Database Develop

Tegrak overclocking for SGS-HELP

I just installed tegrak overlocking on my sgs fone. Pls help me what settings will i use. im running android 2.3.3. pls help

You need a kernel that supports overclocking. For values just look in the Glitch-kernel-thread. And I prefer 'Voltage Control'.
Sent from my GT-I9000 using XDA Premium App

hi. i saw the thread. WOW too techy for me. i dont know where to start and what to look for

Just look at the values.
Sent from my GT-I9000 using XDA Premium App

i dont know what is my rom? if cvm or maui? i mean cm

Go to Settings -> About phone then you'll see what's your ROM.

how will i know if im CM7 or maui as my fone doesnt say so

errrr if you're talking about the tegrak overclocking app, it does overclocking by itself without the need for a custom kernel or other app. that is its purpose *facepalm*
Try set OC to 1.2 GHz and see how that goes. if it makes the phone reboot/not work properly, click on "optimisation" and increase the voltage value for 1200 a little bit (ie. 25 or 50 mv). You can apply the same principles when attempting higher GHz too.

actually ive installed voltage control but it says my fone's kernel does not support voltage control. What kernel will i install so i can overclock my fone. Pls see below my firmware:
Firmware version: 2.3.3
Baseband version: I9000 XXJVO
Kernel Version: 2.6.35.7-i9000XWJVH-CL184813
Build Number: GINGERBREAD.XWJVO

@oswade i followed your instructions. my fone did not boot at 1.2 ghz. what does it mean?

by the way i read from other thread that stock kernel cant be overclocked that i need a custom kernel for overclocking? if this is true then installing tegrak overclock is useless except for custom kernel?

softpinkishlips said:
by the way i read from other thread that stock kernel cant be overclocked that i need a custom kernel for overclocking? if this is true then installing tegrak overclock is useless except for custom kernel?
Click to expand...
Click to collapse
Yes, you need a custom kernel.
And be sure to have the kernel cleaning script on your sdcard to, it can provide flashing if you have made sh*t.
Available here: http://forum.xda-developers.com/showthread.php?t=1053304

Thanks Lunchbox!! However i find it complicated and im scared to do it. i guess ill be needing a tutor for this.

Tank u very much!

softpinkishlips said:
Thanks Lunchbox!! However i find it complicated and im scared to do it. i guess ill be needing a tutor for this.
Click to expand...
Click to collapse
Why?
You lookbfor a kernel that fits your firmwareversion and that supports oc. You have to flash this kernel via Odin oder CWM (there are always installation instructions in each kernel-thread). Then you download 'Voltage Control' out of the market, set your CPU frequency and you are done.
Sent from hell to take your soul

Sent from my GT-I9000 using XDA Premium App

Ok lunchbox ill try.
Sent from my GT-I9000 using XDA Premium App

Overclocking Onecosmic's ICS RC3

I flashed Onecosmic's ICS RC3 and Have downloaded NStools from market but so far all the frequencies I've tried for Overclocking are not stable.So I was wondering if someone has succeded in overclocking the rom with stability could share their values here. All the stuff,live oc,processor frequency and voltages.

Hi. Have you read this guide ?

why do you want to oc, first wait til there is a stable version of ICS ;-)
Im running Onecosmic's ICS RC3 and allready now its fast

Sanael said:
Hi. Have you read this guide ?
Click to expand...
Click to collapse
Ya I've read that and I've triead almost all frequencies shbmitted their and i can't get a stable configuration on any of them.And that is for glitch kernel and Onecosmic's RC3 is using Platypus so i thought that maybe I can get some different settings that will work. Anyways,thanx.

Do you have problems with oc only in ICS? Maybe try another kernel! I used RC2.11 with a few different kernels, but a little oc (1200+5%live oc) always worked for me.

I overclocked it to 1460
Sent from my GT-I9000 using xda premium

omarbenjdida said:
I overclocked it to 1460
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Share ur settings if u did..

lovedonator said:
Share ur settings if u did..
Click to expand...
Click to collapse
just use Android overclock and the nstools
Sent from my GT-I9000 using xda premium

omarbenjdida said:
just use Android overclock and the nstools
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
So from what i understand u have not used live oc and have just oc'ed ur processor?

