I got a Nook Color recently. I've noticed its sides were kinda flimsy. Is this normal? I understand this isnt meant to be built like a tank but mine is kinda loose. Also when even applying a little amount of pressure I see the screen get affected (pressure on screen itself.)
Return? Or is it something common?
I've read a few posts about a creakey bezel. Luckily mine was not. The only imperfection I have is the black plastic that surrounds the n key is not flush with the screen on the right side but flush on the left.
Even more discouraging were the stories about dead / stuck pixels. Since I only had the before mentioned issue, I'm keeping mine.
So, although I believe B&N will take the unit back and exchange, if it doesn;t bother you that much and all else is well, I'd say keep it and enjoy it.
Alright thanks.
Mines the same way. Not really a total deal breaker for me, but its really annoying
Sent from one of those missing Droids
I apparently got pretty luck getting one with no imperfections to my knowledge...
the front of my brand new nook comes almost completely off and snaps right back on
.Same here, picked up the black silicone case and it covers the sides and makes it feel like one piece constructio(no help on the screen issue around the n),but makes it feel sturdy. And keeps it simple.Bought the official B&N for $20,I know they are five bucks on line but in my experience after market seldom fits like the "real deal" and after slapping it on I didn't want to take it off
ianPhillips1 said:
.Same here, picked up the black silicone case and it covers the sides and makes it feel like one piece constructio(no help on the screen issue around the n),but makes it feel sturdy. And keeps it simple.Bought the official B&N for $20,I know they are five bucks on line but in my experience after market seldom fits like the "real deal" and after slapping it on I didn't want to take it off
Click to expand...
Click to collapse
Im waiting for a black one. The blue and pink dont do it for me. Ive also got a normal b&n green book style case i transport in
Sent from one of those missing Droids
Mine creaks in the upper left corner. The back is somewhat lose in that area too. I haven't noticed any pressure on the screen though.
Related
invisibleSHIELD - Look it up for the Diamond my mate got it and it hardly shows any finger prints even after a days use and smudges whilst retaining the sheen of the device, also your back and front will be fully protected whilst keeping its form factor... if you have microscopic scratches like mine on screen that are obvious in well light conditions they will also disappear after application- ordered mine already...
Review and good pics... http://joeygadget.com/2007/08/15/on...-shield-screen-protector-for-iphone-and-treo/
They are available on ebay in most countries for Diamond - make sure you get the legit one as I am sure there are **** counterfits...
The ones for the iPhone are very hard to install and keep all of the little bubbles out, have plenty of patience when installing.
Although it is tough, the appearance after installation is extremely ugly.
Esp the screen.( no more grossy). I finally uninstalled it ( my wife said that my diamond is very ugly after the invisible shield, looks like an old PPC) and use other anti scratch screen protector and silicon case for body protection.
I have invisible shield for both 3g iphone and touch diamond...installation was easy actually but it doesnt look nice....u can tell theres something on the screen.
Would not recommend
I've already ordered one but couldn't installed it properly. It was very very hard and although I tried to be very carefully, still a lot of bubbles remained under the iShield. I put it off again and now I've got no screen protector anymore. Instead I use the original pocket case to wear the Diamond in my pocket. I think my fingers won't be able to scratch the display when touching it
Thanks for all the feedback
Interesting after install my friends one looked alright to me... hmmm I will post some pics after install and post my findings...
Anyone have a positive experience?
My friend's iPhone 3G looks MINT with it, literally can't tell it's there... But it was a ***** to install, especially around the corners.
I got one the other day and i'm sending it back, it looks apawling, far from invisible. I followed the instructions to the letter but couldn't get all of the little bubbles out, plus it just generally makes an expensive phone look like a piece of plastic junk.
Another thing is it doesn't actually cover the corners of the front of the phone so when i dropped mine the other day the corner got scratched.
Personally I wont use InvisibleSheild again as I believe their claims do not live up to the actual real world application.
shinobi_uk said:
I got one the other day and i'm sending it back, it looks apawling, far from invisible. I followed the instructions to the letter but couldn't get all of the little bubbles out, plus it just generally makes an expensive phone look like a piece of plastic junk.
