Related
Hello all,
I love my seidio innocase ii and holster combo. I am looking for a car mount that will work with the case and allow charging too. I went by VZW today and looked at their Incredible Case. As stated in the other thread you can't use any case with it. I purchased a OEM air vent car mount, but the charging socket is blocked unless you slide your phone up in the grips (the two grips have holes cut out in the middle). I don't really like this one because the release button is at the top behind the phone. Not this one, but very smiler http://tiny.cc/eahgk
I would like to find one that can turn 90 degrees with a ratcheting action that the car charger can work with.
Bright Idea
I'm thinking about cutting up an old leather belt and gluing a small loop of it on the dash so I can clip my Seidio case on it. I'll let you know how it works out.
Just kidding dbrown! I am seriously eying the universal holder from http://www.proclipusa.com/ which definitely covers the usb port but I'm picturing a hole or slot cut through the side to fix that. All the other universal stuff looks HUGE
Why go for a universal holder when they have one made specifically for the DInc? Unless you have other devices you are planning on using with this. I just don't like their mounting spots for my vehicle, too bad too =/.
DeeBG said:
Why go for a universal holder when they have one made specifically for the DInc? Unless you have other devices you are planning on using with this.
Click to expand...
Click to collapse
We're looking for a holder that will work with the phone and case. I don't want to take the phone out of my case every time I need to mount it on the dash of my car.
I just got this:
amazon.com/gp/product/B003H92LSA/ref=oss_product
But I'm not satisfied with it. Cause to the short neck, The screen is head to the top of my head, and it's not very easy to get my phone on it.
Look for a better mount, still.
i've always used this gooseneck windshield mount from verizon.
you can find it by not specifying a phone under view all mounts..
Part #WINDMNT1
19.99
it fits most all phones ever made, plus cases.....
i have my inc in it tilted so i can access the touch screen keyboard...
i got a universal one from bestbuy and it works pretty good
I have one of these on the way. http://www.clingo.com/car-mounts/universal-hands-free-mount
I think that I would like to the get TETRAX XWAY to mount my DInc. Since I'm a new member I can't post links. Sorry.
I did see a nice video review and it seems like it would work perfectly because you can leave the phone in its case.
my friend got a car dock at the vzw store, the clip part the phone goes into is actually a removable belt clip. you can remove it from the car dock completely and put it all on your belt, pocket, whatever you wanna clip it to. however, there's no case involved in that package. i'm sure seidio has a case/clip you could mod to work with a similar product as i described first.
My plan is to get the car mount from htcpedia and the innocase holster for the Surface. Then either switch out the belt clips (hopefully), or just use my dremel on the innocase holster belt-clip to cut out the same as the mount's beltclip.
A little more expensive, but seems to be the best "factory-type" option I can come with.
QSilver9300 said:
I think that I would like to the get TETRAX XWAY to mount my DInc. Since I'm a new member I can't post links. Sorry.
I did see a nice video review and it seems like it would work perfectly because you can leave the phone in its case.
Click to expand...
Click to collapse
I have one of these too, it's awesome! If you want a mount that doesn't stick on the windshield AND works with a case...this is the way to go.
Hello,
I really like the xway too, but not sure if it would work with the inocase II. The case has a ridge that runs down the length of the back of the case. I went with this..
http://bit.ly/9lOy6V. I got the sm410 and currently using the vent grip. Its a little big, but does put the dinc with arms reach if needed. And the power cord is not blocked.
try something from here
http://www.bracketron.com/
i have the air vent mount and it works great with any phone including my incredible.
Arkon Mega Grip - Give them a try.
k.electron said:
try something from here
http://www.bracketron.com/
i have the air vent mount and it works great with any phone including my incredible.
Click to expand...
Click to collapse
I have the same one, picked it up from microcenter
http://www.microcenter.com/single_product_results.phtml?product_id=0281093
works well with my innocase active. but sometimes when you secure the dinc in place the mounts grips will press the volume button. its not too hard to position it in the middle of the rocker so it wont adjust it, and it not a problem once you have it set in there.
would buy again
I've tried several different mounts and haven't been happy with any, until now. I picked up a couple of the SoundGate M2 universal docks from wiredforless.com and could not be happier. The install was simple, once mounted it looks great and folds down into almost nothing. I don't know if it's still available, but I used discount code WOOT and got two of the mounts and shipping for $14.95.
