Related
hi, i've a big problem, i've upgraded my phone today, because it was a mda3 german locked on t-mobile. but the only way to make the upgrade work was not to upgrade radio, so i didn't put it. so, now the phone has been updated in my language, but when i power on it, it says no gsm. can someone say how can i do please!
Which rom did you flash? What is written after letter R while doing a soft reset?
no r
it does not appear anything, the only thing is that
NO GSM
D 5108.a771la
are you sure it's not a CDMA phone? ( j/k)
try reflashing the old rom. and see if it will go back.
if not...
then you are forced to flash the radio rom to a new version
because as you say it cant detect any if you flashed with the new rom.
but i dont see any relevance to the carrier when upgrading the radios, it's still quadband.
and you're stil using the SAME sim card.
hi, i still cannot reflash the radio of my phone, anyone can help me it always says "NO GSM" !!! PLEASE, HELP ME!!!!
please, tell me also if there is a way to format the memory where is installed the radio. thanks
jonnymix said:
hi, i still cannot reflash the radio of my phone, anyone can help me it always says "NO GSM" !!! PLEASE, HELP ME!!!!
please, tell me also if there is a way to format the memory where is installed the radio. thanks
Click to expand...
Click to collapse
As far as I know, the only way to 'format the radio stack' is to flash it with a new radio version.
Your original post is too vague as well.
You have a MDA III from T-Mo, that would make it a GSM = good
"only way to make the upgrade work was not to upgrade radio" - This doesn't make sense as the radio ROM is a separate flash from the OS ROM, the two are not part of the same flash code.
You also 'upgraded' your phone. From what to what? We need to know where and what ROM you flashed the phone to and from.
As for the screen showing NO GSM, is this after power cycling the phone by removing the battery? There is a know bug with WM5 and above where the GSM radio stack is not loaded on boot after a power cycle. The workaround is to soft reset the phone after it shows NO GSM.
(Huh, I'm a senior member now? Wonder when/how that happened... )
hi, thank you for answer.
i dont exactly know which os and radio rom were originally, i bought it original but used and the os was modded by t-mobile in deutch. i upgraded it to wm5 a771la ver 5.1.0.8 and the radio 1.15. then the os worked properly but it says no gsm. i know the bug you said me, because i have it on an another mda III of my brother, there after a soft reset i can solve this problem but it says NO RADIO on two lines, there, there is only one NO GMS . i know that the two roms are in two different flash memories infact i can flash and re-flash the os but when i try to flash the radio an error occurs. please, let make me know if these information can help you to solve my problem. thanks!
jonnymix said:
i know that the two roms are in two different flash memories infact i can flash and re-flash the os but when i try to flash the radio an error occurs. please, let make me know if these information can help you to solve my problem. thanks!
Click to expand...
Click to collapse
And what error is appearing? I didn't see it in your original post.
Personally, I'd try this:
Remove the SIM and any SD cards.
Make sure the battery is fully charged.
Put the phone into boot loader mode
Plug it into a XP (Not Vista) machine
Check to see if the OS recognizes the phone. I believe it will show up as some kind of USB device, not a Generic RNDIS device (I don't have my angel handy to check this)
Then run the radio flash program.
jdc said:
And what error is appearing? I didn't see it in your original post.
Personally, I'd try this:
Remove the SIM and any SD cards.
Make sure the battery is fully charged.
Put the phone into boot loader mode
Plug it into a XP (Not Vista) machine
Check to see if the OS recognizes the phone. I believe it will show up as some kind of USB device, not a Generic RNDIS device (I don't have my angel handy to check this)
Then run the radio flash program.
Click to expand...
Click to collapse
i also have the same problem...how to resolve?upgrade helmi 5.6 rom... NO GSM. phone funtion failed.