Another thing is it doesn't actually cover the corners of the front of the phone so when i dropped mine the other day the corner got scratched.
Personally I wont use InvisibleSheild again as I believe their claims do not live up to the actual real world application.
Click to expand...
Click to collapse
Might make it look plastic, but I really can't say since my friend's iPhone IS plastic. Heh hopefully yours works out better, OP.
Mixed Views
Such mixed views - I have a feeling its down to having the patience to do the install properly - same my mates Diamond looks mint... hmmm
I had one of these for my Diamond and wasn't happy at all. I'm a very patient person but after a while it was just getting on my nerves. Trying to get it to bend around the case without leaving any air bubbles was just impossible. The parts that did stick down OK didn't look that nice either. It has a strange rubbery feel to it that I just don't like at all. I ended up ripping it off in frustration. Looked at their site and you can get your money back but you have to send it off to the states and I can't be bothered with the hassle or cost so I've just chalked it up as experience and will not recommend the product to anyone at all.
i bought and installed it right after getting my diamond. you can definetly see
that there's a protection layer on it and i wasn't at all satisfied for the first
week or so after application because the invisible shield felt sticky. it took me
the better part of 2 hours to get it right with no bubbles.
it's been some weeks now since installation and i'm pretty happy with the
shield. the stickyness is gone almost completely. i still can't slide my fingers or
stylus as smoothly over the touchscrees as without the shield tho.
in the end it's worth it for me because the device won't get any scratches at
all and i really hate scratches on my shiny devices
nuumuun said:
i bought and installed it right after getting my diamond. you can definetly see
that there's a protection layer on it and i wasn't at all satisfied for the first
week or so after application because the invisible shield felt sticky. it took me
the better part of 2 hours to get it right with no bubbles.
it's been some weeks now since installation and i'm pretty happy with the
shield. the stickyness is gone almost completely. i still can't slide my fingers or
stylus as smoothly over the touchscrees as without the shield tho.
in the end it's worth it for me because the device won't get any scratches at
all and i really hate scratches on my shiny devices
Click to expand...
Click to collapse
Would be great if you can post some pics front and back at a few angles in high light - not too much too ask surely lol oh and maybe put a cherry on top.
But seriously some pics would be great...
i just bought the diamond 2 today.. i must say, the out-of-the-box speeed is fantastic! but has anyone encountered the same problem as me : i feel that the back cover is a tad bit 'loose'. you can move it from left to right when u place 2 fingers at the sides of the back cover.
is it me or is it the phone?
Mine's tight, doesn't move at all.
ah crap, so i guess its just me? the movement is just a little though.. towards the end of the back cover.
No, i agree, my back cover it slightly loose, it moves slightly, but just enough to be noticeable...
hmm i wonder if it might be because the backcover is too light?
My cover is on quite tightly. No movement at all.. May be I am one of the lucky one this time. Try puting a small piece of paper to see if it stops the movement. If it does, then yours is loose alright. I had to do that for my xperia ...
will they do a replacement for a flimsy back cover? the movement is very slight though.
mine is tight. I expect back covers will be the first things that become available from the like of cnn.cn, mobilefunshop.co.uk, etc.
I noticed that the locking mechanism is at the bottom. Maybe a sharp of paper will make it tight ??
i had the same problem as here http://www.youtube.com/watch?v=OxubUhlpJxw , but i used paper scotch tape for house painters and now it is perfect
Mine is tight as hell, too: I even have great difficulty removing it: the shiny finish makes it quite slippy and a lot of force has to be exerted to disengage the locking mechanism. I even installed a software reset, to much hassle to acces the little red button ;-)
Maybe the build tolerance is a little bit variable and you were unlucky? where was your D2 build? Taiwan, or China?
how do i check where was it build at?
it's on mine as well. on the lower left side :/
geez so i guess majority of the people are experiencing it? whats up with htc!!! other than that i love the phone
Damn... My back cover is loose too! When did you get your device? I was one of the first (got it on the 17th of April). Maybe the first devices were not build that good... I'm going to put paper inside.
