G1 screen suddenly has dead spot. Do I need a new screen? - G1 Q&A, Help & Troubleshooting

Apart from some sound issues that were resolved, my G1 was working perfectly until now. I installed some apps then turned off the phone. A while later, I come back to the phone and turn it on but now the upper half of the touch screen won't respond. It was working fine just 30 minutes ago! What can I do? Do I have to get a new screen for it?

Related

Touchscreen Not Responding / Malfunction

I've been using my HTC Diamond for about 2 weeks now.
Bought it from www.plemix.com and it came unlocked , and I had no trouble at all using it and installing the HardSPL's / updating ROM (Dutty's Diamond v1.6) .
Today I ran the TomTom Navigator 7, and after a while it started to make continuous sound - the default sound when a button is pressed or touchscreen is tapped- , so I did soft reset a few times, didn't solve it, touchscreen was kinda jammed, and I took out the battery. A minute after I put it back, and it worked fine, I took some photos right after, and everything was working fine.
Then two hours later, I took out my phone from pocket to check the time, I see it's halted on the photo screen, and no response at all. So I just turned the phone off by taking out the battery, and just left it off until I came home.
Now the touchscreen is not responding to any taps or clicks, except that it seems that it still detects any sort of tap/click, because the backlight comes on from dim state when I try to tap it.
So it definitely means the touchscreen is not completely dead, but it's just not functional most part.
Hardware buttons works fine, but I'm stuck at the initial "Tap your screen to begin configuring your Windows Mobile" after hard reset. I even updated the ROM to Dutty's Diamond v1.8 just now.
Since I can't do anything and just leave it idle, it goes to [ Align Screen ] page, and still I can't press any cross, since the touchscreen is completely not responding.
Anyone had this screen death problem? Any method of solving it?
---Updated---
Just now the touchscreen worked for 30 seconds, i could actually align the screen, then it showed me the Date/Time setting page, where I could scroll the cities , but then it stopped working again. So i'm still at Date/Screen page...
--Updated--
The touchscreen works for 2 minutes after I do a soft reset / power on&off, or I should say, it works until you press some hardware key on the bottom (volume up/down buttons doesnt affect this).
After I press any of those buttons at the bottom, the touchscreen stops working.
Also, after I turn on the device, enters WM, and runs TouchFLO3D, for the entire time touchscreen works, it's constantly pressing the tasklist dropdown (upper right corner of the screen), making it constantly pop down the task list.
have you tried a hard reset?
Yes, like 3 times. Wiped everything, OS, ROM, NANDFlash.
Also updated the ROM from 1.6 to Dutty's 1.8 ROM. Everythingn works fine except for the Touchscreen.
Right now, when I turn on, the touch screen seems to be pressing all the time at the task manager part of the screen (where the [X] is), its popping up all the time the task list, then after a while, like say, 2 minutes, touchscreen again ceases to work.
Not really promising, but you could try to remove the screen-protector. Perhaps this releases any tension onto the screen.
Thanks. I've thought of that, maybe I'll try later on.
For now i'm suspecting that maybe water went in through, so I've put the phone upside down to maybe take out the water using gravity for 2 days.
It seems like it's working better now, with longer hours of normal functioning..
I'll wait and see one more night... if water is the cause of the problem, it should dry up in say 3-4 days.
It may sound strange, but pit it face down on the carpet and rub it around for a while. Its how I fixed mine. Don't ask me why it works but I had the same thing happen. I think somehow the electrical charge got dissipated from the screen and the static from the carpet recharged it.
Actually your words makes a lot of sense
My Diamond was acting completely alright today, used GPS for 2 hours and called a few people along with many weather updates.
Seems to be working fine now...
But I think what you said is pretty reasonable, since when I rubbed my dead screen , after a few rubs it started to work (2 days ago).
Thanks
yeah this had happened to me about a week ago exactly the same thing I had hardspl mine and updated radio to .05 and then a few days after I had the identical problem. However I took a shortcut and sent the phone back in and requested a replacement claiming it was defective they agreeded and sent a new one however this one already has .05 radio on it so I didn't have to hardspl it. I can't say any of these things would have worked form me as I did not try them byt symptoms are identical. my .02

[PROBLEM] Died?

Hey guys, I was wondering if somebody would be able to maybe help me diagnose the fault\problem part with my non-working diamond...
Basically I went to a club one night and the place was unbelievably steamy / humid. My phone was working one minute and then the next it wouldnt display anything on the LCD. The backlight was working however.
Since then I havent been able to get an image on the screen although when trying to turn it on, it seems to go through its startup sequence (backlight -> vibration -> beep (i think))
I havent had any power to the phone since a day after it broke (a few weeks ago).
I'd like to get it back working again but dont know exactly what part i would need to replace. I'm fairly competent with electronics .
Any help/advite would be appreciated!
Haha, ok that's odd...
I've plugged it into my pc to get some data files off about an hour ago.. forgot about it and just looked at it now and the screen is displaying!
It is displaying and accepting input although it was flickering at first (like pixel shifting). but i pressed the power button to standby the screen and pressed it again and the display is fine with no flickering ?
Ive moved the phone about and shook it quite hard to see if there's any loose connection but the display still seems fine..
Anybody have any ideas as to what it may be?
I'm not going to deem it as fixed until I know what the problem was/is lol
cheers guys
Ok screen actually keeps flickering nonstop, and sometimes 'fades away' to gray/white/black
comes back after a few seconds though
Looks like a faulty connector?

screen broken?

Hey guys, from last night to this morning my N1 started having problems with the screen, it didnt have any fall or anything.
The screen doesnt work for most of the times.. Some times when i wake it up it works for a few mins and then goes black. It looks like a bad contact on the screen conectors or something like that. The touch screen works fine, i can unlock the phone when the screen is not working by sliding.
I got the phone back a few weeks ago from the repair service for a rigid-flex repair, so maybe they missed a screw or something.
Anyone had same problem or knows what may be happening?
Thanks!
Running CM7 nightly but i guess it doesnt matter.
well, now the screen works if i press it hard in the middle of the screen, if i release it goes black.

Broken screen - but not cracked - warranty

Hello guys,
i have a problem with my S5 Mini G800F, 2 or 3 weeks ago its started to get something like deep sleep but in fact notification LED was working all the time, after reboot it was working again. Couple days ago screen was black even after reboot (no samsung logo visable, only blue-cyan booting LED), then i realized that when i push screen with finger near the front camera, screen start working, but of course only with that finger pressed
There's my question, warranty services will fix that? Even if is a new rom on it? (Official 5.1.1) I hope not becouse its not soft side problem. I think that connection between motherboard and screen just disconnect and thats why it's stop working.
Thanks for help! :highfive:

screen goes black and touch still working

Hey there
I have an Asus rog phone 2 from last 3 months and it was working quite good but today I was using my Gmail and after 5 to 10 mins of use I locked my phone and put it on the table and when I opened it again after 5-6 mins its screen was showing black each and everything is working but the screen is black and I am not able to see anything whats going inside the phone. as it sometimes shows little bit screen at the bottom of the screen but sometimes its shows full black I don't know what's the problem as the phone screen is perfectly ok without any damages or scratches each and everything thing looks good but why this is happening ? does my phone will be cover under warranty by Asus as I don't think its any kind of physical damage so please let me know about the same
do you have double tap to wake on? I have found that helps.

Categories

Resources