AND, it works great with the Seidio case I have.
Great product, couldn't be happier.
Teksu said:
I have the same one, picked it up from microcenter
http://www.microcenter.com/single_product_results.phtml?product_id=0281093
works well with my innocase active. but sometimes when you secure the dinc in place the mounts grips will press the volume button. its not too hard to position it in the middle of the rocker so it wont adjust it, and it not a problem once you have it set in there.
would buy again
Click to expand...
Click to collapse
i position the left clasps to the bottom and the right ones to the center.. that ensures the volume button doesnt get pressed.
mike.d said:
My plan is to get the car mount from htcpedia and the innocase holster for the Surface. Then either switch out the belt clips (hopefully), or just use my dremel on the innocase holster belt-clip to cut out the same as the mount's beltclip.
A little more expensive, but seems to be the best "factory-type" option I can come with.
Click to expand...
Click to collapse
You can switch out the belt clip on the car kit holster with the Seido clip, I've done it. Just tap out the pins in both clips, place the spring back in between the clip and the holster and tap one of the pins back in. Works like a charm. Now I'm trying to get all the audio and charging done with a modified 12 pin micro usb from the TV OUT cable.
I did reviews on these:
http://www.youtube.com/watch?v=awh6QP8-BBE
http://www.youtube.com/watch?v=e2MaD_ZOKCo
Highly recommend these and I use with my Seidio II.
Can anyone suggest a not too expensive car mount that fits the tmo HD2? the windshield kind, not the vent kind.
NOt sure..but this is the best one!
http://www.proclipusa.com/home/home.aspx?afid=42&admkt=670ca577&gclid=CKTHtJipw6QCFUNM5Qod1Wf8iw
I found a perfect mount at compusa that is made for an iphone but works great on my HD2. can send part number if needed.
Sent from my SGH-T959 using XDA App
I use the Tetrax Xway. It requires a magnet on the back of the case. I initially thought it would be annoying but I positioned it in the very middle of the phone so the phone can spin on it. I can't tell you how much enjoyment being able to spin my phone has been. With a good twirl it can spin for 2 minutes 30 seconds. I really freaked people out when Inception was big as it seemed to never stop spinning like that totem.
But the actual mount attaches to the car's AC vent which is the perfect position. The center console just seems too far away. It can be just to the right of the steering wheel.
An additional benefit is with a neodymium magnet set I got from ThinkGeek I can mount the phone anywhere that's metal. I just take four of the little cylindrical magnets and form a square with them. The phone magnet fits quite well in the divet in the middle of them. I now have a phone mount on the hood of the oven to load recipes while I cook (or watch a movie). It's quite secure, and the magnet won't hurt the phone. Just keep anything with a hard drive away like an iPod.
An interesting possibility would be to buy a cheaper clip on cover from eBay (preferably black) then buy a cheap gps mount. Then glue the case onto the mount. Then you will have an adjustable $10-15 cheap car mount
i wonder if they would make one that fits hd2 that has an otterbox case on it
let me record out of the windshield... ie. let me record what i see when I drive...
I know, it's kind of a weird request, but is there one that will let me do this?
I highly doubt it, there is finally a company just now making a dock for the inc...but still not released yet. youre better off modifying an existing car mount to get that option or make something....can't be too difficult
Sent from my ADR6300 using XDA App
if i remember correctly.. the holster on the htc car dock has the camera cutout so you should be able to use it. the holster mounts to the dock and lets you rotate it to landscape so that should let you see out
I have a mount like this from VZ.. It captures the mount in the scene, but could probably be modded.
Best Buy sells an adjustable universal window mount setup that works perfect. You can virtually adjust it any way to make it fit, and would work great for your application. Plus, the side grips have a nice foam type material that would soak up a lot of vibrations.
luvit said:
I have a mount like this from VZ.. It captures the mount in the scene, but could probably be modded.
Click to expand...
Click to collapse
You could use a drill bit slightly larger than the camera whole. I actually have that verizon clip, and I think a mod would work quite well.
Sent from my ADR6300 using XDA App
No no, it captures the suction cup in the view.. Not the phone cradle.
Check out the M25 Sound dock on amazon. I have one, the angle is adjustable, and it steers out the window.
