Related
So I flashed the initial kernel file using ODIN3 to my captivate running Continuum __ and I'm getting stuck at the Galaxy S CyanogenMod screen. I was wondering if there is any way to fix this other than purchasing the resistors and making a jig...
Did you try flashing back to stock?
Sent from my SGH-I897 using XDA Premium App
Continuum is a Froyo ROM, right? Were you trying to pair a gingerbread kernel with a Froyo ROM?
Can you get into DL mode to odin back?
Sent from my SAMSUNG-SGH-I897 using XDA App
hmm flashing the WRONG kernel screwed you...
soo....
(insert logic here)
assistantstevie said:
So I flashed the initial kernel file using ODIN3 to my captivate running Continuum __ and I'm getting stuck at the Galaxy S CyanogenMod screen. I was wondering if there is any way to fix this other than purchasing the resistors and making a jig...
Click to expand...
Click to collapse
First off, what you described isnt even close to a brick.
You need to tell us a couple things. Can you get into download mode? have you tried to flash back to stock?
well the problem is that i cant get into download mode or boot into recovery
Anyway to "adb reboot download"?
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
nope cause i cant get the usb debugging to work since it wont boot at all
Been there once...what I did was...removed the battery ..and out my phone in Download mode...flashed back to Stock 2.1 and did everything again
You said you cant put it in DL mode? were your 3 button combo working when U flashed initial kernel?
Its definitely not bricked, try putting it into DL mode and flash to stock..
1. remove the usb cable, battery, sdcard, SIM.
2. wait 10 seconds, then insert the USB cable.
3. press and hold the 3 button combo while you insert the battery
4. continue to hold until phone's screen goes black twice and release power button.
5. timing is critical, it may not work the first time. Keep going until you see the COM port is connected properly.
well when i was flashing initial kernel i just did adb download and the flashed it and when i follow your steps it just puts me back to boot screen and i stay there
assistantstevie said:
well when i was flashing initial kernel i just did adb download and the flashed it and when i follow your steps it just puts me back to boot screen and i stay there
Click to expand...
Click to collapse
so did you read the instructions where it says to not use commands like "adb reboot download" or "adb reboot recovery"? and to make sure you had a working three button recovery before you attempted installation of the ROM?
oohh...i didnt check that, so is that what screwed it up? and if so how can i fix it?
Another one bites the dust...
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
assistantstevie said:
well when i was flashing initial kernel i just did adb download and the flashed it and when i follow your steps it just puts me back to boot screen and i stay there
Click to expand...
Click to collapse
Looks like you dont have 3-button combo and U still tried to flash CM7 ....next time PLEASE read the instruction...I think only Jig can help you....there r many threads which teaches you to make jigs.
assistantstevie said:
oohh...i didnt check that, so is that what screwed it up? and if so how can i fix it?
Click to expand...
Click to collapse
now you're boned until you get a jig. which is why it's very important to read the FAQ/instructions.
k thanks for all the help
build a jig yourself or buy one online. it will get you into the download mode:
http://cgi.ebay.com/ws/eBayISAPI.dl...84198&ssPageName=STRK:MESELX:IT#ht_782wt_1139
Hi Experts,
I have a Cappy and i love Continuum 5 ROM. I never miss any versions from beta2 to RC 3, everything is ok, but now when contimuum v5.1 was released. I tried to flash it but i got a big problem in that version. The first, i encountered Boot Loop issue while booting, but it's not the biggest problem, my cappy is still boot up to the home screen, and here everything was became very bad. My Cappy got lag and cant interact with return and it reboot automatic after that.
Now, when v5.1 was released, i believed it'll be fixed, but it's still exists. .
my cappy cant boot up to home screen. it repeats booting to continuum animation and restart forever.
can anybody give me a suggestion for turning my cappy back !!!!!!!! Please help
Did you have full battery? I made this mistake too... Be sure that you did everything correctly..
Sent from my captivate using XDA App
I would suspect you could simply use the 1-CLICK ODIN program to restore the phone then follow the steps carefully for 5.1 (which is a pretty awesome ROM btw)
I'm sure i charged full battery before flashing.
