[Q] Rooted Nook on BN 1.1 Wifi Issues - Nook Color General

Ok, running a rooted (with Autonooter 3.0) and BN ver 1.1.
For some reason, the Nook keeps dropping the wifi connection. I have several other devices, phones, computers, and none of them are dropping the connection. It just tells me obtaining IP and then stops, with connection unsuccessful. No other problems at all, it works great, when it works! Any help is appreciated.

Wrong forum. Post in the General forum next time. Have you searched? Your question may have been asked / answered before. Just checking.

I'd also like to know the answer to this.
My NC works with my wifi at home perfectly, but simply cannot connect to the wifi at my office. Another employee here has an ipad that connects to our wifi just fine...

Tdogg,
I had exact same situation. Nook Color 1.1, autonooter 3.0 and would drop about 5 minutes into using the wifi. Had to restart the wifi all the time so was annoying.
Was hard to track down but I read another forum that the NC wifi does not like WPA/WPA2 AES. I checked my router and I have WPA/WPA2 TKIP and AES set for some reason (this was default on the d-link router). I then changed the setting to TKIP and I don't get any dropouts now.
Hoping this works for you so see how you go.

Zhousibo said:
Tdogg,
I had exact same situation. Nook Color 1.1, autonooter 3.0 and would drop about 5 minutes into using the wifi. Had to restart the wifi all the time so was annoying.
Was hard to track down but I read another forum that the NC wifi does not like WPA/WPA2 AES. I checked my router and I have WPA/WPA2 TKIP and AES set for some reason (this was default on the d-link router). I then changed the setting to TKIP and I don't get any dropouts now.
Click to expand...
Click to collapse
Are you sure? According to this note, changing from TKIP to AES fixed it..
http://forum.xda-developers.com/showpost.php?p=11137046&postcount=15

Rechecked my settings and I have set to TKIP and haven't had a drop since. I got the TKIP tip from here which made me try it:
http://answers.yahoo.com/question/index?qid=20101227165613AAl4TFk
For OP, basically try in the router settings either and see how it goes.

I have a router running Tomato, set to WPA/WPA2 Personal, TKIP. Autonooted B&N 1.1.0.
The wi-fi connection is stable as long as the screen is on. After some number of minutes with the screen off, when I unlock it the wi-fi shows as "unsuccessful" and it does not show my router (or any network at all) in the network list anymore. I end up having to toggle off and on in order to get back on.

From what I have gathered it does vary from router to router, but there are some consistencies to think about.
1) WEP seems to be the best option. I was on TKIP before and went strait to WEP and have had no issues since. I tried AES but some devices wouldn't connect with AES for some reason.
2) A mixed b/g or similar wireless signal from the router seems to cause some conflicts with the NC. If you can switch it to only broadcast G then that might work.

Related

Wifi problems with actiontec Fios router

Anyone else having trouble using the internet over wifi (wep & wpa) with the actiontec router that comes with Verizon fios? I can ping the G1 and telnet into it. Just can't use the browser. I am able to connect to other WPA encrypted routers and everything works great. This problem existed on rc19 and continues on rc30.
Thanks for any help.
aad4321 said:
It worked well with my actiontec, with WPA as well. sounds strange...maybe a router reboot
Click to expand...
Click to collapse
Was the first thing i tried.
I don't have one yet (it is coming December 13th HAHA) But can you two compare firmware versions? Maybe you need to update that... or maybe there is a setting that is preventing the phone from getting to the net. It sounds more like a setting on the router than the phone.
I would check DNS settings and make sure all works well... Can other wifi devices connect to the net?
Same here, 4.0.16.1.56.0.10.7.
Have also tried static and dynamic ip's. My daughters DS and computer are connected via wifi. Next I'll try turning UPnP on.
Thanks for everyone's help.
Edit: UPnP is a no go. I don't want to do a factory reset but, looks like I'm headed that way.
have the same problem
what did you end up doing?
tried it
didnt work...
I have fios myself and the wifi portion of the Actiontec router is craptacular. I've had all sorts of compatibility problems with various wifi cards. I have replaced the primary router with a .N aftermarket one and hooked up the Actiontec as a regular client so the TV cable boxes can still get programming updates. Naturally, I turned off the wifi on the actiontec.
So its basically like this:
Actiontec -> D-Link N (or whatever you want) -> Internet
If you go down this route you just have to make sure whatever router you make your primary is not on the same private network. Actiontec uses 192.168.1.X. I've had no problems since switching to a higher end router. Also, you can clone your mac address from the actiontec or call verizon and have them reset your DHCP lease. They know the drill.
I have FIOS with the newer Westell routers and the wifi sucks on them as well. I got a belkin and use it as a wifi expansion. So it uses the same IP as the router but just adds a wifi network. Pretty neat if you ask me.
so i think may have found a solution that may work for you (it worked perfectly for me). what i did was switch my security to WPA2 and left the encryption standard to AES only as a pose to TKIP+AES. I also reset the router before this but im sure you dont have to do that. let me know if this works.
http://forum.xda-developers.com/showpost.php?p=10035476&postcount=10
neoobs said:
I have FIOS with the newer Westell routers and the wifi sucks on them as well. I got a belkin and use it as a wifi expansion. So it uses the same IP as the router but just adds a wifi network. Pretty neat if you ask me.
Click to expand...
Click to collapse
Could you be kind and give us more details of exactly how you connected and setup the belkin router to improve the wifi? My FiOS wlan also sucks and Verizon tech support is useless.
Thank you.
Oops! Just realized this is a very old thread......