The back cover is very bad for everyone!
I hope that will be available soon to buy an alternative cover!
It would be nice to have it in metal or black leather.
I have no problem now with it but open the phone often for the SD card and soft reset I expect widening!
Mine was made in Taiwan and one of first in the Czech republic
d3sm0nd said:
Damn... My back cover is loose too! When did you get your device? I was one of the first (got it on the 17th of April). Maybe the first devices were not build that good... I'm going to put paper inside.
Click to expand...
Click to collapse
just got it like 3 days ago! im just worried that the problem might worsen over time?
I put a folded strip of paper between the battery and the backcover and it feels much sturdier now. Nevertheless the back cover is really ****ty, I swear I never seen such soft, thin and ugly piece of plastic before. Fortunately I like everything else on my D2.
My cover is completely firm, and my screen has no light leaks or gaps. I hope these are isolated issues being reported here. If your battery back is really nasty, then just swap it for another one, as it will reduce your enjoyment. Another advantage of this is that HTC monitors returns and will make changes to the manufacturing process based on issues. If there are no returns it will think everything is perfect!
In the UK we all get 14 days for returns.
I think the TD2 is the best non-keyboard phone at the moment, hopefully these are isolated incidents and will disappear over time!
I'm not sure what everyone is talking about and hope it's just a little movement you all are speaking of. Because if it is movemen like mine it is nothing really to complain about. The back to me feels solid and strong. The plastic is not flimsy. At the bottom the back moves a very little if you try to move it side to side. Mine moves less than, 1/4cm, a hair, an ants leg..... uhhh yeah. Pretty much nothing and you have to try to move it. Durring normal usage it is not noticable at all for me and doesn't move. The phone itself still feels solid despite having dust under the screen . I kinda wish it had a little bit more weight to it.
I know, this is due to a plastic build. It seems to be due to the back case that's causing it. It doesn't happen often, but at times I can certainly feel the phone creak. Though its got me thinking, is it just my phone or does others creak in a similar matter also? I didn't really expect this from such a high end device, but eh I guess I gotta learn to live with it.
I guess I could cover it up by getting a case that encases the phone, or see if I can find another back casing.
For what its worth, mine doesn't but as you say its plastic and im sure it wont be long before mine starts. I forgot to swap my MicroSD card out of my old phone when I got the phone and now im scared to take the cover off to put it in because that battery cover is so thin and flimsy.
mine doesnt squeak also
No creaking here. I did catch one of the buttons while squeezing and it triggered the haptic feedback but no creaking. The rear panel feels flimsy when detached, but when in place the phone feels reasonably solid to me.
TravUK said:
The rear panel feels flimsy when detached, but when in place the phone feels reasonably solid to me.
Click to expand...
Click to collapse
Maybe that's cause you're used to the Touch HD? I'm gonna make the switch from a Touch HD to the Galaxy S as well.
Seriosuly though, my Touch HD creaks only when handled in a certain way, maybe the same is true for the Galaxy S?
Regards.
Silverdragondk said:
Maybe that's cause you're used to the Touch HD?
Click to expand...
Click to collapse
lol, yeah maybe
I also have a Blackberry Bold 9700 and the case for that creaks way more than any noise I can get from the Samsung.
It happens to me sometimes when I try to get a better grip
The first few times I almost **** myself thinking I broke something
Mine seems to creak when I press the top bit of the phone (just above the grill thing above the Samsung logo), and sometimes at the sides also when I pick it up. It's not that bad, but I have terrible, terrible OCD and this can bug me sometimes.
Creaking? That reminds me of the g1 lol
Sent from my android device using tapatalk
blackerwater said:
Creaking? That reminds me of the g1 lol
Click to expand...
Click to collapse
and my HTC Magic xD
blackerwater said:
Creaking? That reminds me of the g1 lol
Sent from my android device using tapatalk
Click to expand...
Click to collapse
It certainly does. I got fed up of mine and sold it because of the non stop creaking from the bottom right corner of the screen.
i just got my SGS last week..... n its already making creaky noise when held tightly from the side..... is there a way to get a replacement???
