[Q] Custom ROM, problems with Tango? - Captivate Q&A, Help & Troubleshooting

Hi all,
I've been trying a couple of ROMs/Kernels and with I am able to use my captivate's camera using Tango with some ROMs but not with others. I used to have Serendipity running and Tango worked fine but I recently installed Firefly with the SpeedMod kernel and I cannot get the camera to work with tango. I've even copied serendpity's camera and camerafirmware apk's to my phone as well as the galaxy tab email's apk. Could it be that I need to use the Email.apk I was using with Serendipity?
Thanks!

I am using I9000 original rom with Cognition 4.3 kernel. Finally, the back camera worked with Tango. The SpeedMod K13D kernel didn't work with Tango's back camera.
Thanks for designgears kernel!

I just find out the incoming voice call doesn't work.

Related

[Q] Xcaliburinhand's reorient Kernel advise

So i got the reorient kernel so now i am wondering which of the i9000 rom's to flash? most of the Rom's over there have their own kernels built in so besides Tayutama's i can't find anything to try out
Voodoo/z4 compatibility preferred.
You can use pretty much any one of the roms that are in the i9000 forum. Just flash the rom and then the kernal right away afterwards through recovery mode. Right now im using Darkys raw steel edition v3.0 with reorient.
schilj14 said:
You can use pretty much any one of the roms that are in the i9000 forum. Just flash the rom and then the kernal right away afterwards through recovery mode. Right now im using Darkys raw steel edition v3.0 with reorient.
Click to expand...
Click to collapse
I'm making that rom compatible with captivate kernels as we speak (trying anyway, pain in the ass)
See below:
Sent from my Captivate JP6/JPM modem v6 slim by DocRambone, Xcalibur kernel 2.1.1, Autokiller, no lagfix fix, CM6 email, JPA browser
jhnstn00 said:
See below:
Sent from my Captivate JP6/JPM modem v6 slim by DocRambone, Xcalibur kernel 2.1.1, Autokiller, no lagfix fix, CM6 email, JPA browser
Click to expand...
Click to collapse
Epic. Gonna try it.
Sent from my SAMSUNG-SGH-I897 using XDA App
timur525 said:
Epic. Gonna try it.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
You may want to follow this thread since you will be using JPM modem http://forum.xda-developers.com/showthread.php?t=818981 (talks about other options for modems if you have problems with reception) I am currently studying it for possible changes.
My changes to Doc's v6
1) I also themed with mine with the stock lock, circle battery, and power button options which one member posted found here: http://forum.xda-developers.com/showpost.php?p=8883089&postcount=1700
2) I also use CM6 email which is here: http://forum.xda-developers.com/showpost.php?p=8849671&postcount=1105
3) Browser from JPA is at start of Doc's thread here: http://forum.xda-developers.com/showpost.php?p=8789398&postcount=4
4) Reorient kernel (CWR version zip without BLN) http://forum.xda-developers.com/showthread.php?t=808286
6) Uninstalled apps I didnt need using Titanium
7) Voice Search wasn't working (fc's) fix is here: http://forum.xda-developers.com/showpost.php?p=8883525&postcount=27
May the Force be with you
Why don't you have a lag fix
Sent from my SAMSUNG-SGH-I897 using XDA App
Doc doesn't use then because out is fast way it is. I don't like to hassle with voodoo whet you have to disable brite you flash another rom.
Now moved to jpa. Newly out yesterday so not tested yet.
Sent from my Captivate JPA v7 slim by DocRambone, Xcalibur kernel 2.1.1, Autokiller, no lagfix fix,

[Q] SpeedMod (Vodoo SOund 4) kernel on Captivate (SOUND ISSUES)