UnRevoked HTC Incredible
You could always get one of those non-sliding, weighted suction cup mounts that go on your dash then use any mount and place it facing the windshield.
You could always try to eBay a cheap universal mount and cheap DInc case, then super glue them together for a cheap custom fit case
There's a car mount on eBay called the SlipGrip that has a ton of different mounting solutions and custom molded cradles for the DINC in various kinds of 3rd party cases (Otterbox, silicone, VZW case, naked). The suction cup mount has a nice long adjustable arm so you could mount it with the suction cup on your dash rather than the windshield and adjust the cradle so the arm isn't in the shot. The cradle also rotates 180 degrees so you can record vertical or horizontal.
I will sell you one for $50 that is really nice. The cradle is made for the phone and you can suction mount it to your window or glass nightstand table. I will post pics in the morning.
This might not be the right place, but I can't find an answer - is there a car dock that will fit the Seidio 3500 battery? I don't know if the large battery causes any problems with car docks, but I would assume it does...
i use one thats actually for a I*hone. It clips and leaves the camera unobstructed.
Can you guys post any highly rated car docks for this phone, im going to get in a ****en accident one of these days using my google nav.
thanks...best friends
I've ordered one of these http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150533595603&ssPageName=ADME:B:EOIBSA:GB:1123
As soon as it turns up (ship to UK) i'll post a review.
i'm still using the same Generic Universal Car Dock since my HTC Athena times, until now
mine is Air Vent mounted, which is more secure
all the air suction for the windshield are not always working, over time it hardens and doesn't work anymore
lots of good choices from DealExtreme
I use this one that I posted in another car dock thread.
http://forum.xda-developers.com/showpost.php?p=10196993&postcount=11
BruceCLin said:
I use this one that I posted in another car dock thread.
http://forum.xda-developers.com/showpost.php?p=10196993&postcount=11
Click to expand...
Click to collapse
I almost bought that one, but I didn't like how it didn't have anything holding the Nexus S from the side. And I don't like windshield mounts. (Yes, I know it had a dashboard mount but I'll get to that in a second).
I ended up buying: http://tinyurl.com/63eh7wh
The windshield mount worked fine, has a little lever to push to generate suction and the hold is very strong. However, like I mentioned before, I don't like windshield mounts. Next step was to try the dashboard. Now, I don't know if it's because of the way my dashboard is shaped(curved, ratherthan flat) but the little stickypad thing never stuck. I ended up giving up on and settling for the air vent mount which works fantastic! Looks great, nothing obstructing my view, and the hold is almost as strong as the windshield. I'm very pleased.
On this mount, the USB port is not obstructed but the headphone point is. The bottom "legs" are also not adjustable.
Carmount
I just bought one of these from CarphoneWarehouse. It is a suction windscreen mount with an extra dashboard pad (plus double sided sticky pad) which I didnt use. The suction mount is pretty good. The extension that comes with it is too wobly though !
http://www.amazon.co.uk/Griffin-Win...XYJY/ref=sr_1_1?ie=UTF8&qid=1295539220&sr=8-1
The Google Nexus S fits nicely........
Just took delivery of one of these today, fit and build quality is excellent. Been using Brodit for years, to me nothing comes close.
Sorry.... as I'm new I can't post a link however Mobilefun in the UK do Brodit and had the passive holder in yesterday - sold out already I see.
Google (from UK) Brodit Nexus S and you should be able to get it from there.
Also maybe try DSL developments, I think they are the UK Importer.
dgjlee said:
I've ordered one of these http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150533595603&ssPageName=ADME:B:EOIBSA:GB:1123
As soon as it turns up (ship to UK) i'll post a review.
Click to expand...
Click to collapse
Looks interesting, I will be curious of your review of this, and its stability.
BruceCLin said:
I use this one that I posted in another car dock thread.
http://forum.xda-developers.com/showpost.php?p=10196993&postcount=11
Click to expand...
Click to collapse
I am also using this Arkon mount that BruceCLin recommended (thanks!) in landscape mode on my windshield. The mount is pretty sturdy with very little movement during driving. It has a very tight spring that keeps the phone clamped securely in place. This is temporary until ProClip comes out with a holder for the Nexus S.
unremarked said:
I almost bought that one, but I didn't like how it didn't have anything holding the Nexus S from the side. And I don't like windshield mounts. (Yes, I know it had a dashboard mount but I'll get to that in a second).
