rooting kernel.
Before doing this, save all your data to your PC first , just use USB storage mode and Copy everything to PC first as flash a ROM would erase all your data
Check this out! Links to useful Guides and " Banned " Documentaries