I'm like, the pro at bricking these things.
ANYWAYS,
I flashed that new 2.3.2 leak, worked okay. Wanted to go back to firefly, and didn't want the AT&T logo, so I flashed a i9000 rom, so it wouldn't put the stupid logo at boot, But it didn't have a CSC (apparently that was needed) well, I flash that with odin, I flash speedmod so I can install firefly. I do that and then I reboot the phone. And now it won't power on.
I just ordered a jig, will that boot a fully bricked no power on captivate into download mode?
from what ive heard if you cant get power you are SOL.
speaker magnet = warranty return
Mine is without power too. What sucks is I just got this like a week ago as a warranty replacement for the shutdown issue. What's this about a speaker magnet?
By "no power on", do you mean your battery is dead? I can't imagine the jig won't work if the battery has power. That would be a hardware issue, and probably should be repaired by the manufacturer.
Could you try another battery, one from a friend with a Captivate?
Not battery dead, unless it killed it when it failed. Though I did wonder about that. Don't know anyone else with a cappy, anyone got a multimeter to test battery voltages?
Soccer_Dad said:
By "no power on", do you mean your battery is dead? I can't imagine the jig won't work if the battery has power. That would be a hardware issue, and probably should be repaired by the manufacturer.
Could you try another battery, one from a friend with a Captivate?
Click to expand...
Click to collapse
batteries fine. My brother has a captivate also. The bootloader is jacked up.
Hmmm, I've had boot loops, phone !, and a few other fails that the jig fixed. But I haven't seen an all black screen yet. Wish you the best.
Sent from my GT-I9000 using XDA Premium App
Just went thru this yday with someone else. Ur sbl or boot may be toast
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
http://forum.xda-developers.com/showthread.php?t=975216
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Related
so heres my situation maybe you guys can help.
I wanted to flash a new rom so i had to odin to stock. simple right? well i started the process and everythin seemed like smooth sailing untill it reach FactoryRHS i think im not to sure but w.e after it got up to that point my phone screen went purple? i was like what the freak and it was not going any where so i pulled battery and now my phone wont turn on... Any ideas how to fix? beside the JIG because i seriously dont want to do that unlesss i HAVE to.
Thanks in advance
Inc
IIDIncII said:
so heres my situation maybe you guys can help.
I wanted to flash a new rom so i had to odin to stock. simple right? well i started the process and everythin seemed like smooth sailing untill it reach FactoryRHS i think im not to sure but w.e after it got up to that point my phone screen went purple? i was like what the freak and it was not going any where so i pulled battery and now my phone wont turn on... Any ideas how to fix? beside the JIG because i seriously dont want to do that unlesss i HAVE to.
Thanks in advance
Inc
Click to expand...
Click to collapse
Somebody on here has a couple of jigs for like $15. I made one for about the same price. It's easy and necessary if you are going to flash and have a newer phone. It works every time.
Try this. Open the one click odin 3 (the jh6 stock rom version). Unplug the battery. Plug the usb cable in and press both volume buttons and the power button. Put the battery back in and as you do that release the power button but keep holding the volume.buttons. this should put you in download mode. Good luck.
Sent from my GT-I9000M using XDA App
goob1284 said:
Try this. Open the one click odin 3 (the jh6 stock rom version). Unplug the battery. Plug the usb cable in and press both volume buttons and the power button. Put the battery back in and as you do that release the power button but keep holding the volume.buttons. this should put you in download mode. Good luck.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
it is possible for the screen to be black and still be in download mode, i had it happen, and reflashed via odin on a black screen, odin still saw the phone so i said what the hell and click start, it worked successfully. so try th meathod above and dont be discouraged if the screen is still black.
also re download the stock rom and odin downloader. it may have been a corrupt file that caused it.
if those dont work buy a jig. pain i know but what else can you do? do you have insurance?
This is an weird problem that I think is fairly rare. I freaked out when this happened. I was able to get all the colors of the rainbow to appear on my phone. It happened to me 4 or 5 times before I finally managed to flash to stock. I just pulled the battery sd and sim every time it happened and flashed again. The phone is not bricked just keep trying and it should work
Sent from my SAMSUNG-SGH-I897 using XDA App
Sweet thanks guys I'll try all methods when I get home. I'm in my psy class right now lol
Sent from my Incredible using XDA App
double RL said:
Somebody on here has a couple of jigs for like $15. I made one for about the same price. It's easy and necessary if you are going to flash and have a newer phone. It works every time.