ProBoner said:
I would suspect you could simply use the 1-CLICK ODIN program to restore the phone then follow the steps carefully for 5.1 (which is a pretty awesome ROM btw)
Click to expand...
Click to collapse
i flashed to stock room with odin3 1.7 (using PDA + PIT files. i did that successful many times with 2.2 ). but now, with 2.3.3 i got brick( maybe lost boot), although flashed by odin without any errors ( 1 succeed/ failed 0) .
now i cant make the cappy go to download mode. please helppppp.
3 buttons with no interaction !!
sounds like u flashed a stock rom that didnt have old bootloader, safe way to have done it is with non 3 button fix odinoneclick flash to stock. dunno if a JIG will help u get back into download mode
CremeFraiche said:
sounds like u flashed a stock rom that didnt have old bootloader, safe way to have done it is with non 3 button fix odinoneclick flash to stock. dunno if a JIG will help u get back into download mode
Click to expand...
Click to collapse
Really, can i get back by using JIG ? My cappy cant boot up anymore. still pess power button but nothing was display.
longdct said:
Really, can i get back by using JIG ? My cappy cant boot up anymore. still pess power button but nothing was display.
Click to expand...
Click to collapse
You do know that download mode volume down and power, or volume down and usb connection? Figure might as well say cause I had what looked to be black screen before, but went in download mode. And can you not odin one click?
Ps. I have had stay black till reboot but if it give com port even with black screen it is in download mode
Sent from my GT-I9000 using XDA Premium App
leezrd said:
You do know that download mode volume down and power, or volume down and usb connection? Figure might as well say cause I had what looked to be black screen before, but went in download mode. And can you not odin one click?
Ps. I have had stay black till reboot but if it give com port even with black screen it is in download mode
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Thanks Leezrd, i tried these methods but nothing was happened. the Odin3 cant recognize any com port
longdct said:
Thanks Leezrd, i tried these methods but nothing was happened. the Odin3 cant recognize any com port
Click to expand...
Click to collapse
Have you tried odin one click I heard that if odin 3 doesn't work odin one click will
Sent from my GT-I9000 using XDA Premium App
leezrd said:
Have you tried odin one click I heard that if odin 3 doesn't work odin one click will
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I wish i have a chance to do this. but now i cant go to download mode. it makes me so sad.
longdct said:
I wish i have a chance to do this. but now i cant go to download mode. it makes me so sad.
Click to expand...
Click to collapse
Get a jig and use it to get into DL mode. Please make 100% sure you know what you are doing before you flash.
longdct said:
I wish i have a chance to do this. but now i cant go to download mode. it makes me so sad.
Click to expand...
Click to collapse
Use command command prompt. "/android" Then "adb shell" then "su" then "roboot download" might not work with adb but could give it a try
Sent from my GT-I9000 using XDA Premium App
zelendel said:
Get a jig and use it to get into DL mode. Please make 100% sure you know what you are doing before you flash.
Click to expand...
Click to collapse
thanks for your help. if it really lost bootloader, JIG has any effect? if terrible thing is true. can u tell me how i can do to relive my phone ?
longdct said:
thanks for your help. if it really lost bootloader, JIG has any effect? if terrible thing is true. can u tell me how i can do to relive my phone ?
Click to expand...
Click to collapse
Your best bet is the jig. If that doesnt work then I would try and get a warrenty replacment. I went over the thread and it stated that if you get a bootloop you should boot into recovery and reflash the rom, did you do that?
longdct said:
thanks for your help. if it really lost bootloader, JIG has any effect? if terrible thing is true. can u tell me how i can do to relive my phone ?
Click to expand...
Click to collapse
If you lost bootloader then you will have to JTAG, if your under warranty you can say you were updating to froyo and it turned off and never turned back on
Sent from my GT-I9000 using XDA Premium App
zelendel said:
Your best bet is the jig. If that doesnt work then I would try and get a warrenty replacment. I went over the thread and it stated that if you get a bootloop you should boot into recovery and reflash the rom, did you do that?
