is there or could someone make a kernel that can be overclocked to 1.2 Ghz nd with Voodoo but only REQUIREMENT is that it disables the full battery popup.i have searched for days on how to disable it and found the secret code but nothing happens when i do it. Thanks in advanceI have firefly 2.2
what rom are you using?
havent seen that pop up in a looong time
Yeah, almost every ROM out there now has that disabled. And Voodoo does not support OC.
s2h2golf said:
Yeah, almost every ROM out there now has that disabled. And Voodoo does not support OC.
Click to expand...
Click to collapse
voodoo doesn't support oc? Since when? Glitterballs is oc at 1280 mhz by default and uses voodoo.
Sent from my SGH-I897 using XDA App
That's a rom issue, not kernel.
Sent from my GT-I9000 using Tapatalk
studacris said:
voodoo doesn't support oc? Since when? Glitterballs is oc at 1280 mhz by default and uses voodoo.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Yep, I stand corrected. Most OC kernels now use the Universal Lagfix - forgot about glitterballs kernel.
i have firefly 2.2
Related
My set cpu prenium wont let me overclock over 1000mHz. It should be possible to get it to 1.2gHz. Help please?
Sent from my GT-I9000 using xda premium
If you sre on a stock kernal you wont be able to oc.
I have darkcore
Sent from my GT-I9000 using xda premium
Which Rom ? Dark core may not be a kernal that can be over clocked, was it the kernal that came with the Rom ? If so its still a stock kernal and you may need to flash another one.
Hay dude just download GalaxianGt or Semaphore 1.5.0 these are OC Kernel....i dnt think so darkcore is overclocked.
Sent from my GT-I9000 using XDA App
has anyone tested ''ANDROID overclock''? under 10% batery crasht :/ anyway, very good app
Try Tegrak OverClock app, for OverClock
j3tz3 said:
I have darkcore
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I don't think hardcore can be overcloked, try semaphore or another.kernel.
Sent from my GT-I9000 using XDA App
Right,darkcore is not for OC. Take Semaphore, Talon or Galaxian
U can OverClock a DC, but u need a TegrakOverClock App , bcz i install a OC module, like Voodoo Control Plus App
can i ask how i oc semaphore 1.7.0. until 1.5.0 i was able oc with setcpu,now in 1.6.0 and 1.7.0 i can't,what i need som script if i unerstand write.
i now my english its everything but fine.
obssesd said:
can i ask how i oc semaphore 1.7.0. until 1.5.0 i was able oc with setcpu,now in 1.6.0 and 1.7.0 i can't,what i need som script if i unerstand write.
i now my english its everything but fine.
Click to expand...
Click to collapse
Maybe try Voltage Control App
Dfolt said:
U can OverClock a DC, but u need a TegrakOverClock App , bcz i install a OC module, like Voodoo Control Plus App
Click to expand...
Click to collapse
Yeah you right,but with other is easy
But maybe ur kernel is not supported by other Programs,
no ,i figure out,i haven't now how to use script,but,now i do.no app could hellp,you just need to copy something from res-scripts to etc-init.d,enable oc must copy.thanks anyway
I flashed Onecosmic's ICS RC3 and Have downloaded NStools from market but so far all the frequencies I've tried for Overclocking are not stable.So I was wondering if someone has succeded in overclocking the rom with stability could share their values here. All the stuff,live oc,processor frequency and voltages.
Hi. Have you read this guide ?
why do you want to oc, first wait til there is a stable version of ICS ;-)
Im running Onecosmic's ICS RC3 and allready now its fast
Sanael said:
Hi. Have you read this guide ?
Click to expand...
Click to collapse
Ya I've read that and I've triead almost all frequencies shbmitted their and i can't get a stable configuration on any of them.And that is for glitch kernel and Onecosmic's RC3 is using Platypus so i thought that maybe I can get some different settings that will work. Anyways,thanx.
Do you have problems with oc only in ICS? Maybe try another kernel! I used RC2.11 with a few different kernels, but a little oc (1200+5%live oc) always worked for me.
I overclocked it to 1460
Sent from my GT-I9000 using xda premium
omarbenjdida said:
I overclocked it to 1460
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Share ur settings if u did..
lovedonator said:
Share ur settings if u did..
Click to expand...
