Database Develop

please help me...

i use jump spl 1.93
after that,i forgot to flash with hardspl 3.29
instead,i went straight to try to flash a new rom
now it stuck triclor screen...
can anyone help me?

Er, you did what??
Have you done HardSPL at all yet? Even V1?
Is your device security unlocked? If so Franken Kaiser might help you. http://forum.xda-developers.com/showthread.php?t=394584&highlight=frankenkaiser
If not find a Mod called GSLEON3 and buy him a beer.
Sorry GSLEON3, I'm sending another bricked device your way
Dave

i fixed it!!!
sumhow thank god...
first i make a hard reset
then i enabled USB connection(previously when im trying to install hardspl 3.29,i was asked to disabled it)
then i try to run kaiser hard spl 3.29 again
rom updating work continue without being stucked on tri screen color!!!
thank god,im so happy
alhamdulillah

n yeah,i have hardspl v1 before that accident happen

Congrats.
And thanks for sharing your process of fixing it.
Dave

husband bricked wing .....any advice

i have been roming and cooking with my tmobile wing for about a year now so ive become really good at it i have yet to brick my phone.....UNTILL NOW
MY NOOB HUSBAND thought while i was at work and he was using my phone to rom it he didn't know that certin roms go with certin phones so when he put the neo rom onto my tmoble wing he bricked it
i have it into bootloader mode but when i plugh it inot the usb activesync wont reconize it so i am having a hard time hard spl ing it...is the phone useless now or is there a way to fix it. im also getting an rom error. anyone have any advice....

What SPL is it showing? If your phone wasn't HardSPL'ed before, he may have ruined it and nothing will fix it short of changing the motherboard. Try flashing it with the stock RUU if it's not HardSPLed. If it is, try flashing it with your ROM named HERAIMG.nbh and place it in your SD card. Good luck.

on the bootloader screen it shows
ipl 4.10.0002
spl 4.10.0000

hyoungluv said:
on the bootloader screen it shows
ipl 4.10.0002
spl 4.10.0000
Click to expand...
Click to collapse
Sounds like the IPL and SPL are still intact. It's not HardSPL'ed so just try the stock RUU. Not having the green icon on activesync doesn't mean it doesn't see it. It means that it isn't synchronizing.

yup same thing happened to me with my first flash. i used a different rom and thought i bricked. recovered with the stock RUU

divorce him. it's that simple
jkjk
yeah, just RUU it.

lol divorce him thatsfunny, the papers were out but lucky for him i fixed it lol...i shoulda thought of using the stock rom to begin with thanks eveyone for your help and advice

hyoungluv said:
lol divorce him thatsfunny, the papers were out but lucky for him i fixed it lol...i shoulda thought of using the stock rom to begin with thanks eveyone for your help and advice
Click to expand...
Click to collapse
Great to hear that it's working, again! Now, for an important part: So you're a silent personal cook who only cooks for herself? ^_^

No, the most important part is... HARD SPL THAT THING! lol

If mine read
IPL 4.26.0002
SPL 4.26.0000
is that really bad?
Thanks for your help
EDIT:
Thanks God, it isn't. Was able to install TMobile's ROM from Bootloader.
IF others have bricked their Herald/Wing:
1. Download TMobile's ROM from here : http://wiki.xda-developers.com/index.php?pagename=Herald_Upgrades (Choose 4.26.531.4)
2. Enter Bootloader on your Wing (Hold in the camera button and then soft reset with your stylus)
3. Run the TMobile ROM.
It worked for me. Hope it does for you too.

restoring a bricked phone

any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.

Was restoring the stockspl succesfull?
What info do you get in bootloader?

The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.

pls dont wast threads
hi
a humble request Kindly dont was threads i have created a specific thread for Q& A on Jade why not post it their pls see below link
i see u have wasted 3 thread which could have been used for a much more usefull purpose this is just my humble request to you i hope u will do the neeful thanks
Note : kindly read the first page u would understand why not to waste threads
http://forum.xda-developers.com/showthread.php?t=534581
orange3g said:
any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Click to expand...
Click to collapse

"a humble request Kindly dont was threads" read your thread on that, space taken up whether new thread or reply is the same.

orange3g said:
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
Click to expand...
Click to collapse
Am afraid you have a problem, you should have down it the other way around...first stock ROM then stock SPL.....but this is merely a fact then helping you out, i have absolutely no clue how to go from here...sorry!

Maybe someone who can offer some practical assistance will be along soon ......
@Nirak: yes, I misread it. What a silly thing to do. Do you think HTC can help. The phone is in warranty.

Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....

May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.

Have you tried to flash your rom through the boot loader mode

try this
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck

orange3g said:
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Click to expand...
Click to collapse
Send them a PM, Olipro is not often here, but Cmonex is

haree said:
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
Click to expand...
Click to collapse
Doesn't work because it needs a functioning windows mobile, which I don't have. Mine gets stuck.

thomas01_58 said:
Have you tried to flash your rom through the boot loader mode
Click to expand...
Click to collapse
Yes, nothing happens. The screen is stuck at 0%. I tried using a htc original rom, it got to 1% and said something like not suitable for this device.

I sure this sounds rather silly ,and I am sure you have tried it,have you tried removing the battery and then putting it back again.

Not sure if you tried this already:
Run HardSPL when your phone is in tricolor mode (bootloader?).
Then reflash a stock ROM, also in tricolor mode.
Finally, flash stock SPL.
Hope this helps.

@izzysc: I have tried it (will try again though) in running HardSPL when phone is in tricolor mode. It did not work.

Nirak said:
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
Click to expand...
Click to collapse
I have PMd Cmonex. Thanks.

replied to PM

cmonex said:
replied to PM
Click to expand...
Click to collapse
Tx! had an idea you could help out...

htc tytn 2 not starting up

iam new to this flashing roms
although i installed hard spl
i dont know which version but it was succesful
i tried installin the paradox for my mobile after that its showing brick like face of skeleton
with R 1.65.24.36
G 25.94.40.06H
D 3.By josh
its not starting up now pls help

urgent
even though i hard reseteed its not booting pls help me out

antonieoalan said:
even though i hard reseteed its not booting pls help me out
Click to expand...
Click to collapse
Hold in camera and power button while doing a soft reset. What does it say on the bootloader screen ?
Then try and flash your stock rom, found in the wiki.

Hey Guys,
Moved your thread over to Kaiser general. That area you posted in is for new rom's and rom dev..
Peace,
Joshua

help
its showing like this
KAIS130
SPL-3.29.Hard
CPLD-8
usb
i cant access my sd card too

Returning to Stock for repair! URGENT

Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody

To add an update, the boot loader screen shows:
BLAC100 32M
SPL-1.56.OliNex
Micro-Blackstone (LED) v6
Thought this might help in finding out how much work to stock?

I Think u need the original rom... or a htc one from the website?? ... can it not be downloaded from the htc website?? i may be wrong

I do but also need to make sure I do an original spl and radio as well

first off go to htc.com and download the romupgrade thats on that side (ive non is on the side check the wiki for youre countryrom)
then flash that one and se ive radio comes with it
ive not flash radio 13.**.**.**
then from the hard spl thread there a tut how t make youre spl stock again and youre finished

This is the last official ROM with 1.56 spl and 1.13 radio
h..p://rapidshare.com/files/231263089/-HTC_Touch_HD-MR_2009-RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe

Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?

J7ody said:
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
Click to expand...
Click to collapse
At boot it shows, just restart your device and look at the red text in the bottom right corner, there it will show your current radio version.
Could also see it in device info when the device is on but dunno if you still can considering you need to return it.
gl.

Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off

anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....

Curious????
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I also have read a couple of these help requests and the same problem, but what could it be, is it the windows mobile 6.5 builds that are doing this (not blaming the chef's in anyway), or some conflict with the spl... have to investigate this more...

imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?

Returning to Stock for repair! to having screen problems after changing the rom
J7ody said:
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
Click to expand...
Click to collapse
dataSaMm said:
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Click to expand...
Click to collapse
Hi, can someone (Admin) change the title of this thread from Returning to Stock for repair! to Having screen problems after changing the rom?
I think the first is solved and now we have this new problem in hand.
best regards

+1
i've had the problem with a cooked french rom (Pyrana V17C). My screen started to freeze for a few seconds. During that time, when I put the finger on the screen and slide, the screen follows the move but it comes back to where it first was, ant the move is finally not taken in consideration ... it looks like the screen is an elastic...
So it did it sometimes and it lasted a few seconds first, and then, a couple af days later, it was more often, and I had to soft reset everytime, and yesterday, I finally had to hard reset to take back the hand, and the bug came back more quickly. So I installed the latest release of this rom this morning and everything seems to be stable since a couple of hour. If it comes back I'll try another rom, but if someone can find a way to set this, that would be perfect ...

J7ody said:
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
Click to expand...
Click to collapse
You've found your solution to original query and returned device to stock rom & SPL. Thread has now run its purpose
Thread closed