Dummies' Guide to Diagnosing Intermittent Wifi on NC - fixed in BN1.3

This is a compilation of threads found on this forum as well as the BN forum. I thought having it in one place will help.
Edit: problem may be BN NC. See last paragraph
The NC is the first device that I have encountered that had intermittent wifi problems. At home, I have a mixture of Macbooks, iPod, a Viewsonic G Tablet running Android 2.2, desktops running Windows 7 and XP using various brands of USB wireless adapters and have NOT had any problems using 802.11n with WPA2/AES encryption.
From other threads: "As always, everything in this guide is completely at your own risk, I am not responsible for you messing up your device further nor am I responsible in the event that your Nook Color explodes and kills your cat, grandma, etc."
Intermittent Wifi Connection:
This is the issue where your Nook connects to Wifi and then after a few minutes the connection goes away. Typically the NC shows wifi as connected or perhaps connected and testing.
There are five variables that can cause intermittent wifi connections:
-your router
-wifi type 802.11b/g/n
-encrytpion
-wifi frequency 2.4ghz/5ghz
-NC ROM
-NC operating system
In many cases, this is due to 802.11n wifi. A digression: Wifi comes in manner flavors; 802.11b, the first standard; 802.11g, the second; 802.11n the latest standard. These flavors have to do with the physical wireless router.
In addition to the hardware, there are variations in encryption of the wifi signal: WEP, WPA, WPA2 with AES or TKIP. WPA2 with AES is the most secure. Look it up on Wiki for more details. And of course the
OS the NC is running.
In many cases, the NC will NOT connect reliably with 802.11n. I have a Dlink DIR-615 V2 wireless router and when set to 802.11n with WPA2 with AES, the NC connects but after a few minutes goes into a state of "testing connection". Setting the router to 802.11g only fixes the problem. An easy test is to go into Youtube and watch a long video. Most likely, half way through, you will loose the connection.
At work, we have a high end multi-access point Meru networking running unencrypted wifi 802.11n and I have this problem. So this may indicate a driver problem with the NC.
The Fix:
Go into your router's wireless. Select manual setup and find 802.11 mode or something to that effect. On my router, I have a choice of "mixed 802.11n, g, b", "802.11n only", "802.11g" only. Selecting 802.11g only with WPA2/AES fixes it for me.
Interestingly the NETGEAR WNR3500L-100NAS 802.11b/g/n seem to operate reliablely with the NC using 802.11n.
One post indicates that settting encryption to TKIP also fixes the problem.
http://forum.xda-developers.com/show...72&postcount=6
However, using TKIP opens up a hole for hackers
http://en.wikipedia.org/wiki/Tempora...grity_Protocol
One solution on the nookboards and BN forum also suggested turning off 802.11n
http://www.nookboards.com/forum/index.php?topic=5669.0
http://bookclubs.barnesandnoble.com...-Problem-quot/m-p/770856/highlight/true#M3295
If you are having problems, the following information will help in diagnosing the problem:
Router brand and model number: eg: Dlink DIR-615
802.11 mode: b, g, n?
SSID visible?
Encryption: no or if yes: WEP, WPA, WPA2 TKIP/AES\
NC Rom: 1.0.1 or 1.1
NC OS:
I will try to update this guide periodically. Moderators: feel free to delete this thread if it is redundant.
Edit:
BN has acknowledged there is a problem with certain routers. From my own experience, there are many more routers that are incompatible with the NC. My assessment is that it's a driver in the BN. I have a Gtablet running 2.2 with no problems.
http://bookclubs.barnesandnoble.com...ssed/m-p/1030918/message-uid/1030918#U1030918
From BN Administrator: "In general, wifi issues can continue to be fixed by following the troubleshooting guides posted in the FAQ and in other posts. We *are* continuing to investigate reported wifi issues with certain routers that have had issues reported. At this point, we’ve investigated the Belkin F5D8231-4 and found an issue introduced with Android 2.2. We have a fix that will be included in the next release, but do not have a workaround for users. We are also investigating other routers (including the DLink DL- 624 and Westell 327W), but do not currently have a fix for them.
Please continue to post here if you encounter further problems and NOOK_Engineer and I will work together to investigate further."
EDIT 9/7/2011: After I updated to BN1.3 and then rooted with, wifi connects perfectly with 802.11n both at home and work. Work wifi consists of multi-point 802.11n. Note that this is with Dalingren's froyo 9/1/11 kernel with the BN 1.3 source drop.
Thanks for this! Do you have any ideas about intermittent wifi ONLY when on an Adhoc network from my Droid? I had no wifi issues under Rooted 1.1 but when i went to internal Froyo 0.6.6 it is almost unusable. I have upgraded to 0.6.8 and it is still not working correctly, it keeps loosing the IP or pausing the connection.
Done some digging on this, and the issue is that my NC can see either the G or the N channel from my router, but not both (even with different SSID) when G is at 2.4 and N is at 5Ghz. It will only see N on 2.4 Ghz. bah.
I like the idea of putting it all together as it took me awhile to figure it out.
FYI, my wireless modem is:
