[Q] notification bar gone after flashing 2.3.3 stock - Nexus One Q&A, Help & Troubleshooting

Hi,
after flashing the stock GRI40 (2.3.3) from: http://forum.xda-developers.com/showthread.php?t=968396 , plus the accompanying su.update to get root access again, my notification bar went missing.
so far so bad, what I would like to know now is:
1. the best way to copy files to the SD card, as i can no longer activate USB data transfer through the notification bar
2. how can I get my notifications back? e.g. re-applying ROM
system info:
Android: 2.3.3
HBoot: 35.0017
Radio: 5.08.00.04
Recovery: Ra v2.2.1

Probably have to do a factory reset (wipe).

everything works fine now, thanks a lot!

How did you fix it? I'm having the same problem.

avinaz said:
How did you fix it? I'm having the same problem.
Click to expand...
Click to collapse
Does anyone knows if this has something to do with launcherPro?
Wipe takes too long... =/

avinaz said:
How did you fix it? I'm having the same problem.
Click to expand...
Click to collapse
I already posted the answer and the OP replied that that fixed it. How hard is it to read 3 posts in this thread?
semidev said:
Does anyone knows if this has something to do with launcherPro?
Wipe takes too long... =/
Click to expand...
Click to collapse
It has nothing to do with launcher pro.

you shouldn't need to doo a ful wipe, only cache and dalvk.

same problem
Nook running 2.3.3
I'm a noob to all this -- how do you flush cache and dalvk?

stham01 said:
Nook running 2.3.3
I'm a noob to all this -- how do you flush cache and dalvk?
Click to expand...
Click to collapse
From recovery...
Sent from my NookColor using Tapatalk

Ok, thanks.

