plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
this is another story of bricked Herald device
there's no solution for that you have to wait
halder said:
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
Click to expand...
Click to collapse
what part is it stuck on, the white screen?
Provide more information
hey bro, he's saying about error 300, pls get newer update utility
flash area is screwed so you may think in a customized ruu update to ignore cid check and get your phone on
my friend updated it he didint install the 3 cab before doing the ruu utility .he stuck in white screen for long time then ..we are in bootloader menu now...
error 300 is beyond my knolage
plz help how to custimize the ruu ..
i know how to do it for wizard but not for herald is it the same way or there another way ..
thank you in advance
htc p
ipl 1.08.0001
spl 1.08.0001
model hera100
bro.. error 300 means "supposed" you have to flash your device with a newer flash tool (newer? there's no newer utility!) so we have to find the way to recover OS part first- I think by recovering OS and booting up device again we can find a way to recover CID area and unbrick our devices
the problem is, nobody wants to help
jockyw2001 --> he's a great coder/programmer but he doesnt look for those areas
Olipro --> he didnt say a word about that. We're expecting hardSPL unbrick tool
POF --> no words too
so, these are the 3 great programmers here, but no words from them.
What can we do? I think nothing... Bcoz Im stucked in "Invalid Certificate" screen and no reply from anyone... I think the brick problem here is from everyone cuz we dont get any reply
Pls.. I know we get devices from several months ago.. I think we can get all opinions, suggestions, everything and get herald unbricker.. come on!
tramuyo.... while your answer is technically correct, theres a better answer.
From what i understand, he attempted to flash a custom rom via hardspl or USPL. This is a no-no if the SPL is lower than 4.
so for now my phone is bricked .
i tried to flash it with my original rom. still error 300
.thank you guy for u replay
the problem is, we need Olipro help to get our devices recovered. At least, recover OS part
true. maybe we can somehow lure him into the forum. let's assume he searches his name on a semi-regular basis (i do, but i digress)
Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro
thats probably enough
Olipro doesnt reply our messages. I think he have the clue to solve our problems, but i dont know why he doesnt want to publish it or something
can we start to donate for man who can solve this problem?
can we start to donate for man who can solve this problem?
i can donate 100$
me too
just help as we will do evey thing
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
i have also such problem. 1st i have make hard spl and write patched rom in to p4350. after i try 2 write oficial rom and got only boot menu.
as i understant the only solution 4 it is writing native rom on it but problem is that i dont know what rom was there before. my mistake . another problem is that hard spl works only in normal mode via instaling cab files and patching spl. so does exist hard spl 4 this model which is writing via boot mode or patching rom whithout cid checking?
I don't know if there's anything you can do, but try this. It hasn't been tried on the Herald, that I know off, but it's worth a try.
halder said:
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
Click to expand...
Click to collapse
This is a wild guess, but if your able to get to the boot menu.
What about trying to download a micro rom and copy it over to your sd card.
Then perform a soft reset as you would to enable the boot loader menu.
I think it's worth a try.
has there been an update on how to exit from a tri-color bootloader screen?
I ran into this problem today and have searched for hours with no clue as to a way to resolve the issue.
I notice also that right before the tri-colored screen appears I see a flash of a white screen and I believe it says it cannot detect SD card... if that helps
I encountered this problem only after having flashed to the new 7.7 open touch and my phone no longer being recognized on my PC for activesync
problem (300) bootloader
I have problem the same. exists somebody that helps me? urgent
i have same phone hera100 and same problem still in tricolour display.how solve this problem
b.r
bahri
i hope this is where i should post this.
whilst using my phone it froze,so soft reset was done then it went into tri screen
my kaiser wont go out of tri screen.i have this on screen.
kais130 mfg
spl-1.0.olipof
cpld-8
after trying hard reset and soft reset it wont pass this screen,it loads straight back to bootloader mode.i had duttys 6.1 rom on and nikis radio.
is there a solution to this problem.all was fine until this.ive searched all over for the past week and i cant seem to find a solution,so a little help is called for.id appreciate any help if possable and thank you in advance
Are you sure that your camera-button isn't stuck? Try pushing it hard few times, and then boot again.