Hello guys, I've been searching for a thread already containing this issue but wasn't able to find anything, so this is why I'm creating a new thread.
I have a Samsung Captivate i-897 bought in US..stock Samsung JH2..
I have upgraded to Froyo JI6 and flash SPEEDMOD kernel into my device.
Everything seems to be working fine except for the fact that my voice (on a phone call) seems to be very noisy (metallic) on the other side..I seem to hear very well and if I use the microphone for a simple recording , I hear back perfectly.
So the issue is only related to phone calls.
Any ideas ? I didnt notice anyone else with Captivate having this issue with Vodoo Sound 4.
xxdanielexx said:
Hello guys, I've been searching for a thread already containing this issue but wasn't able to find anything, so this is why I'm creating a new thread.
I have a Samsung Captivate i-897 bought in US..stock Samsung JH2..
I have upgraded to Froyo JI6 and flash SPEEDMOD kernel into my device.
Everything seems to be working fine except for the fact that my voice (on a phone call) seems to be very noisy (metallic) on the other side..I seem to hear very well and if I use the microphone for a simple recording , I hear back perfectly.
So the issue is only related to phone calls.
Any ideas ? I didnt notice anyone else with Captivate having this issue with Vodoo Sound 4.
Click to expand...
Click to collapse
Try firebird2 kernel with JK4 modem, My cappy had issues with speedmod kernel, works great with FB2, I am also using voodoo control for sound
Bust it said:
Try firebird2 kernel with JK4 modem, My cappy had issues with speedmod kernel, works great with FB2, I am also using voodoo control for sound
Click to expand...
Click to collapse
i just having the same problem?
have you find any way to fix?
Bust it said:
Try firebird2 kernel with JK4 modem, My cappy had issues with speedmod kernel, works great with FB2, I am also using voodoo control for sound
Click to expand...
Click to collapse
I'm having problems with the Firebird 2 kernel. It sounds AWESOME when it comes to music, but when I need to make a phone call my voice sounds like I'm calling from inside the Niagara Falls...
Help anyone?
onimurasame said:
I'm having problems with the Firebird 2 kernel. It sounds AWESOME when it comes to music, but when I need to make a phone call my voice sounds like I'm calling from inside the Niagara Falls...
Help anyone?
Click to expand...
Click to collapse
I fixed it!!!! If you are using FIREBIRD 2 you SHOULD MATCH YOUR KERNEL WITH YOUR MODEM!
If you are using SPEEDMOD i9000 you SHOULD MATCH YOUR KERNEL WITH A i9000 MODEM!!!
Check out this thread http://forum.xda-developers.com/showthread.php?t=835272
For me Firebird 2 + Modem ugjk4 = EPIC WIN.
Hi Guys I know is not the same problem but I lose my media sound and system sound yesterday suddenly at that moment I'm Running the Original Samsung /AT&T 2.1 ROM Root & Lagfix I try all the setting and nothing happens and I have tryied change the ROM,I flash CM7 after flash have sound after I start installing the Apps I found that My Captivate have No sound again still have the same problem, anyone any ideas? or help Please.