Related

Unrevoked forever + radio update

Can radios be flashed with UF at anytime now with an update.zip?
Also where is a zip file for the 2.15 radio or is there anyone willing to share? It's not the same as the evo's is it?
Sent from my ADR6300 using Tapatalk
To flash:
1. Place PB31IMG.zip to root of SD card
2. Power down phone
3. Press volume down and power at same time
4. It will ask to update...press volume UP for yes
5. It will ask for reboot...press volume UP for yes
Once done...enjoy.
bradatz said:
Can radios be flashed with UF at anytime now with an update.zip?
Also where is a zip file for the 2.15 radio or is there anyone willing to share? It's not the same as the evo's is it?
Click to expand...
Click to collapse
The file download for the radio is in the Unrevoked forever thread.
Sent from my rooted Incrediblę
tats_06 said:
To flash:
1. Place PB31IMG.zip to root of SD card
2. Power down phone
3. Press volume down and power at same time
4. It will ask to update...press volume UP for yes
5. It will ask for reboot...press volume UP for yes
Once done...enjoy.
Click to expand...
Click to collapse
i thought with S-OFF, we can flash radio with CWM? also, do i just rename the radio OTA to PB31IMG(.zip)?
with s-off, i can flash the radio anytime i want with any rom i want? without going back to the unroot stock rom?
zeke1988 said:
i thought with S-OFF, we can flash radio with CWM? also, do i just rename the radio OTA to PB31IMG(.zip)?
with s-off, i can flash the radio anytime i want with any rom i want? without going back to the unroot stock rom?
Click to expand...
Click to collapse
It already saves it as PB31IMG.zip....so just move it to root and go on with process.
That's for the splash and does not update radio. I've installed that and the update.zip and still have 2.05
Sent from my ADR6300 using Tapatalk
bradatz said:
That's for the splash and does not update radio. I've installed that and the update.zip and still have 2.05
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
He said the thread, not the wiki.
I honestly don't know what I'm doing wrong, i have the pb31img.zip(radio update) on root of sd did the whole power down and power on with volume(down) and when i get to hboot it has
fastboot
recovery
clear storage
simlock
after 2 seconds or so it does this:
sd checking...
loading...pb31diag.zip
no image
loading...pb31diag.nbh
no image or wrong image
loading...pb31img.zip
no image
loading...pb31img.nbh
no image or wrong image
so does anyone know what the problem is?
Sac's Droid said:
I honestly don't know what I'm doing wrong, i have the pb31img.zip(radio update) on root of sd did the whole power down and power on with volume(down) and when i get to hboot it has
fastboot
recovery
clear storage
simlock
after 2 seconds or so it does this:
sd checking...
loading...pb31diag.zip
no image
loading...pb31diag.nbh
no image or wrong image
loading...pb31img.zip
no image
loading...pb31img.nbh
no image or wrong image
so does anyone know what the problem is?
Click to expand...
Click to collapse
Make sure the sdcard is formatted as fat32 and that the zip name is exactly "PB32IMG.zip", exact casing and make sure also that its not .zip.zip
OK i just reformatted the sd card to FAT32 and the file i downloaded was PB31IMG, i don't have an extra .zip, that's common mistake for me to do so it was first thing to check. ok so that fixed it. i must not have had it formatted correctly, its whatever it was stock
edit: mrozzeh and the rest of the unrevoked team, i would like to say thank you, and thanks for the personal help too.
Sac's Droid said:
OK i just reformatted the sd card to FAT32 and the file i downloaded was PB31IMG, i don't have an extra .zip, that's common mistake for me to do so it was first thing to check. ok so that fixed it. i must not have had it formatted correctly, its whatever it was stock
edit: mrozzeh and the rest of the unrevoked team, i would like to say thank you, and thanks for the personal help too.
Click to expand...
Click to collapse
Anytime. (10 characters blah)
Hold the optical pad and the power button...not the vol down key and give it a shot
Radio update isn't working for me. Saved PB31IMG.zip to the root of my FAT32formatted SD card, rebooted, it found the PB31IMG.zip file, went though the loading process, got the point where it said "checking" and then went back to the menu without loading the update. I've downloaded the radio update twice with the same results. I currently have the 2.05.00.06.11 radio but have not yet installed s -off. Do I need to do that first?
Any other suggestions?
EDIT: Nevermind, I installed the unrevoked forever s -off patch and the radio update seems to be installing now.
EDIT 2: Radio update updates kernal to .32 correct?
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Milton1964 said:
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Click to expand...
Click to collapse
Very bad idea...you may end up with a brick using a ROM from a different phone.
Milton1964 said:
Question for anybody that can answer this can we flash any rom from another phone and it will work with the Incredible after we done this to our phone. Thanks.
Click to expand...
Click to collapse
NO
this is not a good idea, junior
jdkoreclipse said:
Is that a definate? I know about bricks annd stuff but in curious.
Ps im not noob
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
how bout the f-in hardware drivers? would that work....
like a napalm full of facepalm
Thanks for the reply. don't want to brink my phone. loving it with all the new updates that are. Thanks again.
Milton1964 said:
Thanks for the reply. don't want to brink my phone. loving it with all the new updates that are. Thanks again.
Click to expand...
Click to collapse
no problem.
(wishful thinking: I wish we could cause Bugless Beast on a Dinc would be pretty awesome)
obededom said:
no problem.
(wishful thinking: I wish we could cause Bugless Beast on a Dinc would be pretty awesome)
Click to expand...
Click to collapse
What just happened to Shadowmite's Unrevoked Forever post in Development. It disappeared?

[Q] camera not responding. HELP please

hi
thanks for reading.
i have a massive issue at the min with my camera not working. was fine before i flashed nxsence i think it was now every rom i flash isnt alowing the camera to work.
i have reverted back to stock 2.3.3 but to no avail. see here
http://forum.xda-developers.com/showthread.php?t=968396
can anyone point me in the right direction or throw me some advice.
thanks in advance
Did you do a full wipe including system partition when moving between different rom?
What radio?
baseballfanz said:
Did you do a full wipe including system partition when moving between different rom?
Click to expand...
Click to collapse
yeah.
allways do a full wipe when flashing different roms.
factory
delvic
cache partition
ect
Jack_R1 said:
What radio?
Click to expand...
Click to collapse
radio im currently running is 5.08.00.04
hboot 0.35.007
this solved my camera FC problem
http://www.ebay.com/itm/31037916447...X:IT&_trksid=p3984.m1497.l2649#ht_1535wt_1185