Firstly...I'm with 3 in Australia
Ok, bought a TYTN II off ebay some months ago now from a Hong Kong dealer (that'll learn me) and it seems to not work with the 3G network here in Australia. The phone is always EDGE roaming and whenever it switches to 3G I can't send or receive SMS messages.
I've done some reading around and found that maybe I need to flash the ROM of the phone to an Australian one so that the phone will work properly. I found a thread on Whirlpool and someone there posted a link to this ROM for another user:
www.mediafire.com/?0jt1cwyx61g
Is that the ROM I want? If so, how do I go about flashing my phone with this ROM to make it work?
Can anyone help me??
You're more than likely having issues with the radio that came with the phone. Go to the ROM development forum, read how to unlock, install HardSPL, etc.. and then choose either one of the ROMs that come with a new radio available: NATF, Hyperdragon, Dutty's, etc... or look at one of the threads that show how to install a new radio. I'm not going to make any ROM recommendations, because it's really a matter of personal taste and how the ROM feels to you. For me personally, I've settled on T.i.R vk8 WWE build 19971. And I have radio version 1.58.25.17.
Hey dude,
congrats on the kick-ass new phone.
To help you with your prob, you'll have to signup and login to HTC E-Club for Australia, then download and flash the latest 3 ROM. Its the only way to ensure you have the correct inbuilt three network settings, there was a cab floating around a while back but it didn't include planet3 connectivity - only mobile internet.
look for this one :
HTC TyTN II WM6.1 ROM code for Hutchison ‘3’ Network customers
ROM version: 3.29.861.0
ROM date: 05/15/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
Date: 2008-06-02 Category: ROM Upgrade
I found the ROM development page and the list of radios that relate to the specific ROM's match the ones I already have (note: I already flashed my phone using the one in the link I provided in my first post).
I went and registered for HTC E-Club and went to download the WM6.1 ROM u mentioned Sanchez and when I entered the Serial Number it says the ROM is unsuitable for my phone. Is this because it is NOT an Australian phone?
Would this ROM actually work on my phone and would I be able to get a copy of it from somewhere else?
yeah, its not the actual ROM so much as the stuff Three bundle within that you need.
I'm aka Dr.Nerdlinger on whirlpool, a guy I recommended this to didn't have any problems, seemed to make his US Tilt into an Aussie Three TyTnII.. Havent tried it myself as Im already three branded.
http://www.andrewjstevens.com/2008/06/a-new-att-tytn-ii-tilt-by-htc/
from : whirlpool thread
How did you go Morphio, did that link help out any ?
Umm nah, I've also tried a much newer 3.29.861.0 ROM and that didnt help.
I dont know what to do
Morphio said:
Umm nah, I've also tried a much newer 3.29.861.0 ROM and that didnt help.
I dont know what to do
Click to expand...
Click to collapse
I have the latst official shipped TyTnII 3 ROM (WM 6.1) for Australia.
ie:
TyTN II_AUS Hutch_WM6.1_Upgrade_20080602 (may 2008)
Can't recall where I found it. I am fairly certain it was on this site
If you cannot find it through searchLet me know if you still need it.
Official 3 ROM
Morphio said:
Firstly...I'm with 3 in Australia
Ok, bought a TYTN II off ebay some months ago now from a Hong Kong dealer (that'll learn me) and it seems to not work with the 3G network here in Australia. The phone is always EDGE roaming and whenever it switches to 3G I can't send or receive SMS messages.
I've done some reading around and found that maybe I need to flash the ROM of the phone to an Australian one so that the phone will work properly. I found a thread on Whirlpool and someone there posted a link to this ROM for another user:
www.mediafire.com/?0jt1cwyx61g
Is that the ROM I want? If so, how do I go about flashing my phone with this ROM to make it work?
Click to expand...
Click to collapse
Dude... found it in seconds on google
Link to the ROM download
http://www.megaupload.com/?d=7J3L5LEE
I have flashed this ROM anytime I've had problems with others and it has always worked.