[Q] Any Kernel work on back camera

I have been using I9000 rom with speedmod kernel and 850 modem for i897 device for a long time.
I installed different kind of i9000's Captivate kernel. None of the i9000 kernel's Captivate work on Tango and Fring video chat. I always get black screen on Tango video chat and Fring always crash when video turn on.
I tested on i9000 rom with Cognition 4.3's kernel and I897UCKB1 modem. The video chat work, but this I897UCKB1 modem is horrible download and upload speed while using video chat. That's why I didn't like to use I897UCKB1 rom because the 3G speed limited by AT&T. If I use any i9000's modem with Cognition 4.3's kernel, the voice call will not work.
I think i9000 kernel for Captivate must disable or remove front face camera function in order to work on Tango or Fring video calling.
Anyone know how to fix this?
Captivates have no front facing camera.
That's why need to disable front face camera on the i9000 kernel's Captivate.
And Cognition 4.3's kernel able to use video calling, but not on any i9000 kernel's Captivate.
They gave a proximity sensor and a light censor on the front that is often mistaken for a camera. As for moderns and kernels, I would recommend reading the modem thread. It will put you on the right path.
Sent from a place my wife doesn't know about (yet)
mrhaley30705 said:
They gave a proximity sensor and a light censor on the front that is often mistaken for a camera. As for moderns and kernels, I would recommend reading the modem thread. It will put you on the right path.
Sent from a place my wife doesn't know about (yet)
Click to expand...
Click to collapse
I'm pretty sure the op knows there isn't a forward facing camera, what he is saying is that the video chat works on kb1 but not on i9000, like the i9000 kernel makes the app look for a forward facing camera and then it doesn't find it and crashes or shows a black screen due to no camera. He wants the kernel to have the app go to the rear camera like it should. Right?
I knew Captivate never have front face camera since I have this phone.
The only problem i9000 kernel still contain front face camera code.
The Cognition 4.3's kernel seen like wasn't or because it is base on Captivate rom.
Either modify or disable front face camera code inside i9000 kernel or use Cognition 4.3's kernel with hsupa enable modem.
studacris said:
I'm pretty sure the op knows there isn't a forward facing camera, what he is saying is that the video chat works on kb1 but not on i9000, like the i9000 kernel makes the app look for a forward facing camera and then it doesn't find it and crashes or shows a black screen due to no camera. He wants the kernel to have the app go to the rear camera like it should. Right?
Click to expand...
Click to collapse
That's what I want!
My apologies. I misunderstood.
Have you tried using the kb1 roms (cognition, fusion, torch ) with existz kb1 kernel? As far as modems, there are only 3 I think for kb1 roms (KB1,JJ4 AND JI6). If the modem doesn't match rom and kernel, weird things happen (no bluetooth, no call volume, static). I hope this helps a little, eden if it doesn't solve your problem.
Sent from a place my wife doesn't know about (yet)
mrhaley30705 said:
My apologies. I misunderstood.
Have you tried using the kb1 roms (cognition, fusion, torch ) with existz kb1 kernel? As far as modems, there are only 3 I think for kb1 roms (KB1,JJ4 AND JI6). If the modem doesn't match rom and kernel, weird things happen (no bluetooth, no call volume, static). I hope this helps a little, eden if it doesn't solve your problem.
Sent from a place my wife doesn't know about (yet)
Click to expand...
Click to collapse
All are Captivate modem (KB1, JJ4, and JI6) worked with KB1 rom except I don't have HSUPA speed which is I don't want to use AT&T modem.
i9000 rom + i9000 kernel for Captivate + i9000 modem: need to fix kernel only use back camera
i9000 rom + Captivate kernel + Captivate modem: everything work except no hsupa speed
im not sure if you will get what you want. it would require a lot of knowledge of the sources and mixing captivate and i9000 sources from a 2.2 kernel and a 2.2.1 kernel. not that it is nessessaily hard, it might be easy for an experienced dev. the devs dont really know till they try but im not sure they will mess around with it. most of the significant kernel work is being done on irc chat and in the i9000 forum, most of it is not i897 centric but latter ported to i897. it may tak a while to get something like this done and after the source for 2.3.3 is realeased im not sure that it will ever get done. problem is that noone requests it. i understand the need for hsupa in combination with video chat. without a 2 way connection hsupa is almost useless. many broadband isp's dont provide an equivilent to hsupa upload speeds. well right now atleast you need to choose between slow choppy video calls on hsdpa or no video calls at all on hspa making hspa fairly useless. what a conundrum
have you tried using a pure i9000 rom and not a captivate port? like strait out of the i9000 forum with a reorient kernel? because they may have something in the settings apk to swap the active camera for that.i dont know for sure though.
edit, forgot but you can triy the ursa minor kernel. it is the i9010 kernel but it is 2.2. there is also the i9088 2.2.1 kernels from kp2 and kp5 but it is hard to find and you might have to settle for a stock kernel in that case.
Dani897 said:
im not sure if you will get what you want. it would require a lot of knowledge of the sources and mixing captivate and i9000 sources from a 2.2 kernel and a 2.2.1 kernel. not that it is nessessaily hard, it might be easy for an experienced dev. the devs dont really know till they try but im not sure they will mess around with it. most of the significant kernel work is being done on irc chat and in the i9000 forum, most of it is not i897 centric but latter ported to i897. it may tak a while to get something like this done and after the source for 2.3.3 is realeased im not sure that it will ever get done. problem is that noone requests it. i understand the need for hsupa in combination with video chat. without a 2 way connection hsupa is almost useless. many broadband isp's dont provide an equivilent to hsupa upload speeds. well right now atleast you need to choose between slow choppy video calls on hsdpa or no video calls at all on hspa making hspa fairly useless. what a conundrum