[GUIDE] How To Fix GPS Issues On CM7

Sup People.
I recently noticed that my GPS wasnt working on CM 7.1.0.1. After searching this forum I found that quite a few people were also having the same issues so i've decided to compile this guide (all credits to OP's, i'm just putting this info in one place)...
theres not much to it to be honest, its just the information on the issue is just scattered around - plus there are probably better and more complete guides out there
Firstly, Originally Posted by bharat_xda19
bharat_xda19 said:
First install cm7 and then make a nandroid backup of it. Then wipe everything and restore the previous nandroid backup of stock froyo rom (or any rom with working gps) and use gps to capture your location. Then again wipe everything and restore the cm7 backup. Now gps will be working. And once gps on cm7 works, then even after a hard reset it still works. This seems to be an issue only when freshly installing cm7. This is definitely a safe method.
Click to expand...
Click to collapse
The next procedures are really for advanced users only...or if you know what you are doing if you dont understand anything in this next part I would do a little reading on the topic first
Secondly, Originally Posted by CroWarrior
CroWarrior said:
I found out in this topic here:
http://forum.cyanogenmod.com/topic/2...s-doesnt-work/
that some people fixed issues with this radio:
Radio_13.53.55.24H_3.35.19.25
Click to expand...
Click to collapse
OR
[OP - http://forum.xda-developers.com/showthread.php?t=1029318&highlight=flash+a+radio by 3xeno]
3xeno said:
-- The following will only work with Clockworkmod 2.5.x.
1. To get Clockworkmod 2.x when you have a newer version, flash the 'update1.zip' in the attachments
2. If you have ROM Manager, use the 'select older cwm' at the bottom of the list to select 2.5.0.7
-- Make sure you have sufficient battery charge and do not interrupt the flashing process.
•Radio_13.55.55.24H_3.35.20.10
•Radio_13.53.55.24H_3.35.19.25
•Radio_13.53.55.24H_3.35.15.31
Click to expand...
Click to collapse
THEN...
nejc121 (edited by arkoze) said:
Download radio zip above [19.25 or 20.10 as you probably have 15.31]
Put Radio .zip on root of SD card i.e not in any folders
Start ROM Manager
(ensure you have CWM 2.x.x.x)
Click Reboot into Recovery
Flash .zip from here by going to install zip from SD card
Don't forget to wipe caches first
Reboot phone by using the "reboot" option in cwm NOT by removing the battery
Click to expand...
Click to collapse
The process will take about 10 mins so be patient
Make sure you have sufficient battery charge and do not interrupt the flashing process.
I used the 3xeno and nejc121 method's above. Downgraded my CWM (which is only temporary if selecting through ROM manager) then flashed the 20.10 radio. 3xeno recomends flashing the 19.25 radio first to see if that works but i went straight for the 20.10 = WORKING GPS
!!!DISCLAIMER!!!
I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE. IT IS YOUR DECISION TO GO AHEAD WITH THESE MODS SO ONLY YOU CAN BE BLAMED FOR YOUR ACTIONS
p.s. if followed correctly, you shouldn't go wrong
In simple terms.
1.gain temp 2.5.0.7 cwm via Rom manager or temp update zip if your on a newer version already.
2. Flash 19.25 or/and 20.10 radio.
3. Reboot.
I have NEVER wiped anything to flash a radio as it has no influence over caches whatsoever.!!!!
Whenever I had gps issues I just flashed the 19.25 radio then test gps. Then re flash 20.10 radio. Never failed me yet. Lol.
regards,slymobi
slymobi said:
In simple terms.
1.gain temp 2.5.0.7 cwm via Rom manager or temp update zip if your on a newer version already.
2. Flash 19.25 or/and 20.10 radio.
3. Reboot.
I have NEVER wiped anything to flash a radio as it has no influence over caches whatsoever.!!!!
Whenever I had gps issues I just flashed the 19.25 radio then test gps. Then re flash 20.10 radio. Never failed me yet. Lol.
regards,slymobi
Click to expand...
Click to collapse
hi I dont suppose you could send me a link to those 2 radios as i can't download them now because of megaupload.com gone done please.
apollopayne said:
hi I dont suppose you could send me a link to those 2 radios as i can't download them now because of megaupload.com gone done please.
Click to expand...
Click to collapse
yes here they are
slymobi said:
yes here they are
Click to expand...
Click to collapse
thank you so much
apollopayne said:
hi I dont suppose you could send me a link to those 2 radios as i can't download them now because of megaupload.com gone done please.
Click to expand...
Click to collapse
the links still work. just dont use the megaupload one, scroll down and use other options
Hi there!
I've tried this multiple times but it still doesnt seem to work :/ Any suggestions on what to do next?
MacGyver Jack said:
Hi there!
I've tried this multiple times but it still doesnt seem to work :/ Any suggestions on what to do next?
Click to expand...
Click to collapse
Try using an app that triggers gps like gps test from the market. It worked 99% of the cases for me.
Sent from my HTC Wildfire using Tapatalk 2 Beta-5