D-Link DIR-655
On WPA/WPA2 TKIP
Interestingly, I made a setting change to set the wireless mode to only n & g modes. This stopped my nook from getting any wireless till I changed back to n,g & b. Not exactly sure what this means other than it could a router specific issue but good to keep the info in one place considering it is hard to track.
necroscopev said:
Thanks for this! Do you have any ideas about intermittent wifi ONLY when on an Adhoc network from my Droid? I had no wifi issues under Rooted 1.1 but when i went to internal Froyo 0.6.6 it is almost unusable. I have upgraded to 0.6.8 and it is still not working correctly, it keeps loosing the IP or pausing the connection.
Click to expand...
Click to collapse
Not sure of this but if it works with Rooted 1.1 but not Froyo 0.6.6, most likely a Froyo issue.
bonobomidwest said:
Done some digging on this, and the issue is that my NC can see either the G or the N channel from my router, but not both (even with different SSID) when G is at 2.4 and N is at 5Ghz. It will only see N on 2.4 Ghz. bah.
Click to expand...
Click to collapse
The wifi chip in the NC WL1271 supports only 2.4ghz. Interestingly the kernel reports the chip as WL1273 which does support 5ghz.
I don't think the original post regarding 802.11n being an issue is correct. We have two access points running 802.11n and have no issues with the Nook Color. I have them set up to operate 802.11n at 2.5 and 5 Ghz. I connect the NC to the 2.4 GHZ radio and use the 5 GHz for my laptops. I am using a Netgear WNDR 3700s.
@jerrykur - Well that explains that. I'm trying to sprint up the learning curve as fast as i can with this wonderful device... sometimes i miss things ;-)
@Zhousibo - I suggest you grab "wifi analyzer" from the market. It's an invaluable tool for tweaking your network. For instance, it lets you see which bands are cluttered and clashing. In my neighborhood everybody (i.e. about 20+ networks) is on the default channels 1 or 6. I can literally watch as one network pops up above the noise and drops out again. In exactly the same spot in the house we have a several dB stronger signal if we move the network to a clear channel. Also bear in mind that the encryption and frequency are two totally different issues. I would vary one at a time and look at what wifi analyzer is telling you - my guess is that only adjusting frequency will affect signal strength and signal drop outs. I would also start with the simplest working setup and add or remove optiosn one at a time, watching what happens to the signal. Once you have that problem fixed, then worry about authentication issues (i seriously doubt this is the problem, i've tried all combinations of authentication on my router and they all work - just go for the most secure!)
BTW1: in wifi analyzer you can view signals as a graph in time which will let you see signal drop outs (i.e. let's you watch what is coming into the machine), combined with fpga_guy's suggested method (watching you tube - so following what is coming out of the other end of the software, so to speak), will let you nail down where the glitch is - in the network or in the machine. Similarly you could ahve two devices whatching the same or different youtube sources, if they both fail at teh same time it is a network or even further down the pipe (e.g. ISP) issue.
BTW2: if you are using VOIP, then QoS in your VOIP box could be responsible for a lot of this depending on how your wired network is structured.
BTW3: I should have explained my motivation behind these posts - I just have not had any problems with dropped connection on the NC (other than all the problems with waking in rooted ecalir) on either G or N networks. I can pretty much move around town from rememebred netweork to remembered network and almost always be connected. I'm actually extremely impressed with how well networking DOES work on this machine, especially in Frroyo. BUT my home network is pretty complex and very busy (media center PC, streaming to at least one device most of the time, multiple PC's wireless printer, wired NAS, etc) so has had a lot of fine tuning... So I'm doubly impressed at the lack of drop-outs given this deployment... hence my advice to eliminate network issues first.
Here is an update on my testing of the NC with various routers. My ipod touch, HP DV1000 laptop running Windows XP connects to every router listed without problems. This indicates either a chip or more likely an implementation problem with BN's driver to the TI wifi chip.
NC (ROM 1.1 with Auto-nooter 3.0.0) works with:
Netgear WNR3500L running 802.11n with DD-WRT WPA2/PSK
DLINk DIR615 runnign 802.11g with WPA2/PSK
Work wireless running 802.11g (router unknown)
NC does NOT work with
Sites with hidden SSID
DLINK DIR615 running 802.11n
Sites using WEP with 128bit encryption
NC connects on boot with sites using WEP 64b encryption - FC after resuming from sleep.
@bonobomidwest
My only thinking is that the NC wifi driver is not as robust with the settings (maybe it is settings, firmware, hardware, not sure).