One question though, did Juvs Network Wizard not find 3 for you or it failed in some other way?
Congrats on your purchase and hope get as much out of it as I have
MaDing2000 said:
I have the latst official shipped TyTnII 3 ROM (WM 6.1) for Australia.
ie:
TyTN II_AUS Hutch_WM6.1_Upgrade_20080602 (may 2008)
Can't recall where I found it. I am fairly certain it was on this site
If you cannot find it through searchLet me know if you still need it.
Click to expand...
Click to collapse
This is the same one I used (3.29.861.0) and nothing seems to have changed, still doesnt register on 3G network
Morphio said:
This is the same one I used (3.29.861.0) and nothing seems to have changed, still doesnt register on 3G network
Click to expand...
Click to collapse
Damn! Sorry...
The ROM I posted the link to doesn't ask me for a "serial" when I've flashed it..
I assume you have run the Connection Setup wizard (Settings > Connections > Connection Setup?
Have you tried to manually enter 3's settings?
Perhaps flash the latest Hyperdragon III http://forum.xda-developers.com/showthread.php?t=397121
It has a suitable radio for Australia and I flashed this recently on a TyTn II purchased in Malaysia and all worked fine (as did the ROM I referred to earlier)
Ok but to flash to that (being a cooked ROM) dont I have to do something before I can flash to that? Is it HardSPL I have to install or something like that?
Yes... Unlock and flash a hard spl...
It is quite easy
Excellent directions here:
http://forum.xda-developers.com/showthread.php?t=356895
I am in no way an expert with these devices but I have had no problem that hasn't been quickly resolved.
perhaps unlocking the phone may resolve your problem with flashing the 3 shipped ROM.... (again, no expert here)
Ok seems this is not gonna work. I've done some reading and apparently the board it to blame for my phone not working properly. Since it was an eBay job (but from a company) I can still get warranty but I have to send overseas to HK.
What do people think, I can buy a new TytnII for $659 and when the old one comes back from warranty I can sell it. Would the new one (if I bought from Australian store) work on 3G?
Unless it's faulty hardware, it shouldn't need a return. Don't spend your cash just yet
Try this new official 3.34.721.2 WWE HTC rom, with 1.70 radio.
Download it, plug your activesync cable in, run the exe file you downloaded - after 20 mins or so, you should have the latest ROM, with built in Aus Three Network detection (assuming you have a legal 3 sim-card)
(ps. it may seem like its stalled while flashing, but just give it time)
Report back if successful
Downloaded and installed last night - doesnt seem to have made any difference
sigh...
Morphio said:
Downloaded and installed last night - doesnt seem to have made any difference
sigh...
Click to expand...
Click to collapse
After Flashing a ROM you should always hard reset the device as well. After all this is done, what versions of the following are showing as being installed: ROM, Radio, SPL (can find the last one in the tri colour boot screen - read the wiki if you need to know how to get to the boot screen)? If all of this is showing correctly and you're still having problems then it's probably something like the sim (just any old sim won't do and it needs to be compatible with the phone). You could try another if you have a spare. When you switched it on, after a minute or so did you get a message popping up asking if you wanted to automatically configure the phone for your networks settings?
hi,
i got oner htc hd i hard spl it and the upgrade it to windows 6.5 all was working fine but it hangs a lot the i flashed it with windows 6.1 rom then the problem came was that all is working fine but i am unable to turn phone on to acess network on phone then i updated it ti the same rom i firstly used the problem was same then i update its radio then also problem was not solved then i update it other 6.5 rom but the problem is same phone doesnt turn on so that i cant acess network plz help me its very urgent for me
Are you sure the hspl update was successful? What spl version is currently showing on your device?
yes hspl was successful
manbir said:
yes hspl was successful
Click to expand...