help me my phone storage capacity is 260kb

hi all after fix premission in the rom,my phone storage is not working good and i change over and over the rom and wipe and... but the problem is not fixed the storage is good working in the recovery.
please help me
thanks
Which ROM you are in?
Also did you do wipe data cache and dalvik?
dark_7qe said:
hi all after fix premission in the rom,my phone storage is not working good and i change over and over the rom and wipe and... but the problem is not fixed the storage is good working in the recovery.
please help me
thanks
Click to expand...
Click to collapse
omfg. read my signature.
bondarun said:
Which ROM you are in?
Also did you do wipe data cache and dalvik?
Click to expand...
Click to collapse
i have bindroid and xl 3.6 1.5we and xl3.6 1.6
stona175 said:
omfg. read my signature.
Click to expand...
Click to collapse
which part i study???
my phone is s-off and i update the radio
oooooooooops
thanks my friend i install stock ruu and my problem fixed
i instal stock ruu every think ok but when i install custom rom (bindroid,xl,...)
the storage capacity............ help me
any body at home??????????
it your vold.fstab. change the value. 34 for old hboot(1.25) and 33 for new hboot(1.28)
nashshafrulrezza said:
it your vold.fstab. change the value. 34 for old hboot(1.25) and 33 for new hboot(1.28)
Click to expand...
Click to collapse
what is the value?????????????????????????????????
my hboot is 1.28
it should be fine if new hboot. may i know, which rom ROM you have flash and exist the problem? is it an old ROM?
nashshafrulrezza said:
it should be fine if new hboot. may i know, which rom ROM you have flash and exist the problem? is it an old ROM?
Click to expand...
Click to collapse
I dont have old rom.my roms is new but i have 2 rom :
1.stock ruu
2.custom
i have problem with custom roms and i change my custom rom (bindroid and xl)
but my problem not fixed.
i mean you are using old base custom rom.
here, use one of this. Should be fine.
http://forum.xda-developers.com/showthread.php?t=1649402
http://forum.xda-developers.com/showthread.php?t=1528889
nashshafrulrezza said:
i mean you are using old base custom rom.
here, use one of this. Should be fine.
http://forum.xda-developers.com/showthread.php?t=1649402
http://forum.xda-developers.com/showthread.php?t=1528889
Click to expand...
Click to collapse
I using the latest version of this rom
http://forum.xda-developers.com/showthread.php?t=1649402
this rom working good when i using fix premission this problem arose.
I am confident the problem is not the rom
i say this when i using wipe dalvik cache i see error report
(e:unknown volume for path [/sd-ext])
and then i press yes to finish and recovery report to finish dalvik cache
dark_7qe said:
I using the latest version of this rom
http://forum.xda-developers.com/showthread.php?t=1649402
this rom working good when i using fix premission this problem arose.
I am confident the problem is not the rom
i say this when i using wipe dalvik cache i see error report
(e:unknown volume for path [/sd-ext])
and then i press yes to finish and recovery report to finish dalvik cache
Click to expand...
Click to collapse
yeah, that is the command that you would always see when wipe dalvik cache. It is nothing. Dont worry about it.
nashshafrulrezza said:
yeah, that is the command that you would always see when wipe dalvik cache. It is nothing. Dont worry about it.
Click to expand...
Click to collapse
ok.but what do i with my problem??????
Same thing happened to me and I found a solution which was posted on another thread in the Development section (forgot which one, sorry).
Basically, flash this AFTER flashing your new rom and your sd card mount should be working fine again. Hope it helps
nipsadinio said:
Same thing happened to me and I found a solution which was posted on another thread in the Development section (forgot which one, sorry).
Basically, flash this AFTER flashing your new rom and your sd card mount should be working fine again. Hope it helps
Click to expand...
Click to collapse
thanks a milion my friend it fixed my phone