I ended up buying: http://tinyurl.com/63eh7wh
The windshield mount worked fine, has a little lever to push to generate suction and the hold is very strong. However, like I mentioned before, I don't like windshield mounts. Next step was to try the dashboard. Now, I don't know if it's because of the way my dashboard is shaped(curved, ratherthan flat) but the little stickypad thing never stuck. I ended up giving up on and settling for the air vent mount which works fantastic! Looks great, nothing obstructing my view, and the hold is almost as strong as the windshield. I'm very pleased.
On this mount, the USB port is not obstructed but the headphone point is. The bottom "legs" are also not adjustable.
Click to expand...
Click to collapse
The most sticky part of the dashboard part is in the middle. I have an '08 Civic and almost the whole dashboard is somewhat curved. I found a spot where it's flat, but the dashboard part doesn't cover all of it, just enough where all the stickiness in the center sticks to it and stays tight.
As for the legs, it is adjustable. I bought that exact same one you linked and got it today. You need to use some force to take those legs off or adjust it. I just took mine off since it was annoying to due where the ports were located.
Bmerz said:
Looks interesting, I will be curious of your review of this, and its stability.
Click to expand...
Click to collapse
Should turn up any day now. Hope it was worth the wait!
Do any of these car docks swivel from vertical to horizontal??
So I had a burning desire to mount my Nexus 7 in my car (2008 Dodge Charger) for some time. But all of the docks/mounts out right now either use suction cups, are bulky, or block significant portions of the head unit in the vehicle already.
This has been a bit of an obsession, trying to find something that would work the way I wanted it to. I had a vehicle specific bracket that I used for my Sirius radio a few years ago. It has holes drilled for the AMPS universal mounting pattern. This is what I decided to utilize at this time. Just a few pics and links for now until I get some better pictures later.
AMPS T-Bracket
Arkon Slim Grip. I actually used the one that came with my ARKON Windshield mount, but I'm pretty sure they're the same thing.
This vehicle specific bracket was from Bracketron, however, it was purchased 3 or 4 years ago, so I don't believe it is made any longer. I couldn't find it on their website. However, a few other companies make vehicle specific brackets, and Panavise was on the ones I found with a quick search. I like the AMPS mounting system because it's fairly modular. Stay away from the RAM mounts, even though they make some very excellent products, they generally use proprietary accessories for their mounts.
LINKS
Arkon Slim-Grip Holder (I purchased the Windshield mount, but it's the same holder, I believe)
http://www.amazon.com/Arkon-Slim-Gr...ckaging/dp/tech-data/B0056G142G/ref=de_a_smtd
Arkon VSM AMPS adapter
http://www.amazon.com/gp/product/B002BA503Y/ref=oh_details_o01_s00_i00
I also use the Belkin BT adapter for playback of music. It's pretty much awful for anything besides phone calls.
http://www.amazon.com/Belkin-Blueto...&keywords=belkin+bluetooth+car+hands-free+kit
I'll update later on.
nice
it is nice what you have done.
I have the exact same car dodge charger 2008 SE and I would like to know how I can remove the factory stereo that comes with the car ( same as the one you have in the pictures) and put the nexus 7 in its place.
if anyone had done this kind of project please send me the details on how to do it
Very cool and nice setup you have there although it seems like if you have a passenger in the car with you their view of the screen wouldn't be so good since it's on an angle.
One thing I'd like to know is though, is that bracket permanently attached to the car or is it just a matter of sliding in and sliding out that bracket that is between the crack there?
jonnyg1097 said:
Very cool and nice setup you have there although it seems like if you have a passenger in the car with you their view of the screen wouldn't be so good since it's on an angle.
One thing I'd like to know is though, is that bracket permanently attached to the car or is it just a matter of sliding in and sliding out that bracket that is between the crack there?
Click to expand...
Click to collapse
Thank you. I do have passengers that ride with me, but 90% of the time it's just me traveling for work. I didn't do this with them in mind. lol. However one modification I'll likely be doing to it is adding tilt/swivel adjust. Had it originally planned, but haven't found my solution yet.
The bracket is affixed to the car with the screws in the radio bezel. This makes it much more sturdy.
This isn't the same exact bracket as mine, but it's a similar one from Panavise. It uses the same screws.