I just installed tegrak overlocking on my sgs fone. Pls help me what settings will i use. im running android 2.3.3. pls help
You need a kernel that supports overclocking. For values just look in the Glitch-kernel-thread. And I prefer 'Voltage Control'.
Sent from my GT-I9000 using XDA Premium App
hi. i saw the thread. WOW too techy for me. i dont know where to start and what to look for
Just look at the values.
Sent from my GT-I9000 using XDA Premium App
i dont know what is my rom? if cvm or maui? i mean cm
Go to Settings -> About phone then you'll see what's your ROM.
how will i know if im CM7 or maui as my fone doesnt say so
errrr if you're talking about the tegrak overclocking app, it does overclocking by itself without the need for a custom kernel or other app. that is its purpose *facepalm*
Try set OC to 1.2 GHz and see how that goes. if it makes the phone reboot/not work properly, click on "optimisation" and increase the voltage value for 1200 a little bit (ie. 25 or 50 mv). You can apply the same principles when attempting higher GHz too.
actually ive installed voltage control but it says my fone's kernel does not support voltage control. What kernel will i install so i can overclock my fone. Pls see below my firmware:
Firmware version: 2.3.3
Baseband version: I9000 XXJVO
Kernel Version: 2.6.35.7-i9000XWJVH-CL184813
Build Number: GINGERBREAD.XWJVO
@oswade i followed your instructions. my fone did not boot at 1.2 ghz. what does it mean?
by the way i read from other thread that stock kernel cant be overclocked that i need a custom kernel for overclocking? if this is true then installing tegrak overclock is useless except for custom kernel?
softpinkishlips said:
by the way i read from other thread that stock kernel cant be overclocked that i need a custom kernel for overclocking? if this is true then installing tegrak overclock is useless except for custom kernel?
Click to expand...
Click to collapse
Yes, you need a custom kernel.
And be sure to have the kernel cleaning script on your sdcard to, it can provide flashing if you have made sh*t.
Available here: http://forum.xda-developers.com/showthread.php?t=1053304
Thanks Lunchbox!! However i find it complicated and im scared to do it. i guess ill be needing a tutor for this.
Tank u very much!
softpinkishlips said:
Thanks Lunchbox!! However i find it complicated and im scared to do it. i guess ill be needing a tutor for this.
Click to expand...
Click to collapse
Why?
You lookbfor a kernel that fits your firmwareversion and that supports oc. You have to flash this kernel via Odin oder CWM (there are always installation instructions in each kernel-thread). Then you download 'Voltage Control' out of the market, set your CPU frequency and you are done.
Sent from hell to take your soul
Sent from my GT-I9000 using XDA Premium App
Ok lunchbox ill try.
Sent from my GT-I9000 using XDA Premium App
Related
My set cpu prenium wont let me overclock over 1000mHz. It should be possible to get it to 1.2gHz. Help please?
Sent from my GT-I9000 using xda premium
If you sre on a stock kernal you wont be able to oc.
I have darkcore
Sent from my GT-I9000 using xda premium
Which Rom ? Dark core may not be a kernal that can be over clocked, was it the kernal that came with the Rom ? If so its still a stock kernal and you may need to flash another one.
Hay dude just download GalaxianGt or Semaphore 1.5.0 these are OC Kernel....i dnt think so darkcore is overclocked.
Sent from my GT-I9000 using XDA App
has anyone tested ''ANDROID overclock''? under 10% batery crasht :/ anyway, very good app
Try Tegrak OverClock app, for OverClock
j3tz3 said:
I have darkcore
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I don't think hardcore can be overcloked, try semaphore or another.kernel.
Sent from my GT-I9000 using XDA App
Right,darkcore is not for OC. Take Semaphore, Talon or Galaxian
U can OverClock a DC, but u need a TegrakOverClock App , bcz i install a OC module, like Voodoo Control Plus App
can i ask how i oc semaphore 1.7.0. until 1.5.0 i was able oc with setcpu,now in 1.6.0 and 1.7.0 i can't,what i need som script if i unerstand write.
i now my english its everything but fine.
obssesd said:
can i ask how i oc semaphore 1.7.0. until 1.5.0 i was able oc with setcpu,now in 1.6.0 and 1.7.0 i can't,what i need som script if i unerstand write.
i now my english its everything but fine.
Click to expand...