Interestingly, I spent a bit of time away from my home network which is where I have had no problems since I made the original change (FYI, I recently upgraded from Autonooter 1.1, to Nook Froyo 0.6.7 to NF 0.6.8 and have been stable since the change). I stayed at my folks for a week as am living overseas and they have a Belkin router (can't remember model but I gave them this and was pretty good for it's time). I had issues where the wifi had problems connecting after the screen had timed out so did not use the NC as much as I wanted. I also had problems with the wifi on Galaxy S on this network even though I changed the settings.
I haven't done a scan where I am living now but it should be more than where my folks are due to living in an apartment as opposed to my folks house.
I'm at the stage where my network is not 'broke' so not actively looking to fix it but all my devices NC, Galaxy S, PS3, PSP, etc, are all working now - only the NC has had the most problems with connecting to wifi but have been resolved.
I'm having trouble connecting to an 802.11B (yes B) 11Mbps unencrypted router on the bus I commute to work with. Not sure of the brand or model. Wireless status says I'm connected, but testing. I try to browse the web with Dolphin HD, but I never connect. My iPhone connects to the bus' same router without problem.
However it connects just fine to a Linksys WRT610N v2 (flashed with TomatoUSB) running 2.4Ghz N, 40Mhz bandwidth, WPA2/AES
Running Autonooter 1.1, but given what Zhousibo said in the previous post, I'll try out NF 0.6.8.
Any new ROMs help fix WPA2 connectivity problems?
Just bought my NC and flashed a great Froyo ROM on it.
(The first one I bought had obvious hardware issues, 1bar of wifi signal in the same room as my router. Brought it back same day and had it replaced, immediately better. A known reported issue with some faulty NCs).
Had the same issues with wifi connectivity as described here and everywhere on the net. Essentially, it will connect onto the router with N speeds, but is completely unable to access any internet.
I have a great router (it can broadcast 3 separate SSIDs) but I think it doesn't play nice with the nook. So, it was great up until now =P
Router brand and model number: Buffalo WZR-HP-G300NH
802.11 mode: n
SSID visible? yes
Encryption:
SSID1: (WPA+WPA2 mixed TKIP/AES) OR (WPA+TKIP)
SSID2: WPA2+AES
SSID3: WEP (yuck)
The Nook only fully connects to the WPA+TKIP mode (on SSID1) or WEP. The supposed mixed mode setting probably isn't quite as mixed as advertised. The Nook works fine on WEP, but I hate the fact the security is so poor with WEP.
I'd have no problem dropping the SSID1 settings to WPA security, except for the loss of n speeds. Part of the 802.11n specs (has to be WPA2/AES, or NO encryption--not an option). My DVR/home network is on that ssid, so I don't want to lose my n speeds.
So my question is do any other ROMs here help fix the WPA2 connectivity? I know lots of people swear their NC works fine with their WPA2 router, but I suspect their router is just more capable and is switching to WPA-TKIP discreetly.
This is not the same reported problem as having wifi cut off in sleep mode.
EDIT:
Oh, I just realized as a work-around I could put my home network on SSID2, and just the Nook on SSID1.
Get the right router...
Of course I can't speak for others, but my experience with this problem was that this problem was entirely router related. The rooted NC was very slow (to the point of almost unusable on the internet) from my home Netgear WNR834B Wireless N router, regardless of the speed settings, the channel or the security settings. I was able to experience much faster speeds (allowing UTube and Pandora to function properly) at a friend's home (generic Verizon DSL router) and at 2 public wifi locations. As a result I tried another Netgear WPN824 Wireless G Router with the same results as the other Netgear device.
Then I borrowed a couple of Linksys routers from a friend and tried them. The first, an older WRT54GS Wireless G lacking current security standards and then a WRT150N Wireless N. Both worked fine with the NC, allowing full access, with the latter operating at N mixed B, G and N speeds and WPA2 Personal security.
I am very pleased with the results after a few frustrating hours of trying to diagnose the problem. I hope this information is helpful to others. My friend and I will doing some router swapping. I may not tell him about how great the NC is!
Or maybe the NC?
jdefgts said:
Of course I can't speak for others, but my experience with this problem was that this problem was entirely router related. The rooted NC was very slow (to the point of almost unusable on the internet) from my home Netgear WNR834B Wireless N router, regardless of the speed settings, the channel or the security settings. I was able to experience much faster speeds (allowing UTube and Pandora to function properly) at a friend's home (generic Verizon DSL router) and at 2 public wifi locations. As a result I tried another Netgear WPN824 Wireless G Router with the same results as the other Netgear device.
Then I borrowed a couple of Linksys routers from a friend and tried them. The first, an older WRT54GS Wireless G lacking current security standards and then a WRT150N Wireless N. Both worked fine with the NC, allowing full access, with the latter operating at N mixed B, G and N speeds and WPA2 Personal security.
I am very pleased with the results after a few frustrating hours of trying to diagnose the problem. I hope this information is helpful to others. My friend and I will doing some router swapping. I may not tell him about how great the NC is!