Click to collapse
What spl is showing?
manbir said:
hi,
i got oner htc hd i hard spl it and the upgrade it to windows 6.5 all was working fine but it hangs a lot the i flashed it with windows 6.1 rom then the problem came was that all is working fine but i am unable to turn phone on to acess network on phone then i updated it ti the same rom i firstly used the problem was same then i update its radio then also problem was not solved then i update it other 6.5 rom but the problem is same phone doesnt turn on so that i cant acess network plz help me its very urgent for me
Click to expand...
Click to collapse
Perhaps you could give a bit more information about your issue. Interesting would be:
do you get the window to enter your pin?
and do you get any error message?
Matthes42 said:
Perhaps you could give a bit more information about your issue. Interesting would be:
do you get the window to enter your pin?
and do you get any error message?
Click to expand...
Click to collapse
i dont get any error and it is also not asking for any pin
its hspl is 1.56 olinex
Ok, so you have the right spl, so that is not the problem. To understand you, you say that you can not activate the phone? Does the phone stay in flight mode? If you go to Settings (Manila tab)\Wireless Controls and turn the Phone slider on, does it turn itself off again?
You can try to run the setup again. Go to Start\Settings (All Settings)\Connections\Connection Setup and make sure your Country and Operator are correct and press Ok to setup.
ClydeB1 said:
Ok, so you have the right spl, so that is not the problem. To understand you, you say that you can not activate the phone? Does the phone stay in flight mode? If you go to Settings (Manila tab)\Wireless Controls and turn the Phone slider on, does it turn itself off again?
You can try to run the setup again. Go to Start\Settings (All Settings)\Connections\Connection Setup and make sure your Country and Operator are correct and press Ok to setup.
Click to expand...
Click to collapse
am unable to turn the phone on rest all settings of country operator also ok
Is your device perhaps not SIM locked? What rom did you have originally? Have you tried to reflash to that original version and see if the problem is resolved.
When you first flashed to the 6.5 rom did the phone work then? I know you say you had lots of freezes, but before that did the phone work on the 6.5 rom?
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
miniterror said:
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
Click to expand...
Click to collapse
yes i flashed back to 6.1 but phone is not provide locked its phone is not turning on and i have cheked that all sims were working fine
miniterror said:
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
Click to expand...
Click to collapse
manbir said:
yes i flashed back to 6.1 but phone is not provide locked its phone is not turning on and i have cheked that all sims were working fine
Click to expand...
Click to collapse
Thanks I saw that you did try a 6.1 rom, but I was asking if you tried the initial original 6.1 rom. You may have tried another 6.1 rom but not the original rom that was on the phone before you started flashing.
To my other questions then, did the phone initially work when you first flashed to the 6.5 rom? If after all of this and it was initially working on the 6.5 rom, you may have a hardware problem and may need to flash back to the original rom and take it back to HTC for a service.
ClydeB1 said:
Thanks I saw that you did try a 6.1 rom, but I was asking if you tried the initial original 6.1 rom. You may have tried another 6.1 rom but not the original rom that was on the phone before you started flashing.
To my other questions then, did the phone initially work when you first flashed to the 6.5 rom? If after all of this and it was initially working on the 6.5 rom, you may have a hardware problem and may need to flash back to the original rom and take it back to HTC for a service.
Click to expand...
Click to collapse
yes the phone was working fine when i firstly flashed to 6.5 rom and its not hardware how can i know which was original rom now at this condition???
manbir said:
yes the phone was working fine when i firstly flashed to 6.5 rom and its not hardware how can i know which was original rom now at this condition???
Click to expand...
Click to collapse
You can try going to the HTC website for your county and look to see if there is a rom upgrade available. If so you can enter your Serial Number to see if you can access it for download. Alternatively you can look for a stock rom here Try and find a friend near you with the HD and check their version.
Same problem here .....my wifi cant connect to anything..when im tryin to turn it on nothings happen and cant acces to web browsing..nothing works...i have flahed 4 roms till now and all the rom had the same problem...i ve flashed miris rom NRG rom Dutty rom and maryone....i dont know what to do....till before a week worked like a charm...but now it is still dead....