CM 7 stuck on boot animation:

Hi Guys,
Yesterday I tried to flash CM7 latest nightly build on my Incredible S, but got stuck on boot animation.
I was on NIK project X v4, I assume that that zip is missing something that's why I didn't boot.
Can anyone help me with the same??
mohitgalaxy3 said:
Hi Guys,
Yesterday I tried to flash CM7 latest nightly build on my Incredible S, but got stuck on boot animation.
I was on NIK project X v4, I assume that that zip is missing something that's why I didn't boot.
Can anyone help me with the same??
Click to expand...
Click to collapse
Have not had that issue
Nonverbose said:
Have not had that issue
Click to expand...
Click to collapse
I have flashed CM7 lastest nightly and I didn't boot it up and at the same time I have flashed the gbgapps zip as well.
Can that be a problem or not ??
Figured it out my self, flashing the google app without booting cause the boot loop.
Thread closed
Nonverbose said:
Have not had that issue
Click to expand...
Click to collapse
Ok one more thing, you are using CM7, so can you guide me to some MODS, themes some good stuff?
mohitgalaxy3 said:
Ok one more thing, you are using CM7, so can you guide me to some MODS, themes some good stuff?
Click to expand...
Click to collapse
I use ics theme https://play.google.com/store/apps/details?id=com.sonny.theme.ics
Also GO launcher
Nonverbose said:
I use ics theme https://play.google.com/store/apps/details?id=com.sonny.theme.ics
Also GO launcher
Click to expand...
Click to collapse
Wifi is not working for me, please help what should I do, should I replace wpa_supplicant file.
Go backup must have restored access points that could be a problem??
If yes can you please upload your wpa_supplicant file, you will find it in data\misc\wifi..
mohitgalaxy3 said:
Wifi is not working for me, please help what should I do, should I replace wpa_supplicant file.
Go backup must have restored access points that could be a problem??
If yes can you please upload your wpa_supplicant file, you will find it in data\misc\wifi..
Click to expand...
Click to collapse
Sounds like you're s-on and either didn't flash your boot.img in fastboot or, more likely didn't push your wifi module (/system/lib/modules/bcm4329.ko)
Nonverbose said:
Sounds like you're s-on and either didn't flash your boot.img in fastboot or, more likely didn't push your wifi module (/system/lib/modules/bcm4329.ko)
Click to expand...
Click to collapse
I have S-OFF, black rose.
No I haven't flash boot.img in fastboot.
Tell me what exactly i need to do make it working please.
Should I flash/push the wifi module from any other sense 4 rom, will that do the trick??
mohitgalaxy3 said:
I have S-OFF, black rose.
No I haven't flash boot.img in fastboot.
Tell me what exactly i need to do make it working please.
Should I flash/push the wifi module from any other sense 4 rom, will that do the trick??
Click to expand...
Click to collapse
If you're s-off you shouldn't be having that issue. Did you clear cache and dalvik when you flashed cm7?
Edit: what version radio are you on?
Nonverbose said:
If you're s-off you shouldn't be having that issue. Did you clear cache and dalvik when you flashed cm7?
Edit: what version radio are you on?
Click to expand...
Click to collapse
I have flashed the ARDH wipe script bfr flashing CM7 and I am on 11_M. the ics one radio.
mohitgalaxy3 said:
I have flashed the ARDH wipe script bfr flashing CM7 and I am on 11_M. the ics one radio.
Click to expand...
Click to collapse
Try rolling back to revolutionary hboot and a GB radio (the one in my sig is good) and see if that makes a difference. Remember to clear the cache after you have flashed them.
This might help getting back to revolutionary http://forum.xda-developers.com/showpost.php?p=26909973&postcount=13
Nonverbose said:
Try rolling back to revolutionary hboot and a GB radio (the one in my sig is good) and see if that makes a difference. Remember to clear the cache after you have flashed them.
This might help getting back to revolutionary http://forum.xda-developers.com/showpost.php?p=26909973&postcount=13
Click to expand...
Click to collapse
really for just wifi, I have to do that much???
mohitgalaxy3 said:
really for just wifi, I have to do that much???
Click to expand...
Click to collapse
2 things? No you don't have to do it, and as I don't have the issue I cant even say that it will work. There's always other options...

Categories

Resources