have you tried using a pure i9000 rom and not a captivate port? like strait out of the i9000 forum with a reorient kernel? because they may have something in the settings apk to swap the active camera for that.i dont know for sure though.
edit, forgot but you can triy the ursa minor kernel. it is the i9010 kernel but it is 2.2. there is also the i9088 2.2.1 kernels from kp2 and kp5 but it is hard to find and you might have to settle for a stock kernel in that case.
Click to expand...
Click to collapse
I just tested GT-i9010 Armani (skullcap-voodoo #11) kernel with i9000 modem. The video back camera work and hsupa high speed work as well, but the wifi is not working with this kernel. It is confirmed this kernel is wifi issue.
lawbo said:
I just tested GT-i9010 Armani (skullcap-voodoo #11) kernel with i9000 modem. The video back camera work and hsupa high speed work as well, but the wifi is not working with this kernel. It is confirmed this kernel is wifi issue.
Click to expand...
Click to collapse
well try the andromeda rom or the ursa minor kernel from andromeda thread.
i really suggest trying andromeda if you are gonna use a 2.2 kernel. not much sense in 2.2.1 without the kernel. andromeda has some fantastic battery life for most users and alot more, i suggest changing the modem though jk4 doesn't work well for me or many other captivate users. calls suck. kp1 and kc1 are two that i can verify work well.
there may also be a kp5 dump around here somewhere with the kernel but you wont have voodoo anything. still you get a 2.2.1 kernel for the captivate with hsupa
edit: http://forum.xda-developers.com/attachment.php?attachmentid=531565&d=1299080836
this should contain a kp5 kernel with voodoo injected in. it was the origonal kernel used in dragon. dont think it has voodoo sound just lagfix
edit edit: http://forum.xda-developers.com/attachment.php?attachmentid=558036&d=1301688592 this is the ursa minor kernel for andromeda built from i9010
sources. as far as 2.2 kernels for captivate go this is the one to have! 2.2.1 may benchmark a bit better but this is a seriously fast kernel with hsupa support. use kc1 modem you will be happy.
Edit 3: I use glitterballs' kernel v.5. It is a pain in the arse but it is jpx/y 2.2.1 like the other i9000 kernels and is working for me on fring with dragon rom. I just downloaded fringe and did a test call. I can see the image from my rear camera in the lower corner. Glitterbslls really knows what he is doing. He needs to come back to the board. If you use this kernel disable all lagfix first and convert to ext4 after to include the /system partition. Also flash with neldars app. You will have problems flashing in recovery because of steam. You can also extract the zimage and .tar it for odin flashing.
Dani897 said:
well try the andromeda rom or the ursa minor kernel from andromeda thread.
i really suggest trying andromeda if you are gonna use a 2.2 kernel. not much sense in 2.2.1 without the kernel. andromeda has some fantastic battery life for most users and alot more, i suggest changing the modem though jk4 doesn't work well for me or many other captivate users. calls suck. kp1 and kc1 are two that i can verify work well.
there may also be a kp5 dump around here somewhere with the kernel but you wont have voodoo anything. still you get a 2.2.1 kernel for the captivate with hsupa
edit: http://forum.xda-developers.com/attachment.php?attachmentid=531565&d=1299080836
this should contain a kp5 kernel with voodoo injected in. it was the origonal kernel used in dragon. dont think it has voodoo sound just lagfix
edit edit: http://forum.xda-developers.com/attachment.php?attachmentid=558036&d=1301688592 this is the ursa minor kernel for andromeda built from i9010
sources. as far as 2.2 kernels for captivate go this is the one to have! 2.2.1 may benchmark a bit better but this is a seriously fast kernel with hsupa support. use kc1 modem you will be happy.
Edit 3: I use glitterballs' kernel v.5. It is a pain in the arse but it is jpx/y 2.2.1 like the other i9000 kernels and is working for me on fring with dragon rom. I just downloaded fringe and did a test call. I can see the image from my rear camera in the lower corner. Glitterbslls really knows what he is doing. He needs to come back to the board. If you use this kernel disable all lagfix first and convert to ext4 after to include the /system partition. Also flash with neldars app. You will have problems flashing in recovery because of steam. You can also extract the zimage and .tar it for odin flashing.
Click to expand...
Click to collapse
I just installed Andromeda 3 rom. The video back camera, hsupa, dial call, and wifi are work great so far. Hopefully, this rom doesn't have any major problems.
lawbo said:
I just installed Andromeda 3 rom. The video back camera, hsupa, dial call, and wifi are work great so far. Hopefully, this rom doesn't have any major problems.
Click to expand...
Click to collapse
we spent a long time on that rom. it started its inception in December and made its debut on XDA in January.....you will be hard pressed to find any REAL issues
if there is a rom to flash and use long term andromeda is it. i had andromeda 1.something for almost 2 months i didn't change the kernel or overclock it and i didn't even have the stock rom for that long. but switched because i was curious about the roms from the i9088. would go back but dragon keeps getting better and i want to see what dagr8 produces for the final release, he was a dev on andromeda. i think the whole andromeda team komin dev group does top notch work.