If your wi-fi was working and then on the same rom has suddenly stopped working that probably sounds like a hardware issue. You may need to flash back to rom and return the device for a service.
are you serious??cause in my country i leave in greece salonica..and the htc center is in athens and must send the device there and they told me to wait about one month or two to get it back....no way...!!!!but it is very strange...when i had miris rom it worked like a charm..after trying to flash a new rom to nrg then wifi stopped workin...tryed to flash another rom like duttys and maryone and still the same....why am i so unlucky???is there any solution???maybe is that any problem with rom?or misiing some file?
anyway thanks for reply....have a nice and a happy new year...god bless you!!
pm...sorry for my english...
edangel said:
are you serious??cause in my country i leave in greece salonica..and the htc center is in athens and must send the device there and they told me to wait about one month or two to get it back....no way...!!!!but it is very strange...when i had miris rom it worked like a charm..after trying to flash a new rom to nrg then wifi stopped workin...tryed to flash another rom like duttys and maryone and still the same....why am i so unlucky???is there any solution???maybe is that any problem with rom?or misiing some file?
anyway thanks for reply....have a nice and a happy new year...god bless you!!
pm...sorry for my english...
Click to expand...
Click to collapse
You can always try going back to the miri rom you were using, or to the original rom that was on the phone. If wi-fi still does not work then it sounds like it is a hardware issue and there is no other way around it that I can see but to take it in for a service, unless you think you can replace the part yourself. Is there no cell phone repair services in your location, although you may need to pay to have it repaired then as it will not be under HTC warranty then if you are prepared to take that chance. Sometimes these parts just break, it doesn't happen all the time, but hey even multi-million $ F1 cars break down.
ClydeB1 said:
You can always try going back to the miri rom you were using, or to the original rom that was on the phone. If wi-fi still does not work then it sounds like it is a hardware issue and there is no other way around it that I can see but to take it in for a service, unless you think you can replace the part yourself. Is there no cell phone repair services in your location, although you may need to pay to have it repaired then as it will not be under HTC warranty then if you are prepared to take that chance. Sometimes these parts just break, it doesn't happen all the time, but hey even multi-million $ F1 cars break down.
Click to expand...
Click to collapse
SO...FOR MANY HOURS TO FIND SOMETHING I MADE IT...THE SOLUTION IS UNDER START SETTINGS CONNECTION ADVANCED NETWORK AND THEN I JUST ENABLE FROM HSDPA/HSUPA TO ONLY HSDPA AND NOW ITS WORKING...
AS I THOUGHT THIS SETTINGS DEPENDS OF WHAT MODEM ROUTER YOU HAVE...JUST WORKING FINE NOW.....
SO EVEN MULTI MILLION F1 CAN BE FIXED UP......if you are rich and got the money...hahahaha
SO THANKS ANYWAY!!!!!!!!I AM GLAD FOR TRYING TO HELP ME.....
edangel said:
SO...FOR MANY HOURS TO FIND SOMETHING I MADE IT...THE SOLUTION IS UNDER START SETTINGS CONNECTION ADVANCED NETWORK AND THEN I JUST ENABLE FROM HSDPA/HSUPA TO ONLY HSDPA AND NOW ITS WORKING...
AS I THOUGHT THIS SETTINGS DEPENDS OF WHAT MODEM ROUTER YOU HAVE...JUST WORKING FINE NOW.....
SO EVEN MULTI MILLION F1 CAN BE FIXED UP......if you are rich and got the money...hahahaha
SO THANKS ANYWAY!!!!!!!!I AM GLAD FOR TRYING TO HELP ME.....
Click to expand...
Click to collapse
Hey, I'm glad you got it sorted. I'll remember to add that additional check to my little arsenal of things for troubleshooting. Thanks for the feedback.
