Database Develop

BRICK - QMobile, Orange, hard spl'd ???

....before anyone moderates my ass i wasnt sure whch forum was the appropriate one for a bricking!
****
My phone seems to have given up the ghost. A few days after having put on the excellent Q-Mobile system. My phone has refused to boot properly. Heres what happens:
In start up from Soft reset, or Power off, i get the tricolour screen saying:
KAIS130 MFG
SPL-1.0 OliPof
CPLD-8
a few2 lines benath that is written 'Serial'
it then flashed onto a white screen saying 'loading......no image file' - this all takes about a second.
And then it rests on the screen mentioned above.
I haven't dropped it or done anything other than flash- correctly.
AAAARGH! it does randomly decide to boot up properly after its been left of for a whil if that helps.
Also - active synch wont recognise it , in the tr-colour state.
HELP!!!

Phone now stable
wondering what the best thing to do is to get it back on track...

i had same issue read the link to my post
http://forum.xda-developers.com/showthread.php?t=352859
mtty worked for me then i reflashed its worth a try i guess

kishorvalji said:
i had same issue read the link to my post
http://forum.xda-developers.com/showthread.php?t=352859
mtty worked for me then i reflashed its worth a try i guess
Click to expand...
Click to collapse
mtty is the way to do...you are not bricked...just take a few breaths and search the forums. When it happened to me, I had to use the BOOT command with MTTY. After it boots back up, run HARDSPL once again otherwise anytime you soft reset it will return to the bootloader screen.

thanks, but what is MTTY - i checked the posts and couldn't find it anywhere

Urgent help needed!

ok i have a major problem i was updating the radio and it stalled on 95%. SO i restarted it at the bottom with the soft reset and now my phone wont get off the three colour BL screen. i need help bad please help. I am currently using a HTC TYTN II

if anyone has any help at all i have nearly given up I have no idea what to do when i try to reflash it it wont go past 0% on the installation!

please if anyone can as I need this working for when I leave for work tomorrow morning .........

Did you try a search?
Click Me
I think you may have a long night ahead of you...

Have tried installing different ROMS but still no luck it wont budge past 0% once the installation starts and it then fails.....

Then go to the upgrading sub-forum, do a search on bricked. See if any of the results help you.

Well, since your stuck in the bootloader (tri-color) mode, make sure that you've HardSPL'd your phone. At the top left it should say "SPL-1.0.OliPof" in one of the lines in the upper left corner of the bootloader (tri-color) screen. If it does, you've HardSPL'd. If not, go here and follow the directions. After successfully putting HardSPL on the phone try reinstalling the radio.
Also, redownload the radio you're trying to install. It may have been a bad download.

Same problem
KMFM$ said:
Well, since your stuck in the bootloader (tri-color) mode, make sure that you've HardSPL'd your phone. At the top left it should say "SPL-1.0.OliPof" in one of the lines in the upper left corner of the bootloader (tri-color) screen. If it does, you've HardSPL'd. If not, go here and follow the directions. After successfully putting HardSPL on the phone try reinstalling the radio.
Also, redownload the radio you're trying to install. It may have been a bad download.
Click to expand...
Click to collapse
I have the same problem stuck in bootloader with HardSPL installed and the top left shows SPL-1.0.OliPof.
How can i install the radio if the Activesync doesn't recognize the Kaiser?

HELP :((

I just got a att tilt.. I have tryed to unlock it using the kaiser sim unlocker. At first it would just go to the load screen and it would say 0%... a white screen. so i looked for a posting with that. And i found this ------HardSPL will not install - WHITE SCREEN: SOLVED (UPDATE 01. March 2008)-----
on that i got all the way up to 95% and then I got a err message.. now all it will do is go to the load screen (white) and show 0% and then I follow the instructions.. and when I go to restart the phone it show the red,green,blue,white screen.. top left show
kais1*0
spl-1.56.0000
cpld-8
top right show
ruunbh
what happen please help.. this is the first time this ever do this to me.. i have ren unlocked programs from hear befor with np..

