Hi. I just looked at the dev section but couldn't find the right darkcore kernel that would allow me to overclock my phone. Does anyone know a modded darkcore kernel that can be overclocked?? And is compatible with darkys rom 10.2 extreme edition?? Thanks...
Sent from my GT-I9000 using XDA Premium App
Anyone???
Sent from my GT-I9000 via XDA Premium App.
Rom: Darkys Rom 10.2
Quite a few peoples are using Semaphore dude! Works a treat with Darkys 10.2.
I think Semaphore JVQ_1.3.3 in particular as Darkys is JVQ based.
DarkCore doesn't support OC / UV.
Semaphore 1.4 worked perfectly when I was on Darky 10.2. Didn't try OC/UV though.
Galaxian has been said to work nice with 10.2 aswell and has UV/OC
scapula101 said:
Hi. I just looked at the dev section but couldn't find the right darkcore kernel that would allow me to overclock my phone. Does anyone know a modded darkcore kernel that can be overclocked?? And is compatible with darkys rom 10.2 extreme edition?? Thanks...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Semaphore allow OC. And it is stable too.
About phone:
GT-I9000
I9000XXJVQ
Semaphore_JVQ_1.3.3
DarkyROM JVQ v10.2
(GO Launcher, GO SMS, GO Contact)
Check the DarkyRom forums beta rom section for the XXJVR rom (my url's get truncated so the title is here - [ROM][CWM][SGS+Cappy] DarkyROM XXJVR BASE
).
Download Tegrak app from Market which will still allow you to overclock. There have been a few iterations and believe Dark Core 3.0 is latest version. I am at DC 2.9.3 and was able to OC to 1.1 (1.2 hung on me but I understand am on a beta).
While I have SetCPU, I cannot OC but Tegrak app works on Dark Core (don't know how).
I checked the tegrak overclock app. I have the ultimate version and saw that I can set cpu freq to 2000 I think... I have the dark core from darky 10.2. I am not sure what.values to set on the app to have either overclock of 1100 or 1200 freq..
Sent from my GT-I9000 via XDA Premium App.
Rom: Darkys Rom 10.2
So far haven't gotten stable results passed 1.1. Keep getting hangs which need reboot. Even suspect about 1.1 so have kept quiet. Be curious what others have as well.
Sent from my GT-I9000 using XDA Premium App
Related
Hi,
I flashed F1 Galaxy S2 V6 just now following the instructions but could not find the Darkcore 2.8 for XXJVP and I am getting 1357score in Quadrant Standand. Somewhere I read after flashing I should get 2300+ score.
Where can I find Darkcore 2.8 for XXJVP ?
My bad.....I just enabled lagfix and I am getting a score of 1900+.
Still unable to find Darkcore 2.8 for JVP...any help appreciated...
Sent from my GT-I9000 using XDA Premium App
akmal_waheed said:
My bad.....I just enabled lagfix and I am getting a score of 1900+.
Still unable to find Darkcore 2.8 for JVP...any help appreciated...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
what do you mean by unable to find Darkcore 2.8 for JVP?
do you try to find a link to download the kernel?
Yes...as per the flash instruction video, they want darkcore 2.8 for this rom.
I could not find any download link for that ...I an not sure whether we have darkcore 2.8 available...
Sent from my GT-I9000 using XDA Premium App
My set cpu prenium wont let me overclock over 1000mHz. It should be possible to get it to 1.2gHz. Help please?
Sent from my GT-I9000 using xda premium
If you sre on a stock kernal you wont be able to oc.
I have darkcore
Sent from my GT-I9000 using xda premium
Which Rom ? Dark core may not be a kernal that can be over clocked, was it the kernal that came with the Rom ? If so its still a stock kernal and you may need to flash another one.
Hay dude just download GalaxianGt or Semaphore 1.5.0 these are OC Kernel....i dnt think so darkcore is overclocked.
Sent from my GT-I9000 using XDA App
has anyone tested ''ANDROID overclock''? under 10% batery crasht :/ anyway, very good app
Try Tegrak OverClock app, for OverClock
j3tz3 said:
I have darkcore
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I don't think hardcore can be overcloked, try semaphore or another.kernel.
Sent from my GT-I9000 using XDA App
Right,darkcore is not for OC. Take Semaphore, Talon or Galaxian
U can OverClock a DC, but u need a TegrakOverClock App , bcz i install a OC module, like Voodoo Control Plus App
can i ask how i oc semaphore 1.7.0. until 1.5.0 i was able oc with setcpu,now in 1.6.0 and 1.7.0 i can't,what i need som script if i unerstand write.
i now my english its everything but fine.
obssesd said:
can i ask how i oc semaphore 1.7.0. until 1.5.0 i was able oc with setcpu,now in 1.6.0 and 1.7.0 i can't,what i need som script if i unerstand write.
i now my english its everything but fine.
Click to expand...
Click to collapse
Maybe try Voltage Control App
Dfolt said:
U can OverClock a DC, but u need a TegrakOverClock App , bcz i install a OC module, like Voodoo Control Plus App
Click to expand...