Bought an HD, flashed HSPL, flashed Dutty R14, hard reset twice. Everything works perfectly except phone freezes every time I try to answer an incoming call. So I flashed 3 other roms and had the same problem with all of them. Then I flashed the stock Telstra rom and it works perfectly, I can answer calls and everything is fine.
I thought it was a problem with my phone so I bought a brand new HD and flashed the HSPL then the R14 rom and I have the same problem where I can't answer calls. There's no way it's a problem with the phone itself since it's brand new and I've had this problem on 2 separate phones. It's also hard to believe that every single rom here has a problem where you can't answer calls, or that R14 is so bad that it screws up something internally as soon as you install it.
What's going on?
This same thing happened to me - had to get a new SIM card from my cell phone provider. Some older SIM cards cause this - not sure why?
rpimps said:
Bought an HD, flashed HSPL, flashed Dutty R14, hard reset twice. Everything works perfectly except phone freezes every time I try to answer an incoming call. So I flashed 3 other roms and had the same problem with all of them. Then I flashed the stock Telstra rom and it works perfectly, I can answer calls and everything is fine.
I thought it was a problem with my phone so I bought a brand new HD and flashed the HSPL then the R14 rom and I have the same problem where I can't answer calls. There's no way it's a problem with the phone itself since it's brand new and I've had this problem on 2 separate phones. It's also hard to believe that every single rom here has a problem where you can't answer calls, or that R14 is so bad that it screws up something internally as soon as you install it.
What's going on?
Click to expand...
Click to collapse
You got to be kidding. If it works perfect with stock rom, your phone is good in quality.
You should try updating the Radio as well.
bdbell said:
This same thing happened to me - had to get a new SIM card from my cell phone provider. Some older SIM cards cause this - not sure why?
Click to expand...
Click to collapse
Yeah my card is at least a few years old (still says Cingular instead of AT&T) so I'll try getting a new one and see if it works.
mcdull said:
You got to be kidding. If it works perfect with stock rom, your phone is good in quality.
You should try updating the Radio as well.
Click to expand...
Click to collapse
What radio would you suggest? 1.14.25.24 is supposed to be the best one for my area (inner-city Houston/Austin, TX in the US) and that's what I've been using. It's the same one that comes with the stock rom that worked.
rpimps, I'm a bit north of you in OK, and 1.13.25.24 is what I've used for some time with great batt life and reception and got the same while in Houston not long ago.
I've got the Telstra, but the stock rom I flash before cooked is always the European 1.56, which I downloaded from the HTC Europe website. It comes with 1.13.
bdbell said:
This same thing happened to me - had to get a new SIM card from my cell phone provider. Some older SIM cards cause this - not sure why?
Click to expand...
Click to collapse
I got a new sim and it still does it. Also I'm using the same radio that I used with the stock rom, and the stock rom worked fine, so I doubt the radio is the problem. I think the HD just isn't capable of running these roms.
Is your model a BLAC100?
Also, what language did you use?
Could it be the problem of non-English characters?
mcdull said:
Is your model a BLAC100?
Also, what language did you use?
Could it be the problem of non-English characters?
Click to expand...
Click to collapse
How do you check if it's a BLAC100? All I know is it's an 8285. The only language I use is English.
Why don't you try another rom, there's a lot of rom's here.
rpimps said:
Then I flashed the stock Telstra rom and it works perfectly, I can answer calls and everything is fine.
Click to expand...
Click to collapse
So hardware of your HD is OK. Nothing wrong with device.
As Sean3 wrote, try to flash WM 6.1 European 1.56, links are on HD Wiki...
If it works too, then it's some conflict between cooked ROMs and your device.
Bodisson said:
So hardware of your HD is OK. Nothing wrong with device.
As Sean3 wrote, try to flash WM 6.1 European 1.56, links are on HD Wiki...