bikepilot said:
I just got a att tilt.. I have tryed to unlock it using the kaiser sim unlocker. At first it would just go to the load screen and it would say 0%... a white screen. so i looked for a posting with that. And i found this ------HardSPL will not install - WHITE SCREEN: SOLVED (UPDATE 01. March 2008)-----
on that i got all the way up to 95% and then I got a err message.. now all it will do is go to the load screen (white) and show 0% and then I follow the instructions.. and when I go to restart the phone it show the red,green,blue,white screen.. top left show
kais1*0
spl-1.56.0000
cpld-8
top right show
ruunbh
what happen please help.. this is the first time this ever do this to me.. i have ren unlocked programs from hear befor with np..
Click to expand...
Click to collapse
It shows you are using the 1.56 SPL, which is the Stock AT&T SPL.
Download the official AT&T 6.0 Shipped Rom here:
http://rapidshare.com/files/55298724/RUU_Kaiser_CINGULAR_WWE_.exe
Take out your SD card and flash this ROM. After you have a successful flash and your phone boots up normally, post back and we'll go from there.

bengalih said:
It shows you are using the 1.56 SPL, which is the Stock AT&T SPL.
Download the official AT&T 6.0 Shipped Rom here:
http://rapidshare.com/files/55298724/RUU_Kaiser_CINGULAR_WWE_.exe
Take out your SD card and flash this ROM. After you have a successful flash and your phone boots up normally, post back and we'll go from there.
Click to expand...
Click to collapse
Ok I tried that it go to 1% and then it go to say
ERROR[294] : INVALID VENDER ID
this update untility cannot be used for you pda phone pleas check you Update utility

bikepilot said:
Ok I tried that it go to 1% and then it go to say
ERROR[294] : INVALID VENDER ID
this update untility cannot be used for you pda phone pleas check you Update utility
Click to expand...
Click to collapse
You could try this
More specifically, might want to read this whole thread and search it for RUUNBH.
MTTY should be able to help as long as you use the proper commands.

bengalih said:
You could try this
More specifically, might want to read this whole thread and search it for RUUNBH.
MTTY should be able to help as long as you use the proper commands.
Click to expand...
Click to collapse
Ok got it back to all origanal...now every time i take the battery it go back to the colar screen ( now what

My tytn II do not want to boot

hello!
I am new here and i got one big problem.
So please help me!
I tried to flash my tytn II with this rom(ENDED- 28/V/2009 Anryl WM⑥.⑤ 21725 FINAL ULTIMATE(101RAM) -ENDED- ), but when i finished the flash, my phone want to boot. It stops on black screen and show "HTC"
If someon know how to fix it, please help me!!
R 1.27.16.21
G 22.52.88.13h
D 3.34.00.00

did you flash jumpspl and hardspl first?

Yes i did.
I did everything like it said in http://forum.xda-developers.com/showthread.php?t=433835 and my phone is stuck in bootloader. So how can i reflash it? i tried to flash it again with sd card but when i use power + camera + stilus to get bootloader, in a second there is a white screen where is written that there is no image, and it go back to three color screen mode, and in the bottom is a white screen where is written "serial"
When i try to flash it with activesync there is an error 262. I spend a lot of time reading many posts here, but i did not find enything what help me.
Any sugestions?
Thanks!

Bro, did you solve it? please let me know. Same issue and as described in the faq's tried using MTTY but that one also does not connect.

Stuck on bootloader screen!!! Help!!

I've been waiting for hours for someone to help me and I searched and searched, I can't find any help!!! I have to go to work soon and I've been on this screen since 7:30AM EST!
Looks like I'm stuck at the boot loader screen and it goes back to it when I do a soft rest. I can't do a hard reset since I can't turn off the phone.
I think it's the bootloader screen.
Says RUUNBH on the top right corner and the screen is red, green, blue and white which these codes or whatever.
Took the battery out for a few and it went right back to that same screen.
Can someone help me bring back my Rhodium to stock???
EDIT: I might of posted this in the wrong section. Should this be in Rhodium General?
*UPDATE*
ark666 found the stock rom for T-Mobile HTC TP2 and I did a flash to get it back! Thank you so much ark666!!!

Flash stock rom.

I have no idea on how to do that, I searched how-to's but I can't find any full instructions or where to get the stock rom for T-Mobile HTC TP2.

This is the worse ever!!! Somebody please!!!
Isn't this the best site for things like this?

