Database Develop

Tegrak overclocking for SGS-HELP

I just installed tegrak overlocking on my sgs fone. Pls help me what settings will i use. im running android 2.3.3. pls help

You need a kernel that supports overclocking. For values just look in the Glitch-kernel-thread. And I prefer 'Voltage Control'.
Sent from my GT-I9000 using XDA Premium App

hi. i saw the thread. WOW too techy for me. i dont know where to start and what to look for

Just look at the values.
Sent from my GT-I9000 using XDA Premium App

i dont know what is my rom? if cvm or maui? i mean cm

Go to Settings -> About phone then you'll see what's your ROM.

how will i know if im CM7 or maui as my fone doesnt say so

errrr if you're talking about the tegrak overclocking app, it does overclocking by itself without the need for a custom kernel or other app. that is its purpose *facepalm*
Try set OC to 1.2 GHz and see how that goes. if it makes the phone reboot/not work properly, click on "optimisation" and increase the voltage value for 1200 a little bit (ie. 25 or 50 mv). You can apply the same principles when attempting higher GHz too.

actually ive installed voltage control but it says my fone's kernel does not support voltage control. What kernel will i install so i can overclock my fone. Pls see below my firmware:
Firmware version: 2.3.3
Baseband version: I9000 XXJVO
Kernel Version: 2.6.35.7-i9000XWJVH-CL184813
Build Number: GINGERBREAD.XWJVO

@oswade i followed your instructions. my fone did not boot at 1.2 ghz. what does it mean?

by the way i read from other thread that stock kernel cant be overclocked that i need a custom kernel for overclocking? if this is true then installing tegrak overclock is useless except for custom kernel?

softpinkishlips said:
by the way i read from other thread that stock kernel cant be overclocked that i need a custom kernel for overclocking? if this is true then installing tegrak overclock is useless except for custom kernel?
Click to expand...
Click to collapse
Yes, you need a custom kernel.
And be sure to have the kernel cleaning script on your sdcard to, it can provide flashing if you have made sh*t.
Available here: http://forum.xda-developers.com/showthread.php?t=1053304

Thanks Lunchbox!! However i find it complicated and im scared to do it. i guess ill be needing a tutor for this.

Tank u very much!

softpinkishlips said:
Thanks Lunchbox!! However i find it complicated and im scared to do it. i guess ill be needing a tutor for this.
Click to expand...
Click to collapse
Why?
You lookbfor a kernel that fits your firmwareversion and that supports oc. You have to flash this kernel via Odin oder CWM (there are always installation instructions in each kernel-thread). Then you download 'Voltage Control' out of the market, set your CPU frequency and you are done.
Sent from hell to take your soul

Sent from my GT-I9000 using XDA Premium App

Ok lunchbox ill try.
Sent from my GT-I9000 using XDA Premium App

Darkcore kernel over clock..

Hi. I just looked at the dev section but couldn't find the right darkcore kernel that would allow me to overclock my phone. Does anyone know a modded darkcore kernel that can be overclocked?? And is compatible with darkys rom 10.2 extreme edition?? Thanks...
Sent from my GT-I9000 using XDA Premium App

Anyone???
Sent from my GT-I9000 via XDA Premium App.
Rom: Darkys Rom 10.2

Quite a few peoples are using Semaphore dude! Works a treat with Darkys 10.2.
I think Semaphore JVQ_1.3.3 in particular as Darkys is JVQ based.

DarkCore doesn't support OC / UV.

Semaphore 1.4 worked perfectly when I was on Darky 10.2. Didn't try OC/UV though.