Click to expand...
Click to collapse
That would be me
goob1284 said:
Try this. Open the one click odin 3 (the jh6 stock rom version). Unplug the battery. Plug the usb cable in and press both volume buttons and the power button. Put the battery back in and as you do that release the power button but keep holding the volume.buttons. this should put you in download mode. Good luck.
Click to expand...
Click to collapse
Yup, this method worked on my Captivate. I tried it just before making the 301k ohm jig. Thanks!
bsv109 said:
Yup, this method worked on my Captivate. I tried it just before making the 301k ohm jig. Thanks!
Click to expand...
Click to collapse
Yeup! worked on mine too when I bricked it
Sent from my GT-I9000M using XDA App
Holy sh!t same thing hapoend to me....just do as says have batt out and usb in then three click and install batt release when u think att screen flashed release power..make sure odin is running.worked atfer about ten times
Sent from my SAMSUNG-SGH-I897 using XDA App
I completely killed my phone.
I was flashing with Odin 1 click, and it got stuck at the factoryfs.rfs. After I long while I had to disconnect it and now it is dead. No PC--!--Phone screen, no battery charging indicator, nothing. Not even my home made jig is working. 3 button combo not working, USB + VolUP + VolDown not working either. The Vol UP + Power HW test screen is gone too,
This happened to me once before with a failed Odin flash too. Completely unresponsive device. I did manage to get it back with the jig. But this time it seems I completely killed it.
It's weird though, because the most important step went fine (the bootloader/sbl.bin step). This sucks
Hmm idk got that yesterday check your jig. If you have a Meter to test its output is wound up having to rebuild my jig with 6 resistors to get the ohm I needed to force download. Do a search there is a guy that made a jig using a igo micro usb tip is used the same thing today but had to test out several different sets of resistors before I got dl mode
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
The only way to completely brick the captivate is to have a phone that did not come with the 3-button combo and have not flashed dg's 3 button fix and to have a broken micro-usb port so that a jig will not work. So in reality no its not possible.
If I were you I would check your jig and try again
bencaptivate said:
The only way to completely brick the captivate is to have a phone that did not come with the 3-button combo and have not flashed dg's 3 button fix and to have a broken micro-usb port so that a jig will not work. So in reality no its not possible.
If I were you I would check your jig and try again
Click to expand...
Click to collapse
this is false.
i bricked one with a bootloader flash from armani....i was stupid to leave it in the CWM flashable i made
and i have another one that is completely dead...unrelated to flashing, as it was stock JH7...even my jig wont bring it back
Yeah well. I'm going to buy a jig from ebay (does the Fascinate jig works with the Captivate as well?
Otherwise, I'll just get a used Captivate for cheap. Would love a new phone, but can't justify the expense of a Nexus S or something.
Another option, is it possible to just replace the motherboard? would that work? If so, I can get one for spare parts.
I'll be going back to a feature phone for the next couple of weeks though : ( . I loved my cappy. It's been a terrible week though, it's like I'm on a roll of bad news. Oh well, it's just a phone.
cumanzor said:
Yeah well. I'm going to buy a jig from ebay (does the Fascinate jig works with the Captivate as well?
Otherwise, I'll just get a used Captivate for cheap. Would love a new phone, but can't justify the expense of a Nexus S or something.
Another option, is it possible to just replace the motherboard? would that work? If so, I can get one for spare parts.
I'll be going back to a feature phone for the next couple of weeks though : ( . I loved my cappy. It's been a terrible week though, it's like I'm on a roll of bad news. Oh well, it's just a phone.
Click to expand...
Click to collapse
How much are you planning on spending? I would just go to to Radio Shack massive bag of resistors is 12 bucks and the iGo micro usb connector is 10 bucks so 22 bucks and you have an easy jig and pretty much unlimited resistors for all the bricks. I say thats the best way. i have enough resistors now to unbrick everyones captivates for the next year.