Click to expand...
Click to collapse
Yep.. no doubt the right router will work with NC. But at home and at work the NC is the only device having problems. I have no luck in convincing my company to swap out 45 routers so my NC can work
waylo said:
Just bought my NC and flashed a great Froyo ROM on it.
(The first one I bought had obvious hardware issues, 1bar of wifi signal in the same room as my router. Brought it back same day and had it replaced, immediately better. A known reported issue with some faulty NCs).
Had the same issues with wifi connectivity as described here and everywhere on the net. Essentially, it will connect onto the router with N speeds, but is completely unable to access any internet.
I have a great router (it can broadcast 3 separate SSIDs) but I think it doesn't play nice with the nook. So, it was great up until now =P
Router brand and model number: Buffalo WZR-HP-G300NH
802.11 mode: n
SSID visible? yes
Encryption:
SSID1: (WPA+WPA2 mixed TKIP/AES) OR (WPA+TKIP)
SSID2: WPA2+AES
SSID3: WEP (yuck)
The Nook only fully connects to the WPA+TKIP mode (on SSID1) or WEP. The supposed mixed mode setting probably isn't quite as mixed as advertised. The Nook works fine on WEP, but I hate the fact the security is so poor with WEP.
I'd have no problem dropping the SSID1 settings to WPA security, except for the loss of n speeds. Part of the 802.11n specs (has to be WPA2/AES, or NO encryption--not an option). My DVR/home network is on that ssid, so I don't want to lose my n speeds.
So my question is do any other ROMs here help fix the WPA2 connectivity? I know lots of people swear their NC works fine with their WPA2 router, but I suspect their router is just more capable and is switching to WPA-TKIP discreetly.
This is not the same reported problem as having wifi cut off in sleep mode.
EDIT:
Oh, I just realized as a work-around I could put my home network on SSID2, and just the Nook on SSID1.
Click to expand...
Click to collapse
I have similar issues. I can't use the internet reliably on my Nook Color or my EVO on my home router unless I'm running WPA+TKIP. I would prefer not to have my router setup this way though because of the security concerns and it not being much harder than WEP to crack.
Guess I'll just stick with WPA2+AES and look for another solution...
just to share some experience that hapenned to me:
In France we have an Internet box (wich is basically a router) that deserve 2 wireless network. One public shared with all user from the same Internet provider and one private for home.
At first my nook only saw the public one (wich is not really fast). The private one was not visible (or just flash in network tools on nook).
After some investigation i change the Wifi canal (from 10 to "automatic"). After that, no to see it and connect (if you forget the nook "special sleep policy")
soobaerodude said:
I'm having trouble connecting to an 802.11B (yes B) 11Mbps unencrypted router on the bus I commute to work with. Not sure of the brand or model. Wireless status says I'm connected, but testing. I try to browse the web with Dolphin HD, but I never connect. My iPhone connects to the bus' same router without problem.
However it connects just fine to a Linksys WRT610N v2 (flashed with TomatoUSB) running 2.4Ghz N, 40Mhz bandwidth, WPA2/AES
Running Autonooter 1.1, but given what Zhousibo said in the previous post, I'll try out NF 0.6.8.
Click to expand...
Click to collapse
Tried Nookie Froyo 0.6.8 on the bus this morning. It connects and gets an IP address, but still can't browse or do anything internet related.
Going to try to exchange my NC for a new one tonight, and see if things improve.
soobaerodude said:
Tried Nookie Froyo 0.6.8 on the bus this morning. It connects and gets an IP address, but still can't browse or do anything internet related.
Going to try to exchange my NC for a new one tonight, and see if things improve.
Click to expand...
Click to collapse
Please give an update after you exchange your NC. I suspect is the wifi chip drivers and not a bad NC.
fpga_guy said:
This is a compilation of threads found on this forum as well as the BN forum. I thought having it in one place will help.
The NC is the first device that I have encountered that had intermittent wifi problems. At home, I have a mixture of Macbooks, iPod, a Viewsonic G Tablet running Android 2.2, desktops running Windows 7 and XP using various brands of USB wireless adapters and have NOT had any problems using 802.11n with WPA2/AES encryption.
From other threads: "As always, everything in this guide is completely at your own risk, I am not responsible for you messing up your device further nor am I responsible in the event that your Nook Color explodes and kills your cat, grandma, etc."
Click to expand...
Click to collapse
i dont experience any of these problems where ever i go
i have been able to connect into every coffee shop, book store, and school campus(i go to 3 different schools) plus i can hold a wifi connection at home
ill give you my router settings because it may have something to do with it
Router brand and model number: eg: NETGEAR : unknown
802.11 mode: b,g ,n
SSID visible: yes
Encryption: no or if yes: yes WPA2
NC Rom: HC preview 4
NC OS: 3.0
and my droid x works as well with the WPA/WPA2 security