I897 modem/kernel on I9000 rom.

Quick question, can I use i897 modem and kernel on an i9000 rom?
Just curious.
Sent from my GT-I9000 using XDA App
quick answer is no
CremeFraiche said:
quick answer is no
Click to expand...
Click to collapse
This actually seems logically possible.
If we can use a reoriented i9000 kernel + i9000 modem on a captivate rom, why can't we use a matching captivate modem+ kernel on an i9000 rom?
I thought the important thing is to match the modem and kernel...
Sent from my SAMSUNG-SGH-I897 using XDA App
gstern said:
This actually seems logically possible.
If we can use a reoriented i9000 kernel + i9000 modem on a captivate rom, why can't we use a matching captivate modem+ kernel on an i9000 rom?
I thought the important thing is to match the modem and kernel...
Click to expand...
Click to collapse
You're right. As long as they match it's fine.
Well experimentation if the spice of life.
Sent from my GT-I9000 using XDA App
Did Anyone Try this?
Googler_1976 said:
Did Anyone Try this?
Click to expand...
Click to collapse
Well, accidentally I ended with this configuration:
ROM: Apex 9.2 (JVR)
KERNEL: Talon 4.4.22 (JVR)
MODEM: KH3
Teoretically this shouldnt be happening but everything seems to be working O.K. No Force Closes, WCDMA 850, average battery life, WiFi, etc.
BitteredBro said:
Well, accidentally I ended with this configuration:
ROM: Apex 9.2 (JVR)
KERNEL: Talon 4.4.22 (JVR)
MODEM: KH3
Teoretically this shouldnt be happening but everything seems to be working O.K. No Force Closes, WCDMA 850, average battery life, WiFi, etc.
Click to expand...
Click to collapse
you have always been able to run mix/match, until you need to make an actual phone call. no voice.
BitteredBro said:
Well, accidentally I ended with this configuration:
ROM: Apex 9.2 (JVR)
KERNEL: Talon 4.4.22 (JVR)
MODEM: KH3
Teoretically this shouldnt be happening but everything seems to be working O.K. No Force Closes, WCDMA 850, average battery life, WiFi, etc.
Click to expand...
Click to collapse
Yes I ran that combo until I got a phone call and the other person could not hear me and the volume was cutting in and out flashed back to JL2 all is good again
Running Dlevs 5.0, and latest talon kernel, modem JL2
As you can see from my signature I am still running 2.2 ROMs. I just prefer the stability, and have zero issues with both that I am using now on different captivates. One of them, Continuum 4.1 is and i9000 rom, using Onyx kernel with jk4, the other is the i897 Cognition, cog kernel, kb1.
I think, based on what I am reading here, I will try to intall the i897 modem and kernel on the Continuum 4.1 ROM. I really like this ROM but REALLY prefer the sound quality of the i897 roms because of the Audience chip.
I will experiment this weekend and report back. As of now, I prefer not to do this kind of experimentation with the GB roms. Anyone else interested in seeing how this turns out?
jack man said:
As you can see from my signature I am still running 2.2 ROMs. I just prefer the stability, and have zero issues with both that I am using now on different captivates. One of them, Continuum 4.1 is and i9000 rom, using Onyx kernel with jk4, the other is the i897 Cognition, cog kernel, kb1.
I think, based on what I am reading here, I will try to intall the i897 modem and kernel on the Continuum 4.1 ROM. I really like this ROM but REALLY prefer the sound quality of the i897 roms because of the Audience chip.
I will experiment this weekend and report back. As of now, I prefer not to do this kind of experimentation with the GB roms. Anyone else interested in seeing how this turns out?
Click to expand...
Click to collapse
Hi Jack man,
if you are still considering flashing i897 kernel & modem , my captivate is still Froyo 2.2 stock (rooted), with the uckb2 modem and kernel 2.6.32.9. I already have a dump of the kernel (I checked is working) and could send you a dump of the uckb2 modem (unchecked, I'm unsure about flashing this one back, since I have the 100% battery shutdown issue and still considering a RMA) if you are willing to try.
Let me know,
Angel
Well, I experimented. Here's what I used and how it went.
I installed Continuum 4.1 (a froyo 2.2 rom) then flashed the Exist kb1 kernel along with the kb1 modem. I thought everything was going to be fine. Calls worked fine, data seemed ok but slower than I was expecting, but when I went to turn on wifi if just didn't work. I made sure it was't the router - my wife's phone was working fine on the router, along with a laptop on it.
it would also not connect to the neighbor's router either. Flashed back to Cog4.5.3 - wifi worked fine.
Too bad, because I really like the small features of Continuum 4.1
If anyone has any ideas to fix the wifi in this setup let me know. I would love to keep it.