Galaxian has been said to work nice with 10.2 aswell and has UV/OC

scapula101 said:
Hi. I just looked at the dev section but couldn't find the right darkcore kernel that would allow me to overclock my phone. Does anyone know a modded darkcore kernel that can be overclocked?? And is compatible with darkys rom 10.2 extreme edition?? Thanks...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Semaphore allow OC. And it is stable too.
About phone:
GT-I9000
I9000XXJVQ
Semaphore_JVQ_1.3.3
DarkyROM JVQ v10.2
(GO Launcher, GO SMS, GO Contact)

Check the DarkyRom forums beta rom section for the XXJVR rom (my url's get truncated so the title is here - [ROM][CWM][SGS+Cappy] DarkyROM XXJVR BASE
).
Download Tegrak app from Market which will still allow you to overclock. There have been a few iterations and believe Dark Core 3.0 is latest version. I am at DC 2.9.3 and was able to OC to 1.1 (1.2 hung on me but I understand am on a beta).
While I have SetCPU, I cannot OC but Tegrak app works on Dark Core (don't know how).

I checked the tegrak overclock app. I have the ultimate version and saw that I can set cpu freq to 2000 I think... I have the dark core from darky 10.2. I am not sure what.values to set on the app to have either overclock of 1100 or 1200 freq..
Sent from my GT-I9000 via XDA Premium App.
Rom: Darkys Rom 10.2

So far haven't gotten stable results passed 1.1. Keep getting hangs which need reboot. Even suspect about 1.1 so have kept quiet. Be curious what others have as well.
Sent from my GT-I9000 using XDA Premium App

Overclocking Onecosmic's ICS RC3

I flashed Onecosmic's ICS RC3 and Have downloaded NStools from market but so far all the frequencies I've tried for Overclocking are not stable.So I was wondering if someone has succeded in overclocking the rom with stability could share their values here. All the stuff,live oc,processor frequency and voltages.

Hi. Have you read this guide ?

why do you want to oc, first wait til there is a stable version of ICS ;-)
Im running Onecosmic's ICS RC3 and allready now its fast

Sanael said:
Hi. Have you read this guide ?
Click to expand...
Click to collapse
Ya I've read that and I've triead almost all frequencies shbmitted their and i can't get a stable configuration on any of them.And that is for glitch kernel and Onecosmic's RC3 is using Platypus so i thought that maybe I can get some different settings that will work. Anyways,thanx.

Do you have problems with oc only in ICS? Maybe try another kernel! I used RC2.11 with a few different kernels, but a little oc (1200+5%live oc) always worked for me.

I overclocked it to 1460
Sent from my GT-I9000 using xda premium

omarbenjdida said:
I overclocked it to 1460
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Share ur settings if u did..

lovedonator said:
Share ur settings if u did..
Click to expand...
Click to collapse
just use Android overclock and the nstools
Sent from my GT-I9000 using xda premium

omarbenjdida said:
just use Android overclock and the nstools
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
So from what i understand u have not used live oc and have just oc'ed ur processor?

End result???
So did you finally succeed? I have tried quite a few voltages, and the maximum my phone has stayed up with any OC/Custom voltage setting is a few minutes.
_____________________________
SGS
ICY GLITH V14
CM9 Nightly 4.0.4

[Q] Overclocking Galaxy Mini

HI, I have a galaxy mini and i want to overclock it, i tried to but then it refused to switch on and i had to install the custom rom again! Here are my specs-
MODEL NUMBER- GT-S5570
ANDROID VERSION- 2.3.6
BASEBAND VERSION- S5570XWKT2
KERNEL VERSION- [email protected]#1
BUILD NUMBER- GINGERBREAD,JVKT1
Thats it! Please someone tell me which kernels and images to download to overclock my phone! Thanks in advance! http://forum.xda-developers.com/images/smilies/good.gif

Mraps98 said:
HI, I have a galaxy mini and i want to overclock it, i tried to but then it refused to switch on and i had to install the custom rom again! Here are my specs-
MODEL NUMBER- GT-S5570
ANDROID VERSION- 2.3.6
BASEBAND VERSION- S5570XWKT2
KERNEL VERSION- [email protected]#1
BUILD NUMBER- GINGERBREAD,JVKT1
Thats it! Please someone tell me which kernels and images to download to overclock my phone! Thanks in advance! http://forum.xda-developers.com/images/smilies/good.gif
Click to expand...
Click to collapse
If you are using stock ROM only, refer this:
http://forum.xda-developers.com/showthread.php?t=1485122