End result???
So did you finally succeed? I have tried quite a few voltages, and the maximum my phone has stayed up with any OC/Custom voltage setting is a few minutes.
_____________________________
SGS
ICY GLITH V14
CM9 Nightly 4.0.4

[i9001]Is it possible to lower vibrations' sensitivity?

Hey, I just wanted to ask is it possible to lower the vibrations? Since I moved to ICS/JB i just can' t get used to it. In 2.3 roms they were much lower or i even could set them in settings.
So, is it possible to lower vibrations on JB?

Magic Stick said:
Hey, I just wanted to ask is it possible to lower the vibrations? Since I moved to ICS/JB i just can' t get used to it. In 2.3 roms they were much lower or i even could set them in settings.
So, is it possible to lower vibrations on JB?
Click to expand...
Click to collapse
I think the kernel semaphore has that option

Alexis0o said:
I think the kernel semaphore has that option
Click to expand...
Click to collapse
Thanks for reply, but as u can see from thread name, i do not own i9000, i have i9001 so this kernel would brick my device

Magic Stick said:
Thanks for reply, but as u can see from thread name, i do not own i9000, i have i9001 so this kernel would brick my device
Click to expand...
Click to collapse
Ops im sorry, i didn't see this..

What rom are you on? CM has vibration settings in system settings
Sent from my GT-I9000 using xda premium

Hr Kristian said:
What rom are you on? CM has vibration settings in system settings
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I' m using unofficial port of CM10 by ivendor, and looking in settings --> system i don' t see vibrations option.

If your kernel have a kernel manager, like:
Devil kernel - devil kernel manager
Semaphore - semaphore manager
You can look at your's if your kernel have one, google it
Sent from my GT-I9000 using xda premium

Under "about phone" you can see your kernel info, the stock CM10 kernel allows vibration control, and the setting is located in system settings somewhere, so you'll have to check your kernel, and then if the one you have isn't the stock, if it has a management app.
Sent from my GT-I9000 using xda premium

[Q] CM10 and 10.1 auto reboot

hi,
i've a galaxy s with Cyanogen Mod 10.1 Nightly intalled and currently up to date.
but i have a problem, my phone sometime reboot and i can't discover the cause of this.
i try to uninstall my apps one by one but with no positive results.
i thought the problem was the CM10.1 because is a nightly rom, so i've installed the stable version of CM10 but the problem appears again.
so now i have installed again the CM10.1 .
can someone help me with this problem ?
thanks a lot and sorry for my bad english

None can help me?

Deep idle enabled?
Sent from my GT-I9000 using xda app-developers app

Latrop said:
Deep idle enabled?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
hi, thanks for the answer.
i don't know it deep idle is enabled. how can i do to see this?
thanks

Check the nstools app if you don't have it, its on play store
Sent from my GT-I9000 using xda premium

maybe you flash the ROM something wrong and break the system
Sent from my GT-I9001 using xda premium

lomba91 said:
hi,
i've a galaxy s with Cyanogen Mod 10.1 Nightly intalled and currently up to date.
but i have a problem, my phone sometime reboot and i can't discover the cause of this.
i try to uninstall my apps one by one but with no positive results.
i thought the problem was the CM10.1 because is a nightly rom, so i've installed the stable version of CM10 but the problem appears again.
so now i have installed again the CM10.1 .
can someone help me with this problem ?
thanks a lot and sorry for my bad english
Click to expand...
Click to collapse
Which kernel you are using?
you may try this,
1) reflash the rom with full wipe.
2) if you are overclock the OC clear int.d and NStool setting or using kernel cleaning script
note: only use one kernel setting apps ( e.g NStool , semaphore manager and +++)
If you are using semaphore kernel try not to use NStool setting and semaphore manager.
Hope this will help. :fingers-crossed:

Samtan4326 said:
Which kernel you are using?
you may try this,
1) reflash the rom with full wipe.
2) if you are overclock the OC clear int.d and NStool setting or using kernel cleaning script
note: only use one kernel setting apps ( e.g NStool , semaphore manager and +++)
If you are using semaphore kernel try not to use NStool setting and semaphore manager.
Hope this will help. :fingers-crossed:
Click to expand...
Click to collapse
i've already flashed the rom with full wipe but nothing change.
i use the the cm10.1 kernel without overclock.
Latrop said:
Check the nstools app if you don't have it, its on play store
Click to expand...
Click to collapse
i've installed the nstools app and i have min CPU on 100mhz, max Cpu on 1000mhz and the ondemand governor.

Try a different kernel
Sent from my GT-I9000 using xda premium

Latrop said:
Try a different kernel
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
what kernel you think i sould try?

Semaphore if that don't work there's Mackay and devil as well
Sent from my GT-I9000 using xda premium

i've flashed semaphore kernel and reinstalled the cm 10.1 rom.
but there is always the same problem

In not sure mate sorry
Sent from my GT-I9000 using xda premium

i think the problem is the app of the sim card, because sometime it disappear from the drawer. This app is named "kit strumenti sim" (in italian) and is a default app...

I kinda have a similar problem with the OP. Except, my SGS (running CM10.1) only random reboots if I'm using another kernel, other than stock (mostly, I tried with Semaphore, diff builds). Any ideas anyone?
I would really like to use Semaphore, due to its deep idle and other options.
Sorry if I off-topic'ed here!

lomba91 said:
i've flashed semaphore kernel and reinstalled the cm 10.1 rom.
but there is always the same problem
Click to expand...
Click to collapse
if you flash semaphore kernel(2.9.++ is for 4.2.++ ROM) and reflash the cm10.1 rom yor kernel will change to cm10.1 stock kernel.
so the step should be flash the rom and reboot to recovery and flash the kernel you like. for me flash a new kernel i will clear the NStools settings and init.d directory from advanced clear before i flash any new kernel.

kernel flash fail ?

yo,
i have cm 10.2 and flashed the iodak v8 via cwm but after reboot my info say its cm 10 kernel already and not iodak. I cleanred cache dalvik and tried some more times

you sure you downloaded the cm10.2 kernel ? and not the cm10.1?
Sent from my LG-P880 using xda app-developers app

iodakX3_v08CM10.2.zip

fastboot it?
Sent from my AOSP 4.3 Xperia S via Tapatalk

maybe the info says it's cm kernel just because iodak didn't change it in his modification? Check if you have the iodak features, just to be sure
Sent from my 4X HD via XDA Premium

what means fastboot it
i can change freq to 1700

If you can overclock it, you already have a custom kernel like iodak's installed as CM's kernel doesn't allow overclocking. iodak's kernel is based on CM's and he probably didn't change the version info.
Sent from my 4X HD via XDA Premium

is my gpu also overclocked how can i set gpu back to stock then?

xxlocalxx said:
is my gpu also overclocked how can i set gpu back to stock then?
Click to expand...
Click to collapse
use the benchmark to check your mobile clocks first. dont ask a question for something that maybe isnt happening !!!! so check once and then tell us exactly whats the problem and what u wanna do !

which benchmark shows the clock rates?

xxlocalxx said:
which benchmark shows the clock rates?
Click to expand...
Click to collapse
ah c mon do a little search.... in forum, in google search, in google apps, in other alternative stores, everywhere u see this antutu benchmark

i had it but it only shows my cpu clock

xxlocalxx said:
i had it but it only shows my cpu clock
Click to expand...
Click to collapse
ok. this is the search result. antutu is 1st there too. https://play.google.com/store/search?q=benchmark&hl=el
and this is link to antutu https://play.google.com/store/apps/details?id=com.antutu.ABenchMark&hl=el
sorry if link is in greek , its due to google . google see im from greece and uses greek. but the install button is the same and the app of course in the phone language

yes as i said i installed already and unter info it only show cpu clock