If it works too, then it's some conflict between cooked ROMs and your device.
Click to expand...
Click to collapse
It works fine with the stock rom, but it doesn't work with ANY other rom. That's what's so weird.
Totally wild question: Are you sure you have UNLOCKED device?
Altough, I have no idea does that matter at all...
Just 2 throw in my 2 cents and a quick recap:
1. You flashed HSPL - Was this successful? What is your SPL? Did you use correct HSPL? Did you follow this guide?
2. You then flashed rom and everything worked but phone freezed everytime you tried to answer a call - Have you tried another radio?
3. There is no reason why your device wouldn't be able to use cooked roms if you have successfully unlocked it by using either USPL or HSPL
4. You say you have returned to stock rom - Did you return to original stock rom, i.e. rom which was on your device when you got it. Did you also return to stock SPL? Was this 100% successful?
Bodisson said:
Totally wild question: Are you sure you have UNLOCKED device?
Altough, I have no idea does that matter at all...
Click to expand...
Click to collapse
Yes it's unlocked. It does answer calls SOMETIMES and it always makes outgoing calls successfully.
Fallen Spartan said:
Just 2 throw in my 2 cents and a quick recap:
1. You flashed HSPL - Was this successful? What is your SPL? Did you use correct HSPL? Did you follow this guide?
2. You then flashed rom and everything worked but phone freezed everytime you tried to answer a call - Have you tried another radio?
3. There is no reason why your device wouldn't be able to use cooked roms if you have successfully unlocked it by using either USPL or HSPL
4. You say you have returned to stock rom - Did you return to original stock rom, i.e. rom which was on your device when you got it. Did you also return to stock SPL? Was this 100% successful?
Click to expand...
Click to collapse
1. HSPL flash was successful, I used this guide - http://forum.xda-developers.com/showpost.php?p=3930436&postcount=2 - and flashed it to 1.56 olinex.
2. I tried 2 radios, 1.14 and 1.17.
3. I flashed the stock Telstra rom but kept the 1.56 olinex SPL. Was successful, and phone works perfectly with this rom. I also tried another wm6.1 rom (dutty 3.9xt) to see if there was a problem with it running 6.5 but the 6.1 rom had the same problem.
Is your device not SIM locked? Can you insert another SIM into the device, try one of your mates SIMs
ClydeB1 said:
Is your device not SIM locked? Can you insert another SIM into the device, try one of your mates SIMs
Click to expand...
Click to collapse
Tried that, it has the same problem, outgoing calls are fine but incoming calls freeze sometimes.
The device is an unlocked Telstra and I'm using it with AT&T in the US.
Hey guys,
I've searched everywhere but there's no definitive guide to revert to stock from WP7. Pretty much, I tried out WP7 on my dad's HD2, but he didn't like it. So I need to revert it, but there's so much stuff to know that it all gets pretty intimidating.
Anyways,
HTC HD2 w/ Windows Phone 7 (Using aMAGLDR V1.12 - Build: Jan 12 2001, 21:09:22 - by Cotulla 2011 [this ONLY, no other mods present])
Trying to convert back to Windows Phone 6.5
Using Windows XP
Have d/led Windows Active Sync but it won't connect to the PC even when the USB is plugged in. (I'm guessing this is the reason why I can't revert to stock, it won't even connect to the PC)
I've also d/led the latest stock RUU_Leo_1_5_TMOUS_3.14.531.1_Radio_Signed_15.42.50.11U_2.15.50.14_2_Ship from the forums.
It looks like I have all the resources but my PC won't even recognize the phone being connected to the computer. Must I do anything else besides attempting to flash the stock ROM?
Thanks A LOOOOTTTTT in advance!
I have the Exact same question anybody help please?