[Q] Stable GM ROM? Opinions?

Hello,
I am looking for a stable GM Rom with everything working for a friends Galaxy Mini.
I will not be home for several months so he will not be able to modify smth as she doesn't know how to flash Roms etc.
Thanks in advance.
The Gxy Mini is on Stock 2.1. Anything special i should know before flashing?
I believe you first have to upgrade to Gingerbread before flashing custom roms. Also, install clockworkmod recovery via Odin before flashing custom roms.
That's about it really.
A pretty nice rom that sticks close to default is Chocobread. (Current emanom is too buggy right now, although v6 is in the making).
. Installed Stock 2.3.6 then Creed's Rev. 1.3. Interesting that the contacts didn't sync from 2.1. Then, (didn't checked on PC before) i found out that i have no phone contacts on the Google account although i synced them on the old 2.1 before wipe.
Creeds ROM feels laggy than stock 2.3.6 somtimes. I overclocked it to 710 mHz. Angry Birds Space doesn't load past the "Space birds" loading screen.
I told her to test it for a few days but i consider other options?
mebitek's cm7 rc 1 or kitten's cm7 base on mebitek's deodexed or MORe v3
i would recommend Stock ROM!
Deonix said:
Hello,
I am looking for a stable GM Rom with everything working for a friends Galaxy Mini.
I will not be home for several months so he will not be able to modify smth as she doesn't know how to flash Roms etc.
Thanks in advance.
The Gxy Mini is on Stock 2.1. Anything special i should know before flashing?
Click to expand...
Click to collapse
If your friend is not a techno wiz then i would suggest why don't you flash stock rom.
Read this post by anno08:
http://forum.xda-developers.com/showthread.php?t=1551586
Theres no risk of bricking.You may even root this stock rom using odin if you wish or even flash cwm.
Hit thanks if it helps!

Categories

Resources