WIFI issue

Hi,
I have some issue with WIFI. WIFI connection is very unstable even in 1 feet from router (Linksys WRT350N on DD-WRT 13064). It is connected very quickly and get IP address but then connection is working with very large delays (30+ seconds). If I disable and reenable WIFI adapter then it work good for some time but then it lost it again. All other devices work find with same router. I got 2 motorola BIONIC at launch day and both have WIFI issue.
Has anyone else have same issue?
Dmitry
I get slower than 3g speeds when I connect to my home Airport Extreme router.. No idea why... but my connection speed at work on our Wifi is just fine.
ddv2005 said:
Hi,
I have some issue with WIFI. WIFI connection is very unstable even in 1 feet from router (Linksys WRT350N on DD-WRT 13064). It is connected very quickly and get IP address but then connection is working with very large delays (30+ seconds). If I disable and reenable WIFI adapter then it work good for some time but then it lost it again. All other devices work find with same router. I got 2 motorola BIONIC at launch day and both have WIFI issue.
Has anyone else have same issue?
Dmitry
Click to expand...
Click to collapse
Mine kept disabling the wifi connection. Once I booted into recovery and reset, it was fine.
ive had issues with wifi too,got full signal but phone browser wont load anything.
I had this same problem. I hard reset using recovery but it came right back. I then did a reset using the the settings, privacy. I was able to fix the issue with the second hard reset. The only change I did was not allow Google to restore my phone from previous backup.
Goodluck.
tron101 said:
ive had issues with wifi too,got full signal but phone browser wont load anything.
Click to expand...
Click to collapse
Mine does the same thing.
Sent from my DROID BIONIC using xda premium
ive tried resets, changing setting on router, still unable to get browser to load web pages with wifi.
Is this a universal issue, or do I need to go back to Verizon and get the phone replaced? Anyone have the exact answer to this?
tron101 said:
ive tried resets, changing setting on router, still unable to get browser to load web pages with wifi.
Click to expand...
Click to collapse
What are the odds you have WPA with AES encryption set on your router? I have had the Droid X and Bionic fail to load pages under that setting. But as soon as I switched the encryption to TKIP it worked on both.
chrisb9712 said:
What are the odds you have WPA with AES encryption set on your router? I have had the Droid X and Bionic fail to load pages under that setting. But as soon as I switched the encryption to TKIP it worked on both.
Click to expand...
Click to collapse
Looking at the encryption now under security - NONE is what I have selected...
WEP CONFIGURATION
WEP Passphrase
WEP Authentication Yes Open No Shared Key
Encryption No Enable 64-Bit No Enable 128-Bit
WPA Encryption No TKIP No AES
Group Rekey Interval 0 seconds
WPA Authentication No Remote (Radius) Yes Local (WPA-PSK)
check your wireless frequency
For those of you able to connect with no problem but still can not access any internet i read somewhere that some Droid bionics were having trouble with b/g 2.4GHz routers. If your router is b/g only then disabling WEP encryption could work. I checked and sure enough mine is only wireless b/g however WEP encryption was already disabled. The fact that it could be because its a b/g only router would explain why I have no problem getting online at my job, which just aquired a new belkin dual band router, and my school, which I have no doubt uses only dual band routers being a college. I believe normally a/n 5GHz devices are suppose to be backwards compatible with wireless b/g. The only difference being less reliable and slower connection. Best bet is get a dual band router.

[Q] Way to make wifi connect automatically?