Try a manual hard reset? The instructions should be in your manual.

It says while the phone is off to HOLD SEND/END key with the power until the message comes up. The phone wont turn off unless I take out the battery for me to do a hard reset.
EDIT: I took the battery out then put it back in. The phone is now off, I hold the buttons and did the hard reset. It went right back to the boot loader screen.

hi,
what happend after you hard reset the device?
regards,
twisted

Asked me to press the VOL UP button to reboot. I did and it went right back to the boot loader screen. A flash happened on the screen when I try a soft reset and it says really quickly!..."NO IMG FILE" then it goes back to the 4 color screen.
EDIT: Image below on how my screen is since 7:30 AM EST!!!

on some device, active the RUU, connect it to PC & press soft reset button (the one in side the battery cover).
don't know if it help, just try that
good luck

Thanks for the reply, but that was the first thing I tried. Looks like I will have to go to work with no phone! This is crazy on how this can't be resolved.

Looks like you've basically erased the flash I'd say...
If you can get the t-mobile image, then try flashing that back to the device... If you connect a usb cable to your device, at the bottom, where it says serial it'll change to usb...
Or, if you have a goldcard, maybe try installing another image. But I'd say you're best to install the t-mobile image if you can get one?!

Ok so where can I get an image that will work on my phone? I also will need instructions on how to do it properly.

HeavyComponent said:
Ok so where can I get an image that will work on my phone? I also will need instructions on how to do it properly.
Click to expand...
Click to collapse
Where are you from? Can you find the rom on your tmobile site?
Or, creat a goldcard, copy the RHODIMG.nbh into the root of the card and try flashing that...?
As far as I know, your device is not bricked, you simply need your original supplier rom...

I replied to the PM (basically do set 16 0 command in mtty)
but I see your photo now - you have 0.85.1000 SPL? that's mfg SPL so if "set 16 0" did not help (you didn't describe what you did to the phone when this happened), you can just take any official rhodium ROM and flash it
sorry if I misread your photo... quite blurry

Ok that's my main problem that I've been having. Where can I get an official Rhodium ROM and how do I do a flash? I've been searching all morning.
And yes 0.85.1000, that's what it says on the screen.
I tried to this ROM...Link: http://forum.xda-developers.com/showthread.php?t=548546
Did the goldcard, but I think I did it wrong. I added the RHODIMG to the SD then tried to update my TP2. That's when I got an error saying it's not for PDA and how I need to update my utility.
I got the steps to do the goldcard correctly, I just want to take another shot at updating this ROM.

lovelldr said:
Looks like you've basically erased the flash I'd say...
If you can get the t-mobile image, then try flashing that back to the device... If you connect a usb cable to your device, at the bottom, where it says serial it'll change to usb...
Or, if you have a goldcard, maybe try installing another image. But I'd say you're best to install the t-mobile image if you can get one?!
Click to expand...
Click to collapse
hard reset doesn't erase the OS image.

HeavyComponent said:
Ok that's my main problem that I've been having. Where can I get an official Rhodium ROM and how do I do a flash? I've been searching all morning.
Click to expand...
Click to collapse
see my PM first, maybe set 16 0 will be enough.
is your SPL version really 0.85.1000? how did you get this phone? what happened when it got stuck on bootloader screen?
as for flashing, see xdadev wiki on rhodium.

Ok, will try what you PMed me. Brb!
It says 0.85.1000 on the screen so I guess so and I got it from T-Mobile. Ordered it through Customer Service.
post #15 has been updated to let you know what I was trying to do.

HeavyComponent said:
Ok, will try what you PMed me. Brb!
It says 0.85.1000 on the screen so I guess so and I got it from T-Mobile. Ordered it through Customer Service.
post #15 has been updated to let you know what I was trying to do.
Click to expand...
Click to collapse
then the set 16 0 will work just fine
weird the rom didn't work though

I have just flashed the 6.5 rom which you flashed
It does change the spl to 0.85 and i have the exact the sameimage which you have shotted during the flash process. But the process of this rom's flashing has two stage, it will restart after first 10% and show up the image which you shotted and upload, and continue afterwards. i guess ur goldcard has the problem so it stops and stucked there. Try other sign roms would be a better solution.