Go for the new Infuse, its a faster and upgraded captivate. Or just wait for the Iphone 5
Sent from my SAMSUNG-SGH-I897 using XDA App
Dupontrocks11 said:
Or just wait for the Iphone 5
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Uh oh, is gonna start another apple flame? Lol, if so I'll have something to read when bored
Sent from my SGH-I897 using XDA App
the Iphone5 really? what did he ever do to you?
thats just rude...
Trusselo said:
the Iphone5 really? what did he ever do to you?
thats just rude...
Click to expand...
Click to collapse
Lol its supposed to be 4 inches dual core, face regonition, aluminum back. It looks pretty good except i know apple is going to rape your wallet for it. But after 4 defective captivates, anything that works looks good
Sent from my SAMSUNG-SGH-I897 using XDA App
Hey guys. I've had my cappy since last august (one year, obviously) and today an act of god happened while I was trying to flash my phone to serendipity 6.4 - lightning struck my dorm building (poor college student), and the power went out.
anywho, as you know the warranty period is one year (stupid if you're locked in for 2 years, imho) and guess what? my warranty expired YESTERDAY. FML. called AT&T and they won't let me get a new one now, and I'm not eligible for an upgrade. so... i have two options - shell out a lot of cash that I don't have for an insurance replacement or new phone, or fix my phone. I've tried making a jig, and it didn't work. None of the key combos work. It always goes to the phone-warning-computer screen. I searched and searched for a miracle solution but found nothing. Does anyone have anything I can try?
If not... is there anyone out there with an HTC inspire or captivate they'd be willing to sell me? This is the only phone I have, I don't have a backup, nor a home phone line.
With the pc screen you can't hold down the volume buttons and plug in usb with Odin running? If you're on gb kf1 bootloaders I remember seeing somewhere that screen is download mode. Worth a try.
That's one of my biggest fears. Precisely why I started using my laptop for flashes.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
If ur seeing signs of some kind of life, then ur not hard bricked.
Edit: This may get u into download mode... Pull battery, insert usb into computer (with Odin already open), insert micro usb into ur phone, replace battery. If u get into download mode, put the battery cover on then proceed.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
For2ndtwin said:
If ur seeing signs of some kind of life, then ur not hard bricked.
Click to expand...
Click to collapse
well, it gives me the phone-!-computer screen but nothing else. Jig failed, odin fails, nothing will put it in download.
Edit: for the record, I was using Serendipity 7 before, and had that horrid battery drain problem, so I was trying to flash back to 6.4... if it matters.
^ If u can't get into Recovery, I edited my post above to maybe help with download mode.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
You said JIG failed i really doubt that it will fail try with another JIG.
What bootloaders you are on ?
You try only holding volume down or only holding volume up while plugging into pc from phone off state. ( best way to make sure is pull battery and replace without pushing any buttons. )??
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
rkkaranrk said:
You said JIG failed i really doubt that it will fail try with another JIG.
What bootloaders you are on ?
Click to expand...
Click to collapse
I owe you a beer, sir.
didn't feel like buying another connector so I sacrificed my backup car charger and made a jig with better soldering and all that jaz, and voila, it worked!
edit: See ya got it...good deal.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
For2ndtwin said:
^^ Yeah, reboot ur computer and then try connecting to Odin to flash stock ecair or stock ginger i 9000 or i897 ginger...whichever way u want to go with it.
Click to expand...
Click to collapse
Computer's up, flashing stock currently.
my dormmates thought I was insane when i ran down the hall to my bud's dorm yelling IT'S ALIIIIIIIIVVVVVEEEEEE! I FIXED IT!!!!!! lol
But seriously. If you ever want a free beer...
^^^Hahaha ITS ALIIIVVVVVVEEEE, Yeah i know that feeling how it feels when u fix something.
rkkaranrk said:
^^^Hahaha ITS ALIIIVVVVVVEEEE, Yeah i know that feeling how it feels when u fix something.
Click to expand...
Click to collapse
Yup, complete with waving my phone above my head and everything =)
Lol awesome. Glad you got it working again good to always have a jig on standby.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
This is precisely the reason why I do all my flashing from my laptop and I have a jig (or two) around me...and an entire pack of resistors on my desk somewhere. I went to the shack the other day and bought the 10 dollar super pack of resistors, and as a Computer Engineering major, I should never have to buy resistors ever again...I gives you somewhere around 500 resistors of differing resistance.
worked with another jig (a better made one)? Gratz!!