I'm not sure if anyone else is having this problem, but after my phone has been on standby, the wifi disconnects. I assume this is normal, battery-saving behavior. The problem is when I wake the phone up, it's hit-or-miss in that it doesn't connect back up all the time. Sometimes, it'll connect without user intervention. Most of the time though, I'll need to pull down the menu and select the "wireless networks found" notication to bring up wifi settings (connects as soon as the settings comes up). This has not happened with any other android phone I've owned... just the Bionic.
I'm still running the stock ROM, though rooted. I'm considering putting DroidTheory's deblurred on, but the phone actually behaves pretty well, so I haven't yet.
Sent from my Android using Tapatalk
Go into wifi settings and click the menu button and advanced settings. I would change your wifi settings so that wifi never sleeps. You will actually save more battery life being on wifi then having your cellular radio on. Just turn off wifi if you leave your house or place where you use a wifi connection.
Try "Y5"
It'll turn your wifi off when you have no remembered wifi in the area. I believe it works by cell site recognition.
HINT: When you are configuring a new protected/secured wifi turn Y5 off until you have the passkey typed in to make sure the phone leaves wifi turned on enough time for you to enter the key.
skullvet said:
Go into wifi settings and click the menu button and advanced settings. I would change your wifi settings so that wifi never sleeps. You will actually save more battery life being on wifi then having your cellular radio on. Just turn off wifi if you leave your house or place where you use a wifi connection.
Click to expand...
Click to collapse
^This - wifi sleep policy.
The problem with this phone is that the radio stays on when on wifi. If you really want to save battery, flip on airplane mode THEN wifi.
Sent from my DROID BIONIC using xda premium
skullvet said:
Go into wifi settings and click the menu button and advanced settings. I would change your wifi settings so that wifi never sleeps. You will actually save more battery life being on wifi then having your cellular radio on. Just turn off wifi if you leave your house or place where you use a wifi connection.
Click to expand...
Click to collapse
I have tried this and, it's still hit and miss connecting to WiFi. The icon is in the notification bar (gray color sometimes blue) but, it won't connect sometimes.
Does every Bionic have sucky WiFi? It even disconnects while I'm browsing!
tooter1 said:
Does every Bionic have sucky WiFi? It even disconnects while I'm browsing!
Click to expand...
Click to collapse
Not every one. Mine never disconnects during normal ise and reconnects automatically on wake up.as far as i know I'm using default settings
I think, I may have fixed my problem. I'll post tomorrow what I did to get it working.
Sent from my DROID BIONIC using XDA Premium App
I tried everything here and non of it worked, plus making sure "USE PROXY SERVER" was unchecked and, it still didn't work.
So I got to thinking about what type encryption I was using on my router. I knew I was using "WPA" just didn't know which one.
Opened router settings and, it was set to "WPA2 Personal" set it to "WPA Personal" with same password and, my WiFi has been working ever since I did this.
Hope it stays this way!
I guess this phone wasn't meant to connect to WPA2 Personal connections. Can someone confirm this to be true?
I hope this helps someone out.....
I have 3 Apple routers with WPA2 and the Bionic works fine with them. Also on a Netgear high-end router with WPA2.
Geek stuff coming:
If WPA is what works, that's great. WPA2 is preferable, but only because there is a weird and esoteric possibility of capturing a WPA passcode using the TKIP encryption used by WPA (WPA2 uses AES encryption, or, technically, CCMP). However, if you go into the router's settings and change the WPA group key timeout (or it may be called WPA group rekey interval) to faster than 11 minutes, that will prevent that exploit from happening. (Changing to WPA with AES as opposed to TKIP would also be fine, if the router supports it. However, that may have been what was causing your issue with WPA2, so...)
(If you are interested in reading a technical article about the TKIP exploit, it's here: http://arstechnica.com/security/news/2008/11/wpa-cracked.ars )
doogald said:
I have 3 Apple routers with WPA2 and the Bionic works fine with them. Also on a Netgear high-end router with WPA2.
Geek stuff coming:
If WPA is what works, that's great. WPA2 is preferable, but only because there is a weird and esoteric possibility of capturing a WPA passcode using the TKIP encryption used by WPA (WPA2 uses AES encryption, or, technically, CCMP). However, if you go into the router's settings and change the WPA group key timeout (or it may be called WPA group rekey interval) to faster than 11 minutes, that will prevent that exploit from happening. (Changing to WPA with AES as opposed to TKIP would also be fine, if the router supports it. However, that may have been what was causing your issue with WPA2, so...)
(If you are interested in reading a technical article about the TKIP exploit, it's here: http://arstechnica.com/security/news/2008/11/wpa-cracked.ars )
Click to expand...
Click to collapse
Thanks for the article.
UPDATE:
After further investigating the settings on my Linksys WRT160n w/DD-WRT firmware. I saw that it has an option to enable TKIP+AES and that was selected.
So I changed it to WPA2 Personal with just AES selected, whola it has worked like this too.
I'm glad to have it working with the better encryption settings.
tooter1 said:
After further investigating the settings on my Linksys WRT160n w/DD-WRT firmware. I saw that it has an option to enable TKIP+AES and that was selected.
Click to expand...
Click to collapse
This must be an issue with Android. My Eris would have problems connecting to routers using TKIP+AES, but I figured that this would have been fixed two years later. It's weird that it's not.
Thanks for posting the update. Now at least if somebody else reports a similar issue we can have them check this setting.
Flapjack
Here's a couple things to try that I'm doing and I've had no problems since Day 1 with my Bionic.
If you're using WPA2 use the PSK variant.
Download and install the free WiFi Analyzer from Google market. It's great when dealing with WiFi networks in general-not just your own.
Next look for the Market App 'WiFi Connecter Library' by farproc (it's a helper app-not a stand alone program)and install it. It adds some nice features regarding saving WiFi settings and automatically reconnecting. Since using those I always have Windows-like options for remembering and auto-reconnecting to Access points.
Thanks for all the awesome replies! I had forgotten to enable notifications for the thread, so I didn't even realize anyone replied.
skullvet said:
Go into wifi settings and click the menu button and advanced settings. I would change your wifi settings so that wifi never sleeps. You will actually save more battery life being on wifi then having your cellular radio on. Just turn off wifi if you leave your house or place where you use a wifi connection.
Click to expand...
Click to collapse
I didn't even realize there was an advanced menu. I'm trying this first, so hopefully it does the trick (or at least makes it a little more tolerable).
doogald said:
If WPA is what works, that's great. WPA2 is preferable, but only because there is a weird and esoteric possibility of capturing a WPA passcode using the TKIP encryption used by WPA (WPA2 uses AES encryption, or, technically, CCMP). However, if you go into the router's settings and change the WPA group key timeout (or it may be called WPA group rekey interval) to faster than 11 minutes, that will prevent that exploit from happening. (Changing to WPA with AES as opposed to TKIP would also be fine, if the router supports it. However, that may have been what was causing your issue with WPA2, so...)
(If you are interested in reading a technical article about the TKIP exploit, it's here: http://arstechnica.com/security/news/2008/11/wpa-cracked.ars )
Click to expand...
Click to collapse
This is great summation of the TKIP exploit. You'd be amazed how many people have no idea how this works. Another thing to point out is that WPA is subject to man-in-the-middle attacks. You can effectively prevent against this by making your WPA passphrase more complex. Personally, I use a short sentence with plenty of special characters.
Here's a good read on MITM attacks in general:
http://www.ab9il.net/wlan-projects/wifi-security2.html
You can test your access point security by using the latest bootable Backtrack distro and any number of guides online.
BleedingEdj said:
Flapjack
Here's a couple things to try that I'm doing and I've had no problems since Day 1 with my Bionic.
If you're using WPA2 use the PSK variant.
Download and install the free WiFi Analyzer from Google market. It's great when dealing with WiFi networks in general-not just your own.
Next look for the Market App 'WiFi Connecter Library' by farproc (it's a helper app-not a stand alone program)and install it. It adds some nice features regarding saving WiFi settings and automatically reconnecting. Since using those I always have Windows-like options for remembering and auto-reconnecting to Access points.
Click to expand...
Click to collapse
I'm using WPA2-PSK with AES encryption. I'll definitely look into those apps, though. It would be nice to have wifi turn off when there are no recognized hotspots in the area, as someone mentioned on page one.
Thanks for all of the great tips. Working better than ever!
Ever since changing the sleep setting under "advanced", I've had absolutely no problems. Battery life is much better, too. Thanks!!!
Y5 is the one of the best tips here..
It will turn your wifi off when you aren't in a known area.