Click to expand...
Click to collapse
he can't get a turn on so probably not able to get in recovery but to OP with gb recovery is volume up and power
Sent from my GT-I9000 using XDA Premium App
i was having some issues gettin my captivate into download mode using odin to go back to stock also. what worked for me however was to have usb plugged into comp and phone and THEN hold volume up and down. port was then recognized and i went to download. badda bing badda boom.
zelendel said:
Your best bet is the jig. If that doesnt work then I would try and get a warrenty replacment. I went over the thread and it stated that if you get a bootloop you should boot into recovery and reflash the rom, did you do that?
Click to expand...
Click to collapse
right. i got a bootloop when flash to v5.2. i tried to flash the rom in recovery mode many times, but it's still exists. even i flash back to RC3. i got only the android text animation on the screen.
thus i have to flash to the stock by that way. and now i got a brick
I've had problems in the past with getting to download mode on the cappy. I did some googling trying to find a way, ended up finding a very good page on it:
http://samsungcaptivate.wikia.com/wiki/Putting_the_Phone_into_Download_Mode
I hope that helps.
Had the same problem with my cappy. The problem is that after all you did, you have one bootloader from i9000 and another from i897. The jig won`t help. I`ve found the people that recovered the phone with JTAG.
i have recently flashed my captivate with the latest version of ics . however i want to go back to stock,and i can not seem to get my phone into download mode, no matter what i try.i have tried everything except for a jig. can someone help me? would be much appreciated <3
Am too facing the same problem i had tried to flash Mosaic VIII Infused it installed also pretty well after reboot it simply stayed at some random colors screen n never booted up completely. and am trying to get it in to the download mode but its not going to down load mode even with the jig.
my phone is perfectly normal,running fine.
i just want to go back to stock,but download mode isnt working
crunkstep said:
i have recently flashed my captivate with the latest version of ics . however i want to go back to stock,and i can not seem to get my phone into download mode, no matter what i try.i have tried everything except for a jig. can someone help me? would be much appreciated <3
Click to expand...
Click to collapse
Jig was the only thing that worked for me.
Sent from my SGH-i897 using xda premium
banveerad said:
Am too facing the same problem i had tried to flash Mosaic VIII Infused it installed also pretty well after reboot it simply stayed at some random colors screen n never booted up completely. and am trying to get it in to the download mode but its not going to down load mode even with the jig.
Click to expand...
Click to collapse
Try reflashing back to ICS, then try the Jig. That's what I had to do.
Sent from my SGH-i897 using xda premium
now am able to get it to the download mode and trying to flash to original stock using odini3 one click but its not recognizing my phone anything else to be done?
banveerad said:
now am able to get it to the download mode and trying to flash to original stock using odini3 one click but its not recognizing my phone anything else to be done?
Click to expand...
Click to collapse
If you can get into recovery try flashing MyICS beta 1.12.11. On this rom my PC recognized my phone easily. It's a great rom but if you don't like it at least you should be able to use Odin.
Sent from my GT-I9000 using xda premium
crunkstep said:
my phone is perfectly normal,running fine.
i just want to go back to stock,but download mode isnt working
Click to expand...
Click to collapse
See my post above.
Sent from my GT-I9000 using xda premium
i am getting one soon ,thanks.
If your on ics you need nexus s drivers not the regular galaxy s drivers for your phone to be detected
Sent from my SAMSUNG-SGH-I897 using XDA App
I was trying to root/upgrade a captivate for a friend...
Had trouble, ended up restored to 2.1...rooted it and got into cwm, tried to load NYX ICS and phone would boot then black screen and I could hear the boot sounds...
Tried restore back to 2.1 and now I have the phone dots computer screen. I can get to download mode, but odin doesn't seem to want to work...
Any tips/tricks/ideas?
bigworm50 said:
I was trying to root/upgrade a captivate for a friend...