Try flashing an official rom onto it while on that screen?
hi tried new rom and camera button isnt stuck,it seems like theres something wrong with spl-1.0.olipof.after installing new rom it boots straight to tri screen.can olipro be tacken off.just thinking of other things to revert to normal.when soft reset done it goes straight to tri screen
Try HardSPL
Why not flash it with a different SPL - like any of the HardSPLs such as Jocks:
http://forum.xda-developers.com/showthread.php?t=396922
and then flash with a new rom, suitable to that SPL?
rgds, MN
Fyi, this issue is being discussed in lots of threads @ ROM Development... I do have the same problem.
http://forum.xda-developers.com/showthread.php?t=402562
http://forum.xda-developers.com/showthread.php?t=371154&page=9
... and this one being the most recently updated:
http://forum.xda-developers.com/showthread.php?t=393337&page=29
Just to point out that the problem is solved (I think) - read here -> http://forum.xda-developers.com/showthread.php?p=2415437#post2415437
hello friends
i need ur help
my X1 is jammed in the startup screen (Sonyericsson) logo and dont want to boot
i'v tried to flash any rom but its not working.
i can enter the bootloader but wont install any rom (jammed in loading) the new rom
plz if u can help me reply and thank u
done Hard spl?
are you using the computer or memory card for rom?
Couple of suggestions:
Make sure you re-named the file kovsimg,
Try a different rom.
hello again
i cant hardspl or dont know how via memory card! if u can help me
and i'v tried another roms and its not working
It's in a stickied thread.
http://forum.xda-developers.com/showthread.php?t=445662
PLS HELP!
I flashed rom now phone stuck on SPL area ( 3 coluor) and it says " your OS ROM isn't customized for your hardware."
what to do. my phone is Tmobile MDA Basic. I upload HSPL. SPl is now : 2.00.cmon
I uploaded 2 rom one is: RUU_Opal_hTC_Asia_WWE_1.35.720.2_infineongsm4.1.13 .66_03.29.90_Ship
and other is: OPAL_original_ROM_1.35.xx.xx
pls need to revive the phone urgent. client makes problem. any help!
best regards
KUBAT1 said:
PLS HELP!
I flashed rom now phone stuck on SPL area ( 3 coluor) and it says " your OS ROM isn't customized for your hardware."
what to do. my phone is Tmobile MDA Basic. I upload HSPL. SPl is now : 2.00.cmon
I uploaded 2 rom one is: RUU_Opal_hTC_Asia_WWE_1.35.720.2_infineongsm4.1.13 .66_03.29.90_Ship
and other is: OPAL_original_ROM_1.35.xx.xx
pls need to revive the phone urgent. client makes problem. any help!
best regards
Click to expand...
Click to collapse
See if you can perform a hard reset. We have a detailed procedure of reseting the device. Hope a hard reset works for you.
Hard reset procedures
hey am looking for anyone that can help on give me some advidce.
i bought my htc tilt unlocked it came with spl 3.56 so a friedn who knows about flashing said he will help me so he gave me the rom he renamed it then i put it on my memeory card and shut down then press power and camera bottom at the same time the spl screen flashes the all ii will see is loading...and nothing happens so i was wondering if someone can help me i was trying to upgrade from 6.1 to 6.5
if it helps the hard spl installed was
KAS1*0
SPL-3.56.0000
CPLD-8
so can anyone help??
grenez said:
hey am looking for anyone that can help on give me some advidce.
i bought my htc tilt unlocked it came with spl 3.56 so a friedn who knows about flashing said he will help me so he gave me the rom he renamed it then i put it on my memeory card and shut down then press power and camera bottom at the same time the spl screen flashes the all ii will see is loading...and nothing happens so i was wondering if someone can help me i was trying to upgrade from 6.1 to 6.5
if it helps the hard spl installed was
KAS1*0
SPL-3.56.0000
CPLD-8
so can anyone help??
Click to expand...
Click to collapse
read the sticky in the rom development forum, you will find the answer.
Do what Mr. Clown said and try to flash using RUU
thanks
thanks i did what mr clown said and i did what they said onb the stickes but then my phone would not sync so i had clear storage,so i know that am doing somthing wrong,cause i got it off the loading screen cause that where it had stuck now its stuck at 0% but thanks for the tips i will try till i get it or i breck my phoneam new to this so in time i will learn
many thanks to mr clown and Abagnale
grenez said:
thanks i did what mr clown said and i did what they said onb the stickes but then my phone would not sync so i had clear storage,so i know that am doing somthing wrong,cause i got it off the loading screen cause that where it had stuck now its stuck at 0% but thanks for the tips i will try till i get it or i breck my phoneam new to this so in time i will learn
many thanks to mr clown and Abagnale
Click to expand...
Click to collapse
Flash your stock rom