Click to collapse
Yeah you right,but with other is easy
But maybe ur kernel is not supported by other Programs,
no ,i figure out,i haven't now how to use script,but,now i do.no app could hellp,you just need to copy something from res-scripts to etc-init.d,enable oc must copy.thanks anyway
Please advice me as to which is the best kernel for JW4 gb rom. I am using Semaphore 2.7.4 sc and still find lots of lags and phone hanging. And also tweaked the cpu to Smartass.
Thanks !
Sent from my GT-I9000 using XDA
I'm using the cf root one and it works brilliantly very stable smooth and fast you should check out mods on Apps and themes section look for various mods there so good
Sent from my GT-I9000 using xda premium
sammyservices said:
Please advice me as to which is the best kernel for JW4 gb rom. I am using Semaphore 2.7.4 sc and still find lots of lags and phone hanging. And also tweaked the cpu to Smartass.
Thanks !
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
try devil's version for gb
@up
Agree. Everything is better then semaphore on GB.
You can try this
midnight-0.9.0/12-03-07
http://forum.xda-developers.com/showthread.php?t=1199140
Voodoo Galaxy S Gingerbread Kernel
http://forum.xda-developers.com/showthread.php?t=1225879
TalonDEV 0.5.1-RC1 340MB I9000 and I9000 0.6.0.1 TalonDEV bigmem or 340MB and bigmem
http://forum.xda-developers.com/showthread.php?t=1106075
DEVIL KERNEL!!!! BEST KERNEL EVER! Semaphore=Junk
The Devil Kernel is made to CM7 and MIUI. I suggest you try the new mdgb 0.5.1 Midnight = Simple, Customizable and Fluid
Gingerbread ROMS up to JW1: midnight-0.9.0
http://forum.xda-developers.com/attachment.php?attachmentid=935778&d=1331127709
Gingerbread ROMS from JW4: mngb-0.5.1
http://forum.xda-developers.com/attachment.php?attachmentid=1103531&d=1338728893
Can u please give me some guidance like sites and advices ?
Many thanks !
Sent from my GT-I9000 using XDA
semaphore!!!!!
Hello all,
I am currently running the CM10.1 (Android 4.2.1) with stock kernel. I've been searching for a kernel to install but that's where I've encountered a problem - I'm pretty new here..
So, what are your suggestions for a kernel? The only thing I care is performance!
Sent from my GT-I9000 using xda premium
use Semaphore JB 2.9.0 kernel
f.e. I can overclock my phone to 120% to all
ojojoj said:
use Semaphore JB 2.9.0 kernel
f.e. I can overclock my phone to 120% to all
Click to expand...
Click to collapse
+1 for semaphore 2.9, 120 live OC stable with mackay ROM 2.3.2. Benchmarks around 4400...have achieved 4600 once.
Sent from my GT-I9000 using xda premium
i use semaphore 2.9.0s they is very stable on my phone with 120% live oc and the Lazerdroid Tweak from Lenarox
I tested 3 Roms with this combination
Use Mackay kernel its faster than sema
Sent from my GT-I9000 using xda premium
Test both kernel and then you see what goes better with you
I've tested all kernels and for me the best performing is Devil.
conditions diatcu
midnight911 said:
I've tested all kernels and for me the best performing is Devil.
Click to expand...
Click to collapse
I prefer semaphore.
So there's the problem. If I overclock my phone to 1.2GHz (or 1.4), it freezes at some point when using it (it can freeze on first seconds of booting up or it can freeze after few days). Battery pull is necessary to reboot it, of course. After that it's working agian but there's a question of time when will it freeze again.
Running CM10 stable, Mackay kernel, using NSTools to OC.
Sent from SGS GT-i9000 using magic.
Some phones (like mine) can't handle too much overclock. Most phones can only handle 114% OC to have still stable operation.
Device: GT-i9000
Rom: JB 4.2.1 C-RoM Mix v4
Kernel: Mackay 0.232
Baseband: I9000DXJV9
How do I set the lower value of hertz? Is there any other OC controlling apps for this kernel?
Sent from SGS GT-i9000 using magic.
Sorry, in Mackay kernel the intermediate OC 1100 & 1300MHz were removed by its Developer due to instabilities being experienced by users.
If you want a lower OC, you can use another kernel like Semaphore and Devil.
Device: GT-i9000
Rom: JB 4.2.1 C-RoM Mix v5
Kernel: Mackay 0.232
Baseband: I9000DXJV9
LiveOC or normal? Hardly any SGS handles any more than 114% LiveOC, but if it's not then you might want to try devil kernel for OC stability...
Sent from my GT-I9000 using xda premium
Hr Kristian said:
LiveOC or normal? Hardly any SGS handles any more than 114% LiveOC, but if it's not then you might want to try devil kernel for OC stability...
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Mine is solid at 124% live oc using semaphore
My semaphore manager app doesn't even let me go past 120%
124%, that's great, but most of what I've seen here and heard from friends makes me think you're one of the lucky exceptions...
Do you adjust voltage?
Sent from my GT-I9000 using xda premium
Hr Kristian said:
My semaphore manager app doesn't even let me go past 120%
124%, that's great, but most of what I've seen here and heard from friends makes me think you're one of the lucky exceptions...
Do you adjust voltage?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I used semaphore +nstools without adjusting voltages. Definitely my phone is a lucky exception. It could handle 1.6ghz overclock using glitch kernel (which, sadly, isn't supported anymore)