Hi, last week I was in a foam party... with my nexus one in the back pocket..
It was almost completely wet, I wait different hours and then I try to start it but it stuck at the boot ("X" symbol). Yesterday I came back at home, I change the battery, clean the phone with alcohol and put it in the rice for almost a day. I can enter into the bootloader (blackrose), I can use fastboot but the recovery (amonRa) and my rom do no boot. I flashed the radio and the recovery several times. It always bootloop when I start the recovery. With blackrose I check the internal memory, there are 2 bad blocks... not too much. The screen, all the buttons and the battery seems to work correctly but the led does not light up when I charge the N1 (but it charge the battery and without the battery but plugged in, if I try to power on the smartphone, the led blinks).
Do you have some suggestions?
ercoppa said:
Hi, last week I was in a foam party... with my nexus one in the back pocket..
It was almost completely wet, I wait different hours and then I try to start it but it stuck at the boot ("X" symbol). Yesterday I came back at home, I change the battery, clean the phone with alcohol and put it in the rice for almost a day. I can enter into the bootloader (blackrose), I can use fastboot but the recovery (amonRa) and my rom do no boot. I flashed the radio and the recovery several times. It always bootloop when I start the recovery. With blackrose I check the internal memory, there are 2 bad blocks... not too much. The screen, all the buttons and the battery seems to work correctly but the led does not light up when I charge the N1 (but it charge the battery and without the battery but plugged in, if I try to power on the smartphone, the led blinks).
Do you have some suggestions?
Click to expand...
Click to collapse
I mean, i guess this might not work since your N1 is now Liquid Damaged but try this:
Fastboot erase system
fastboot erase boot
fastboot erase userdata
fastboot erase cache
fastboot erase recovery
Note: you will need a recovery image and a rom zip so that you can test out if your N1 boots into recovery or not, if it does proceed to flashing the rom then reboot, and still Your phone has acquired Liquid Damage, nothing i have told you might work, it might not even get recognised by the Computer that is being used for the current operation, your phone might even end up in smoke...ok maybe not but you have been warned.
Hi, thank you for you reply. I tried what you said but without success, the recovery continues to bootloop (of course I re-flashed it).
Maybe I have to say goodbye to my N1 :crying:
ercoppa said:
Hi, thank you for you reply. I tried what you said but without success, the recovery continues to bootloop (of course I re-flashed it).
Maybe I have to say goodbye to my N1 :crying:
Click to expand...
Click to collapse
Not really, you can send your phone into a dealer to get a part changed well mainly the motherboard because that is dramatically cheaper than purchasing a new phone
Sent from my Nexus One using xda app-developers app
You should have stuck it in a bag of rice as soon as you got home.
Sent from my Nexus One using xda app-developers app
cpm said:
You should have stuck it in a bag of rice as soon as you got home.
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
Now that he powered it on I guess its already corroded, because water+electricity = corrosion and that equals to damaged electronics
Sent from my Nexus One using xda app-developers app
humzaahmed155 said:
Now that he powered it on I guess its already corroded, because water+electricity = corrosion and that equals to damaged electronics
Click to expand...
Click to collapse
That's true, but if you search online a lot of people (e.g. youtube v=FQAUncGSVT0) were very lucky with N1 & water.
You should have stuck it in a bag of rice as soon as you got home.
Click to expand...
Click to collapse
You are totally right... but I was in Palma de Mallorca... very drunk and stupid :silly:.
Not really, you can send your phone into a dealer to get a part changed well mainly the motherboard because that is dramatically cheaper than purchasing a new phone
Click to expand...
Click to collapse
I don't know yet but probably here in Rome they will ask me too much money (>100€) if it is the motherboard. Maybe I can upgrade to an used Samsung Galaxy Nexus (~200€-280€),
ercoppa said:
That's true, but if you search online a lot of people (e.g. youtube v=FQAUncGSVT0) were very lucky with N1 & water.
You are totally right... but I was in Palma de Mallorca... very drunk and stupid :silly:.
I don't know yet but probably here in Rome they will ask me too much money (>100€) if it is the motherboard. Maybe I can upgrade to an used Samsung Galaxy Nexus (~200€-280€),
Click to expand...
Click to collapse
Good luck on your transition!