Click to collapse
Maybe try Voltage Control App
Dfolt said:
U can OverClock a DC, but u need a TegrakOverClock App , bcz i install a OC module, like Voodoo Control Plus App
Click to expand...
Click to collapse
Yeah you right,but with other is easy
But maybe ur kernel is not supported by other Programs,
no ,i figure out,i haven't now how to use script,but,now i do.no app could hellp,you just need to copy something from res-scripts to etc-init.d,enable oc must copy.thanks anyway
A lot of conflicting info here and on rootzwiki.com. I just was asked by the play and trade guy to flash his captivate. All in trade for his pandoras battery and knowledge of its use. Basically fix my psp and I flash his phone. Ok I just want cm7 stable on here with a good oc kernel. Can I do like a mesmerize and odin flash a recovery and the. Flash cm7 and gapps reboot and do a kernel? What steps do I need to take. I see a lot about bricks in the captivate threads, are they easy to break? I'm told this o e is two years old. That would mean its probably ok with being able to get I to dl mode easy yeah?
Like I said alotta info floating around I just wanna do this right can a cm7 user break this down for me. It's an at&t phone if that matters.
Thanks in advance.
Sent from my PG86100 using Tapatalk
CM7 stable comes with an OC kernel. Just Odin in a kernel with CWM on it, then flash the CM7 zip.
Got a link to the right kernel to odin?
Sent from my PG86100 using Tapatalk
Flash the Glitch kernel as it OC's up to 1.7 ghz though I wouldn't recommend it.
Sent from my I897 using XDA App
bornjamerican said:
Flash the Glitch kernel as it OC's up to 1.7 ghz though I wouldn't recommend it.
Sent from my I897 using XDA App
Click to expand...
Click to collapse
I run glitch at 1.6 GHz Ondemand governor all day no problem !
Sent from my I897 using xda premium
I would say the Captivate is actually very difficult to brick, and going to CM7 has basically a 0% chance of a hard brick. As Aus_Azn points out, CM7 will overclock with the default kernal.
Install instructions (as long as you are coming from Eclair or Froyo) are here: http://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide
CM7 discussion belongs here. Thread closed.
Can I overclock without installing other roms? just using the rooted stock 3.2 rom only.
answers will be very much appreciated
eecyaj said:
Can I overclock without installing other roms? just using the rooted stock 3.2 rom only.
answers will be very much appreciated
Click to expand...
Click to collapse
just need root and custom kernel that supports it
do you have a link on how to do it?
I would like to have link too
Sent from my GT-P7310 using xda premium
Tutorial
Here is a vid tutorial on rooting that worked great for me..
http://forum.xda-developers.com/showthread.php?t=1483561
Here is the kernel I used to overclock.
http://forum.xda-developers.com/showthread.php?t=1344330
For the kernel, pay attention to the vid. After you watch it you will understand how to flash the kernel or a different ROM if you want to go down that route.
Im running stock with this kernel at 1.5ghz. Works great. I used SetCPU to change clock speeds.
HI, I have a galaxy mini and i want to overclock it, i tried to but then it refused to switch on and i had to install the custom rom again! Here are my specs-
MODEL NUMBER- GT-S5570
ANDROID VERSION- 2.3.6
BASEBAND VERSION- S5570XWKT2
KERNEL VERSION- [email protected]#1
BUILD NUMBER- GINGERBREAD,JVKT1
Thats it! Please someone tell me which kernels and images to download to overclock my phone! Thanks in advance! http://forum.xda-developers.com/images/smilies/good.gif
Mraps98 said:
HI, I have a galaxy mini and i want to overclock it, i tried to but then it refused to switch on and i had to install the custom rom again! Here are my specs-
MODEL NUMBER- GT-S5570
ANDROID VERSION- 2.3.6
BASEBAND VERSION- S5570XWKT2
KERNEL VERSION- [email protected]#1
BUILD NUMBER- GINGERBREAD,JVKT1
Thats it! Please someone tell me which kernels and images to download to overclock my phone! Thanks in advance! http://forum.xda-developers.com/images/smilies/good.gif
Click to expand...
Click to collapse
If you are using stock ROM only, refer this:
http://forum.xda-developers.com/showthread.php?t=1485122
Thanks, but my rom is custom
Sent from my GT-S5570 using xda app-developers app
Custom roms already have the ability to overclock... Either go under settings or download setcpu.