Click to collapse
just use Android overclock and the nstools
Sent from my GT-I9000 using xda premium
omarbenjdida said:
just use Android overclock and the nstools
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
So from what i understand u have not used live oc and have just oc'ed ur processor?
End result???
So did you finally succeed? I have tried quite a few voltages, and the maximum my phone has stayed up with any OC/Custom voltage setting is a few minutes.
_____________________________
SGS
ICY GLITH V14
CM9 Nightly 4.0.4
Hi
I have install setCpu on my touchpad (64G) with the latest nightly (cm-9-20121111-NIGHTLY-tenderloin)
It seems to work fine and stats tells that i am up to 1.5GHZ.
I have seen on the forum the GamerZ kernel tuned to OC the touchpad.
Question is simple, is there a benefit from installing this kernel or setCpu is enough, or both are meant to live together ?
Thanks
Well, there is the GPU OC, which really helps with fps if your TP can handle it...
Sent from my cm_tenderloin using xda premium
-SGA- said:
Well, there is the GPU OC, which really helps with fps if your TP can handle it...
Sent from my cm_tenderloin using xda premium
Click to expand...
Click to collapse
So if i install this kernel, there is no need for setcpu ?
ethome said:
So if i install this kernel, there is no need for setcpu ?
Click to expand...
Click to collapse
With the GamerZ kernel you'll be able to OC to 2.something ghz and the GPU will be overclocked
SetCPU is used to adjust the frequencies.
So there's the problem. If I overclock my phone to 1.2GHz (or 1.4), it freezes at some point when using it (it can freeze on first seconds of booting up or it can freeze after few days). Battery pull is necessary to reboot it, of course. After that it's working agian but there's a question of time when will it freeze again.
Running CM10 stable, Mackay kernel, using NSTools to OC.
Sent from SGS GT-i9000 using magic.
Some phones (like mine) can't handle too much overclock. Most phones can only handle 114% OC to have still stable operation.
Device: GT-i9000
Rom: JB 4.2.1 C-RoM Mix v4
Kernel: Mackay 0.232
Baseband: I9000DXJV9
How do I set the lower value of hertz? Is there any other OC controlling apps for this kernel?
Sent from SGS GT-i9000 using magic.
Sorry, in Mackay kernel the intermediate OC 1100 & 1300MHz were removed by its Developer due to instabilities being experienced by users.
If you want a lower OC, you can use another kernel like Semaphore and Devil.
Device: GT-i9000
Rom: JB 4.2.1 C-RoM Mix v5
Kernel: Mackay 0.232
Baseband: I9000DXJV9
LiveOC or normal? Hardly any SGS handles any more than 114% LiveOC, but if it's not then you might want to try devil kernel for OC stability...
Sent from my GT-I9000 using xda premium
Hr Kristian said:
LiveOC or normal? Hardly any SGS handles any more than 114% LiveOC, but if it's not then you might want to try devil kernel for OC stability...
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Mine is solid at 124% live oc using semaphore
My semaphore manager app doesn't even let me go past 120%
124%, that's great, but most of what I've seen here and heard from friends makes me think you're one of the lucky exceptions...
Do you adjust voltage?
Sent from my GT-I9000 using xda premium
Hr Kristian said:
My semaphore manager app doesn't even let me go past 120%
124%, that's great, but most of what I've seen here and heard from friends makes me think you're one of the lucky exceptions...
Do you adjust voltage?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I used semaphore +nstools without adjusting voltages. Definitely my phone is a lucky exception. It could handle 1.6ghz overclock using glitch kernel (which, sadly, isn't supported anymore)
Hey all..
So i'm following this thread and it asks to find an undervolted kernel :/
Well.. I don't have one.. as well as my ROM is stock JPJV6 GB.. and it's lag fixed.. with vodoo kernel
I looked it up and found that OC/UV Beater2 can undervolt you kernel but it says that my kernel doesn't support it.. what do I do now??
You need to flash a kernel that supports under volting. Eg Semaphore.
Sent from my Nexus 4 using Tapatalk 2
snapper.fishes said:
You need to flash a kernel that supports under volting. Eg Semaphore.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Do I have to disable the lagfix? and does Semaphore has lagfix?
I think everyone is using voodoo lag fix nowadays, so it should be fine even if you leave lag fix on. However, make sure you are flashing the version for Samsung rom, not AOSP roms.
Sent from my Nexus 4 using Tapatalk 2