Try tightening the small screws at the back. Turns out that the silver bezel is really loose out of the box for some units. Also, in some units, there is a small gap between the battery and the back plate. That makes it creak real bad though I doubt that is a structural error.
Sent from my GT-I9000 using XDA App
my left side creaks
mine does this sometimes, it doesn't bother me at all.
I get it here on the top of the phone in the middle.
Not worried about it, guess it gives it more personality
Now what I would really like, more cases so we can customize.
A matte or shinny steel back cover would be a nice addition
Anything really, to make it less iCrap 3 looking I hate people saying
it's an iCrap 3 and that I should get an iCrap 4
creaking silver bezel in the left bottom part here. I'm "glad" to see i'm not alone
Yups my SGS also creeks when I squeeze it from sides...
Sent from my HTC Desire using XDA App
Mine creeks when I squeeze it too ... This is what happens when they try to make a hightech phone cheaper ... if they used a better plastic or something else (the Iphone has murano glass from Italy .. WTF? ) the phone would be to expensive and many of us couldn't buy it ..! As long as it doesn't hurt the phone I don't mind ! The solution for me was the silicone case (and make the difference if you drop the phone !)
Mine does, only around the power button though.
Sent from my couch using XDA App
So, just have a quick question.. i just picked up a bc today, and have loved rooting it and modding it. But i noticed one thing, the back of the case (and somewhat the front too) around an inch below the power button has somebflex and creek. I don't think it is a huge problem,but am curious if this is normalor just mine. . .
Divine_Madcat said:
So, just have a quick question.. i just picked up a bc today, and have loved rooting it and modding it. But i noticed one thing, the back of the case (and somewhat the front too) around an inch below the power button has somebflex and creek. I don't think it is a huge problem,but am curious if this is normalor just mine. . .
Click to expand...
Click to collapse
Yeah I have seen a few others mention that and I can confirm that mine is the same. For that kind of price there has to be more than one thing that suffers and in this case it seems to be build quality to some extent.
My volume buttons feel loose and rattle easily, also if you tap the back of the nc you can feel that the case is not solid at all. I'm not really bothered by it though.
/mr
I haven't taken my nook apart but from the zdnet teardown picks it looks like you could put some foam or something inside the case to give it a better feel.
/mr
My book as a slight creak but only because i was looking for it, I couldn't tell otherwise. It is on the top of my book where the front bezel frame meets the case. It does not bother me. On my wife's book there is no creak at all. They probably should have glued or used adhesive along the edge of the bezel to prevent the minor flexing that creaks.
I have a similar issue on mine. Mine creaks right where your hand goes when holding it in portrait mode. I'm considering exchanging it for a different unit.
Many people are noticing this:
http://forum.xda-developers.com/showthread.php?t=859171
My apologies on a duplicate thread - i did a quick search and didn't find this.. i ll be sure to look better in the future.
I know there are videos on how to do it and it is relatively simple. My question is this, I was thinking about getting the white version of the N6 whenever stock becomes available, but I want to get the white version and then replace it with a black cover. Is this doable or has anyone done it/ have pics? I really do not like the midnight blue and black,
ifixit states that the rear cover is held on by some mild adhesive, but comes off relatively easy.
I was actually thinking about doing the same thing, but after having my white N6 for almost two weeks now, I'm actually really digging the white. I'm gonna keep it how it is.
LuckyHermit said:
ifixit states that the rear cover is held on by some mild adhesive, but comes off relatively easy.
I was actually thinking about doing the same thing, but after having my white N6 for almost two weeks now, I'm actually really digging the white. I'm gonna keep it how it is.
Click to expand...
Click to collapse
I wouldn't mind it so much if the front wasn't black. I think that is what would throw me off, so i suppose I could just buy a black case, but sometimes later in my phone's life when I don't care I don't use a case as often, lol.
Does it state what the adhesive is? Is it glue or...? I saw a video on it, but I thought it was snapped in place. That just means time to break out the double sided tape, which I have a ton of when I replaced my N2 screen, twice, ha.