Sent from my Nexus One using xda app-developers app
ercoppa said:
That's true, but if you search online a lot of people (e.g. youtube v=FQAUncGSVT0) were very lucky with N1 & water.
You are totally right... but I was in Palma de Mallorca... very drunk and stupid :silly:.
I don't know yet but probably here in Rome they will ask me too much money (>100€) if it is the motherboard. Maybe I can upgrade to an used Samsung Galaxy Nexus (~200€-280€),
Click to expand...
Click to collapse
While your at it I still need to see the toughness of the phone if you know what I mean, how's about a drop test which YouTube is yet to see as you will be the first one to do it on YouTube
Sent from my Nexus One using xda app-developers app
Hi all!
Today my phone just stopped at school for no reason. I checked the clock on it and after a few minutes I wanted to check it again, but this time I got no response from it. I thought it just freezed. So I pulled the battery out and put it back after a few mins. But no response. After I got home, I plugged it the wall charger, but nothing happened. No battery indicator, not even the little circle. Have you got any ideas what just happened to my phone?
is the model i9000 and not i9300?
Just wanted to make sure because I've had similar issues with i9300.
Nope. It's the first generation Samsung Glaxy S. The one with the AMOLED display not even the I9003, so the one with the S-LCD screen.
beatimgame said:
Nope. It's the first generation Samsung Glaxy S. The one with the AMOLED display not even the I9003, so the one with the S-LCD screen.
Click to expand...
Click to collapse
Ok.
I guess it's out of warranty then...
What ROM and Kernel did you have?
I had the latest Cyanogenmod 10 Nightly and the latest Devil kernel.
But I rented a USB JIG today and I hope it will fix it.
beatimgame said:
Hi all!
Today my phone just stopped at school for no reason. I checked the clock on it and after a few minutes I wanted to check it again, but this time I got no response from it. I thought it just freezed. So I pulled the battery out and put it back after a few mins. But no response. After I got home, I plugged it the wall charger, but nothing happened. No battery indicator, not even the little circle. Have you got any ideas what just happened to my phone?
Click to expand...
Click to collapse
are you able to try an other battery? afaik without battery the phone wont do anything even with charger plugged
Have you tried to remove the battery and keeping it away more than 5 minutes?
Any progress with the JIG?
noobtron said:
Have you tried to remove the battery and keeping it away more than 5 minutes?
Any progress with the JIG?
Click to expand...
Click to collapse
Nothing good with the JIG unfortunately. I'll take it to a Samsung Service tomorrow and see what they can do.
beatimgame said:
Nothing good with the JIG unfortunately. I'll take it to a Samsung Service tomorrow and see what they can do.
Click to expand...
Click to collapse
i wouldnt do that ... did you tried an other battery? its not my money but imo you should try more advices
I tried two different batteries, the jig, every button combo I found on the internet, but nothing worked. Now I took it to a little phone service and see what they say.
Seems that there's been some hardware problems with i9300. Dunno if something wrong with i9000 also.
If you love your i9000 that much, fix it. If not, buy i9300 §
Sent from my GT-I9300 using xda app-developers app
Good News. They successfully repaired it and it was cheap. They said I used Galaxy Ace modem driver which is weird, because I used that modem driver since I bought the phone.
noobtron said:
Seems that there's been some hardware problems with i9300. Dunno if something wrong with i9000 also.
If you love your i9000 that much, fix it. If not, buy i9300 §
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I will buy a SGS3, but only after new year.
Maybe your plug is brocken... And yes,... Sometimes the easiest way is the solution
sent from my GameBoy Color
------------------------------
working on:
SuperRom64 (2.3.6)
Project Stock (4.0.4)
Nice to hear that you got your phone fixed.
Sent from my GT-I9300 using xda app-developers app
SGS i9000b hard bricked dead
beatimgame said:
I tried two different batteries, the jig, every button combo I found on the internet, but nothing worked. Now I took it to a little phone service and see what they say.
Click to expand...
Click to collapse
Any news about your SGS ? Let me know. I hard bricked a SGS I9000B and its not even mine, I mean it wont turn on, wont light up the screen, wont give any working sign, when battery is inserted for a long time the phone warms up. 3 buttons wont work, sliding the battery in and pressing 3 buttons also wont work. Should I try the USB JIG? Is there any way around ?