Had trouble, ended up restored to 2.1...rooted it and got into cwm, tried to load NYX ICS and phone would boot then black screen and I could hear the boot sounds...
Tried restore back to 2.1 and now I have the phone dots computer screen. I can get to download mode, but odin doesn't seem to want to work...
Any tips/tricks/ideas?
Click to expand...
Click to collapse
Sounds like to me you didn't have gingerbread bootloaders installed, instead had enclair bootloaders, you need to be on 2.3 gingerbread bootloaders to flash ICS. Try doing an odin one-click flash from here -> http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Using the kk4 odin with bootloaders, I would remove the external sdcard and the sim card first, just to be sure.
But flashing bootloaders you can hard brick your phone and it will need to get jtagged.
Read the forums and understand what you are doing.
As always, I am not responsible if this messes up your phone.
Good luck
Thanks, downloading now...Yeah I figured out the bootloader part afterward...guess I needed to do more reading before I jumped in...
Odin recognizes the phone, but then seems to hang on DO NOT TURN OFF TARGET!!. It does setup connection, initialization, then set pit file first...so it seems to be working...I am going to leave it for a long while and see.
How long should it take?
crt60 said:
Try doing an odin one-click flash from here -> http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Click to expand...
Click to collapse
So I tried a different usb port after reading some more and that kicked it in...so what do I need to do now to be able to load http://forum.xda-developers.com/showthread.php?t=1592141
sorry for the hand holding request, but I am out of my element with the captivate and gun shy after almost bricking it...
bigworm50 said:
so what do I need to do now to be able to load http://forum.xda-developers.com/showthread.php?t=1592141
Click to expand...
Click to collapse
Read the instruction in the op (original post) as to what to do. You will need to flash a kernel with clockwork mod.
Sent from my SAMSUNG-SGH-I897 using xda premium
I am confident following those directions. I was basically wondering if I was at the point of being able to follow them?
crt60 said:
Read the instruction in the op (original post) as to what to do. You will need to flash a kernel with clockwork mod.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
bigworm50 said:
I am confident following those directions. I was basically wondering if I was at the point of being able to follow them?
Click to expand...
Click to collapse
Assuming you are running gingerbread with gingerbread bootloaders and you can get CWM, then yes.
I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:
Avikar said:
I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:
Click to expand...
Click to collapse
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig
n205des said:
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig
Click to expand...
Click to collapse
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?
Avikar said:
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?
Click to expand...
Click to collapse
download this
http://www.mediafire.com/?sbjd049x4m36pb6
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...
Dude why the hell "junior" written under ur name, U RECOVERED MY PHONE.
n205des said:
download this
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...
Click to expand...
Click to collapse
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five
Avikar said:
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five
Click to expand...
Click to collapse
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel
but how to boot into cwm??
n205des said:
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel
Click to expand...
Click to collapse
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?
Avikar,
This Stickied thread will prove helpful.... Captivate - PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SAMSUNG-SGH-I747 using xda premium
Avikar said:
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?
Click to expand...
Click to collapse
volume+ volume- and power button is the combo for recovery..
Still not there.
n205des said:
volume+ volume- and power button is the combo for recovery..
Click to expand...
Click to collapse
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???
^
The KK4 Corn Kernel will only boot up and run if u r on KK4 firmware or a Rom of that base...or previous stock firmware/roms.
Sent from my SGH-I777 using xda premium
Avikar said:
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???
Click to expand...
Click to collapse
it does not boot in recovery,right?
have you tried through rom manager??
^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
but it can help by booting into recovery without the three button combo.
Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium
Still nothing.
4-2ndtwin said:
Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2
Avikar said:
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2
Click to expand...
Click to collapse
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843
Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Avikar said:
Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
try anything which you like
n205des said:
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843
Click to expand...
Click to collapse
As i mentioned stock rom 2.1 eclair from the same forum Bricks my phone,
Didnt try 2.2,
recently on the 2.3 from the same forum but no help...Instead of boot logo some white backgound with million colour dots appear and I can not
enter to recovery or download mode i have tried every thing,,,