Thanks, but my rom is custom
Sent from my GT-S5570 using xda app-developers app

Custom roms already have the ability to overclock... Either go under settings or download setcpu.
Sent from my GT-S5570 using xda app-developers app

Thanks, now ill root my phone and install setcpu, hope it works, you rock man! Please Tell me if i need to do anything else
Sent from my GT-S5570 using xda app-developers app

I downloaded set cpu, but i couldn't go more than 600 mhz please help
Sent from my GT-S5570 using xda app-developers app

What's Custom Rom you used? I think your custom rom not support OC kernel
Sent from my GT-S5570 using xda app-developers app

Mraps98 said:
I downloaded set cpu, but i couldn't go more than 600 mhz please help
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
If your custom doesn't support oc, ask the developer for help lol. Alternatively, you could flash another kernel that supports oc. But you gotta get it right.
Sent from my GT-S5570 using xda app-developers app

Mraps98 said:
Thanks, now ill root my phone and install setcpu, hope it works, you rock man! Please Tell me if i need to do anything else
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
So if u still need to root you might be using a stock ROM not custom coz u need to be and ull be rooted when you have a custom ROM :/
Sent from my GT-S5570 using xda premium

My Custom rom
I am not sure if its custom or not, its called S5570_JVKT1_2.3.6 can you guys please tell me if its custom or not? please help me

Thank you all
I finally overcloekd my phone, thanks to you guys, it runs at 864mhz now, very fast, i used the kernel by godell (godell more)

Mraps98 said:
I am not sure if its custom or not, its called S5570_JVKT1_2.3.6 can you guys please tell me if its custom or not? please help me
Click to expand...
Click to collapse
It's stock

Mraps98 said:
I finally overcloekd my phone, thanks to you guys, it runs at 864mhz now, very fast, i used the kernel by godell (godell more)
Click to expand...
Click to collapse
I recommend to set the max cpu frequency around 729-806mhz, minimal to 245mhz and SmartAssV2 for the governor. I'ts fast enough and the battery live is good. If you set the cpu frequency to the max, your device will become unstable and the battery drain faster.
I'm just giving recommendations. So, everything is up to you.
(P.S. I'm new on XDA )

vengeance.RA said:
I recommend to set the max cpu frequency around 729-806mhz, minimal to 245mhz and SmartAssV2 for the governor. I'ts fast enough and the battery live is good. If you set the cpu frequency to the max, your device will become unstable and the battery drain faster.
I'm just giving recommendations. So, everything is up to you.
(P.S. I'm new on XDA )
Click to expand...
Click to collapse
First of all, welcome to XDA...
My OC is set at:
Min: 245MHz
Max: 729MHz
Governor: SmartAssV2
IO Scheduler: Deadline
SystemUI and stuff doesn't lag, but large apps lags sometimes but it's acceptable.

[Q] Gamerz kernel and setCPU

Hi
I have install setCpu on my touchpad (64G) with the latest nightly (cm-9-20121111-NIGHTLY-tenderloin)
It seems to work fine and stats tells that i am up to 1.5GHZ.
I have seen on the forum the GamerZ kernel tuned to OC the touchpad.
Question is simple, is there a benefit from installing this kernel or setCpu is enough, or both are meant to live together ?
Thanks

Well, there is the GPU OC, which really helps with fps if your TP can handle it...
Sent from my cm_tenderloin using xda premium

-SGA- said:
Well, there is the GPU OC, which really helps with fps if your TP can handle it...
Sent from my cm_tenderloin using xda premium
Click to expand...
Click to collapse
So if i install this kernel, there is no need for setcpu ?

ethome said:
So if i install this kernel, there is no need for setcpu ?
Click to expand...
Click to collapse
With the GamerZ kernel you'll be able to OC to 2.something ghz and the GPU will be overclocked
SetCPU is used to adjust the frequencies.