It might be you don't have the drivers installed that are needed, your antivirus could be preventing a connection, I had a similar problem where it seemed that it didn't recognize my phone uninstalled sync when into my bootloader it didn't seem to recognize my phone tasked 29 and it went through without a problem
::BUMP::
PLEASE someone help me out, this is getting soo frustrating, I switched to my laptop running Vista and it still won't recognize it.
I d/led Windows Mobile Device Center and it STILL won't work.
Please anyone.
Enter the bootloader screen then plug phone in and wait for it to say USB at the bottom then flash the stock rom from t-mobile
Sent from my FutureShocks HD2 MIUI using XDA App
Do what he says in post above mine.
Or flash using SD-Card method!
Also read the MAGDLR thread dummy, there you also see how to revert back
xmoo said:
Do what he says in post above mine.
Or flash using SD-Card method!
Also read the MAGDLR thread dummy, there you also see how to revert back
Click to expand...
Click to collapse
dude u been around here long enough, no need for name calling
actually im having the same issue as of today
http://forum.xda-developers.com/showpost.php?p=11418541&postcount=1526
i was able to flash winmo through sd card but 10 different pcs wont see this phone now, from win xp to vista, win 7, mac !
phone works fine in winmo but cant connect, obviously cant flash hspl3 so im stuck on stock winmo, with both spls 2.8 and 2.10 and none of them makes a different
i'll bookmark this and keep following up and if i figure it out i'll update
back to stock LEO
I have same problem i install 2.2 android on my HTC hd2 (t-mobile) and now i can't sync my phone with computer to install stock LEO as well as there is no option on the 2.2 froyo for sd card if any one know how to get back to stock windows 6.5 let me know
I can't find the stock rom on tmobile
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
tmobile stock rom.
Invalid IMEI???
So I went to this link because I want to flash my HD2 back to WM6.5 stock. When I enter the IMEI it tells me that it is invalid. Is there a way to get the stock rom from some other site?
I have a HTC HD2 T-Mobile LEO 1024. Model HTC Desire A8181.
Thank you in advance for your help.
Manny
webmanny said:
So I went to this link because I want to flash my HD2 back to WM6.5 stock. When I enter the IMEI it tells me that it is invalid. Is there a way to get the stock rom from some other site?
I have a HTC HD2 T-Mobile LEO 1024. Model HTC Desire A8181.
Thank you in advance for your help.
Manny
Click to expand...
Click to collapse
sure you dont have a desire?
Yes I do I have a Model HTC Desire A8181. It still says HTC HD2, but it says Desire on the phone data screen.
lol, and teh tmo website wont accept your imei, odd that. get the rom from HERE instead.
Will SW upgrade lock my unlocked HD2 to T-Mobile??
Hi
My HD2 from Tmobile is unlocked & am using it in India.
It has SOFTWARE: OS :5.2.21889 (21889.5.0.87), Manila version:2.5.20121412.1
ROM Version :2.10.531.1 (82076) WWE
I am planning to upgrade the ROM to 3.14.531.1.
I read at forum that Post upgrade, my HD2 will default to factory settings. Does it mean that my phone will again be locked to T-mobile?
Pl confirm asap as I don't want a locked phone
Thanks...
no it will never be re locked again, no matter what you do.
Ahh but which one????
samsamuel said:
lol, and teh tmo website wont accept your imei, odd that. get the rom from HERE instead.
Click to expand...
Click to collapse
Ok dude this makes a lot of sense, but which one should I download? Are those version numbers or radio IDs? I don't want to brick my HD2.
Thanks for any help you may give.
those are rom version numbers. go for either 2.10.0 (not .1) or 2.13, or either of the 3.14
dude u have 2 download zune center if u got the wp7 rom thats how u sync the phone
Yes there is a way go to htcpedia.com register with them make your ocunt..and download htc hd2 stuck rom..then put your phone and bootlouder mode..and put the stuck rom you just download..makesure your phone is conecte it at least 50 % of batery no sim car no sd car.
Good luck bro..
sent it from htc hd2 android nexus one custom rom