Sent from my GT-S5570 using xda app-developers app
Thanks, now ill root my phone and install setcpu, hope it works, you rock man! Please Tell me if i need to do anything else
Sent from my GT-S5570 using xda app-developers app
I downloaded set cpu, but i couldn't go more than 600 mhz please help
Sent from my GT-S5570 using xda app-developers app
What's Custom Rom you used? I think your custom rom not support OC kernel
Sent from my GT-S5570 using xda app-developers app
Mraps98 said:
I downloaded set cpu, but i couldn't go more than 600 mhz please help
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
If your custom doesn't support oc, ask the developer for help lol. Alternatively, you could flash another kernel that supports oc. But you gotta get it right.
Sent from my GT-S5570 using xda app-developers app
Mraps98 said:
Thanks, now ill root my phone and install setcpu, hope it works, you rock man! Please Tell me if i need to do anything else
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
So if u still need to root you might be using a stock ROM not custom coz u need to be and ull be rooted when you have a custom ROM :/
Sent from my GT-S5570 using xda premium
My Custom rom
I am not sure if its custom or not, its called S5570_JVKT1_2.3.6 can you guys please tell me if its custom or not? please help me
Thank you all
I finally overcloekd my phone, thanks to you guys, it runs at 864mhz now, very fast, i used the kernel by godell (godell more)
Mraps98 said:
I am not sure if its custom or not, its called S5570_JVKT1_2.3.6 can you guys please tell me if its custom or not? please help me
Click to expand...
Click to collapse
It's stock
Mraps98 said:
I finally overcloekd my phone, thanks to you guys, it runs at 864mhz now, very fast, i used the kernel by godell (godell more)
Click to expand...
Click to collapse
I recommend to set the max cpu frequency around 729-806mhz, minimal to 245mhz and SmartAssV2 for the governor. I'ts fast enough and the battery live is good. If you set the cpu frequency to the max, your device will become unstable and the battery drain faster.
I'm just giving recommendations. So, everything is up to you.
(P.S. I'm new on XDA )
vengeance.RA said:
I recommend to set the max cpu frequency around 729-806mhz, minimal to 245mhz and SmartAssV2 for the governor. I'ts fast enough and the battery live is good. If you set the cpu frequency to the max, your device will become unstable and the battery drain faster.
I'm just giving recommendations. So, everything is up to you.
(P.S. I'm new on XDA )
Click to expand...
Click to collapse
First of all, welcome to XDA...
My OC is set at:
Min: 245MHz
Max: 729MHz
Governor: SmartAssV2
IO Scheduler: Deadline
SystemUI and stuff doesn't lag, but large apps lags sometimes but it's acceptable.
Hello guys.
I am about to use cm10.1. I would like to make my phone faster but overclock is rebooting my phone too often, also it gets hot really easily. Is there anything 'speed kernel compatible with cm10 / up ?
Sent from my GT-I9000 using xda premium
Zahovay said:
Hello guys.
I am about to use cm10.1. I would like to make my phone faster but overclock is rebooting my phone too often, also it gets hot really easily. Is there anything 'speed kernel compatible with cm10 / up ?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Semaphore kernel is compatible and fast
however, you have to play with the governors and scheduler to change speed without overclocking (also in stock kernel)
look your best configuration
Overclock
quack75 said:
Semaphore kernel is compatible and fast
however, you have to play with the governors and scheduler to change speed without overclocking (also in stock kernel)
look your best configuration
Click to expand...
Click to collapse
Could u give me a link about a thread that includes the kernel and the way how to set it up? I haven't done kernel change for ages..
And amm.. I don't mind overclocking but if I have to, I need one that does not reboot every 3rd minute...
Zahovay said:
Could u give me a link about a thread that includes the kernel and the way how to set it up? I haven't done kernel change for ages..
And amm.. I don't mind overclocking but if I have to, I need one that does not reboot every 3rd minute...
Click to expand...
Click to collapse
here it is
http://forum.xda-developers.com/showthread.php?t=1786220
and a tread for the app to manage the kernel ( is in a play store)
http://forum.xda-developers.com/showthread.php?t=1886686
quack75 said:
here it is
http://forum.xda-developers.com/showthread.php?t=1786220
and a tread for the app to manage the kernel ( is in a play store)
http://forum.xda-developers.com/showthread.php?t=1886686
Click to expand...
Click to collapse
I have to flash the kernel right after the flashed rom?
Zahovay said:
I have to flash the kernel right after the flashed rom?
Click to expand...
Click to collapse
yes