Grey WiFi icon

Got me a new router from my ISP, of course there were issues instantly! Having problems connecting to wifi. Called my ISP and they said there is a bug somewhere in the router or in android itself. The router is a ZYXEL P-2812HNU-F1. They said I needed to get a static ip adress to each device. I got my Galaxy S2 up and running in no time, however, my HP Touchpad is not being so friendly. It says I'm connected but I get the grey wifi icon. Tried to disconnect and reconnect but no result. Also tried to forget the wifi and so on but no result. Also changed to b/g since it handles /n aswell. I've changed the router channel. In addition, my TP have begun to reboot randomly often in very fast cycles. I've flashed the Supreme mods a few days ago and everything worked flawlessly with my old router. Could the Supreme mod interfere with this maybe? Anyone please, this is so frustrating!
Edit: I'm on CM9 14 July build
Creutz said:
Got me a new router from my ISP, of course there were issues instantly! Having problems connecting to wifi. Called my ISP and they said there is a bug somewhere in the router or in android itself. The router is a ZYXEL P-2812HNU-F1. They said I needed to get a static ip adress to each device. I got my Galaxy S2 up and running in no time, however, my HP Touchpad is not being so friendly. It says I'm connected but I get the grey wifi icon. Tried to disconnect and reconnect but no result. Also tried to forget the wifi and so on but no result. Also changed to b/g since it handles /n aswell. I've changed the router channel. In addition, my TP have begun to reboot randomly often in very fast cycles. I've flashed the Supreme mods a few days ago and everything worked flawlessly with my old router. Could the Supreme mod interfere with this maybe? Anyone please, this is so frustrating!
Edit: I'm on CM9 14 July build
Click to expand...
Click to collapse
The wifi icon color is blue when you're connected to the Google servers. I remember reading something similar to your situation, I'll post a link if I find it. Meanwhile, you've probably tried this, but in case you haven't, try turning the router off for a while, then turn it back on again. You might want to go to a later build, they're quite stable. I'm one of the lucky ones, only had any wifi issues once, and turning the router off then back on solved it for me.
Good luck.
Edit : Try deleting the Supreme mods, they might be the problem.
As you said, I've tried to switch off the router and put it back on but I tried it once again but no result. I've also removed the supreme mods but there is no difference. I still get the grey wifi icon. Maybe should try a newer build, so tiredsome though but maybe the only solution. Will call my ISP for a factory reset on the system aswell.
Edit: Managed to come up with a solution. My ISP wasn't of any help so I had to do something on my own. So, I changed the security to wpa instead of wpa2 and noticed that my tablet got connection! The thing is, I want to use the /n standard and wpa does not support that. So (again), I had to enable a second wireless network and luckily my router supports four. One network with wpa2 (laptop) and one with wpa (tablet). Not a pretty solution but it works!
Creutz said:
Got me a new router from my ISP, of course there were issues instantly! Having problems connecting to wifi. Called my ISP and they said there is a bug somewhere in the router or in android itself. The router is a ZYXEL P-2812HNU-F1. They said I needed to get a static ip adress to each device. I got my Galaxy S2 up and running in no time, however, my HP Touchpad is not being so friendly. It says I'm connected but I get the grey wifi icon. Tried to disconnect and reconnect but no result. Also tried to forget the wifi and so on but no result. Also changed to b/g since it handles /n aswell. I've changed the router channel. In addition, my TP have begun to reboot randomly often in very fast cycles. I've flashed the Supreme mods a few days ago and everything worked flawlessly with my old router. Could the Supreme mod interfere with this maybe? Anyone please, this is so frustrating!
Edit: I'm on CM9 14 July build
Click to expand...
Click to collapse
I did read somewhere that giving the TouchPad a static IP address helped with a lot of WiFi problems, maybe its something you could try. I personally haven't had any WiFi problems so I have never needed to test it.
BIGSimon said:
I did read somewhere that giving the TouchPad a static IP address helped with a lot of WiFi problems, maybe its something you could try. I personally haven't had any WiFi problems so I have never needed to test it.
Click to expand...
Click to collapse
Made a little update on my previous post. The solution was that I needed to change the security on my network (wpa2 to wpa). But as you mentioned, I needed to set it to a static IP adress aswell. Up and running now, as I type at least
try running an atheros update. i also prefer wifi analyzer for connecting to wireless networks rather than the android wireless settings. It shows you detail and information that android settings do not. Lets you configure channel options for B/G/N and A. plus more. its avail in google play.

Categories

Resources